MikroTik

leoservices

It seems to me to be a problem with the cable, if possible do a "Certification" test with FLUKE DSX-5000 or another scanner that reports external noise, noise between pairs, etc. Connector may also have some bad intermittent contact.

leoservices

Other differences between L3 x L4 License - Level 3 it is not possible to purchase this license separately; it is already installed in CPE. - If you use the "Portal Captive" Hotspot, only 1 customer can authenticate. - UserManager accepts only 10 sessions - It is possible to buy a Level 4 License an...

leoservices

It will be necessary to install RouterOS via NetInstall and the Wiki has the step by step.

https://wiki.mikrotik.com/wiki/Manual:Netinstall

When connecting to the RouterBoard with the reset pressed for more than 15 seconds, does it appear in the netinstall to select?

leoservices

Ping the next hop.
Check: Firewall, NAT, route

Send a preview of your configuration to make it easier to help you.

leoservices

Who good that solved!

leoservices

Is there any OSPF related information in the LOG?

leoservices

Remove this filter. You should not make advertisements for Cymru

add action=accept bgp-communities="" chain=UTRS-OUT disabled=yes prefix-length=32 set-bgp-communities=no-export,MYOWNAS:0 set-out-nexthop=192.0.2.1

leoservices

You can use all 3 routers in the same area. In OSPF you will make a simple balance between these links.

https://wiki.mikrotik.com/wiki/Manual:OSPF-examples

leoservices

Make a backup of your settings out of the device.

Update the firmware and reboot.

https://wiki.mikrotik.com/wiki/Manual:Upgrading

leoservices

Hello
Did you test the link upload? You saw the use of bandwidth when you were testing;

leoservices

Forward all traffic to internal host If you want to link Public IP 10.5.8.200 address to Local one 192.168.0.109, you should use destination address translation feature of the MikroTik router. Also if you want allow Local server to initiate connections to outside with given Public IP you should use ...

leoservices

I tested with an option Use IP Local Address but being with CGNAT but only returns the Public IP.

leoservices

Hello

the best solution I use on my clients is: Do not use NAT on the same router as the PPPoE server

CPU usage is related to the router's process killing connections in the tracing of connections.

leoservices

You can use VLANs even if the sitch is not manageable. Or use hAP as a router, on one port it receives the IP of its current range 192.168.90.X and delivers another range

leoservices

Do the following test:

-> PPP -> Secret - Set the IP of the tunnel to another for example Local 192.168.20.1 Remote 192.168.20.2

leoservices

Hello,

In the Mikrotik Wiki you have a good documentation you can use QuickSet to make it easier. https://wiki.mikrotik.com/wiki/Manual:Quickset

Try to get started and tell us if you have any questions.

leoservices

Great news PWR-LINE AP.

The bad thing is to live in Brazil and we will not have homologated in Anatel because the distributors do not homologate.

leoservices

Only if you use firewall rules.
IP address of the user stay on the address list for a limited time.

leoservices

You can create a script to reset only what you want.

leoservices

Hello,

An easy way is using PPTP, but if you want to use IPsec you have the option of using L2TP with IPSec.
The Wiki has setup example, on youtube you will find step by step

https://wiki.mikrotik.com/wiki/Manual:Interface/PPTP

leoservices

Hello,
Actually the gain with CPU economy is not meaningful depending on the number of rules etc.

I consider it a good practice to interface list, for example WAN to make it easier to create rules for the purpose of control / security "WAN"

leoservices

Hello,
Disable DHCP Server default - Network 192.168.88.0/24

leoservices

Hello,
It is possible, but it is not recommended for security reasons.

Use VLAN to separate.

https://wiki.mikrotik.com/wiki/Manual:Interface/VLAN

leoservices

If possible, please paste your colors here.

Use export

leoservices

Use the command below and see what data is actually coming out through the VPN.

Winbox -> New Terminal or Tool -> Traceroute

 /tool traceroute youtube.com

leoservices

Ideally, MikroTik will manage the whole network becoming the firewall of your network etc. But a simple way to solve your current problem is: create a bridge /interface bridge add to disable the Mikrotik DHCP server put interface from other Router on bridge1 and wlan1 on bridge1 Your "TV etc" device...

leoservices

Hello,

By doing a brief search I found this article and something tells me it's compatible.

https://gigihfordanama.wordpress.com/20 ... kx-nm-10g/

leoservices

Let me see if I get it. You will get internet in a tower, but would it be by cable? In other words, it would have a 4g modem. SXT does point to point and speed you can look in the equipment documentation; remember not to have obstructions to obtain speed and stability. https://mikrotik.com/product/R...

leoservices

Hello, Yes; it is necessary to mark the new connections that arrive by the secondary link and to use the policy of routing to leave by the same link. See an example below /ip firewall mangle add chain=prerouting in-interface=ISP1 connection-mark=no-mark action=mark-connection \ new-connection-mark=I...

leoservices

Hello

You are following the correct procedure; Just check if the file was not subfoldered. Example: /hotspot

What does the newer version do not answer?

leoservices

Hello, I made the basic webproxy settings and recorded a video. see below https://youtu.be/Oy-r1HkS42c /ip firewall nat add action=masquerade chain=srcnat comment="NAT Masquerade " out-interface=wlan1-Link_Internet add action=redirect chain=dstnat comment="Proxy Transparente - MyPC" dst-port=80 prot...

leoservices

Excellent explanation.

Leaving a bit of the NAT subject.

I suggest access control to services / IP services

leoservices

It is a good question.

Not Ipv6 we do not have NAT, so how to intercept http

leoservices

The prices are great.

What bothers me is the taxes my country charges.

leoservices

Hello

In the Wiki there are two examples that I believe to help you.

Take a look at the links below.

https://wiki.mikrotik.com/wiki/WDS_repeater_example

https://wiki.mikrotik.com/wiki/Wireless_WDS_Mesh

leoservices

I have seen in some cases be the equipment of the ISP, which is performing drop.

leoservices

Hello,
You can use address list, whenever a device obtain IP; DHCP places this IP on an address list.
So your NAT - Mascarede rule only does for the Ips that are on this adress list.

leoservices

Very good!

I have not needed so much band yet

leoservices

Hello,
If the image does not deceive me you are using nstreme

Test using nv2 - Wireless Protocol

leoservices

In the link below you have the installation example. See if there is anything different in the procedure you are performing.

https://wiki.mikrotik.com/wiki/Manual:N ... ll_Example

leoservices

Hello
Likely that you did not specify an input interface.

leoservices

I installed Safari on my windows to test and even to login gave problem. But everything works perfectly in Mozzilla FireFox; in the forum history I saw several topics on issues with Safari x Webfig.

leoservices

My suggestion is to use 100% MikroTik and you will be happy. It will not have a high cost to replace this repeater.

https://wiki.mikrotik.com/wiki/Wireless_WDS_Mesh

Check out the wireless signal
Protocol used in both Ex: 802.11
Channel
etc.

leoservices

Hello,
According to the comment in the rule following the link below we can see that: it has to be related and established.

https://wiki.mikrotik.com/wiki/Manual:IP/Fasttrack

as soon as I find more documentation post here

leoservices

Take a test to validate. Increase the security even further by setting the max hold time, this means that you must release the reset button within a specified time interval. If you set t he "reformat-hold-button" to 60s and "reformat-hold-button-max" to 65s, it will mean that you must hold the butto...

leoservices

Hi,

For Winbox access are the following steps

System -> Routerboard -> Settings Button
Uncheck Jump Reset and ok

Option - New Terminal or ssh

system routerboard settings set enable-jumper-rese
t=no

leoservices

Step by step Back up your settings. system backup save dont-encrypt=no export file=BkpScript In Winbox - Files Copy the 2 backup files to your computer. Save at root level Upload routeros-mipsbe-6.41.3.npk /system package downgrade; /system reboot; Reboot, yes? [y/N]: See if this video helps you htt...

leoservices

Hello, Did you upgrade to the firmware / system routerboard upgrade? Netinstall Tip - Disable other interfaces you have on your computer, - Disable Operating System Firewall Starting the RouterBOARD in Netinstall mode Or Keep holding the button for 5 more seconds until until LED turns off, then rele...

leoservices

Hello

In the changelog as per link below, I see that in version 6.42 there have been some modifications regarding the UPS.

If possible, upgrade to test.

Information about what was updated in the versions
https://mikrotik.com/download/changelogs/

leoservices

Some tips to check. Server settings NTP Server Enabled /system ntp server set broadcast=yes broadcast-addresses=192.168.88.255 enabled=yes manycast=no In System - Clock set the Time Zone Name Your firewall has to allow - UDP 123 Client settings Client configuration is located in /system ntp client. ...

leoservices

The plastic part is docking. The antenna connectors are also docked.

If I had an equal model I would make a video to show you. See the video below if it helps anything.
https://www.youtube.com/watch?v=IdqL-LgcpR4

leoservices

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

leoservices

Suggestion
You can use L2TP IpSec

See if this material helps you https://mehmetkaplan.wordpress.com/2015 ... ipsec-vpn/

leoservices

Hello,

Both computers must be in the same broadcast domain.
See Mikrotik firewall if there is no rule preventing this communication.

leoservices

Hello, if you want all your devices to go through the VPN; then you will need to configure the VPN on Mikrotik RouterOS. But if only your laptop needs to go out through the VPN, you configure the laptop to VPN. According to the VyprVPN website there is no speed limit, so theoretically you will not l...

leoservices

How is the routing table of the remote station?

leoservices

Complementing the above response follows the command example to run on new terminal.

export file=backupscript

You can copy the backup to your computer and edit it with a text editor

leoservices

Hello, how are you?

I hope I opened your question.

Yes it is possible to use DHCP, L2 on the physical interface that has VLAN.

leoservices

I recommend that you configure the second firewall as your needs.

leoservices

Tip: Give more details of your need and or project to find the ideal consultant.

leoservices

Wireless mode: Ap Bridge
Create a DHCP Server on the Virtual Interface

IP - Address - Create IP for Wireless Virtual Interface
IP - DHCPServer -> DHCP Configuration

leoservices

Make a test place password for Wifi

leoservices

Yes you can use it. Each client has to arrive with the transparent MAC on Mikrotik

leoservices

Em Mangle as marcas de rota tem que estar pegando a faixa de IP SRC da wireless marcando a rota do ISP1.

Usando o tracert route voce consegue validar se as regras de mangle estão funcionando como o esperado.

Se voce colar as regras aqui no forum ajuda aos demais colegas avaliar e ajudar.

leoservices

Leaving software lighter you can get high processing of packages.

I think this is the concept

leoservices

Swos is suitable for limited hardware. Lighter than RouterOS so when you have good hardware run RouterOS.

leoservices

Hello I can not get past the configuration now but I can give you an idea how to do it. 1 - Install 3G modem standard procedure and put default route of it as distance = 2 2 - Dial inbound connections from the 3G modem to return by the 3g modem like what happens in PCC 3 - In mangle dial so that the...

leoservices

Hello Already having the file with the log in files. You can schedule to send using this command / Tool e-mail send to = "config@mydomain.com" subject = "$ [/ system identity get name] log" \ Body = "$ [/ system clock get date] log file" file = mylog.log http://wiki.mikrotik.com/wiki/Manual:Tools/em...

leoservices

Hello

Apparently it's something on your internet carrier.

Do the following, disable the rule in filter of number 16 and test again.

leoservices

Hi, how are you?
This limit depends on the size of your network and the capacity of your RB.
You can increase and monitor to see the best option that meets your need.

ate breve,
https://goo.gl/t5Wc1g

leoservices

Besides the Wiki is the link that I'm sending officers training conducted by Trainer Mikrotik

http://www.mikrotik.com/training/

leoservices

A web developer will be able to make this integration even if it is via API

leoservices

On Router TPLINK need to have a static route to the network 192.168.88.0/24

leoservices

Protected RouterBOOT

What would be the procedure for those who are using this function and forget the password? How is made the full format of the RB?

leoservices

Hello, would like to make a suggestion to the developers of Winbox; a box for the port field; easy to read / use for some users.

leoservices

Hello, the best way is to use VLAN, the AP you create the SSID to a VLAN ID for employees and other SSID with another VLAN ID to visitors. Thus in Mikrotik you create the VLAN uses the same VLAN ID and assigns different IP ranges for these network. Now you treat differently each to enter the Wireless.

leoservices

If you have more than one network card disable the others, especially if you use VmWare or other which create virtual cards.

leoservices

If you use the trial option hotspot.

leoservices

Not recommend using an old version. Upgrade and be happy.

leoservices

Hello Friends,

Someone can explain me how to limit the size of the file that the user can download?

DROP for files greater than 20M

leoservices

Hello,

I believe that only by developing a system itself to communicate with the API for Mikrotik to accomplish what you want.

leoservices

Hello,

you can try by releasing WalledGarden access the access door Webfig

leoservices

Hello,

I got nothing to help you, believe you tried using the restore option "import"

leoservices

Hello,

the ideal is a routed network where the dude reaches each radio IP without NAT. Do not know if this way you will get success did

leoservices

Hello,

I use the mail server that does not need SSL is simpler.

HowTo
http://forum.mikrotik.com/viewtopic.php ... ilit=gmail

http://www.erico.tk/2011/09/enviando-e- ... gmail.html

Karma

leoservices

Confirms whether SNMP is active in RB and is marked on RouterBoard The Dude.

leoservices

Here in Brazil we maintain RouterBoard 30C to 50C

Use in cooler boxes

leoservices

The modem being in Bridge mode you configure the Mikrotik PPPoE Client and he is already able to dial and connect without problems.

After NAT SRC-NAT out interface PPoeClient Action Mascared

Check if modem is actually in bridge

leoservices

You can have the rule log
below the rule performing an action as Drop, Rejet or Acept

leoservices

suggestion

when viewing log, having the option to clear the screen of log; filter and locate.

leoservices

Hello

when the network starts to get big you should consider changing it to dynamic routing to avoid some bridges in networks.

leoservices

Create a html inside with Mikrotik redirect to the site that you want in the field advertasi put the name of seu.html

ie the mikrotik will call this the html inside the Mikrotik and this in turn will redirect to the desired site.

leoservices

PRTG is an option for monitoring

leoservices

Route your problem resolved?

already thought about 1:1 NAT

leoservices

HTTP is the best choice in IP Firewall Mangle brand you using ports that this game uses and Queue you determine bandwidth and priority.

http://wiki.mikrotik.com/wiki/HTB

leoservices

I also never saw in documentation for information on number of customers, acretido that is related to traffic generated by these customers is very variable.

leoservices

that will be using the script option lease DHCP server would succeed? http://wiki.mikrotik.com/wiki/Manual:IP/TFTP Script that will be executed after lease is assigned or deassigned. Internal "global" variables that can be used in the script: leaseBound - set to "1" if bound, otherwise set to "0" le...

leoservices

are using allow

if you have doubts about the version make a downgrade

leoservices

what version ?
use bridge?

leoservices

You use these rules who are on the link below

http://wiki.mikrotik.com/wiki/Bruteforc ... prevention

leoservices

Ever tried to send new update packages and restart the RouterBoard ?

leoservices

Hello, one possibility is using the RouterOS versin 6.4 that lets you use L2TP Client DNS name instead of fixed IP, so if he ISP1 DOWN name will be updated with the IP s ISp2 enabling closure of tunnel.

leoservices

Cnfiguration is related to time out, or if there is traffic for a time X it will finish. See more details in http://wiki.mikrotik.com/wiki/Manual:IP ... n_tracking

leoservices

You have to choose a routing table. (not interface)

/system telnet address=xxxxxxx port=xxxxxx routing-table=xxxxx

Complementig the respnse friend, you ca precioar the TAB "Key TAB" to see the command options in Mikrotik.

leoservices

Have to test ping to the internet, being within the RB, then test DNS to be able to identify what is not running as expected.

leoservices

good day,

you updated the firmware on RouterBoard system?

There is space on the disc do not see why not work.

leoservices

I know configure OSPF but I have the following doubts: How to deliver PPPoE Public IP clients and I have a / 24 and RB each network will have something like 3 customers who need public IP. I saw this example only shows but like a single router would need to know how and when you have 10 routers, and...

leoservices

I did a downgrade to 5.21 with the same settings as RB returned to normal operation. I was not happy because I could not identify the real cause to contribute to Mikrotik

leoservices

I put in my RB751U 2HnD to version 6.0-rc3 and noticed that processing varies from 5% to 100% with only one client in the wireless with very low traffic. In this New Terminal also slow.

Firmware Version 3.0

leoservices

see if this rule will help you

/ip firewall nat
add action=dst-nat chain=dstnat disabled=no dst-port=27015 protocol=tcp \
to-addresses=10.1.1.5 to-ports=27015

leoservices

It is important to disable packages that you do not use, this will free up more hardware resource.

I´m not good in english

leoservices

I know of no way to check the contents, but you can limit bandwidth for this type of service.

leoservices

How to expand this example to more WANs To have more WANs you have to add additional IP address and additional route with routing-mark, eg, third Then you have have to edit Sections A-C Changes in Section A here we have to adjust nth field value first value is what number of packed we are looking fo...

leoservices

This same. see the following link mikrotik manual http://wiki.mikrotik.com/wiki/NTH_load_ ... masquerade

I'm not very good at English, I hope you have been able to help you

leoservices

Will would do for mangle and once marked packets in Queue

leoservices

check DNS configuration, test ping to the site and want another IP or public, and do not forget the default route for the tunnel

leoservices

No login the visitor can see the graphics. The alternative I know is spreadable by Firewall port 80 allowing only specific IP.

leoservices

If the problem persists please download from Mikrotik again.

leoservices

Can not miss:
IP -> DNS
Select Allow Remote request

IP - Firewall - NAT - ADD -> Action Mascared

leoservices

Virtual AP uses the protocol settings of the actual interface. Equipment at 802.11 is not compatible with NV2.

sorry if you misunderstood, I am weak in English.

leoservices

Some configuration is really limiting your internet.

leoservices

Hello friend, I use these very rules that you'll find in the Mikrotik Wiki. Take a look hopefully help you.

http://wiki.mikrotik.com/wiki/Port_Knocking

leoservices

thank you all for supporting, rather added to my knowledge. I intend to make this year the course MTCINE.

leoservices

An Instructor Mikrotik, said Routerboards not support BGP and Mikrotik FULL. Reported that this task would be better for Linux. I wondered to friends if someone uses FULL BGP with Mikrotik and whether they are satisfied.

I intend to participate in training MTCINE

leoservices

The photo of the facebook fanpage Mikrotik MUM is performed in Brazil, the next to be hit over Christmas think of public record. I'll be there, already bought up flights.

leoservices

See if this tutorial can help, follow this link in Portuguese but you have to translate around with the help of google.

http://andreysmith.wordpress.com/2010/0 ... m-hotspot/

leoservices

Brother in new terminal you already enabled the SNMP protocol?

snmp [enter]
set enable=yes [enter]

leoservices

The two networks connected in their RB already routes are transparent because they are connected. If the network is not directly connected you create a route to this network you want to achieve.
I'm not good at English but I hope to help.

leoservices

Por meio do Canal Mikrotik no youtube tive a oportunidade de conhecer a Mikrotik por dentro.

leoservices

yes it is possible to configure this way, the manual Mikrotik wiki.mikrotik.com

leoservices

try the following: New Terminal you will reset the RB and remove the default settings with the command system-on reset defau = yes then between Winbox via a MAC, IP Adress - put the IP interfaces IP Router on - create the default route IP-configure DNS and check Alow Remote Requests in IPFIREWALL cr...

leoservices

I'm not good at English, but I can tell you have to check connections and Firewall packages - Mangle and using HTB will prioritize, guarantee bandwidth for a destination or application. See the Wiki if you help.
Follow the link

http://wiki.mikrotik.com/wiki/Manual:HTB

leoservices

I was very happy to see this video, I have no money and probably never will have the honor to know the Mikrotik video inside and gave me this trip. I would like to share with you.

http://www.youtube.com/watch?v=H-znoERQ4ok

leoservices

Good evening friends, I'm trying to close a tunnel in OVPN Mikrotik as client and server is Linux - OpenVPN, use the encryption key, the key MikroTik care in public and private, but the server uses DES-EDE3 and could not hit the MikroTik OVPN_Client settings. See below the error that appears in the ...

leoservices

See the Wiki is an example: http://wiki.mikrotik.com/wiki/Two_gateways_failover

leoservices

Or you register the MAC and IP in the ARP or leave it in enabled.
Sorry I know little of English

leoservices

Lots of power for short distances. Decrease the power "TX Power" Use the link to calculate the link. http://www.mikrotik.com/test_link.php

leoservices

Veja no Firewall se não há nenhuma regra que interfira na porta TCP 8291
See the Firewall if there is no rule that interferes with the TCP port 8291

leoservices

script to add that you access via Winbox RB / System / Script ADD and scheduling you click on System / scheduler

leoservices

To return to the default settings you can use the reset button. Then will have access Winbox running.

leoservices

very good new rb

leoservices

Hello everybody, someone managed to solve this problem? I am using OSPF on a network that was fine, until a later add more POP and started the problem discussed here.

Search found 142 matches