MikroTik

Hi Normis, 1. As an admin or helper admin, I can go to the local site and quickly setup a vpn connection which I can use later when remote. 2. What about the opposite, I want to send my brother the ability to connect to my MT wireguard router a. from his device directly (no mt router), be it window...

There are easier ways to do illegal stuff, than to compromise a family member

I personally think this is more an imaginary problem, than reality. Maybe I just don't know as many digital criminals

share responsibly

P.S: how is this specific aspect different from VPN options any router has had for 30 years?

There is all kinds of smart technology involved, I can't share details. MikroTik knows nothing about the connections. Like I said, relay helps to establish hole-punched connections, but from then, the connection goes direct between users, not over relay. About use cases, one example I like is this: ...

You don't seem to get BTH idea at all, sorry about that. - BTH is free of charge if you have one of the supported devices (all new / currently manufactured mikrotik devices) - There is no middleman with access to your data, as opposed to traditional VPN providers - Data goes directly between mobile ...

BTH is nice if both devices are behind NAT.

The config is very strange, this is the cause of your issues. There are many weird things. Bridge with one port, firewall also wrong.
Also, have you tried 7.13 ?

Do a Netinstall with latest RouterOS v7.12.1

Why use crossover, when Wine works perfectly on macs? If you found an issue, let's solve it together, but there is no need to pay for commercial emulators

Rextended please stop posting with such confidence if you are not sure what you are talking about. "Is the same error on RouterOS source code" is wrong.

Use /ip firewall mangle to change MSS (maximum segment size) 40 bytes less than your connection MTU. For example, if you have encrypted PPPoE link with MTU=1492, set the mangle rule as follows: / ip firewall mangle add chain=forward protocol=tcp tcp-flags=syn action=change-mss tcp-mss=!0-1448 new-ms...

please try 7.13rc3 and see if there is improvement, there are fixes for multicore separation

protocol=tcp

?

First enable container functionality here:
https://help.mikrotik.com/docs/display/ROS/Device-mode

Do not follow random tutorials on googe. Looks like this one was 15 years old.

Just to a factory reset and the best possible wireless config will be applied.

Reset or reinstall will remove password

Check in the Settings - Show Advanced Connection Info, it will show how the connection was made - Direct, Relay, Relay hole-punched. Also in the settings you can try to disable holepunching and see if it makes a difference. another thing, check what you have in the app tunnel settings under allowed ...

The App simply creates a system standard VPN profile, the app itself does not do any VPN tunneling.

About DDNS update time, it is a known issue and will be fixed in the next release. Mfrey about your Android app - no other config should be needed. BTH works best with default config on home AP type devices. Maybe there is some more complex configuration on your device that is conflicting with BTH, ...

MikroTik devices are readily available, all of them. So what might be happening is that local distributor is not making orders, just waiting for you to order something. They maybe don't want to stock items without knowing, what people need. Don't just look at their catalog. Call or email them and te...

Yes, why are you setting speed limits here, and wondering why speed is limited?

/caps-man rates
add basic=6Mbps name="GN Only - No B Rates" supported=\
    6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps

remove all rates settings completely, and test again

No. It took longer for AX, because we switched from mikrotik in-house driver package (15 years old) to new chip manufacturer driver. Now all new hardware standard will come quickly.

Passwords do not expire on their own. This is misleading. This message can pop up in 2 ways: 1. You have not set a password yourself. It says you must set a password, because you forgot to set it up. 2. You or another admin of this device used /user expire-password command. By hand. Manually. There ...

I doubt that FT itself is the problem. It could be that your wifi1 and wifi2 have different security settings, so when iPad goes from one to the other, settings don't match and it fails.

When a device says incorrect password, it may be that you changed your encryption settings. Did you enable or disable WPA2 or WPA3? Then forget this device from your iPad and connect to it anew.

also clarify what means "did not work". Any error message in macOS? any message in RouterOS Logs?

Sorry about that. We will report it to the Sales department to sort it out with the company that provided us these photos. As compensation for this misunderstanding, would you be interested in a merch coupon and some mikrotik CHR licenses? If so, please write us to marketing@mikrotik.com

Apple devices will always choose 5GHz bands, unless the signal gets unusably bad.

Yea, could be Virus

Somebody with IP 192.168.0.188 is trying to guess your router password. Change SSH port, then go and find that person and teach them a lesson

When did you attempt those migrations? Have you reported the issues to support?

The same changes and sharing is already in Android app. It was simply released before iPhone

These photos were provided directly to MikroTik by the copyright owner (the company). Sorry if there was some misunderstanding

The 5GHz network couldn't be found at first. Now that I able to connect

Maybe the router found a radar. Delay means DFS radar scan is taking place. Are you sure the PC didn't connect to 2GHz while radar scan took place?

your own link to the documentation has the line "BGP: All known configurations will upgrade from 6.x to 7.x successfully."
Like I said, concrete specific examples are needed. What was wrong?

r50 and f24 can be seen there - it's only ssid and country.

still, OP needs to enable

/system logging add topics=wireless,debug

and check logs, when this disconnect happens.

Also, putting wireless router too close can cause strong interference. Keep a few meters distance.

Most likely you need Hairpin NAT:
https://www.youtube.com/watch?v=1I5FywY6opQ
https://help.mikrotik.com/docs/display/ ... HairpinNAT

In that case I don't understand what is not working. Please send an email to mikrotik support and include a supout,rif file and error message from the windows computer

please make a supout.rif file in the router at the time, when the tunnel is not working. and if you can - one more file, when it starts to work after reboot. send both files to support@mikrotik.com, it could be an issue with RouterOS

Like I said above, you can't use multiple devices with the same settings. You must use the new Share feature in the phone app, to make a separate tunnel for each new device.

snowman62 it should not be like that. If you have specific example, just make a report to support.

99% of people upgraded seemlessly. that's why I'm asking.

in the phone settings go to VPN configuation and delete there

RouterOS does not use any Docker code anywhere. It is not Docker.

snowman62 what are you talking about? this is some really old topic.
do you have any issue and need help?

Hello, I use BTH between an iPhone and an Audience. The Audience is behind a CGNAT (LTE) network. A reboot of Audience is necessary every day for it to work. Audience is connected to the internet but without reboot BTH from Iphone app no longer connects. I don't understand what's blocking it. Disab...

how to remove existing BTH functionality and start from the beginning with the new app?

IP -> Cloud -> BTH -> Revoke and Disable

We have released new Back To Home apps for both iPhone and Android. Some exciting new features have been added - sharing of tunnels. Normally you only could use one device to connect to the router (as seen above, using multiple devices causes problems). Now you can invite others to use your router, ...

What is that site? http://x1.c.lencr.org/
It doesn't work for me too. Try other sites maybe

Everything is correct in that description, maybe you did not understand the changes?
It says "wifi menu"

Use v7, it is time.
There will be no updates for v6

Or just stay on long-term where there is no error. Like I said, there is no new version. It is just confused software.

It is because we changed the label of this version to longterm. Number of version is the same, but timestamp is different, so the software is confused. You have two options: 1. Change to long-term channel and upgrade to the newer, but identical 6.49.10 2. Change to Upgrade channel and upgrade to v7

But we did get a lot of love from our current AC device users, did we not

Let's hope it pays back in the long term

Exactly right, holvoetn

Read our latest newsletter and learn more about:

* benefits and stock of Wi-Fi 6
* LtAP LTE6 kit (2023)
* CME Gateway (CAT-M)
* R11eL LTE mini-PCIe modems
* your MikroTik setup submissions and distributor success stories
* latest #MikroTips and tricks, and so much more!

https://mt.lv/news115

Well like the above poster said, radar detection happened already, but the result was, that there is no free channel to use, since radar overlaps the frequencies you selected. So you will have to use some other frequencies, if there is a radar operating nearby. Meaning the radar detection did not ta...

No, you need to share the existing tunnel with the share button, and then use QR/URL to configure the next device

Swipe up the drawer from bottom of the screen and select the new VPN.

And, as I am speaking, which VPN is best suited for Miktorik/Android/PC according to your experience?

this one - back to home (wireguard, but better)

Ullinator, that is not true. Nothing has to be changed on the CAP even in new capsman. Make a new topic, if you are not sure how to use it. There should be no reason to manually configure CAP clients.

*) defconf - use device factory preset credentials when using CAPs mode; This will make my life miserable :( Nothing changes in your workflow. When booting into CAP mode with the button, you don't need to connect to the CAP device. It gets all of it's wireless config from CAPsMAN. That is the whole...

It means that if you do a Factory Reset on Audience with earlier version, some incorrect wifi password could have been set on it, even if the device came without password from factory. Now it's fixed.

never use beta versions in routers that are used in real and important networks. use beta where you can reinstall with netinstall

I have talked to our bigger experts about this case, so to the OP: In your example you are comparing different architectures, you are saying your TILE router had only around 1% CPU useage, but in your ARM router it's around 25%, while as far as I can see, performance is still very good. This is beca...

One day this will be resolved, but not in Winbox 3.x

So that it's not just public disinformation, post your mikrotik ticket number where you were denied the source code.

It has already been done! We have been in contact with FSF.
Like I told you many times, you are basing your opionion on somebody who posted in the forum 10 years ago.
This is the wrong topic for this.

Did you read the rest of the page? Check point e)

not everyone agrees with this "logic", it is only one opinion, there is a lot of discussion about this in the open source world

If you need full GPL source, just email mikrotik, this topic is about 7.12 problems. Here nobody can give you source code.

this is not true.
-ac in this case is legacy (old) compatibility package.
we don't plan to make -be packages, it will always be wifi only

This is not true, I don't know what to tell you. Maybe you were banned from the forum for your style or angry writing, not for asking about gpl. Just let out your anger in some other place and simply go and ask mikrotik for the GPL source. Maybe if you tried it, you would know the truth.

What you write is complete nonsense. We have been giving out source code according to GPL requirements for many many years. This is why I asked if you only rely on 10 year old posts or you actually tried to ask yourself

Well, as far as I know, the GPL license obligates, that any work based on existing GPL-licensed project must also be licensed under GPL. MikroTik doesn't comply to this and that's why in the past there were some questions about this very issue, like https://forum.mikrotik.com/viewtopic.php?t=100746...

Yes, you understood the steps correctly. About the firewall, Yes, that's also true, you will have to first connect like you did before and disable the firewall for now. After you get the connection, you will have to set up a new firewall, depending on your needs. I don't know if I can guide you step...

There is capsman button for devices with wifiwave2 package. See above pictures

If you connect to the device using wifi, you will lose your connection to it, if you change what the wifi interface does so use Ethernet port for config. Your wireless interface is in "ap-bridge" mode (access point mode), you need it in "station" mode (client). Change it to that,...

MikroTik has nothing to do with TILE being discontinued. This is CPU manufacturer that stopped making them.

giannici try latest v7.13beta2 and see if there are improvements.

It's like the goverment builds a new road with very good surface and allowed speeds 140km/h and the driver with his very old car says "my car still does not go faster". will he complain to government, or is this common sense that you need a new car to safely drive at maximum speed?

I decided to test the new build. Installed on wap ac. after installation - routeros-7.13beta1-arm I reset to defconf From manual: "wifiwave2" package has been divided into distinct packages: "wifi-qcom" and "wifi-qcom-ac" After it installed "wifi-qcom-ac-7.13beta1...

Upgraded my RB5009 (CAPsMAN), hAP ax3 (CAP) and hAP ac3 (CAP) from 7.12rc5 to 7.13beta1 using the "check for updates" and everything went fine . RB5009 had wifiwave2 package before, now it only has routeros (since WiFi menu + CAPsMAN feature is now bundled). hAP ax3 had wifiwave2 package ...

Well both sides are correct.
We don't want to update every time PiHole changes their stuff.
But on the other hand, we do have special instructions for PiHole in the doc. So we added /admin/

Thanks for these details.
Just one more note from my side - hAP ac2 is an overall higher class device, bigger antennas etc.

If your PC has some 802.11b compatible card, 11Mbit is okey for it. So yes, tell us what card is used for testing

Of course the 802.11ax speeds can only be achieved if both devices support those speeds. If your computer has some older and slower wifi card, it will work at the speed of the old and slow wifi card, no matter how good your router model is.

Does your computer (device you are using to connect to hAP AX wifi) support 802.11ax ?

Let's start from the beginning again. Hope this helps: New Wireless packages From 7.13 we are separating the older wireless package out from routeros.npk bundle and renaming wifiwave2 package to wifi. The new wifi package is now part of the routeros.npk bundle, beginning a new and exciting era for w...

zandhaas use check for updates button and ignore the above ranting. nothing special has to be done. upgrade and forget

How is that relevant in this situation? Nothing has been broken, upgrade is transparent. Just ignore the capsman menu, you will get used to it.

Sorry did not see his post

This device has 1Gbit ports, so what is your plan to get more here? Can you explain in more detail about your idea? We have products with 10Gbit ports too

see above post

Please try 7.13beta1, we made several optimizations for your case (this CPU + MPLS)

Has anyone written to MikroTik?
This forum is not 100% of the time monitored by mikrotik staff.

Tangent, before spreading FUD (sure, there are valid concerns, but still), have you read the Container manual? First of all, you can't use containers with a read only user, as this feature requires a physical button push to enable it. Don't enable it on devices that have untrusted users. Simple. And...

RouterOS consists of things that many people don't use. Even in Windows you have menus you can't use.

Do you also have actual impact / problem in this case, or you are just seeing 25% CPU usage and that's all? Because from what I can tell, you are not using 75% of your CPU

You only installed bundle on RB951? You needed to use CHECK FOR UPDATES, see above instructions. Or you need to manually install wireless package new wifi package is available only on select few AC models (new ARM), not all of them. This is why you need to read the changelog and instructions in the ...

What model router do you have? Full model name

Did you enable the package too? Check if it's enabled in Packages menu

You can use both at the same time if you need to run two CAPsMANs, not if you just want to use wireless

holvoetn. You don't need "wireless" package. Just keep the wifi package. The new WIFI features like WPA3 are only available if you use the wifi package.
Wireless package is the old one

This is in the PiHole documentation. Please read it. You need to add /admin/ to the end of the URL

https://discourse.pi-hole.net/t/placeho ... er/60498/2

Just a tip for you all: To make the upgrade less confusing and more smooth, use check-for-updates from 7.12

Upgrade it back and license will be restored.
Apparently that version is not supported

let's say 7.12 is super stable and has zero bugs. after 3 months if it still is PERFECT. we may rename it to long-term That used to be different with 6.x... A version from stable never made it to long-term, instead we had new build with even more cherry-picked fixes. that's not true. first long-ter...

long-term is not a special version.
it is a "status" that is assigned to an existing version.

let's say 7.12 is super stable and has zero bugs. after 3 months if it still is PERFECT. we may rename it to long-term

in theory

Which existing version should become long-term?

send your supout.rif file to support@mikrotik.com from 7.12

sas2k, there are no other checboxes. What RouterOS version are you running?

like said above, ask the distributors.
we have stock for a while now, since summer at least.

most likely distributor through nobody wants those devices and did not order

For those who experience issues with the DoH service? Is "/certificate/settings/set crl-use=" set to "yes" on your routers? If it is "yes", then do DoH work if you change value to "no"? There is no such item in the winbox gui. Would you be so kind to provide ...

In my experience cloudflare is fastest and most reliable. I use their "family" address, that also blocks some stuff, that maybe pihole could miss
https://family.cloudflare-dns.com/dns-query

I also have PiHole in my home network. The PiHole uses the router as "upstream DNS". RouterOS has DoH So what happens is 1. computer asks PiHole for DNS info 2. pihole answers from cache ... if no cache, only then asks router 3. router asks DoH server This reduces the load to the DoH. You ...

All devices are in stock at MikroTik. If "your country" has no stock, you should ask (not just refresh the webpage) your local distributor and they will order what you need

I use nextDNS and Cloudflare, have not seen any issues. Try other providers and see, maybe it's just google

and now re enable together with the download option too:

/certificate settings
set crl-download=yes crl-use=yes

Andoid app "CellMapper"

without site survey with some measuring devices (or at least Cellmapper phone app survey tool) it's hard to say what bands you can see, what signal levels there are, etc.

Given this, I think the ATL should achive better results, am I right?

Like with all wireless things, there are too many unknown variables and only a real life comparison will get you an answer.

They both of the same modem, so really just difference in antenna design.If your 10-20km to nearest tower, perhaps the LHG be better. But the ATL's 4x4 MIMO is more likely to be faster if just a few km away to nearest BTS/tower.

i approve of this general guideline

Posted in the wrong browser tab

Ignore my message

Are you looking for PC, router, switch or PCI-e interface card? Original post is not clear

Image is missing. What is the problem? Latest v6 still shows "new version available", but there is no new version?

BTH is only in RouterOS BETA versions for now. 7.11.2 is not a beta

I will check why nobody has responded, but the ticket does not include much information. Please add what devices you tested, do the same devices fail all the time, or it's random, etc.

Yeah, terminology can differ between vendors. Just write what you want to achieve and why.
Sure, you can set it up as a bridge, just not from Quickset menu.

P.S: also why would you use another router, if this one can do everything?

hAP AX3 is not the same as hAP AC3. The AX models have a completely different wireless driver and whole config is different, different menus, features etc. It can't do the same things as the old AC models

To add to Reinis post - it means the port is not yet on. It will be turned on, when a device is connected.

there is already an account created with this email address.

like most websites on the internet ... click "recover password" or something like that

Tangent is right. This is a rural / remote area LTE AP not meant for such speeds. If you can get over 100Mbit via LTE, this device is not for you, check our other offerings for city / good coverage zones.

Have not heard that such issue is "known". Try this: 1. in Queues menu, go to Queue Types 2. add new, select type "cake", type any name for it, and leave everything else to default, click OK 3. go to interface queues tab and set all interfaces to the new cake type see if this mak...

support for what?
just ask your question

Those are completely unrelated products. Do not mix apples and oranges.

Do not provide access to the device to people who can "misclick" important config.

Edit: sorry, no NTP works. Maybe something else then. Just post your config.

Depending on the used frequency, the 5GHz can take even 10 minutes to show up, until the device scans for radars in your area.

Did you watch this one? https://youtu.be/taQ70m0DVYA?si=mvpo-T7fzvbtKUWV
Because you can see there, that there is no need to connect to the managed device. It enters CAP mode with a button push.

Nothing confusing here

LHG is the model name, all LHG models are LHG since this name means "Light Head Grid"

LHGG is part of the ORDER code. Maybe next one will be LHGD, or LHDA, does not matter, it's only used for ordering

See this doc: https://i.mt.lv/cdn/product_files/RB953 ... 191103.pdf
Quote:

"Three SMA connectors on top of the board, connected to the built-in three chain radio. Connectors are for
chains 0,1,2 in that order, from left to right (chain0 is next to the USB port)"

you can run it on any of the devices in your network, but I personally would put it on the hAP ax2, yes

First of all, did you upgrade it to RouterOS v7.12rc1 ? There are many improvements in latest versions.
Also, post your current wifi config

You will see when it comes out

new BTH will come in 7.13beta1

Try to manually specify the IP address of the capsman device in the "CAP" menu of the cAP

What kind of notifications are they?

In this case, discussion on the forum is a good idea too, as MikroTik are not from the UK and we don't know the local regulations so well. Regarding the above, there might be some overlap in the Ofcom rules themselves, as pointed out by one of our best wireless trainers. Will quote him, hope he does...

I have not heard about such case. Send the files like suggested above.

Supposedly?

1) Make supout.rif
2) Email to support@mikrotik.com

No config, no details, only guessing

question was not about where capsman is "listening", but where you physically plugged in the cAP device. That we can't know from the config.

Nice! Let us know if you need any help setting it up. Out of the box it should be usable for most setups, it will have a password (it's on the box and on the device). For windows use winbox (https://mt.lv/winbox64), you can also use the mikrotik smartphone app for the initial setup, it can be easier...

hEX S is an older device. The hAP ax2 is much faster in every way. You don't have to disable the WIFi, it will take nothing away from the performance. Why not use this as the step into mikrotik world, plus as a bonus, also test the WIFi. The only drawback is that PoE in and Out are both on the first...

My generic suggestion would be to make the setup like this: 1) router gives out PiHole IP address as the DNS server with DHCP (must change DHCP server network settings for this) 2) so PC uses PiHole as the DNS server 3) in PiHole configure the Router as the "upstream DNS" and uncheck any o...

1) Your PPPoE client setting is "use peer dns = yes" which means it will use ISP DNS
2) what is the PiHole IP address?

Sorry, why should it?

Check the section Log. Reason should be written there

CAPsMAN ir available in Winbox too

Screenshot 2023-10-05 at 12.01.52.jpg

Fediverse

That's exactly what I mean. DoH and better encryption for the users can't be done, while keeping network admin desire to block webpages. And at the same time, the network admin is complaining about telemetry of the browser. He wants to be secure himself, but still wants to spy on his own users

Can you post as much of your config as you can? Use export command and remove any irrelevant parts

Funny topic. You guys want firefox to be more secure and less secure at the same time

In Netinstall unselect "apply default config" and it will not apply factory config (which includes the password). Your device will not have any other config, but you can quickly apply some predefined settings with Winbox over MAC address and then selecing some QuickSet mode (or pasting you...

Can you all stop posting about "same issue" and just use ROSE package where SMB works better

?
This is why we made the ROSE package. To have better features and better speed.

make sure you are on the latest RouterOS version, then enable wireless debug logging (in system logging, add new rule with topics "wireless,debug"). Then see detailed logs during this disconnect

One more thing to consider - at this moment, all AX devices are in stock again. Don't wait too long

RB2011L is an older model, not really good for encryption, like above poster said. Something more modern like the L009 or hAP ax series would do better.
Also are you sure your connection to NordVPN is even that good?

Ah now I get it. If version X is latest version and after 30 days the same version is STILL the latest version, then upgrade? It makes sense, but also this situation will not be common, as we release new versons for other reasons too, not just because of problems. I still stand by what I said, if yo...

Yes, it will work on one of the CAPs, any CAP can be a CAPsMAN to itself. Our video actually has this scenario in the example https://youtu.be/taQ70m0DVYA?si=cNiSwBEeeLbt5ehC

Pro tip for anyone with a mixed AC/AX network. You can even run the CAPsMAN v2 on one of the cAP AX devices, so no extra hardware is needed.

If this is how the bug was described to support department, I can imagine why it has been hard to find.

Please provide much more details.

Nice idea for a scripting exercise, but just to let you know - MikroTik does not do this. There is no re-release or version pull. We always release a new version.

How are they connected? What kind of cameras? Do they use HUB or NVR or cloud ?

Do you have many such routers? You can just make a different branding package for each device

can you post new and correct config?

also why dst-address-type? if user specified the router as DNS server, it will be a local destination

all you need is port, protocol and action dst-nat. remove the other stuff.

action must be dst-nat
redirect is for using the router itself as dns server, not what you want

also you only need the dst-nat rules

Thank you for sharing. MikroTik has a long history and is jam packed with features on top of features, so understandibly, for new users it is a steep learning curve. One big benefit is that with MikroTik there are tons of learning resources, on youtube, on the web, also the training courses can be v...

Nice

Can you name a commercial VPN solution that has such functionality? We can't make a solution based on workarounds, especially if it's not supported in all OS.

I think that is a phone OS limitation. If I remember correctly, you can't use any VPN through mobile hotspot. Each connected device needs to connect on their own.

Like I said, the lack of RAM is not a problem.
There is no benefit for device with only 512MB RAM. You need 2GB to feel any difference.

64Bit OS takes up more space and can be even slower if you only have 512MB

All shop SXTR&FG621-EA still with the old high prices. Will there be no business with the old prices when the product code has remained the same?

new model is not in shops yet.

Webfig and Winbox are very similar, but Winbox is more user friendly, it has side by side windows and such features. It was an honest question. If one thing has something you need, why keep using the other thing ...

More specifically, there is no performance difference or any other gain to add 64bit support if you only have 128MB of RAM, the differences begin with bigger RAM.

What was the intended setup?
Most likely your device was configured in a way that the ETHERNET port is firewalled, as it was meant to be connected to the ISP.

Connect to the device from the wireless side, from the home network side

We will see if we can somehow make it show total and reserved, so it's clear, but even linux kernel does not show this reserved memory, so it will not be easy.

In your country is there like a whole range of blocked ports, or how does that work?

This model runs 32bit OS because it does not have enough resources to run 64 bit OS. Since it's a lightweight home device, there is practically no benefit anyway. It is the cheapest device after all.

We have already done that, it's called "device mode" https://help.mikrotik.com/docs/display/ROS/Device-mode

It will lock down your device if any suspicious activity is detected

You don't need any CVE for that. Please re-read the original post.
In theory you could even take the router apart and re-solder some chips on it. What is the point calling such situations "vulnerabilities"? If your device has full admin access to malicious parties, ALL IS LOST already

The device is designed to be used indoors where signal is good.
If you are in a bad signal zone, you should use our SXT LTE or wAP LTE products

1. MikroTik does not offer any kind of paid support and emails are answed in a few working days time. In Europe we do have the weekends off. 2. If you install x86 in trial mode, shut down the PC to stop the 24h timer. This will make sure you can make the purchase in time. SoftID should not change ei...

This is a switch. CPU has no relevance in this device. If you need BGP, forget about any CRS series device, you need CCR:
https://mikrotik.com/product/ccr2116_12g_4splus

However we do not yet have routers with copper 10G ports, only SFP+

No, time has nothing to do with router performance.

IP CLOUD time is very imprecise, it can vary a lot. Just configure NTP on your router to not have such random clock

We already have this https://mikrotik.com/product/crs312_4c_8xg_rm

all phones have power saving options and go to sleep if display is off.
yes, wifi also disconnects. what did you expect?

Can you guys clarify the use case of 2.5G ports but with PoE output? I thought this kind of switch was great for high end PC's, not for plugging in more routers?

The BTH config name matches the system VPN tunnel name already.
We plan to add "delete tunnel" feature in the app.

If you see such a situation that tunnel is not working, make a supout.rif file and email us, maybe support can see what happened.

In v7 we are trying to slim it down, it should become smaller

Search found 25803 matches