+1 to action = script on routing filters!

We have the same problem with v7.13.1 (last version). How have you fixed it?

We have a problem with > 7.12 and OSPF, some (active) routes are duplicated with the same nexthop, it doesn't make sense.

Please see attachment:

For a type of service that our wholesale bitstream provider provides us with VLAN for each FTTH user, we use a bridge to group all the clients and with horizon we generate isolation between them to be able to have a PPPoE server (BRAS) and subnetting for CPE remote management. The issue is that we h...

Has anyone noticed an improvement with versions 6.49beta22 or higher, or with 6.48.2 and random reboots? I have several in test with the new RouterOS (we have 25 CCR2004 installed on our network) and I continue to have random reboots (often every 2 to 3 days, sometimes 15 days), with devices that on...

Version 6.49beta11 has been released. *) switch - improved packet transmit between CPU and 98PX1012 for CCR2004-1G-12S+2XS device; What improvements does this change on the CCR2004 devices? We have a strange problem with the CCR2004. We have a bridge (with horizon to isolate the customer ports) wit...

My CCR1009-7G-1C after upgraded to 6.45.x, it rebooted every night. The logs says "router was rebooted without proper shutdown, probaly kernel failure. Kernel failure in previous boot." Any solutions? Youre lucky. I have CCR-1072, it not rebooting, just freezes and looking dead every 1-3 ...

Great solution Mikrotik!!!

https://cdr.pl/p6682,mikrotik-pw48-12v8 ... cr-r2.html

We are checking that the new CCR1036-8G-2S+ devices come with dual power supply. The voltage of these is now 12V, previously like the other CCR1036 was 24V. We use centralized 24V DC power supplies and place this accessory: https://shop.meconet.de/Power-Supply/up-to-48-Volt/DC-conversion-kit-from-AC...

+1!!! We have more that 10 CCR1072 but will can't continue with Mikrotik because our edge routers dies when a peer comes down, the route propagation on the iBGP it's too slow... and this supposes a partial fall of half an hour in the best scenario.... What is the issue on your software because at th...

*) tile - fixed Ethernet interfaces becoming unresponsive; I have a very strange problem with a CCR1072. Suddenly there are IP addresses that stop responding, some work and others do not... within the same broadcast (L2) -no routing apply-. There is no problem of firewall or similar, by ARP the MAC...

Solution?... The CRS226 to the trash and change it for CRS326. Incredible but true. I'm sure there's a bug or hw problem but mikrotik just ignores it, and pulls out a new model.

*) tile - fixed Ethernet interfaces becoming unresponsive; I have a very strange problem with a CCR1072. Suddenly there are IP addresses that stop responding, some work and others do not... within the same broadcast (L2) -no routing apply-. There is no problem of firewall or similar, by ARP the MAC ...

Any idea about the problem?

We have the same problem here, three CRS226 installed and all fail randomly, sometimes take months and sometimes several failures in the same week. Suddenly it stops passing traffic to the VLANs... we reboot and it works. There is no complicated configuration, only VLAN. We use RouterOS v6.40.2 Any ...

Are there any plans to make the BGP process multi processor capable?

+1!! Any news about it?