Community discussions

MUM Europe 2020

Search found 14 matches

by lordiceman
Tue Feb 07, 2012 12:01 am
Forum: General
Topic: problem with Broadcast
Replies: 4
Views: 676

Re: problem with Broadcast

if some have better signal at one frequency and others at other, you have to split your cliets into more antenas and use frequency which is better for them... you can have different frequency usage at different physical places, thats just normal, some other provider may have network in your frequenc...
by lordiceman
Mon Feb 06, 2012 12:34 pm
Forum: General
Topic: problem with Broadcast
Replies: 4
Views: 676

Re: problem with Broadcast

you have 40 clients connecting to one antena? usualy i have problem with latency or throughtput if i let more than 6 clients on single antena
by lordiceman
Mon Jan 09, 2012 5:49 pm
Forum: RouterBOARD hardware
Topic: RB 133 LOSE LICENSE
Replies: 4
Views: 1782

Re: RB 133 LOSE LICENSE

solution to your problem is here in this thread http://forum.mikrotik.com/viewtopic.php?f=2&t=58049
by lordiceman
Sat Jan 07, 2012 10:24 pm
Forum: General
Topic: Routing between two subnets
Replies: 11
Views: 22680

Re: Routing between two subnets

you can do export of total config, but it exports also stuff that is set by default, it will be alot of lines :P, try
/export file=config
then you will find config.rsc in /files, you can download it with ftp or drag&drop from winbox
by lordiceman
Sat Jan 07, 2012 1:56 am
Forum: General
Topic: Routing between two subnets
Replies: 11
Views: 22680

Re: Routing between two subnets

is there anything else you configured on router? maybe you should try to reset configuration and set only ip+routes and try it out, if it works, set the rest
by lordiceman
Fri Jan 06, 2012 10:30 pm
Forum: General
Topic: Upload Isp Problem
Replies: 1
Views: 517

Re: Upload Isp Problem

you will use 2 public ip, one for download from one isp and the other one for upload from second isp, this won't work, basics of ip networking, when computer sends packet to destination ip, it expects to get reply from same ip (same port) otherwise it can not decide that that packet is for same conn...
by lordiceman
Fri Jan 06, 2012 9:29 pm
Forum: General
Topic: Routing between two subnets
Replies: 11
Views: 22680

Re: Routing between two subnets

what you need is static route for your ISP1 dsl router for subnet 2 (192.168.128.0/24) with gateway 192.168.0.254

otherwise ISP1 dsl router don't know return path for your subnet 2
by lordiceman
Fri Jan 06, 2012 9:02 pm
Forum: Wireless Networking
Topic: tx rates
Replies: 10
Views: 2031

Re: tx rates

I had and still have in a box on my bench many NL-2511MP PLUS card which use the prism. They worked great in my ap's and cpe with 3.30 ros but did not work with any higher ros like 4.17. I asked Mikrotik and they said prism is not supported and go back to 3.30. so I have most of my network running ...
by lordiceman
Fri Jan 06, 2012 4:07 pm
Forum: Wireless Networking
Topic: tx rates
Replies: 10
Views: 2031

Re: tx rates

ap: name="wlan2" mtu=1500 mac-address=xxxxxxxxxx arp=enabled disable-running-check=no interface-type=Prism prism-cardtype=200mW radio-name="xxxxxx" mode=ap-bridge ssid="xxxxxx" area="" frequency-mode=manual-txpower country=slovak republic antenna-gain=0 frequency=2452 band=2ghz-b channel-width=20mhz...
by lordiceman
Thu Jan 05, 2012 5:31 pm
Forum: Wireless Networking
Topic: tx rates
Replies: 10
Views: 2031

Re: tx rates

i tried ping flooding and client still stayed at 2mbit/11mbit (tx/rx), i even tried to download something bigger at client side but still only 2mbits today i was at the site where i have 2 mikrotiks with same minipci but different antenas and tried to connect from 2m distance with notebook, i could ...
by lordiceman
Thu Jan 05, 2012 5:23 pm
Forum: General
Topic: LOST LICENSE AFTER UPGRADE
Replies: 7
Views: 4552

Re: LOST LICENSE AFTER UPGRADE

Thanks lordiceman, I alerady have an account but I cant find any "request key" on my account page. I can only find "request key from another account" at the bottom left corner of my account page. Those are the same thing yup, just go there and enter your software id or the key file and btw i lost m...
by lordiceman
Wed Jan 04, 2012 11:09 pm
Forum: General
Topic: LOST LICENSE AFTER UPGRADE
Replies: 7
Views: 4552

Re: LOST LICENSE AFTER UPGRADE

when i lost my licence, this is what i did: Sign up for mikrotik.com, after registration you will receive by e-mail password to login. Click (top left in the Account) - Select - Request key - Import key from MK - System - License - Import key If all goes OK, go back to Account - Click on - work with...
by lordiceman
Wed Jan 04, 2012 10:38 pm
Forum: Wireless Networking
Topic: tx rates
Replies: 10
Views: 2031

Re: tx rates

when i check connection rates on mikrotik ap, it states 2mbit/11mbit (tx/rx) for all of clients, but signal strength is under -60 so i don't see why its only 2 mbits. Because they are connected only with 2mbits their internet went bad too, its not reaching 2mbit just something around 1.75mbit and at...
by lordiceman
Wed Jan 04, 2012 7:47 pm
Forum: Wireless Networking
Topic: tx rates
Replies: 10
Views: 2031

tx rates

after i updated to 5.11 from 2.9.98 i started to notice that all clients are connecting to my prism 2.5 (2.4 ghz 200mW) minipci only with 2mbits but rx is usualy 11mbit ccq is 100% signal strength is under -60 i'm pretty sure they used to connect at higher speeds, did i missed something? are there s...