Community discussions

MikroTik App

Search found 5 matches

by petrsebecek
Mon Feb 20, 2012 4:07 pm
Forum: Wireless Networking
Topic: Wireless client roaming
Replies: 14
Views: 22263

Re: Wireless client roaming

Hi, OK. You have a some routerboards (RB411s in my case). Put eth01 and wlan1 to the bridge, set same SSID and security profile on each RB, but You must have different frequency channels - You can set up it manually or automatically ( DFS mode set to no radar detect in advanced mode). Connect all RB...
by petrsebecek
Fri Feb 17, 2012 5:53 pm
Forum: Wireless Networking
Topic: Wireless client roaming
Replies: 14
Views: 22263

Re: Wireless client roaming

Hi,
resolved. I was configured the AP setting through the auto-script and the same MAC was apllied to all APs... :D
My BIG mistake.

Thanks for your time.


Regards,
Peter
by petrsebecek
Thu Feb 09, 2012 2:52 pm
Forum: Wireless Networking
Topic: Wireless client roaming
Replies: 14
Views: 22263

Re: Wireless client roaming

Hi,

APs are RB411AH with R52N-m and two 7dBi omnidirectional antennas for indoor use. Units are located near the ceiling six meters above the ground. It's a factory envorinment...


Peter
by petrsebecek
Tue Feb 07, 2012 4:22 pm
Forum: Wireless Networking
Topic: Wireless client roaming
Replies: 14
Views: 22263

Re: Wireless client roaming

Hi, thanks for responses. n21roadie: I can't use connect-list, because I'm using User Manager for MAC authentication. TheWiFiGuy: Yes. WirelessRudy: All are moving clients. Can you help me a little with mesh network? I read somethink about HVMP (http://wiki.mikrotik.com/wiki/Manual:Interface/HWMPplu...
by petrsebecek
Thu Feb 02, 2012 6:28 pm
Forum: Wireless Networking
Topic: Wireless client roaming
Replies: 14
Views: 22263

Wireless client roaming

Hello, I want to ask about a wireless roaming for mobile users (2,4Ghz - short distances). All APs are connected by cable to LAN. Distance between APs is about 20 meters. Eth and Wlan interfaces are together in the bridge. I use radius authentication of MAC addresses at User Manager. I have a proble...