Community discussions

MikroTik App

Search found 12 matches

by dannyn382
Wed Jul 30, 2014 1:50 am
Forum: General
Topic: Pinging Default Gateway
Replies: 10
Views: 2216

Re: Pinging Default Gateway

Hi Van,

Thank you for taking note of those steps. When I reset my unit, I had done those exact steps as well. I do see that IP in the ARP table as well, but still cannot ping.

Thanks!

Dan
by dannyn382
Thu Jul 24, 2014 4:18 am
Forum: General
Topic: Pinging Default Gateway
Replies: 10
Views: 2216

Re: Pinging Default Gateway

Hi Van,

Thank you for your reply. I have tried doing as you say to no avail. I have also tried to reset the device and use a default configuration and that did not work either.

Let me know if you think of anything else.

Thanks!

Dan Nelson
by dannyn382
Thu Jul 17, 2014 2:15 am
Forum: General
Topic: Pinging Default Gateway
Replies: 10
Views: 2216

Re: Pinging Default Gateway

Hi Van, Thank you for your information. I tried as you said and have spoken with the carrier and still have not come to a resolution. As you stated, I can see in the packet sniffer with no ports an ICMP ping, but no reply. I would lean to say that something is wrong with the carrier, but the fact th...
by dannyn382
Sun Jul 13, 2014 11:20 pm
Forum: General
Topic: Pinging Default Gateway
Replies: 10
Views: 2216

Re: Pinging Default Gateway

Hi Van, Thank you for your reply. When I have chain=srcnat action=src-nat to-address=1.1.1.1 src-address=10.1.1.0/24 enabled, I get the expected output in the packet sniffer that you describe below. I have lines, among other, that state: interface -> ether1-gateway direction -> tx scr address -> 1.1...
by dannyn382
Sat Jul 12, 2014 7:37 am
Forum: General
Topic: Pinging Default Gateway
Replies: 10
Views: 2216

Re: Pinging Default Gateway

Hi and sorry for my delayed response. I thought I subscribed to the thread, but I did not recieve an email. I tried what you suggested below, but to no avail. I also tried disabling all the NAT enabled and just using chain=srcnat action=masquerade to-addresses=0.0.0.0 out-interface=ether1-gateway, w...
by dannyn382
Wed Jul 09, 2014 1:13 am
Forum: General
Topic: Pinging Default Gateway
Replies: 10
Views: 2216

Pinging Default Gateway

I am having an issue pinging the default gateway on my network. If I configure the interface using DHCP, I can ping the default gateway telling me that it is connected properly. If I remove DHCP and configure it manually, I can no longer ping the default gateway. When I configure a laptop with the s...
by dannyn382
Sun Mar 17, 2013 6:58 am
Forum: General
Topic: L2TP/IPSEC Routing
Replies: 2
Views: 1282

Re: L2TP/IPSEC Routing

I seem to have figured it out. Or at least on Windows. On Windows I used the -p switch to make the route persistent across reboots, and I used the if parameter to make this route monitor when the interface is up or down. It works as planned, is added when the interface comes up(VPN) and removes it w...
by dannyn382
Fri Mar 15, 2013 11:29 pm
Forum: General
Topic: L2TP/IPSEC Routing
Replies: 2
Views: 1282

L2TP/IPSEC Routing

Hello all, My issue is I need to push a route to the client when they connect to the L2TP/IPsec VPN. ROS does not support this and will not until Version 6 with mode-cfg. Unfortunately I need it now. I emailed ROS support and he suggested that I add a route to the client, which when I do that it wor...
by dannyn382
Fri Mar 09, 2012 8:54 pm
Forum: Wireless Networking
Topic: WDS
Replies: 4
Views: 830

Re: WDS

Why would you not use WDS?

Static IP's are not an option. I would think that the MP3 that you were playing was probably buffered into Winamp.

Thanks for the help!

Dan
by dannyn382
Fri Mar 09, 2012 1:36 am
Forum: RouterBOARD hardware
Topic: SFP module
Replies: 101
Views: 59146

Re: SFP module

If this is a feature that you are thinking about implementing, it would be nice if we could have a SFP slot so that we could use any that we wanted dending on the current installation needs.
by dannyn382
Fri Mar 09, 2012 1:22 am
Forum: Beginner Basics
Topic: I need help to access my Mikrotik 450G from my Home
Replies: 13
Views: 1630

Re: I need help to access my Mikrotik 450G from my Home

I am not trying to hijack this thread, but how would you configure the router to be able to use Winbox from the external IP?
by dannyn382
Fri Mar 09, 2012 1:14 am
Forum: Wireless Networking
Topic: WDS
Replies: 4
Views: 830

WDS

Hello, I am looking to build a WDS network. I want to have all of the back-hauls over copper, so no mesh, just wireless distribution with 2.4gHz radios. If this is all set up properly, how much wireless client active roaming will be able to be done? How long does it take the user to switch to the ne...