MikroTik

dmcken

When will you include support for MIPSBE?
No current ETA can be given but won't be years...

Would be much more interested in tile or chr...

dmcken

Is there any easy way to "hint" to an EoIP that the underlying link is a particular MTU (the data path the EoIP tunnel is passing over). I have an EoIP going over a switch to the where the MTU is running at 9000 (other services pass over this connection), the ISP themselves support higher MTUs but s...

dmcken

Good Day, Getting a router reboot on a CCR1072 via watchdog timer, its primarily a BGP Upstream peering router for us. The only weird thing I can think of is we happen to have a hurricane electric IPv6 peering on this router which is over an 6IN4 tunnel and we are BGP peering with Hurricane Electric...

dmcken

With the powerbox pro, are the PoE ports individually controllable?

dmcken

I'm getting http errors posting the second supout.

Is there any other information that would be applicable?

dmcken

Good Day, I am receiving a route from an external peer which I am injecting into OSPF for our other routers to use. For one specific route it is being injected successfully but OSPF seems to be rejecting it (IXP is the source of the route for our network, AGZ is one of the routers OSPF peered with i...

dmcken

Good Day,

Since we can't search profiles in the user manager would it be possible to have this list sorted so we can easily find a profile (most interactions are via the API so it isn't a big problem but if we are troubleshooting an issue we use the GUI to log in and check the issue).

- David

dmcken

Hmm, seems you might be right. One of the backhauls is a mimosa b5c, the other is a (really old, but rock solid stable) AF 24. The mimosa MTU is confirmed at 3200, the air fiber is supposed to be 9000 but I seem to be hitting the issue from this forum post: https://community.ubnt.com/t5/airFiber/AF2...

dmcken

Good Day, I'm attempting to deploy MPLS in our network for TE-tunnels and VPLS. In lab everything works fine and does what we require, in our live network I'm facing some deployment challenges. The first site we activated were our two NOCs and the tower that connects them. What happened is hosts beh...

dmcken

Just checking, any updates with respect to this? Supported or not? @ZeroByte: Dual stack is no longer an option for some of us. ARIN has rejected our last request and given a IPv6 allocation only for our new deployment, we are starting to run short of v4 to give customers. Allot of services are now ...

dmcken

efficient ipv6 routing table lookups on cli (e.g. /ipv6 route print where dst-address=8.8.8.0/24)

I would like this expanded for both IPv4 and IPv6, lookups on my BGP routers take minutes to complete.

dmcken

There appears to be no other way to filter logs other than the topics (where the messages go I mean).

Can account be added (and possibly error removed only 3 topics are supported, critical should imply error IMHO) to the login failure messages?

dmcken

Hmm, that is not good. This is our BGP router (all our upstream's fiber plugs into it at his location) even if the CCR reboots in 15 seconds (BGP peers will take about another minute on top of that) I can't afford to be having that kind of outage on any sort of regular basis. I'll probably wait a we...

dmcken

There is / was a bug when ccr can not access the data storage , and then there is no password for logging in.

The router has since recovered, any idea if / when this was fixed? I'm not using this with a micro sd or any sort of external storage.

dmcken

Have you tried default admin with no password?

Yes, no luck.

dmcken

I have a CCR1036-12G-4S running 6.18 (yes the firmware is upgraded) that is currently not allowing me to login. I'm quite sure I have the username / password correct. -> Winbox isn't connecting (it just sits there saying 'Logging in to xxx.xxx.xxx.xxx). -> Telnet / ssh is returning 'Login failed, in...

dmcken

Two requests:

1. Can we specify the ip netflow is sent as? Changing ips causes disconnects in the data seen (as the interface is tied to the router which is tied to the IP).
2. Is there any way to get the origin-AS to show up in v9 netflow data from the router?

dmcken

I ran a few more tests, on an 1100AHx2 a similar difference occurs (via command line comes up almost instantly, API takes 1 minute, 30 sec, vs a few seconds on CCR command line, CCR API is 5 minutes). So I'm guessing the upgrade removed the difference between the two platforms but there is a common ...

dmcken

Never knew about the check command, your right its a bit limited but it should help with debugging internal OSPF related issues. For BGP related stuff (where allot of routes are going to point to the same link) I'll have to deal with the "in dst-address" method (On my routers that carry full BGP tab...

dmcken

Running 6.15 and upgrading to firmware 3.13 the time is lower at 5 minutes 20 seconds (instead of almost 15 minutes) but still nowhere near the speed of the CLI (about 10-15 seconds).

dmcken

Good day, What syntax do I need to be able to lookup routes like I do on both Cisco and Juniper, e.g. sh ip route 8.8.8.8 Routing entry for 8.8.8.0/24 Known via "bgp (removed)", distance 20, metric 0 Tag (removed), type external Last update from (removed) 7w0d ago Routing Descriptor Blocks: * (remov...

dmcken

Well the 1100AHx2 is unaffected by this issue:

I tried 5.26, 6.10 and 6.15 on the 1100 after iBGP peering it with the CCR to bring the full table.

5.26 took 56 sec, 6.10 and 6.15 take about 1 minute 35 seconds.

I guess I'll have to schedule an upgrade of the CCR to rule out the hardware.

dmcken

rextended: Is there anything specific that indicates an update will fix this? I've been through the release notes and I'm not seeing anything that seems like it has anything to do with this. The reason I am hesitant to upgrade is this router happens to be our Internet Edge which has all the fiber pl...

dmcken

I have a CCR with 3 BGP peers. When I use telnet or similar to do something like this: /ip route> print where dst-address=10.10.10.5/32 I get a response in a few seconds, running the following in the API: /ip/route/print ?dst-address=10.10.10.5/32 Fails to give a response at all on this router (even...

dmcken

Scenario: I have some scripts that use the API to login and collect stats from the tik to feed my monitoring box (zabbix). Problem: I now have a log page full of successful logins in my logs which is hiding any "real" / interesting events that may be happening. I hav not been able to find anything t...

dmcken

Anyone from Mikrotik have any suggestions as to anything I can try?

Or who do I need to speak to with respect to getting the supported hardware list updated?

dmcken

I have a few Cisco brand SFPs, GLC-T which acording to http://wiki.mikrotik.com/wiki/Supported_Hardware is supported on the 2011. I have a pair of CCRs (CCR1036-12G-4S) which I want to use these in (together with some fiber modules). - Links are not coming up on autonegotiation. - If I force gigabit...

dmcken

Well ran through some more testing and thus far I can't recreate the issue. I just decided to renable the ips on the interfaces for the production router and it is working fine, most I have that might give some insight into the issue is a supout I took before starting to debug what was going on. Tri...

dmcken

Yes, the OSPF peering is between a cisco and a RB1100AH running 5.14 (I hope to run a test today between two 450s running the same software version to confirm). The Mikrotik shows the neighbour but no routes are in either the OSPF tables or the normal routing tables. The cisco does not show the Mikr...

dmcken

Some quick testing seems to indicate that the routeros platform can't deal with an OSPF interface with multiple ip addresses on it. This is somewhat normal given that cisco does not allow you to OSPF peer over anything but the primary ip address of an interface. What I want is to be able to peer usi...

dmcken

Thanks...

How the hell did I miss that

dmcken

In what order does a packet passing through a router hit the following chains? forward dst-nat I guess this could also be worded "Are filter rules applied before or after nat rules?" I have a case where I have a particular port being nat'ed to a port on the private ip. The private ip has is also pro...

Search found 32 matches

Re: RouterOS v7.0beta1 (ARM)

Hinting MTU of underlying link to EoIP tunnel

Router reboot due to watchdog

Re: Newsletter 76

Re: Missing OSPF route

Missing OSPF route

Feature Request: Sort usermanager profiles

Re: Controlled rollout of MPLS in existing network

Controlled rollout of MPLS in existing network

Re: Features Request: NAT64 + DNS64

Re: Feature request for v7.x

Feature Request: account topic for failed login

Re: CCR Lock out

Re: CCR Lock out

Re: CCR Lock out

CCR Lock out

Feature requests for netflow / traffic-flow

Re: Optimal way to search ip route when I know the exact pre

Re: Can I lookup the closest match route?

Re: Optimal way to search ip route when I know the exact pre

Can I lookup the closest match route?

Re: Optimal way to search ip route when I know the exact pre

Re: Optimal way to search ip route when I know the exact pre

Optimal way to search ip route when I know the exact prefix

Disable or redirect logging of successful logins

Re: Anything else I can try with Cisco SFP GLC-T?

Anything else I can try with Cisco SFP GLC-T?

Re: OSPF on an interface with two ip addresses

Re: OSPF on an interface with two ip addresses

OSPF on an interface with two ip addresses

Re: Firewall chains order-of-eval

Firewall chains order-of-eval