Community discussions

MikroTik App

Search found 75 matches

by Roy
Mon May 26, 2014 2:15 pm
Forum: General
Topic: Looking for NMS Program
Replies: 1
Views: 973

Looking for NMS Program

Hello,
I'm looking for NMS Program provider.

Basic require
- MAP(Image or internet map)
- Logo changable
- Text changable(to other language not english, I can translate)
- SNMP 2/3
- Ping
- and other solution you can do

If you want provide to me, please answer below.
by Roy
Mon Apr 07, 2014 7:19 am
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75351

Re: CAPs Manager

Where is "interworking" menu?

is it has 802.11u, hotspot2.0 setup menu?

or not ready? or no need to exist?
by Roy
Thu Apr 03, 2014 4:44 pm
Forum: Wireless Networking
Topic: Mikrotik Wireless Controller
Replies: 54
Views: 22126

Re: Mikrotik Wireless Controller

is there anybody who can introduce controller(hotspot2.0) which compatible with router os and RB411?

Please!!!!!!!!!!!!
by Roy
Mon Oct 14, 2013 7:10 am
Forum: General
Topic: ROS v. 6.3 problem
Replies: 4
Views: 2295

Re: ROS v. 6.3 problem

Roy, that is the RouterOS "Identity" name, which is part of the configuration. If you want to change this, you must also upload the file "identity.auto.rsc" with the contents: /system identity set name="yourbrand" Hello Nomis, how to make "identity.auto.rsc" ...
by Roy
Thu Sep 05, 2013 4:16 am
Forum: General
Topic: ROS v. 6.3 problem
Replies: 4
Views: 2295

ROS v. 6.3 problem

Current ROS 6.3 problem.
1. Explore browser cannot login.
2. Telnet window shows “Mikrotik” Name (I use ‘brand maker’ wish to remove)
3. http://192.168.88.1/graphs/ is not showing Graph.
by Roy
Wed Aug 21, 2013 11:24 am
Forum: General
Topic: LED setup, signal strength
Replies: 2
Views: 1551

Re: LED setup, signal strength

Use this command to configure LEDs for signal strength:
/system led add disabled=no interface=wlan1 leds=led1,led2,led3,led4,led5 type=wireless-signal-strength
it is only work in station mode.

I wish it work at AP mode also.
by Roy
Wed Aug 21, 2013 11:21 am
Forum: General
Topic: LED Light PIPE
Replies: 2
Views: 1119

LED Light PIPE

I'm looking for LED Light PIPE for RB411GL to extend LED light to out of waterproof enclosure.
I wish 5LED to use as signal strength.

Anybody who have information of provider, let me know.
by Roy
Wed Aug 21, 2013 11:08 am
Forum: Wireless Networking
Topic: Signal LED for alignment.
Replies: 18
Views: 4859

Re: Signal LED for alignment.

coming back to the LED issue can we have some form of LED extension?? please :) anyone on this forum knows how to extend the LED's from the board??
Hello
did you find LED LIGHT PIPE?

I also looking for LED PIPE for RB411GL.

Let me know where did you find.
by Roy
Mon Aug 12, 2013 6:14 am
Forum: General
Topic: LED setup, signal strength
Replies: 2
Views: 1551

LED setup, signal strength

I’m using 411GL.
There have 5LED, I wish to use to indicate signal strength.

For example,
4 LED lighted: signal is strong
3 LED lighted: signal is good
2 LED lighted: signal is normal
1 LED lighted: signal is bad.

I tried many time, but I couldn’t do.
How set signal strength parameter ?
by Roy
Thu Aug 01, 2013 9:19 am
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 2078

Re: Connection List question(RB435G)

NOTE: If the car is moving fast, you need to have 2 antennas in client, connected to 2 different APs. I don't know how to make it! Scripts for do the other stuff: -Kick when less than 4000 P-throughput /system script add name=chequear-throughput policy=\ ftp,reboot,read,write,policy,test,winbox,sni...
by Roy
Wed Jul 31, 2013 6:46 pm
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 2078

Re: Connection List question(RB435G)

Hi, this is not for that. This limit is to avoid connections grom -X to -x dbm.. BUT if you are connected and your signal drops, you wont be kicked out. This parameter is only read when you try to connect. (Road Side Equipment)---------------(RSE)--------------------(RSE) CAR moving===========> thi...
by Roy
Tue Jul 30, 2013 2:05 pm
Forum: General
Topic: VPN(PPTP) setup problem
Replies: 1
Views: 726

VPN(PPTP) setup problem

Hello I have problem to setup VPN of RB435G Computer(A)—RB435G(AP_VPN CLIENT)---------------(Wireless)---------------RB435G(Station_VPN SERVER)—Computer(B) Computer(C) can access to RB435G(AP) and can open Computer(A)’s share folder and receive file. In my knowledge, Computer(C) can ping to computer...
by Roy
Tue Jul 30, 2013 2:01 pm
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 2078

Connection List question(RB435G)

I have problem to set "connection List" Signal Strength Limit setup. For example, RB435G is not connected Antenna. And Two RB435G wireless connection is good to ping reply(indoor test). Received signal is -75dBm. I set signal strength -90..-60 dBm in connect list and press ‘apply’ button, ...
by Roy
Wed Apr 03, 2013 2:17 pm
Forum: Wireless Networking
Topic: Pseudobridge setup
Replies: 1
Views: 957

Pseudobridge setup

Hello, I have common AP. With RB435G+R52hn, I want to connect to AP. Question, Only pseudobridge/pseudobridge clone can connect to AP? I want to use "Station" mode. Please help. Another question,, If AP can set as "Bridge" and can input other wireless device's MAC Address,, How c...
by Roy
Mon Jan 28, 2013 7:57 pm
Forum: Wireless Networking
Topic: Mikrotik with other device mesh network
Replies: 0
Views: 744

Mikrotik with other device mesh network

Hi, I'm using RB435G. I'm install new RB435G 6 unit in the street with mesh network. But currently, lagacy network device is installed. So I want to add these lagacy device into my mesh network. Lagacy is not Mikrotik, it is just AP-CPE connection. is it possible mesh network? Please refer to attach...
by Roy
Fri Dec 28, 2012 5:01 pm
Forum: General
Topic: two minipci express slot board
Replies: 5
Views: 1945

two minipci express slot board

Anybody let me know board like below

- mini PCI express slot X 2 for 3X3 MIMO
- Gigabit Ethernet Port X 2


Thank you
by Roy
Wed Nov 07, 2012 8:57 am
Forum: General
Topic: LED extension
Replies: 0
Views: 559

LED extension

I'm planning new product line with RB435G.

RB435G have 5 LED.
Is there any solution, LED extension to enclosure?
It seems there is no pin header for LED out.
any solution?
by Roy
Thu Sep 20, 2012 11:42 am
Forum: Wireless Networking
Topic: Directional Antenna Alginment with Spectrum analyser
Replies: 7
Views: 2217

Re: Directional Antenna Alginment with Spectrum analyser

Hi, yes this is good antenna alignment solution but you need activate wireless card transmit single carrier because with modulated signal you can't do right alignment.
Hi,
Let me know how set single carrier?
I'm using RB433GL

thank you
by Roy
Thu Sep 20, 2012 6:30 am
Forum: Wireless Networking
Topic: Modulation, non-modulation(Single carrier) for spectrum test
Replies: 1
Views: 1194

Modulation, non-modulation(Single carrier) for spectrum test

Hi all, I'd like to do spectrum test for certification with RB433GL. "Single carrier wave(non-modulation) Continuous output status signals" (it is continuous Tx with not load data at carrier frequency) "Modulation continuous output status signal" How can I test? Uldis uploaded so...
by Roy
Mon Jul 09, 2012 2:08 pm
Forum: Wireless Networking
Topic: AES Encryption
Replies: 3
Views: 3227

Re: AES Encryption

Yes it does, link to Wireless manual: http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#WPA_properties your link address say as below. Statically configured WEP keys Different algorithms require different length of keys: 40bit-wep - 10 hexadecimal digits (40 bits). If key is longer, only firs...
by Roy
Fri Jul 06, 2012 5:40 am
Forum: General
Topic: v5.18 released
Replies: 92
Views: 34801

Re: v5.18 released

WDS does not support 802.11n?
What's mikrotik's plan?


I test with 7ea(6 hopping) RB800 with Static Mesh
Result is 26Mbps.

When I test with AP-Station,,, up to 100Mbps.

Wish to up to 100Mbps at Static Mesh
by Roy
Wed Jul 04, 2012 3:24 pm
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Re: Mesh handover network with no latency time or no packet

In all my experience, if you have a fast-moving target that will be switching constantly, then stock ospf if probably not the best choice, as the 10s hello timer means upwards of 30 seconds for some failover. You are able to turn the hello's down to 1s each, which would need to be done on all radio...
by Roy
Wed Jul 04, 2012 10:13 am
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Re: Mesh handover network with no latency time or no packet

I dont advise mesh networks nor bridged networks,rather use a routed network and implement OSPF.As far as latency goes you can work on 1-2ms per link
can you give me example for me?
by Roy
Wed Jul 04, 2012 9:07 am
Forum: General
Topic: RB800 Factory Default
Replies: 3
Views: 2188

Re: RB800 Factory Default

http://wiki.mikrotik.com/wiki/Manual:Co ... Management
Command name: /system reset-configuration
If I cannot access to RB800 with winbox, how can I do?
Setting is mixed, so I cannot access to IP address.

Can I use Reset Button? how?
Or can I use Serial port to input command?
by Roy
Wed Jul 04, 2012 8:44 am
Forum: General
Topic: RB800 Factory Default
Replies: 3
Views: 2188

RB800 Factory Default

How to set RB800 Factory Default?
by Roy
Mon Jul 02, 2012 1:25 pm
Forum: Wireless Networking
Topic: RB800 3X3 minipci card
Replies: 46
Views: 18194

Re: RB800 3X3 minipci card

We are on a pre-launch program with them, but still waiting for the units – will get them next week I hope. Will test for a week , and then move it into production if ok - our SOP (standard operation procedure). I’ll post results for our standard 10 km test-link.

/Tb
Hi Tbird,
Any result?
by Roy
Sun Jul 01, 2012 1:41 pm
Forum: Wireless Networking
Topic: Wireless interface disable when Ethernet link is disconnect
Replies: 1
Views: 853

Wireless interface disable when Ethernet link is disconnect

MT OS support Wireless interface disable function when ethernet link is disconnected?

When Ethernet link is disconnected, I'd like to disable wireless interface.
by Roy
Sun Jun 24, 2012 5:31 pm
Forum: Wireless Networking
Topic: RB800 3X3 minipci card
Replies: 46
Views: 18194

Re: RB800 3X3 minipci card

Does RouterOS support AR9580/AR9590 chipset???
I also have same question.
by Roy
Fri Jun 22, 2012 1:46 pm
Forum: Wireless Networking
Topic: RB411UAHR 0.0.0.0 IP address
Replies: 4
Views: 2627

Re: RB411UAHR 0.0.0.0 IP address

Before your answer, I tried factory default with reset button.

now winbox cannot find anything..........
by Roy
Fri Jun 22, 2012 1:32 pm
Forum: Wireless Networking
Topic: RB411UAHR 0.0.0.0 IP address
Replies: 4
Views: 2627

RB411UAHR 0.0.0.0 IP address

I purchased RB411UAHR.
But I could't access with winbox. because like below picture
411.jpg
Please let me know how can I solve this problem.
by Roy
Fri Jun 22, 2012 10:32 am
Forum: Wireless Networking
Topic: RB800 3X3 minipci card
Replies: 46
Views: 18194

Re: RB800 3X3 minipci card

3X3 minipci card is not available?
Can I ask why not available?
Router OS is not compatible with 3X3 minipci card? or RB800 is not compatible with RB800?

http://forum.mikrotik.com/viewtopic.php?f=2&t=60599
I was recommanded 3X3 minipci card from Nomis.
by Roy
Thu Jun 21, 2012 4:56 pm
Forum: Wireless Networking
Topic: RB800 3X3 minipci card
Replies: 46
Views: 18194

Re: RB800 3X3 minipci card

I wish to know Mini pci module not mini pciE.
by Roy
Wed Jun 20, 2012 9:51 am
Forum: Wireless Networking
Topic: AES Encryption
Replies: 3
Views: 3227

AES Encryption

Router OS support AES 128/256bit encryption?
by Roy
Wed Jun 20, 2012 4:03 am
Forum: Wireless Networking
Topic: RB800 3X3 minipci card
Replies: 46
Views: 18194

RB800 3X3 minipci card

Please recommand 3x3 minipci card most suitable to RB800.
by Roy
Thu Jun 14, 2012 11:11 am
Forum: Wireless Networking
Topic: RB800 Hardware Version
Replies: 1
Views: 767

RB800 Hardware Version

Please inform me RB800 Hardware version history.
by Roy
Thu Jun 14, 2012 9:27 am
Forum: RouterBOARD hardware
Topic: Request Recommandation of X86 board
Replies: 5
Views: 2055

Re: Request Recommandation of X86 board

Hi Dubby, If 3X3 minipci card X 4 unit at one RB800.... I worry two things. 1. High CPU Load may cause of low throughput 2. 3X3 X 4unit may cause RF interference and it occur low throughput. http://forum.mikrotik.com/viewtopic.php?f=7&t=62823 Hi Roy, The RB800 was pointing exactly what your were...
by Roy
Thu Jun 14, 2012 8:29 am
Forum: Wireless Networking
Topic: RB800 3X3 X 4
Replies: 2
Views: 1726

RB800 3X3 X 4

Hi Nomis Question1 below your link data is only installed one 3X3 minipci card at RB800. But CPU Load is 51% during Speed test. If install 4 minipci card(3X3), CPU load will be very high. then I think throughput will be quite low. I worry two things 1. High CPU Load may cause of low throughput 2. 3X...
by Roy
Wed Jun 13, 2012 2:57 am
Forum: Wireless Networking
Topic: SXT series
Replies: 1
Views: 1075

SXT series

Compare with STX series, RB711GA-5hnd is same performance?
And if not concern RF part, RB411GL is same performance with STX series?
by Roy
Fri Jun 08, 2012 1:25 pm
Forum: Wireless Networking
Topic: Continuous Tx Spectrum Test for Certificaiton
Replies: 4
Views: 1666

Re: Continuous Tx Spectrum Test for Certificaiton

I want to test Continuous Tx. Wanted result is clear pattern of Spectrum analyser.

Other manufacturer provide me "RF test firmare" and ART program for this test.
by Roy
Fri Jun 08, 2012 10:07 am
Forum: Wireless Networking
Topic: Continuous Tx Spectrum Test for Certificaiton
Replies: 4
Views: 1666

Continuous Tx Spectrum Test for Certificaiton

https://www.youtube.com/watch?v=7GCJYASMCFI&feature=youtube_gdata_player I'm testing Continuous Tx test for Certification. For spectrum test, I set mode as "alignment only" Please refer to attached youtube video. Spectrum result is not clear pattern. I used RB433GL + WLM200N5-23(compex...
by Roy
Wed Jun 06, 2012 11:20 am
Forum: RouterBOARD hardware
Topic: Request Recommandation of X86 board
Replies: 5
Views: 2055

Re: Request Recommandation of X86 board

I need 200Mbps or more throughput.
4 Mini PCI slot 3X3 mimo.
Low reduce of performance in MESH topology.

Do you think RB800 is suitable?
If RB800 install one 3X3 mimo and four 3X3 mimo,
Throughput might be reduced?
by Roy
Fri Jun 01, 2012 2:40 pm
Forum: RouterBOARD hardware
Topic: Request Recommandation of X86 board
Replies: 5
Views: 2055

Request Recommandation of X86 board

Please recommand high performance board which support
- Support Router OS
- 4 MINI PCI Slot
- Enough Memory
- Gigabit Ethernet more then 2 port.
- PoE
by Roy
Wed Apr 25, 2012 11:15 am
Forum: Wireless Networking
Topic: RB board is compatible with 900MHz RF Card?
Replies: 7
Views: 1820

RB board is compatible with 900MHz RF Card?

When I installed GZ-901 to RB433GL, winbox show 2GHz.

- RB is not compatible with 900MHz card?
- Or RB is compatible with other company's 900MHz card? If yes, please recommand.
(XR9/UBNT is compatible?)
- Or I have to refer to 900MHz/2.4GHz channel comparison table?
by Roy
Wed Apr 25, 2012 6:57 am
Forum: Wireless Networking
Topic: Routerboard 433 & Wiligear Z-com GZ-901 Help!
Replies: 4
Views: 1980

Re: Routerboard 433 & Wiligear Z-com GZ-901 Help!

Hello,
I also have same problem.
When I installed GZ-901 to RB433GL, winbox show 2GHz.

- RB is not compatible with 900MHz card?
- Or RB is compatible with other company's 900MHz card? If yes, please recommand.
- Or I have to refer to 900MHz/2.4GHz channel comparison table?
by Roy
Mon Apr 02, 2012 3:19 pm
Forum: General
Topic: About RB800
Replies: 6
Views: 2261

Re: About RB800

Hi nomis

MPC8544 of RB800 CPU is dual core or single core?
by Roy
Wed Mar 28, 2012 5:01 am
Forum: General
Topic: RB435G CPU
Replies: 4
Views: 1220

Re: RB435G CPU

RB800 CPU is 64bit?
by Roy
Tue Mar 27, 2012 8:15 pm
Forum: General
Topic: About RB800
Replies: 6
Views: 2261

Re: About RB800

- no, it's still being produced - good: it's fast. bad: it's more expensive and bigger than some other wireless devices we have for sale. RB800 is ideal for very high speed, and extreme environments. -how about point to point effective throughput in indoor? And outdoor. -Can I get CPU specification...
by Roy
Tue Mar 27, 2012 3:50 pm
Forum: General
Topic: About RB800
Replies: 6
Views: 2261

About RB800

Hi All,

- RB800 is about to quit producing?
- What is good point of bad point of RB800.

I want to find High throughput board with 4minipci slot.
Somebody say RB800 will be discontinued. So I wish to know Mikrotik's plan and reputation from user.
by Roy
Mon Mar 26, 2012 5:30 am
Forum: General
Topic: RB435G CPU
Replies: 4
Views: 1220

RB435G CPU

Hi all,

I wish to know detail about RB435G CPU specification.
is it 32bit? or 64bit?

our customer say, 2X2 mimo with 3~5 slot will be not good performance for 32bit CPU and it may cause of malfunctioning.
Wish to get answer from Mikrotik.
by Roy
Tue Mar 13, 2012 4:51 pm
Forum: RouterBOARD hardware
Topic: Hardware watchdog
Replies: 4
Views: 2049

Re: Hardware watchdog

RouterBOARD 4xx series models have hardware watchdog. In the wiki says about watchdog as below. http://wiki.mikrotik.com/wiki/Manual:System/Watchdog =============================================================================================== This menu allows to configure system to reboot on kern...
by Roy
Tue Mar 13, 2012 4:50 pm
Forum: Wireless Networking
Topic: About Watchdog(Hardware and Software)
Replies: 3
Views: 1159

Re: About Watchdog(Hardware and Software)

my question is,

How hardware watchdog works?
wish to know detail about the "hardware" for wathcodog function.
And how different with software watchdog
by Roy
Tue Mar 13, 2012 4:09 pm
Forum: RouterBOARD hardware
Topic: Hardware watchdog
Replies: 4
Views: 2049

Re: Hardware watchdog

Let me know the processing of Hardware watchdog and software watchdog of RB433GL.

In my knowledge, ping watchdog setting is software watchdog.
Then, how processing hardware watchdog?

Wish to know detail.
by Roy
Tue Mar 13, 2012 4:06 pm
Forum: Wireless Networking
Topic: About Watchdog(Hardware and Software)
Replies: 3
Views: 1159

About Watchdog(Hardware and Software)

Our customer request watchdog processing of hardware and software of RB433GL.
In my knowledge, ping watchdog is software watchdog.

How hardware watchdog processing?
Hardware watchdog also need some setting? if yes, let me know how to do.
by Roy
Wed Feb 22, 2012 3:28 am
Forum: Wireless Networking
Topic: Ping Error
Replies: 5
Views: 1795

Ping Error

Using 433GL, I test connect to CPE(AP). ping error.jpg 192.168.1.12 PC can receive ping reply from all(192.168.1.1/2/11) But 192.168.1.11 PC is only receive from 192.168.1.1. cannot receive from 433GL(192.168.1.2). 433GL is set as Station mode. ARP= Proxy ARP. There is no Firewall setting. Let me kn...
by Roy
Mon Feb 13, 2012 1:49 pm
Forum: Wireless Networking
Topic: MESH problem
Replies: 5
Views: 2773

Re: MESH problem

I would suggest to make one of the node as an AP and clients to station-bridge mode.
Then enable Nv2 wireless protocol and use bridge with RSTP protocol mode.
http://forum.mikrotik.com/viewtopic.php?f=7&t=58289
I wish to use above application
by Roy
Mon Feb 13, 2012 8:32 am
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Re: Mesh handover network with no latency time or no packet

Some good points made above,however it's really a test of which is faster,OSPF calculating routes first or handing over between AP's.Down here alot of guys have created mesh networks and although it sounds appealing,it just doesnt do well at all(from what i've seen).Quite a bit of my business is ta...
by Roy
Mon Feb 13, 2012 3:26 am
Forum: Wireless Networking
Topic: MESH problem
Replies: 5
Views: 2773

MESH problem

Hi all, I'm testing 433GL X 3 unit with mesh mode. HT 20/40 above, Chain0/1, HT Guard interval long, Dynamic MESH (there is no noise 5GHz) 433GL mesh.jpg Problem in mesh mode is 1. throughput is just up to 24Mbps. 2. When one of them is disconnected, throughput is very low, so even cannot send small...
by Roy
Sun Feb 12, 2012 2:34 pm
Forum: Wireless Networking
Topic: Connection Speed Help
Replies: 4
Views: 1690

Re: Connection Speed Help

I'm in same situation.

I'm testing with RB433GL X 4 units.
Max throughput is 24Mbps.
All are set as AP Bridge, Dynamic Mesh, interface as mesh.

One of forum friend say, WDS is not supporting frame aggregations in 802.11n.

But I wish at least 50~60Mbps.
Anybody help me.
by Roy
Sun Feb 12, 2012 12:47 pm
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

Re: 802.11n throughput problem

Roy

You will never get 200 mbps using WDS
OK, then how should I set for 200Mbps?
And, do you know maximum throughput in Mesh mode?

skype: roy.s.j.yeo
by Roy
Sun Feb 12, 2012 5:45 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

Re: 802.11n throughput problem

Should look like this. ROS V5
My test result is,
Throughput is from 20Mbps to 100Mbps and very fluctuated.
I'm expecting more then 200Mbps.

What's your throughput result?
You experience 200Mbps with RB?
by Roy
Sun Feb 12, 2012 5:08 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

Re: 802.11n throughput problem

Should look like this. ROS V5
Hi Chewers,
Thank you for your answer. but I cannot find HT extension channel.
ht extension channel.jpg
Is it difference of version?
I'm v5.9
by Roy
Fri Feb 10, 2012 8:42 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

Re: 802.11n throughput problem

Lower Tx Power (u should have around -45 to -55dBm)
Then set AP and Client:
HT Guard Interval to long
HT Extension Channel to Above Control
Select all 7 Options under HT AMPDU Priorities
What it mean " HT Extension Channel to Above Control"
I don't know how it control
by Roy
Thu Feb 09, 2012 3:23 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

Re: 802.11n throughput problem

you have too high signals. try to low the power having at maximum -54/-54 dbm the, show your registration page, showing also ccq. Thank you for your answer. I also tested with lower RSSI. Results are not so good. And I do not think High RSSI is related with low throughput. Yesterday I changed to Mi...
by Roy
Wed Feb 08, 2012 4:02 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

Re: 802.11n throughput problem

any comment?
by Roy
Tue Feb 07, 2012 8:23 am
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Re: Mesh handover network with no latency time or no packet

Roy. Try to use HWMP in Pro-active mode. Set device that have connection to other network as MESH Portal. and use "Re-optimize paths" in your MESH interface. I have done some setup today with HWMP+ and found a huge regression in version 5.11. I've compared it to 4.17v and 4.x was working ...
by Roy
Mon Feb 06, 2012 3:56 pm
Forum: RouterBOARD hardware
Topic: RB-493G ethernet lockups
Replies: 31
Views: 10563

Re: RB-493G ethernet lockups

by Roy
Mon Feb 06, 2012 9:48 am
Forum: General
Topic: 802.11n throughput problem
Replies: 12
Views: 5229

802.11n throughput problem

I'm testing RB433GL with Compex(WLM200N5-23, 2X2 mimo) and UNEX(DNMA-H5 3X3 mimo). My PCs have Gigabit ethernet port. I set - AP-Bridge mode - 5GHz-A/N - 20/40MHz HT Ablove - 5200MHz - HT Tx chain: Chain0, Chain1 - HT Rx chain: Chain0, Chain1 - HT Guard Interval: any - WDS mode: dynamic mesh - other...
by Roy
Mon Feb 06, 2012 6:43 am
Forum: General
Topic: Mesh Configuration problem
Replies: 1
Views: 1273

Re: Mesh Configuration problem

about above question,
40MHz setup, but scan result is 20MHz.
scanresult.jpg
40MHz_setup.jpg
by Roy
Mon Feb 06, 2012 5:43 am
Forum: General
Topic: Mesh Configuration problem
Replies: 1
Views: 1273

Mesh Configuration problem

Hi everyone, I'm testing with RB433GL X4 RouterBoard1 RouterBoard2 RouterBoard3 RouterBoard4 SSID Ether1 192.168.88.1 192.168.88.2 192.168.88.3 192.168.88.4 WLAN1 192.168.88.11 192.168.88.12 192.168.88.13 192.168.88.14 RADIO1 WLAN2 192.168.88.21 192.168.88.22 192.168.88.23 192.168.88.24 RADIO2 captu...
by Roy
Fri Jan 13, 2012 11:38 am
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Re: Mesh handover network with no latency time or no packet

wish to hear comparison between OSPF and MESH.

Which one is better for handover in vehicle track.

Anyone?
by Roy
Thu Jan 12, 2012 4:40 am
Forum: Wireless Networking
Topic: Vehicle Radios and Mesh
Replies: 1
Views: 976

Re: Vehicle Radios and Mesh

Hi,

Did you solved this problem?

wish to share your current result.

Thank you.

email also possible
smyeo(at)naver(dot)com
by Roy
Thu Jan 12, 2012 4:01 am
Forum: Wireless Networking
Topic: Smoth hopping on roaming mobile client, is this possible?
Replies: 6
Views: 2967

Re: Smoth hopping on roaming mobile client, is this possible

Hi Dirk,

Did you solved your roaming problem?

wish to share how did you do it.

smyeo(at)naver(dot)com


Thank you.
by Roy
Thu Jan 12, 2012 3:27 am
Forum: Wireless Networking
Topic: RB411 as client
Replies: 4
Views: 1185

Re: RB411 as client

Hi Alex,

Did you solved your problem?
wish to share with me, I am in same problem.

smyeo(at)naver(dot)com
by Roy
Wed Jan 11, 2012 2:46 pm
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Re: Mesh handover network with no latency time or no packet

additionally,

real configuration is as below
handover5.jpg
and attached calculation table of RSE Distance and Time to reach RSE.
by Roy
Wed Jan 11, 2012 10:26 am
Forum: Wireless Networking
Topic: Mesh handover network with no latency time or no packet loss
Replies: 13
Views: 7099

Mesh handover network with no latency time or no packet loss

I'm planning to build mesh handover network with 433GL in the vehicle track as attached file. Questions. - In the forum say latency time is around one ping lost. is not means one second of latency time. Do you know how to test the latency time and what’s Mikrotik’s result? - Config of RSE(Road Side ...