I have rb922UAGS-5HPacD as indoor access point with R11e-2HPnD for 2.4Ghz clients. I modified a case meant for rb411/711.
I still need to drill some holes for antenna pigtails.
Really good news! r11eac is seems based on AR9882 2*2, what about AR9880 and 3*3? I saw replies on other forums that compex ar9880 3*3 solution don't work yet with mikrotik. And it is damn expensive :( Would this card (r11eac) work with 912-series (external mini-pcie), not only with rb800/900 board...
Update: new drivers for wlan driver on laptop, now connects a little faster. Maybe next release of routeros will allow for changing HT80 tx power and maybe VHT tab in winbox?
I finally got around to setting this up. rb912uag-2HPnD with Compex WLE900VX minipci-e. Either this card is not "fully" supported or I have more configuring to do. Running btest client from windows 8 laptop through rb912 to CCR1009. It is strange that rx rate is locked at 6Mps.
RB912UAG-2HPnD using Compex WLE900VX advertised as Atheros QCA9880 v2. I do get wlan2 and can connect to it but rx rate limited to 6Mb and not supported to change tx power to "card rates". btest client shows tx at 5Mb and rx getting just over 200Mb udp throughput going from laptop through ...
I should have Compex 802.11ac QC9882 mini pci-e card Monday. Plan to install in RB912UAG-2HPnD as indoor AP with 3 MT 3dbi antenna. Only client I have is Lenovo laptop with built in Intel ac card. Will report back! It will be hard to do, because QCA9882 is 2x2 only :D My mistake, I pulled the datas...
I should have Compex 802.11ac QC9882 mini pci-e card Monday. Plan to install in RB912UAG-2HPnD as indoor AP with 3 MT 3dbi antenna. Only client I have is Lenovo laptop with built in Intel ac card. Will report back!
every LAN is different and throughput will vary depending on how things are connected, quality of the products, etc. I can only comment for my own LAN.
two servers connected between CRS226 1000mb switch via scp:
It should "learn" MAC addresses and store it in the switch chips forwarding database (FDB). In winbox I can goto the switch menu, FDBs and see all the learned MAC and what port learned from in the Unicast FDB tab
I recently bought CRS226 switch to link to my CCR1009 while the brochure claimed 802.3ad(x) compliance I did not find out until after purchase ($300US) and reading the wiki that this is not yet implemented. Seems to be the norm here, show some nice specs ....and then maybe actually get to implementi...
Got one yesterday! Configured as L2 switch, sfp+2 as master, everything else slave and no ip forwarding. I hope to do some performance testing this weekend linked with 10G fibre to my ccr and link aggregation on a few other devices. :) Maybe you can help me get mine configured. I'm trying to run as...
Got one yesterday! Configured as L2 switch, sfp+2 as master, everything else slave and no ip forwarding. I hope to do some performance testing this weekend linked with 10G fibre to my ccr and link aggregation on a few other devices.