Community discussions

Search found 89 matches

by Duduhandelman
Fri Nov 10, 2017 10:02 pm
Forum: The Dude
Topic: Mass command execution
Replies: 6
Views: 2371

Re: Mass command execution

You will thank me for that...
I haven't tried it on routeros but I'm sure it will work.
Please use rundeck.. amazing opensource product to execute commands and scripts.

Enjoy
by Duduhandelman
Tue Aug 01, 2017 5:26 pm
Forum: General
Topic: Lost 3% ping (2 every 60)
Replies: 8
Views: 1370

Re: Lost 3% ping (2 every 60)

Are you monitoring the device via snmp or Dude
Maybe even a winbox that open can cause this.
Good luck.
by Duduhandelman
Sat Jun 17, 2017 10:04 am
Forum: General
Topic: FastTrack without NAT
Replies: 10
Views: 1318

Re: FastTrack without NAT

AMT.
As far as i know there is no firewall while using fastpath. And fasttrack is not working without nat.
So if you are using just a bridge and need performance use no firewall with fastpath.

Use a switch instead.
by Duduhandelman
Thu Jul 07, 2016 5:58 pm
Forum: General
Topic: QinQ crs
Replies: 0
Views: 360

QinQ crs

Hi All. Can someone please share configuration for the following scenario. I have a circuit that uses vlan 903. (tagged) There are 10 vlans that i wish to use on this circuit. I would like to do QinQ using the hardware switch. So on each side of the link there is a trunk port with vlans 200 to 210 w...
by Duduhandelman
Thu Jun 16, 2016 12:25 pm
Forum: Wireless Networking
Topic: Capsman and mobile Battery
Replies: 0
Views: 457

Capsman and mobile Battery

Hi All.
I have searched in the furom and i waa unable to find a clear answer for that.
Does power saving with capsman actually working?
Currently my device does not go to sleep. Many Thanks
by Duduhandelman
Mon Mar 21, 2016 5:00 pm
Forum: General
Topic: FastTrack without NAT
Replies: 10
Views: 1318

Re: FastTrack without NAT

Thanks Macgaiver.
You are correct I'm using bridge with firewall only for QOS I wanted to give my voip users better service.

Thanks
Again,,
by Duduhandelman
Mon Mar 21, 2016 4:42 pm
Forum: General
Topic: FastTrack without NAT
Replies: 10
Views: 1318

Re: FastTrack without NAT

Now I took it to the lab with the latest 6.35 rc34.
Fasttrack will not work on bridges....
I hope it's on the roadmap.
by Duduhandelman
Sun Mar 20, 2016 6:45 pm
Forum: General
Topic: FastTrack without NAT
Replies: 10
Views: 1318

Re: FastTrack without NAT

Thanks Jarda.
You are correct. I thought that i will be able to bypass everything for my voip data and queue all the other data.

I'm missing something here.

Maybe fasttrack is not working without routing.
by Duduhandelman
Sun Mar 20, 2016 1:36 pm
Forum: General
Topic: FastTrack without NAT
Replies: 10
Views: 1318

FastTrack without NAT

Hi All,
Is that possible to use FastTrack over bridge without NAT?
I'm unable to get it working with 6.32.4 counters remain zero on the dummy rule and ip settings. while fastrack rule and normal rule has the same counter.

Thank you,
by Duduhandelman
Wed Dec 23, 2015 3:54 pm
Forum: General
Topic: Stop Observium picking up all ports on CCR?
Replies: 1
Views: 569

Re: Stop Observium picking up all ports on CCR?

You should diabale those nics in the observium.
You can filter nics in the config.php file.
But first look at the observium modules maybe you can disable ppp something.

Good luck
by Duduhandelman
Sun Dec 20, 2015 3:55 pm
Forum: General
Topic: CAPSMAN Troubleshoot
Replies: 0
Views: 901

CAPSMAN Troubleshoot

Hi All, Maybe you can assist me to understund some issues with capsman. I have a CCR 1036 running a capsman and about 15 MAP2N. All is running 6.33.3. First of all I wish to understund why some caps interfaces are not running. # NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS 0 RS ether1 ether 1500...
by Duduhandelman
Mon Dec 14, 2015 4:26 pm
Forum: General
Topic: Eoip bonding question
Replies: 6
Views: 1346

Re: Eoip bonding question

Yes you can.

I have done it before using a lot of Hardware. Switch using LACP and 4 routeros devices and another switch with LACP at the remote site.
But the bandwidth is per mac so double bandwidth from different macs.


Enjoy.
by Duduhandelman
Tue Sep 29, 2015 4:03 pm
Forum: General
Topic: High Availability GRE ?
Replies: 10
Views: 1939

Re: High Availability GRE ?

Sorry but I'm using those two only why would you need a third backup?
by Duduhandelman
Tue Sep 29, 2015 5:41 am
Forum: General
Topic: High Availability GRE ?
Replies: 10
Views: 1939

Re: High Availability GRE ?

I'm currently doing that using pfsense.
Two firewalls using carp(vrrp) and sync the state table.
The magic is that the gre source and destination should use the carp ip.
Works like a champ for two years on dozen of installs.
by Duduhandelman
Mon Jul 13, 2015 9:41 pm
Forum: General
Topic: GRE over IPsec samba performance
Replies: 8
Views: 3934

Re: GRE over IPsec samba performance

To make it short don't use smb over wan.
It's a protcol which is waiting for samba acks (not tcp acks).
The only way that i know to uae samba over high latency wan is traffic acceleration.
It change the tcp to udp transparently.

You can try traffic squeezer or xpand networks.

Good luck.
by Duduhandelman
Tue Apr 14, 2015 7:54 am
Forum: Wireless Networking
Topic: Wifi keeps mobile device awake? [keepalive packets]
Replies: 81
Views: 28079

Re: Wifi keeps mobile device awake? [keepalive packets]

I'm using capsman with a lot of caps and I thought it beacuse of the roaimg between caps.
Now I can see the packets that prevent the device going to sleep.
Too bad it like this the capsman and caps are so great.

Any Idea on how to solve this?
by Duduhandelman
Fri Mar 13, 2015 11:03 am
Forum: General
Topic: feature request: Torch field
Replies: 0
Views: 651

feature request: Torch field

Hi All,
I think it will be very useful to able to view internal packet marks on torch even filter by mark would be awesome.

Thanks,,,
by Duduhandelman
Mon Feb 16, 2015 7:36 pm
Forum: General
Topic: Lldp power
Replies: 1
Views: 568

Lldp power

Hi All. I wanted to ask for an lldp feature in Mikrorik. Today i decided to install lldp on all of my linux servers and VMs so now every capable lldp switch is showing me the physical port mapping which is amazing. I know many have asked this before but now i can see the true benefits of it. Also th...
by Duduhandelman
Fri Feb 06, 2015 7:47 am
Forum: General
Topic: CCR1036-8G-2S+ NAT maxinum throughput
Replies: 3
Views: 1400

Re: CCR1036-8G-2S+ NAT maxinum throughput

It depends. First thing you should consider that 6500 doing hardware nat. Mikrotik I doing a software nat. Mikrotik limitations are as follow. 1. Maximum tcp throughput is 1gb thia is the maximum that each core can handle. 2. Latency is higher. Good stuff. The visual side is amazing compared to Cisc...
by Duduhandelman
Thu Feb 05, 2015 9:24 pm
Forum: General
Topic: Poor vlan performance on set of Mikrotik - tagged vlan's
Replies: 5
Views: 2120

Re: Poor vlan performance on set of Mikrotik - tagged vlan's

I think you should start with basic. Verify speed and duplex on all ports monitor cpu usage and look for interface errors. Next step try to isolate the the issue with iperf. Send a udp stream of 100Mb and look at the winboxes during that time so you will be able to see that 100Mb is entering the rou...
by Duduhandelman
Sun Jan 18, 2015 6:39 pm
Forum: General
Topic: CCR1036 high cpu usage by queuing and firewall
Replies: 3
Views: 1825

Re: CCR1036 high cpu usage by queuing and firewall

Maybe you should try to mark connection and after that mark the packets.

Look at the wiki for examples.
by Duduhandelman
Sat Dec 13, 2014 12:57 am
Forum: General
Topic: Product Question - Mikrotik / Routerboard CCR1036-12G-4S-EM
Replies: 3
Views: 1389

Re: Product Question - Mikrotik / Routerboard CCR1036-12G-4S

I would say you should give it a try it depends on your needs. Mikrotik qos for example is amazing compared to Cisco.
Also the visibility in Mikrotik is something you don't have using Cisco.
Enjoy
by Duduhandelman
Wed Dec 10, 2014 8:29 pm
Forum: General
Topic: how I can create delays in Mikrotik ?
Replies: 2
Views: 996

Re: how I can create delays in Mikrotik ?

I would suggest you to do this with pfsense. On the limiter you can create delay and packet loss.
by Duduhandelman
Sat Nov 22, 2014 10:38 am
Forum: General
Topic: Network diagram software?
Replies: 8
Views: 2384

Re: Network diagram software?

The best software that im using for this is The dude from Mikrotik.

It will also monitor the network as well.
Just export the map.

Enjoy.
by Duduhandelman
Wed Oct 22, 2014 3:10 pm
Forum: General
Topic: Global in/out HTB queue.
Replies: 1
Views: 546

Global in/out HTB queue.

Hi All. Maybe there is a simple way to achive the following . Im using a ccr as a core lan switch in order to have control on the connections and traffic between all of my switches. So all ports on the same bridge firewall is marking conections and packets. I would like to have the same queues on al...
by Duduhandelman
Tue Oct 21, 2014 12:10 pm
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 289
Views: 306766

Re: Tool: Realtime per IP traffic monitor for home/office

Well done, very nice tool.

It's working very well while the Mikrotik is doing routing but for some reason I'm unable to view the data while using a bridge.
The data is in the accounting on the router side.
Is there any spaecail config?

Thanks for the great tool
by Duduhandelman
Wed Sep 10, 2014 8:19 pm
Forum: General
Topic: ipsec ccr performance max 150mbit
Replies: 6
Views: 1668

Re: ipsec ccr performance max 150mbit

I think that hardware encryption is only working on aesand not 3des.

Give it a try
by Duduhandelman
Tue Aug 26, 2014 6:39 pm
Forum: General
Topic: Htb max-limit?
Replies: 1
Views: 510

Htb max-limit?

Hi All. I have a bursty traffic above the max bandwidth. Can I use a large queue and allow the traffic to be buffered? For example the total bandwidth of the circuit is 10Mb and there are fractions of a second when the application sends 50Mb. All is UDP. Can I leave max limit empty and the magic wil...
by Duduhandelman
Mon Aug 18, 2014 11:55 am
Forum: Wireless Networking
Topic: Wifi Design?
Replies: 3
Views: 887

Re: Wifi Design?

as usual buildings are with walls (even from concrete) so concrete with steel arming are killers of wifi coverage. i think 3 RB951, each on separate floors will fit to your needs for the start Thank You, Should I use the wifi as bridge to centeral router? or should each one will do nat or even rout...
by Duduhandelman
Sun Aug 17, 2014 7:40 pm
Forum: Wireless Networking
Topic: Wifi Design?
Replies: 3
Views: 887

Wifi Design?

Hi All, This is my first time designing wireless for the office. The usage is for Internet access only . Authentication will be just password and some encryption. The office size is 3 floors 600 square meters (each floor). I would like that people will move easily and stay connected. Total number of...
by Duduhandelman
Tue Jun 24, 2014 9:53 pm
Forum: General
Topic: Packet Loss on CCR
Replies: 6
Views: 1518

Re: Packet Loss on CCR

Are you seeing any errors on tge the interfaces? Maybe it's a duplex issue
by Duduhandelman
Mon Jun 23, 2014 4:28 pm
Forum: General
Topic: Packet Loss on CCR
Replies: 6
Views: 1518

Re: Packet Loss on CCR

I would suggest you to monitor the the cpu usage per core, please telnet/ssh and type /system resource monitor
Do you see any correlation between the latency to even one core using 100%?
by Duduhandelman
Sat Jun 21, 2014 9:41 pm
Forum: General
Topic: Packet Loss on CCR
Replies: 6
Views: 1518

Re: Packet Loss on CCR

What version are you using? What is the load?
by Duduhandelman
Wed Jun 18, 2014 10:20 pm
Forum: General
Topic: FCS error
Replies: 1
Views: 1348

Re: FCS error

Check speed and duplex at both ends.
If all is set the same replace the cable.
by Duduhandelman
Mon Jun 16, 2014 8:48 pm
Forum: General
Topic: Ultra robust VPN
Replies: 4
Views: 1041

Re: Ultra robust VPN

I would suggest you to consider two isp links at each site each connection connected to a different Mikrotik device (total 4 Mikrotiks) each couple will create eoip over ipsec. Now connect them both to a switch at each end and let the spanning tree do its magic. Or even better create a lagg between ...
by Duduhandelman
Fri May 30, 2014 11:43 am
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 39338

Re: The Dude is NOT Dead - New Dude Version...

Brof.
What you will be using? I was unable to find something like the lovley Dude.
I would be very happy to pay for the Dude.
by Duduhandelman
Mon Apr 28, 2014 11:42 pm
Forum: General
Topic: CCR1016-12G , Crash after 1 Week.
Replies: 1
Views: 586

Re: CCR1016-12G , Crash after 1 Week.

I have to admit the ccr series is not stable enough.
We use arround 20 devices and every month or so we have a few watchdog reboot.
Its getting better after each upgrade but its not something that you can trust unfortunately.
by Duduhandelman
Thu Apr 17, 2014 9:47 pm
Forum: General
Topic: rate-limit a VLAN
Replies: 5
Views: 1834

Re: rate-limit a VLAN

Lets give it a try.
Have you enabled the firewall on the bridge?
Have you created packet marks with the firewall?

After you will see the counters climbing in the firewall mangle create quee tree.
And it should work keep in mind that you are limiting only the outgoing interface.

Give it a try.
by Duduhandelman
Tue Apr 15, 2014 8:00 pm
Forum: General
Topic: fcs error?????
Replies: 13
Views: 46794

Re: fcs error?????

Verify speed and duplex at both ends of this interface.
It mean that the crc on the layer 2 is incorrect.

I have seen this before with mismatch duplex or faulty cable.
by Duduhandelman
Sun Apr 13, 2014 9:05 pm
Forum: General
Topic: Ccr ipsec performance?
Replies: 0
Views: 531

Ccr ipsec performance?

Hi All.
Did someone had a chance to verify the throughout of ipsec on ccr with the acceleration? I hope it can achive 1G

Thanks
by Duduhandelman
Mon Mar 24, 2014 8:50 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1016867

Re: CLOUD CORE ROUTER

My First watchdog reboot. on ROS 6.10.
by Duduhandelman
Tue Feb 18, 2014 4:15 pm
Forum: General
Topic: Logging Local+Remote
Replies: 8
Views: 1565

Re: Logging Local+Remote

Yes it's a bug. 6.6 works great.,,, I will email support.
by Duduhandelman
Tue Feb 18, 2014 3:47 pm
Forum: General
Topic: Logging Local+Remote
Replies: 8
Views: 1565

Re: Logging Local+Remote

Not working on 6.9 and 6.10.
Will try 6.6 shortly.
by Duduhandelman
Tue Feb 18, 2014 1:47 pm
Forum: General
Topic: Logging Local+Remote
Replies: 8
Views: 1565

Re: Logging Local+Remote

Thanks jaykay2342.

For example if you login with Winbox with wrong password you get the message localy and remotely?
For me its working or local or remote not both.

Thanks
by Duduhandelman
Tue Feb 18, 2014 10:52 am
Forum: General
Topic: Logging Local+Remote
Replies: 8
Views: 1565

Re: Logging Local+Remote

Thank You,
The problem is that only one action is working.
For example I would like to send info to local memory and remote syslog,

Thanks
by Duduhandelman
Tue Feb 18, 2014 10:34 am
Forum: General
Topic: Logging Local+Remote
Replies: 8
Views: 1565

Logging Local+Remote

Hi All,
Do you think it's possible to send log remotely and locally for events?
I can create only one action.

Thanks.
by Duduhandelman
Tue Jan 28, 2014 1:21 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1016867

Re: CLOUD CORE ROUTER

For the first time, i got problems using CCR. This is my first CCR, not using sfp, so it might be related to my problem. I changed a RB1000 to a CCR. The purpus of the router, is to make VPLS tunnels from a IC With another ISP. Setup is easy : ether1 -Cisco(l2 link in to site) ether2 - misc mikroti...
by Duduhandelman
Tue Jan 07, 2014 9:43 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1016867

Re: CLOUD CORE ROUTER

It looks scarry at first while the router is not booting. Here is the formal answer..... This is expected, as the unit receives information via console, and perceives this as the "press any key" message at startup, and then enters RouterBOOT menu. To change this, enter RouterBOOT setup, and change t...
by Duduhandelman
Fri Jan 03, 2014 11:51 am
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 23196

Re: What's new in 6.8rc1

Does anyone tested ipsec on ccr now? I wonder if it will take 1G.
by Duduhandelman
Tue Dec 17, 2013 8:58 am
Forum: General
Topic: CRS Routing?
Replies: 5
Views: 1599

Re: CRS Routing?

Thanks. There is something strange in the title of the product a layer 3 switch. From wikipedia The only difference between a layer 3 switch and router is the way the administrator creates the physical implementation. Also, traditional routers use microprocessors to make forwarding decisions, and th...
by Duduhandelman
Mon Dec 16, 2013 9:23 pm
Forum: General
Topic: CRS Routing?
Replies: 5
Views: 1599

Re: CRS Routing?

True this is the default configuration.
But this routing is done by software.
I was under the impression that basic routing will be done by hardware.
by Duduhandelman
Mon Dec 16, 2013 5:50 pm
Forum: General
Topic: CRS Routing?
Replies: 5
Views: 1599

CRS Routing?

HI All, Just got my first CRS. it looks very promising, the LCD is a nice thing to have on a switch instead of a name label and IP also the port infor is great. And it is silent as well:D One thing I'm not sure is where is the layer 3 switching? should I configure IP the normal way, once I do that I...
by Duduhandelman
Fri Oct 25, 2013 10:49 pm
Forum: General
Topic: MikroTik News October 2013 (Issue #52)
Replies: 27
Views: 11825

Re: MikroTik News October 2013 (Issue #52)

The enterprise market is waiting for a layer 2 10G switch 48 port in the price range of sub 2K$. It should have minimal options like igmp snooping and QOS.
I think its a great time for mikrotik to get into the enterprise market.

Good luck.
by Duduhandelman
Fri Oct 25, 2013 1:07 pm
Forum: General
Topic: MikroTik News October 2013 (Issue #52)
Replies: 27
Views: 11825

Re: MikroTik News October 2013 (Issue #52)

Thank you....
by Duduhandelman
Fri Oct 25, 2013 12:20 pm
Forum: General
Topic: MikroTik News October 2013 (Issue #52)
Replies: 27
Views: 11825

Re: MikroTik News October 2013 (Issue #52)

Looks very interesting, where we can see the new switch options?
Is there a manual or a wiki page for that.
by Duduhandelman
Thu Oct 24, 2013 9:19 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1016867

Re: CLOUD CORE ROUTER

Hi All.
I have CCR with 6.1 that had rebooted by watchdog.
What version should I upgrade? Flapping port 6.5


Thanks.
by Duduhandelman
Sun Sep 29, 2013 10:13 pm
Forum: The Dude
Topic: Kickstarter for The Dude
Replies: 7
Views: 2714

Re: Kickstarter for The Dude

I would be very happy if Mikrotik will hear the users. Mikrotik has great peace of software that currently wasted. I'm asking myself why say no for the money? Also I tried to ask Mikrotik a few changes that I'm willing to pay for in RouterOS and the Dude. Guess what. the answer was no. I wish I had ...
by Duduhandelman
Wed Jan 30, 2013 5:11 pm
Forum: General
Topic: Bridge Firewall
Replies: 1
Views: 470

Bridge Firewall

Hi All, I'm trying to configure a layer 2 firewall on RB1100. While everything is working well beside that I have to open rules both way in order to accomplish connection. For example. Port 1 connected to a pc 192.168.0.1 Port 2 connected to a pc 192.168.0.2 Port 1 and 2 are bridge1 In order to ping...
by Duduhandelman
Tue Dec 11, 2012 12:00 pm
Forum: Beginner Basics
Topic: Bridge firewall by eth
Replies: 1
Views: 1486

Bridge firewall by eth

Hi All. I would like to isolate group of servers inside a LAN without changing ip address or using a vlans. All should be done by a layer 2 filtering. I would like to create a bridge of 5 interfaces. The security model should be as follow. 1. All interfaces should have access to servers on on eth1. ...
by Duduhandelman
Sun Aug 26, 2012 10:11 pm
Forum: General
Topic: What is the best RouterOS Host for High Bandwidth VPN?
Replies: 2
Views: 574

Re: What is the best RouterOS Host for High Bandwidth VPN?

I would suggest you to use a cheap server like dell R210 for your core.
The RB1100x2 is working very well at maximum of 300MB depends on your traffic type and number of sessions.
If you will use RB1100x2 follow the IPSec manual it's very important to get good performance.
Good luck.
by Duduhandelman
Wed Jul 11, 2012 9:58 pm
Forum: The Dude
Topic: Display CDP
Replies: 2
Views: 1178

Re: Display CDP

Thanks Lebowski,
I appreciate your help, I will continue to play with it.

Many Thanks
by Duduhandelman
Wed Jul 11, 2012 3:38 pm
Forum: The Dude
Topic: Display CDP
Replies: 2
Views: 1178

Display CDP

Hi All,
I would like to print the CDP neighbors list on a device label.
While running snmpwalk I can see the data but it's spreads over a few OID's.
Does anyone has an idea on how to accomplish that?

Many Thanks.
by Duduhandelman
Mon Jul 02, 2012 1:46 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 47139

Re: Vote for new DUDE features!

Hi All, I would suggest to add a compression option on the connection option. During the test I have noticed that monitoring 200 servers uses around 1Mbits between Dude and the Agent. While doing the same test over SSH tunnel with compression the traffic use less than 200Kbps. I think its very easy ...
by Duduhandelman
Fri Jun 22, 2012 10:15 pm
Forum: General
Topic: Ipsec RB-1100X2AH
Replies: 3
Views: 1177

Re: Ipsec RB-1100X2AH

Hi All, After a lot of tests and help from Mikrotik support (Thanks). I found that the most important part is to configure the CPU affinity on the RouterBoard. Without that the performance is poor. Also there is one open issue while using tcp iperf or Mikrotik bandwidth application from a pc to pc w...
by Duduhandelman
Fri Jun 15, 2012 2:10 pm
Forum: General
Topic: Ipsec RB-1100X2AH
Replies: 3
Views: 1177

Re: Ipsec RB-1100X2AH

Thank you..
Will configure according and update next week.
Thanks again.
by Duduhandelman
Wed Jun 13, 2012 10:25 am
Forum: General
Topic: Ipsec RB-1100X2AH
Replies: 3
Views: 1177

Ipsec RB-1100X2AH

Hi All, Maybe someone has faced this issue before. I have 2X RB-1100X2AH ver 5.14 and another two X86 running 5.14 as well. Each pair connected with IPSEC and Eoip which creates two different L2 links over LACP. The two pairs connected using a single GigE connection. This gives me a load balancing a...
by Duduhandelman
Thu Jun 07, 2012 11:05 am
Forum: Beginner Basics
Topic: Switch basics?
Replies: 6
Views: 1734

Re: Switch basics?

Thank you.
Can you please provide an example of a real usage?
Many thanks
by Duduhandelman
Thu Jun 07, 2012 10:53 am
Forum: Beginner Basics
Topic: Switch basics?
Replies: 6
Views: 1734

Re: Switch basics?

Thank you.
What is the actually usage for copying or redirecting to the CPU?
Thanks again.
by Duduhandelman
Tue Jun 05, 2012 5:47 pm
Forum: Beginner Basics
Topic: Switch basics?
Replies: 6
Views: 1734

Switch basics?

Hi All, I'm using a few Mikrotik routers all is working great. There are a few things that I'm not sure regarding the switch. 1. What can I do with switch rules? Copy to CPU or redirect to CPU 2. Master port it's a must? I can use the port even when it's a master port 3. Is there any way to sniff da...
by Duduhandelman
Sun Apr 15, 2012 9:38 pm
Forum: The Dude
Topic: Dude for Linux
Replies: 49
Views: 36626

Re: Dude for Linux

Looking for dude agent on Linux? I'm using Dude 4 beta 3 using openvz vm running under wine. It does not run as a service but it's start automatically. Working very very well. My main server and dozen agents running like that. It's very easy to deploy just backup and restore the openvz part This ope...
by Duduhandelman
Thu Mar 15, 2012 9:59 am
Forum: The Dude
Topic: If syntax Interface.InBitRate
Replies: 1
Views: 1096

If syntax Interface.InBitRate

Hi All, Sometimes I would like to add a condition to a Link label. I would like to write a text in the label when the Interface.InBitRate = 0. The reason for that is that when having an Ethernet circuit that cross other equipment in the way. it will not show as down if the circuit is connect to the ...
by Duduhandelman
Fri Mar 09, 2012 4:34 pm
Forum: The Dude
Topic: Dude 4.0 beta4??
Replies: 39
Views: 24588

Re: Dude 4.0 beta4??

When looking on the map list double click on a map opens the map setting and the map itself.
I assume it should only open the map.
by Duduhandelman
Wed Mar 07, 2012 4:29 pm
Forum: The Dude
Topic: Ping Timeout (Database related)
Replies: 5
Views: 3157

Re: Ping Timeout (Database related)

This is very problematic.
I have no idea what is the cause, Since Ive restored the db all is up but with less 300 devices
I'm not adding devices..
This issue is critical.
I hope we will find it fast..
Many thanks
by Duduhandelman
Mon Mar 05, 2012 9:17 pm
Forum: The Dude
Topic: Dude 4.0 beta4??
Replies: 39
Views: 24588

Re: Dude 4.0 beta4??

Thanks you for that. I would Be happy to see the following. 1. Adding and removing probes from a few devices at once. 2. I think that the database should be readable somehow for example my dude started to show pings probes as down but the pings graphs are alive on 400 devices from 1000+ I have no id...
by Duduhandelman
Thu Mar 01, 2012 12:46 pm
Forum: General
Topic: Vpls over IPSEC
Replies: 6
Views: 1861

Re: Vpls over IPSEC

Thank You, Very strange things. While using EOIP testing with iperf tcp test. once Im able to get 300Mb and the second time 100Mb, its happening each time. once 300 once 100 once 300 once 100. Also while copying file over ssh I'm not able to cross 6MB per second. Any Idea? Update I have made some ip...
by Duduhandelman
Thu Mar 01, 2012 10:39 am
Forum: General
Topic: Vpls over IPSEC
Replies: 6
Views: 1861

Re: Vpls over IPSEC

Thank you.
I will give it a try, sorry for asking but I would like to achieve the max performance.
What will be the fastest encryption algorithem?
I appriciate the help.

Thank you.
by Duduhandelman
Wed Feb 29, 2012 5:20 pm
Forum: General
Topic: Vpls over IPSEC
Replies: 6
Views: 1861

Re: Vpls over IPSEC

Thank You,
Can you please recommend what will be the best performance throughput setup in order to create layer 2 vpn?
How can I make sure I'm using the hardware encryption?

Many Thanks
by Duduhandelman
Wed Feb 29, 2012 3:48 pm
Forum: General
Topic: Vpls over IPSEC
Replies: 6
Views: 1861

Vpls over IPSEC

Hi All, I have two RB 1100X2 and I would like to create Layer 2 VPN. While trying to do that with EOIP over IPSEC it looks like its working I can reach 400Mb. While trying to do the same using VPLS I can get to 800+mb but I noticed that the traffic is not encrypted.( While Sniffing the WAN port). Is...
by Duduhandelman
Mon Feb 27, 2012 10:43 am
Forum: The Dude
Topic: Ping Timeout (Database related)
Replies: 5
Views: 3157

Ping Timeout (Database related)

Hi All, :shock: After running a Dude for a few weeks with 1000+ devices. Something very strange happened about 800 devices are down/partially down because ping probe timeout. The servers uses 10 agents all running on WINE. The ping graphs are working correctly. In trying to solve it backup and resto...
by Duduhandelman
Thu Feb 02, 2012 8:56 pm
Forum: The Dude
Topic: Wan Links monitor
Replies: 0
Views: 819

Wan Links monitor

Hi All, I was wondering maybe you have some experience on how to monitor wan links. (Up or Down) The links I need to monitor are layer 2. The problem is that usually the physical interface will stay up and the link will be down at the carrier network so both ends of link will be up. The best visual ...
by Duduhandelman
Mon Jan 30, 2012 2:55 pm
Forum: The Dude
Topic: High Latency probe shows available when device is down
Replies: 9
Views: 4897

Re: High Latency probe shows available when device is down

Hi All, The latency probe is working well. For some reason I'm unable to use this probe using a remote agent, the ping is made from the local Dude server and not the agent. Maybe someone has an idea on how to accomplish the following: Adding a latency number to a link (Maybe even color it on high va...
by Duduhandelman
Thu Jan 26, 2012 8:49 pm
Forum: The Dude
Topic: Text function create a tool
Replies: 8
Views: 2107

Re: Text function create a tool

Thank You all,
I made a short Python script and all is working perfect.

Thanks Again.
by Duduhandelman
Wed Jan 25, 2012 11:14 pm
Forum: The Dude
Topic: Text function create a tool
Replies: 8
Views: 2107

Re: Text function create a tool

Thanks,
Yeh this will work, Now I should find a way to update 200 Devices.
I was unable to find a way to edit the database directly.

Many Thanks
by Duduhandelman
Wed Jan 25, 2012 10:24 pm
Forum: The Dude
Topic: Text function create a tool
Replies: 8
Views: 2107

Re: Text function create a tool

Thanks fbsdmon
That's exactly what I was looking for. I was able to add it in the device appearance and it working perfect.
One last thing is how do I add this to the tool?
What should be the tool syntax
Thanks Again.
by Duduhandelman
Wed Jan 25, 2012 9:46 pm
Forum: The Dude
Topic: Text function create a tool
Replies: 8
Views: 2107

Text function create a tool

Hi All, Maybe you have an idea on how to accomplish that. I have servers that the ip address of them is 1.140.X.X while the IPMI ip of those servers is 192.140.X.X. I wonder if its possible to create a tool that will open https://192.140.X.X without configuring this IP on each server. If I understan...
by Duduhandelman
Wed Jan 25, 2012 8:30 pm
Forum: The Dude
Topic: Appeareance execute function.
Replies: 3
Views: 1235

Re: Appeareance execute function.

Thank you.
I found the problem it's a bug in version 4 beta3.
In 3.5 it's working.
The strange part that it's working after upgrade as well.
So all I needed to do is install 3.5 and upgrade to 4.

Many thanks
by Duduhandelman
Tue Jan 24, 2012 9:12 pm
Forum: The Dude
Topic: Appeareance execute function.
Replies: 3
Views: 1235

Re: Appeareance execute function.

UPDATE!
On other system its working as it should be.
Both machines running the same OS.
I will update if I will find something.
by Duduhandelman
Tue Jan 24, 2012 5:55 pm
Forum: The Dude
Topic: Appeareance execute function.
Replies: 3
Views: 1235

Appeareance execute function.

Hi All, I'm currently using dude 4 beta 3 and it's rocks :D . After spending a few hours trying o display batch file output value under the device appearance I decided to write this post. Does anyone able to succeed in displaying execute function of any exe/batch file under device appreance? I'm all...
by Duduhandelman
Thu Jan 12, 2012 2:05 pm
Forum: The Dude
Topic: Appearance Functions
Replies: 1
Views: 2562

Appearance Functions

Hi All, I'm adding a latency function to the appearance of a server. Ping time= [array_element(ping(device_property("FirstAddress")),0] The problem is that this is done from the local dude server and not from the agent. So I see two options here. 1. Use the ping probe value and display it on the app...