Same Issue ver 7.9
CCR1072-1G-8S+

Same problem "MikroTik RouterOS 7.7"

The same question

Thank you mrz i will try

Hello all i have a ISP who send me a 3 peer sessions in BGP two of them are the default and the third is a backup.
When i enable the third peer trafic go through the third peer, can i set distance or some to the third session is there such a options somewhere ?

Hello i have a little problem with the bandwith in my network and i am confused .. when i ping my machine the ping is like this on the attachment When i disable the Queue Simple queues the ping goes to normal state , but it dosnt matter what network i am shaping , i am putting only one queue from a ...

Sorry for the stupid question , but where can i turn on bgp logging..

This is my export /routing bgp instance set default as=38924 client-to-client-reflection=no comment="" disabled=no \ ignore-as-path-len=no name="default" out-filter="" \ redistribute-connected=no redistribute-ospf=no redistribute-other-bgp=no \ redistribute-rip=no redis...

Hello i have a problem with routing BGP

TCP connection established
RemoteAddress=212.70.158.137
Recived notification
Open error: bad remote-as

If someone now what for what reason this is happening pls to say it ..
Thanks in advice

try with
queue type set ethernet-default pfifo-limit=4294967295
queue type set default pfifo-limit=4294967295
And set your Interface queue to be default or ethernet-default

and reply me if it works , tnks in advice!

iv got it , in 3.6 you have to set in queue types ethernet default to be with bigger number of the Queue Size=50 iv make it 500 and it's ok now

Strange but all my routers work like that.. there are 15 supermicro machines U1 and U2 like i said, i am confused
il test it with lower version of ROS like 3.2 , 3.4 .. and if the Bandwidth is better il write it here tnks for the answare gmsmstr and i am sorry for the so bad english

With 2.9.51 works very well , but my cpu usage is 100% , is there a way to make multi-cpu in 2.9.51 ?

Hello i am testing my routers with a mikrotik with version 3.6 and 2.9.51 the mikrotik with 3.6 are make 496Мbps 2.9.51 make 977Mbps I am testing it with "Bandwidth test" , i need the multi-cpu but i need also and a Bandwidth what can i do the 2.9.51 dont have multi-cpu support and i am co...

We now have a PoweRouter 2242 and 2282. Differences is in number of cores. 4 or 8 cores. Up to 22 GigE ports. All tested with MT. It's grate , i am so bad in the hardware and software info , can u explain me with what this router will be bether than this machine with the 2 Xeons - (2x Intel Clovert...

no i use just one for now , how have you done it ?

There is File comment's
File comment: Parameters Old Hardware
File comment: CPU-Load Old Hardware
File comment: The New CPU Load -- this is with the new hardware (2x Intel Clovertown E5310 1.60GHz 8M cache, 1066FSB, Quad core)

3000 clients behind NAT?

Are you buying IPs for $10/a piece? Or what?

Jesus.

No just in our country is not so easy to arange such kind of things

Before this was 100% , I am attaching a pictures to see it the cpu is Intel 3000Mhz
I think somebody will take a lesson from this

sry for the english

It's realy rocks :) I have now 8 procesors :D look at the picture.. 4500 clients on it, Connection tracing enabled , queues for all the clients with pcq , nat for 3000 of them :P :wink: :twisted: 1x Server Case Supermicro CSE-823i-550LP, 550W PSU, 2U, 6 x HDD drives, 1 x 5.25" & 1x Supermic...

I found that all my users who are broadcasting on port 445 135-139 1433-1434 10000 heve a viruses there is no one without virus, thats why i created a rule to put them in address-list / ip firewall filter add chain=forward action=accept dst-port=80 protocol=tcp src-address-list=VIRUSES comment="...

How can i limit the number of connections per ip, i want to limit every ip in the network to have 100 conn max..
tnks in advice!

It will be good also to get just the usual ports , you cant clean your network on 100% but when the network is large it's nice to try to prevent some of the viruses not all ..

Hello , i was searching for script for my liitle idea but i am not soo mutch inside the mikrotik things :) Can somebody provide a script who Detect the infected users and automaticly drop them or redirect them to a page telling them they have a virus infection and they need a good looking antivirus ...

I dont have a idea

It will be good for me if there is tftp also !

With pcq work great ! From 70, 95 CPU Load my CPU is 25 , 40 good ! thanks all !

I have been reached queue1772 what exacly you mean "optimize" can u explain exacly , soory for the english it is bad

Is there a limit on the Queues ?
And do somebody have a big number of clients ? if so , lets say ?

I have a 1100 people on one machine , it works good

The machine is Intel(R)2.7 , 1000 MiB of ram , When there are more people in the network the CPU is 60 - 70 %

Hello all , before to begin sorry for the very bad english .. I have a very strange traffic and i was trying alot of things to stop it , but its still runing i have these messeges from snort , on my gateway after the mikrotik router.. [**] [1:485:4] ICMP Destination Unreachable Communication Adminis...