Community discussions

MikroTik App

Search found 38 matches

by mrphreak
Thu Jan 15, 2015 2:18 am
Forum: Beginner Basics
Topic: DNS and Internet access when connected through OVPN
Replies: 3
Views: 1646

Re: DNS and Internet access when connected through OVPN

Might want to post your current config (sanitised of course) otherwise people will just be guessing.
by mrphreak
Tue Jan 06, 2015 10:07 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-2HnD-IN vlan preformance from wiki
Replies: 8
Views: 9181

Re: CRS125-24G-1S-2HnD-IN vlan preformance from wiki

I take it you are aware that all Inter VLAN traffic is passed through the CPU so you won't get wire speed??
by mrphreak
Wed Nov 26, 2014 10:57 pm
Forum: Beginner Basics
Topic: Can someone explain Mikrotik CloudRouterSwitches to me ?
Replies: 6
Views: 2511

Re: Can someone explain Mikrotik CloudRouterSwitches to me ?

No, you assign it to the Master Port, which is Port 2 by default (I think, memory is a bit hazy, might be port 1) which is then accessible from any port in the switch group
by mrphreak
Mon Nov 24, 2014 9:15 pm
Forum: General
Topic: Feature request: Netinstall on all ports
Replies: 9
Views: 4399

Re: Feature request: Netinstall on all ports

No, but the RB800 that pizzulicchio has, should.
by mrphreak
Mon Nov 24, 2014 4:10 am
Forum: General
Topic: Mikrotik Training
Replies: 0
Views: 691

Mikrotik Training

Hey Guys,

Just wondering from those of you have completed any of the Mikrotik Certifications, was it worthwhile??

Toying with the idea of running through, but it's quite an outlay, and am already tied into the Cisco and Juniper tracks but are starting to see more Mikrotik turning up.
by mrphreak
Sat Nov 15, 2014 5:11 am
Forum: Beginner Basics
Topic: Tutorials?
Replies: 3
Views: 1957

Re: Tutorials?

Greg has some pretty good stuff floating around his site.

http://gregsowell.com/?page_id=951
by mrphreak
Sun Nov 09, 2014 5:10 am
Forum: Beginner Basics
Topic: Dual Chain
Replies: 12
Views: 8308

Re: Dual Chain

No, leave both chains running.
by mrphreak
Thu Nov 06, 2014 11:07 pm
Forum: Wireless Networking
Topic: help ???
Replies: 1
Views: 871

Re: help ???

If you're after RouterOS 6.18 for the mipsbe then it should be http://download2.mikrotik.com/routeros/ ... e-6.18.npk

Otherwise you'll have to be more specific
by mrphreak
Thu Nov 06, 2014 9:29 pm
Forum: General
Topic: Professional Mikrotik Support
Replies: 5
Views: 2441

Re: Professional Mikrotik Support

You could try reaching out to some of the registered consultants.

http://www.mikrotik.com/consultants/europe/germany
by mrphreak
Thu Nov 06, 2014 9:26 pm
Forum: General
Topic: connect between 2 networks on the same router
Replies: 6
Views: 1878

Re: connect between 2 networks on the same router

Personally I wouldn't use NAT.

Are the computers using the Mikrotik as their default gateway??

Can you post up the whole config of the unit??
by mrphreak
Thu Nov 06, 2014 12:19 am
Forum: Beginner Basics
Topic: Firewall on inter-bridge connections?
Replies: 1
Views: 937

Re: Firewall on inter-bridge connections?

By slaving the interfaces, you're using the 2 switch chips of the RB2011 (One for the GigE ports, and another for the 100s) which turns the ports into a layer 2 switch. In the simplest turns, bridging does the same, although it's run through the RB CPU instead of being processed by specific hardware...
by mrphreak
Wed Nov 05, 2014 11:57 pm
Forum: General
Topic: connect between 2 networks on the same router
Replies: 6
Views: 1878

Re: connect between 2 networks on the same router

If the RB411U is the default gateway for both devices you shouldn't need to do anything, it should route between them unless you have any firewall rules to prevent it.
by mrphreak
Sun Oct 26, 2014 1:36 am
Forum: Beginner Basics
Topic: Dual Chain
Replies: 12
Views: 8308

Re: Dual Chain

Assuming the QRT5s are similarly spec'd (Antenna gain, TX Power etc) to your current back haul then there's no reason you couldn't.
by mrphreak
Sat Oct 25, 2014 4:18 am
Forum: Beginner Basics
Topic: Dual Chain
Replies: 12
Views: 8308

Re: Dual Chain

1. Yes 2. MIMO is just what it says, Multiple In Multiple Out and isn't restricted to just two antennas at each end, 3x3 and higher are becoming more common although more for AP's than PtP or PtMP links 3. Yes, there are two antennas in the single housing, one horizontal, one vertical 4. Depends how...
by mrphreak
Sun Oct 12, 2014 9:32 am
Forum: The Dude
Topic: ROS 6.20 wiped out Dude server
Replies: 11
Views: 4584

Re: ROS 6.20 wiped out Dude server

The Dude hasn't been supported on ROS for quite some time, the package isn't even available for download anymore.
by mrphreak
Tue Oct 07, 2014 2:45 am
Forum: Beginner Basics
Topic: Hello all,
Replies: 16
Views: 4557

Re: Hello all,

Which mangle rules are you having problems with specifically??
by mrphreak
Wed Oct 01, 2014 5:48 am
Forum: General
Topic: RIP from Hell (RIP Bug?)
Replies: 6
Views: 1883

Re: RIP from Hell (RIP Bug?)

RIPv1 has been around since the late eighties and was a Classful routing protocol and didn't carry subnet information in the updates, so Class A addresses will be /8, Class B will be /16 and Class C will be /24 Not surprised it hasn't been noticed if it is a bug as RIP is an outdated and rarely used...
by mrphreak
Tue Sep 30, 2014 11:39 pm
Forum: General
Topic: RIP from Hell (RIP Bug?)
Replies: 6
Views: 1883

Re: RIP from Hell (RIP Bug?)

Sounds almost like you've got some RIPv1 happening somewhere
by mrphreak
Sat Sep 27, 2014 9:43 am
Forum: Beginner Basics
Topic: Two interfece one ip address
Replies: 4
Views: 1700

Re: Two interfece one ip address

Make Port2 master of Port3. They will act as one port with MAC of Port2 so assign IP to Port2.
Does that work on x86 with NICs (I assume because he's talking of a hotspot pc with 4 interfaces)??

Otherwise create a bridge, put port 2 and 3 in it and put the ip address on the bridge
by mrphreak
Mon Sep 15, 2014 10:59 am
Forum: Beginner Basics
Topic: Hello all,
Replies: 16
Views: 4557

Re: Hello all,

Needed to be able to read it a bit clearer, now my eyes are bleeding. # sep/11/2014 13:27:51 by RouterOS 6.5 # software id = FPJJ-FL3J # /interface bridge add admin-mac=4C:5E:0C:21:C3:15 auto-mac=no l2mtu=1598 name=bridge-local protocol-mode=rstp /interface ethernet set [ find default-name=ether1 ] ...
by mrphreak
Sat Sep 06, 2014 2:18 am
Forum: Beginner Basics
Topic: Fastest speed and way to make a PTP Link
Replies: 6
Views: 2846

Re: Fastest speed and way to make a PTP Link

If they're only a metre apart, chances are you've got way too much signal.

Also there have been a few threads claiming that nv2 isn't optimised for AC yet, getting the same results with 802.11? Have you tried using N nv2?
by mrphreak
Fri Aug 22, 2014 6:31 am
Forum: General
Topic: RouterOS Downloads missing from website?
Replies: 4
Views: 1277

Re: RouterOS Downloads missing from website?

http://download2.mikrotik.com/routeros/ ... k-6.18.iso

From the download page, which is working fine here
by mrphreak
Mon Dec 16, 2013 11:14 pm
Forum: General
Topic: Need help with VLANs and Switch Chips
Replies: 5
Views: 1765

Re: Need help with VLANs and Switch Chips

Also, how would I add IP addresses to the RB750 (Running as a switch), tried adding VLAN interfaces to the master port, and adding addresses to those, but no joy.
by mrphreak
Mon Dec 09, 2013 3:26 am
Forum: General
Topic: Need help with VLANs and Switch Chips
Replies: 5
Views: 1765

Re: Need help with VLANs and Switch Chips

Cheers

Yeah, I've lost connectivity or management a few times while I'm trying to wrap my head around the implementation, which isn't fun when the two devices are 10km away.
by mrphreak
Mon Dec 09, 2013 1:36 am
Forum: General
Topic: Need help with VLANs and Switch Chips
Replies: 5
Views: 1765

Re: Need help with VLANs and Switch Chips

And just to confuse the issue, the traffic destined for Vlan9 is currently running on 1 at the moment, planning on switching it over after other problems are sorted.
by mrphreak
Mon Dec 09, 2013 1:35 am
Forum: General
Topic: Need help with VLANs and Switch Chips
Replies: 5
Views: 1765

Need help with VLANs and Switch Chips

Hey Guys, Just got a situation where I'm running a UDP Multicast stream from ether3 on the RB750 through a mess to two output streams on the RB250 at the moment and playback is stuttering and jerking about. And I'd like to run it through the switch chip on the RB2011 to try to cut down latency and e...
by mrphreak
Fri Jun 28, 2013 7:04 am
Forum: Wireless Networking
Topic: Wireless links for IP Cameras - Possible Bridging problem?
Replies: 1
Views: 1621

Wireless links for IP Cameras - Possible Bridging problem?

Hey guys, Have inherited this setup which is misbehaving. There are two remote site cameras, each with RB711-5Hn cards with the wireless and ethernet bridged linking back to a RB433 with the two wireless links and ether1 bridged. When everything is running, there seems to be a bridging loop or simil...
by mrphreak
Thu Apr 18, 2013 2:59 pm
Forum: Wireless Networking
Topic: I get error when inputting command
Replies: 6
Views: 4709

Re: I get error when inputting command

If it's just for a PtP link, just try changing "ht-extension-channel=below-control" to "ht-extension-channel=above-control" and see if it accepts that
by mrphreak
Thu Apr 18, 2013 2:41 pm
Forum: Wireless Networking
Topic: I get error when inputting command
Replies: 6
Views: 4709

Re: I get error when inputting command

Looks like it's not liking "ht-extension-channel=below-control" which is possibly because 5180 is the first channel and there isn't another below it?

Might have to go back to whoever issued the command?
by mrphreak
Thu Apr 18, 2013 2:12 pm
Forum: General
Topic: 433ah Ethernet latency
Replies: 11
Views: 2863

Re: 433ah Ethernet latency

What is

/ip route
add distance=1 gateway=192.168.1.10

doing??
by mrphreak
Thu Apr 18, 2013 1:51 pm
Forum: Wireless Networking
Topic: I get error when inputting command
Replies: 6
Views: 4709

Re: I get error when inputting command

Looks like the command has carriage returns in it, and instead of sending one command, it's trying to send 5 Try /interface wireless set wlan1 adaptive-noise-immunity=ap-and-client-mode band=5ghz-onlyn basic-rates-a/g="" country=australia disabled=no frequency=5180 frequency-mode=manual-tx...
by mrphreak
Thu Apr 18, 2013 9:03 am
Forum: General
Topic: Port Mirroring on RB450G router
Replies: 2
Views: 1722

Re: Port Mirroring on RB450G router

You might find that the port mirror is a function of the switch chip so you might need to add wan as a master-port for ether2
by mrphreak
Wed Apr 17, 2013 1:38 pm
Forum: Wireless Networking
Topic: Problem with transparent bridge using WDS.
Replies: 11
Views: 7350

Re: Problem with transparent bridge using WDS.

Why are you using a transparent WDS Bridge if you're using seperate networks??
by mrphreak
Tue Apr 16, 2013 10:02 am
Forum: General
Topic: Rb800 with Rb816 daughterboard configure switch chip
Replies: 3
Views: 1648

Re: Rb800 with Rb816 daughterboard configure switch chip

Haven't played with the RB800/816 Combo so you might want to wait for someone more experienced to throw their hat into the ring if it's a critical service. Assuming ether1-3 are the RB800 gigabit interfaces and ether4-19 are the RB816 interfaces, so if that's wrong, you'll have to adjust as required...
by mrphreak
Tue Apr 16, 2013 5:44 am
Forum: General
Topic: I think I hosed my installation, forwarded all TCP ports...
Replies: 5
Views: 1246

Re: I think I hosed my installation, forwarded all TCP ports

Winbox via Mac Address an option??
by mrphreak
Tue Apr 09, 2013 10:24 am
Forum: General
Topic: Problem with Mikrotik and bridging
Replies: 4
Views: 6247

Re: Problem with Mikrotik and bridging

add address=192.168.10.1/24 disabled=no interface=ether2 network=192.168.10.0
Shouldn't that be on bridge1??
by mrphreak
Mon Apr 08, 2013 10:38 am
Forum: Beginner Basics
Topic: Portmirroring RB750GL
Replies: 6
Views: 1786

Re: Portmirroring RB750GL

Are ether2, 3 and 5 bridged on the RB750??