MikroTik

mcskiller

Yes, you are using "in" wrong.
But there is a bug with "contains". We will fix that

winbox 3.37 still not works

mcskiller

Yes is ibgp, where i have to change ip? i am using for router-id a loopback ip.
manually set local ip into the bgp connection!

thank! after 5 upgrades/downgrades is working again!

mcskiller

upgrade rb4011 from 7.2.1 to 7.2.3 no bgp connection agains my peers. from one of my peer side can see this in logs: https://i.ibb.co/QPmRcv8/Screenshot-2277.png i have other peer in similar situation. from my side no logs. after a downgrade all is working without touch any config I am sure they ar...

mcskiller

upgrade rb4011 from 7.2.1 to 7.2.3 no bgp connection agains my peers.
from one of my peer side can see this in logs:

i have other peer in similar situation.
from my side no logs.
after a downgrade all is working without touch any config

mcskiller

Update rb4011 from 6.49 to 7.1.3.
everything works fine, only 1 "extrange" problem, i have 2-5% cpu usage at all times doing nothing.

mcskiller

When I open file with .rsc extension then syntax highlighting is used. But after I close Notepad++ and open it again then all is shown as regular text. Choosing syntax from Language menu also doesn't apply it. Only thing what helps is re-open document.

I have same problem

mcskiller

Same here.. ip cloud not working, rb750 latest routeros and firmware.

mcskiller

Has anyone notice one and the same mac address on sfp+ and wlan1 interfaces???

Just after upgrade and reset-config:

Same problem here..

mcskiller

Does anyone have this problem?
the 5g interface does not show the current tx power table

this are the settings:

mcskiller

Today I received my new rb4011 with wifi. Apart from the previously mentioned subjects (usb and lcd) it does not have a beeper either

20190108_153212.jpeg

Enviado desde mi SM-G9600 mediante Tapatalk

mcskiller

Same problem here, before last update netwatch with scripts it was working perfectly. Now in 6.43.2 when a host became down and launch and script it returns :

script,error could not run script hd_up: not enough permissions

Any news from mikrotik ??

mcskiller

try to put a route (ej to public l2tp tunel ip address) using the gateway of isp2 put distance 1 for failover. Doing this u are forcing to establish the tunnel over the second isp then replicate for isp with distance 2. ip route add dst-address=public-ip-of-l2tptunnel gateway=isp2-ip distance=1 and ...

mcskiller

Your end l2tp tunnel have public ip address?

Enviado desde mi LG-D855 usando Tapatalk 2

mcskiller

mimosa.png

Put more info! Plz! Distance? Is the mimosa with conector?
Can u upload a picture of a bandwitdh test ??

mcskiller

This is a MT-Forum so it might be not the right place

U can send me a PM? Plz with screenshots?

Enviado desde mi LG-D855 usando Tapatalk 2

mcskiller

Great. Think of 2 .ac cards working with the same dualpol antenna. So you can do 2x20/40/80 channels in different bands. Software needs some improvements so not all features work, but they are stable. Additionally you can sync them so you can reuse frequencies on the same tower. Working with 3 link...

mcskiller

Tool => graphing

Enviado desde mi LG-D855 usando Tapatalk 2

mcskiller

Nice!
What rb are u using?

Enviado desde mi LG-D855

mcskiller

hello,

are there any plans for a RB2011 with MiniPCI-e slot support ?
it would be great if you could add a LTE interface into these boxes.
usb stick isn´t really sexy in a cabinet or at a business customer.

best
florian

+1

Enviado desde mi LG-D855

mcskiller

Same question for me.

Enviado desde mi RAZR HD usando Tapatalk 2

mcskiller

+1

Enviado desde mi RAZR HD usando Tapatalk 2

mcskiller

I have setup a PPTP server, but I am having no luck connecting to it from my phone. I enabled PPTP Server, Added A PPTP Binding server , added 2 users under secrets, configured a profile for me using a ip pool. I can connect on my windows 8 desktop, but for some reason my windows 8 laptop and my an...

mcskiller

Nice!
Have more info?
Cases of sucess?

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

L2tp + ipsec

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

Bump!!

Enviado desde mi Nexus 7 mediante Tapatalk

mcskiller

+1

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

Same problem on idle with no config cpu on 8% - 10% until lcd screnn is on...

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

I already bought it. This weekend goes into production. The moment of truth.... I will post here the result.
Thank you!

Dont´t forget to post the results!

mcskiller

I don't have any tipe of alarm in my house. And i live in a country house without noise (i the only WiFi in a few blocks)

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

Same problem... Any fix?

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

Put 2 IP public address in ether1gateway create the respective routes and a mark routing for each one. The u can separate segment ej ether2 to ether5 switch or bridge 192.168.0.x and ether6 to ether10 switch or bridge 192.168.1.x then mangle each range of IP whit mark routing. Enviado desde mi XT925...

mcskiller

Review of tp-link throughput lan-wan.

http://www.redeszone.net/tp-link/tl-wdr4300/

In spanish.

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

+1

Enviado desde mi XT925 usando Tapatalk 2

mcskiller

Excelent job!

Enviado desde mi XT890 usando Tapatalk 2

mcskiller

Hi ppl, i have recently upgraded my rb750 from v 5.21 to v6.2 and i noted more ram consumption at same config. Its a bug? Or is properly right in v 6.2

mcskiller

You can also use simple queue /queue simple add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s direction=both \ disabled=no interface=all limit-at=0/0 max-limit=20M/20M name=queue1 \ packet-marks="" parent=none priority=8 queue=default-small/default-sma target-addresses="11.11....

mcskiller

Am I reading this right? An 80 Mile link with dbii cards and ubnt 34dbi rocket dishes? How is that even possible? Do you mean 8 Miles? This blows my mind....

This¡
80 miles with 160mbs is very nice for that gear

Enviado desde mi XT890 usando Tapatalk 2

mcskiller

Add a default route whitout mark and put passtrought = no in mangle rules

Enviado desde mi GT-I9100 usando Tapatalk 2

mcskiller

very useful info. I'm from Argentina too. regards

Enviado desde mi GT-I9100 usando Tapatalk 2

mcskiller

you may have fixed this already, but PCC uses Connection and Routing marks, not packet marks. Queue's use packet marks, so you can do both on the same router. (we are doing it just fine, and we have 7 aDSL lines) Can you put an example plz, i need do a qos over pcc on a same router. Qos need mark c...

mcskiller

Hi, I purchased routerOS v. 5.16 a few days ago for a client I wanted to setup. There's whats happening: They are using two links so I used PCC. But the problem is that one link is using an ADSL router, so the gateway becomes the modem. So the check gateway does not work. I then tried Advanced Rout...

mcskiller

Ty for sharing

Enviado desde mi GT-I9100 usando Tapatalk 2

mcskiller

you may have fixed this already, but PCC uses Connection and Routing marks, not packet marks. Queue's use packet marks, so you can do both on the same router. (we are doing it just fine, and we have 7 aDSL lines) Can you put an example plz, i need do a qos over pcc on a same router. Qos need mark c...

mcskiller

Buena info se agradece.
Good work!

Desde GT-I9100 con Tapatalk

Search found 44 matches