Community discussions

MikroTik App

Search found 60 matches

by vaah
Wed Oct 07, 2020 8:41 am
Forum: Wireless Networking
Topic: MikroTik HAP AC2 - unable to get 867 Mbit/s on 5 Ghz - LOCAL network
Replies: 15
Views: 7044

Re: MikroTik HAP AC2 - unable to get 867 Mbit/s on 5 Ghz - LOCAL network

Thanks everybody! I performed configuration reset, and it seems to work now. What I find strange, is that I'm getting 867 only when I place my laptop right next to the router. Otherwise the speed varies significantly. Below I'm sending my current setup and NAS Drive read/write speeds (laptop placed...
by vaah
Thu Jun 21, 2018 7:58 pm
Forum: General
Topic: getting ip from mikrotik VLAN for ubiquiti UAP
Replies: 7
Views: 2629

Re: getting ip from mikrotik VLAN for ubiquiti UAP

Hello I just managed to get L3 discovery working and I'm happy with that. How do you do that? RIght now ubiquiti controller can't see my APs when I want to make changes to them. However both SSIDs and respective VLAN works ok. From my knowledge, the AP itself needs to get ip, however since I set up...
by vaah
Thu Jun 21, 2018 10:09 am
Forum: General
Topic: getting ip from mikrotik VLAN for ubiquiti UAP
Replies: 7
Views: 2629

Re: getting ip from mikrotik VLAN for ubiquiti UAP

Does that mean, in general, if you only have one trunk line and no managed switch that you will need to have a Mikrotik device that supports hybrid ports (afaik only QCA8337, AR8327 switch chips) in order to setup a management VLAN interface on Ubiquiti Unifi access points (APs), assuming you may e...
by vaah
Thu Jun 21, 2018 10:06 am
Forum: General
Topic: getting ip from mikrotik VLAN for ubiquiti UAP
Replies: 7
Views: 2629

Re: getting ip from mikrotik VLAN for ubiquiti UAP

Hello I just managed to get L3 discovery working and I'm happy with that. How do you do that? RIght now ubiquiti controller can't see my APs when I want to make changes to them. However both SSIDs and respective VLAN works ok. From my knowledge, the AP itself needs to get ip, however since I set up...
by vaah
Wed Jun 20, 2018 1:55 pm
Forum: General
Topic: getting ip from mikrotik VLAN for ubiquiti UAP
Replies: 7
Views: 2629

getting ip from mikrotik VLAN for ubiquiti UAP

Hello, I use RB1100 to manage 2 VLANs (vlan 2 and vlan 15). I set up trunk port on eth 9 & 10, I have 2 ubiquiti AP with 2 ssid; 1 for my private use (vlan id 2) and the other one is for guests (vlan id 15). Now this works alright at the moment, I can access both ssid getting ip and able to acce...
by vaah
Thu Jun 14, 2018 1:43 pm
Forum: General
Topic: Bring back the BEEPs
Replies: 1
Views: 822

Re: Bring back the BEEPs

I have sxtsq5ac that's missing the beep too.
Although i wouldnt be able to hear the beep when it reboots since it was mounted on a pole on my roof. The sxt sa5ac has the beeper tho..
by vaah
Wed Jun 13, 2018 4:58 pm
Forum: General
Topic: How set static ip address for bridge A and B? [SOLVED]
Replies: 7
Views: 4501

Re: How set static ip address for bridge A and B? [SOLVED]

What I meant about routes, was to not forget to add some on bridge devices. Because it they are in 192.168.18.0/24, then by default, they have no idea where to find your PC. So you need either default route and continue from there, or direct route to 192.168.20.0/24 via Router B. Hi Sob, I wanna sa...
by vaah
Tue Jun 12, 2018 8:21 pm
Forum: General
Topic: How set static ip address for bridge A and B? [SOLVED]
Replies: 7
Views: 4501

Re: How set static ip address for bridge A and B? [SOLVED]

Yeah like you said. I use the same address aa dynamic one when setting the static ip manually. Also, i don't masquarade traffice from router B, i have properly set up static route to 192.168.20.0/24 on router A, so host in lan of Router A can access the host in router B. I have not set up any firewa...
by vaah
Tue Jun 12, 2018 9:47 am
Forum: General
Topic: How set static ip address for bridge A and B? [SOLVED]
Replies: 7
Views: 4501

Re: How set static ip address for bridge A and B? [SOLVED]

Hi, Currently the dhcp ip address lease by the dhcp server works alright. However, I want to set the ip address in bridge A & B with static ip manually set within the respective device itself. not given by router A. the address would be the same as i laid out on my network diagram, 192.168.18.7 ...
by vaah
Tue Jun 12, 2018 5:14 am
Forum: General
Topic: How set static ip address for bridge A and B? [SOLVED]
Replies: 7
Views: 4501

Re: How set static ip address for bridge A and B? [SOLVED]

bump, anyone?
by vaah
Mon Jun 11, 2018 5:59 pm
Forum: General
Topic: How set static ip address for bridge A and B? [SOLVED]
Replies: 7
Views: 4501

How set static ip address for bridge A and B? [SOLVED]

So I want to know how i can set working static address for my bridge A and B. my current network.png The above is my network diagram. router A & bridge A are located at site A and Bridge B and Router B are at site B. Bridge A is SXT SA5AC set up as bridge AP and Bridge B is SXTsq 5 ac as station...
by vaah
Thu Feb 22, 2018 11:45 am
Forum: Wireless Networking
Topic: SXTsq G5acD max real throughput?
Replies: 12
Views: 4567

Re: SXTsq G5acD max real throughput?

My tests from yesterday (80MHz, room test, iperf3 tcp, 6.42rc30) 1. nstreme - stable 180Mbps - it seems it's max for nstreme regardless of device 2. nv2 - unstable, max that I seen was about 300Mbps 3. any - unstable too, max that I seen was about 550Mbps It looks that MT is on a good road, but sti...
by vaah
Tue Feb 20, 2018 11:14 am
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

Re: How to diagnose sxt sa5ac wireless problem?

Looks like the wireless card died, The sxt qlite5 will work you just need to set the band to 5Ghz only N and not AC Yeah looks like it. I did netinstall a few times. And the other day i was getting some ssid popped up when i scan the wireless. But it wont connect. After a reboot, it was back to not...
by vaah
Tue Feb 20, 2018 6:53 am
Forum: Wireless Networking
Topic: SXTsq G5acD max real throughput?
Replies: 12
Views: 4567

Re: SXTsq G5acD max real throughput?

i have sxt SA5AC connected to SXTsq 5AC creating a PTP connection with a distance of 300m, getting only 20mbps when using nstreme, then i switched to 802.11. To my surprise i get 300mbps RX, 400mbps TX. not sure why i don't get the same rate both direction. I'm pretty happy with the 802.11 result. ...
by vaah
Mon Feb 19, 2018 6:37 am
Forum: Wireless Networking
Topic: SXTsq G5acD max real throughput?
Replies: 12
Views: 4567

Re: SXTsq G5acD max real throughput?

i have sxt SA5AC connected to SXTsq 5AC creating a PTP connection with a distance of 300m, getting only 20mbps when using nstreme, then i switched to 802.11. To my surprise i get 300mbps RX, 400mbps TX. not sure why i don't get the same rate both direction. I'm pretty happy with the 802.11 result. s...
by vaah
Tue Feb 06, 2018 7:47 am
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

Re: How to diagnose sxt sa5ac wireless problem?

On another note, I'm planning to get SXTsq Lite5 for the time being, is it gonna work with my sxt sa5ac? I notice my current wireless is ac and the SXTsq Lite5 will be using normal wireless n standard.
by vaah
Tue Feb 06, 2018 7:41 am
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

Re: How to diagnose sxt sa5ac wireless problem?

Okay, I did netinstall and the symptom is still the same, wireless scan doesn't show anything. Is my SXT consider a goner now?
Anyone else have any suggestion?
by vaah
Sat Feb 03, 2018 6:15 pm
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

Re: How to diagnose sxt sa5ac wireless problem?

Yes, i did reset config on it, by pressing the black button near the ethernet port. Still nothing came up on wireless scan tool result. I haven't done netinstall however. I'll try it and report back. but i'm a bit skeptical.
by vaah
Fri Feb 02, 2018 10:34 am
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

Re: How to diagnose sxt sa5ac wireless problem?

I added screenshot to explain better what i meant. This is the SXT at my site, I ran scan and freq. usage tools. Selection_057.png Selection_056.png And this the SXT AP, when I ran scan and freq. tools. You will see this one can see other SSIDs around the premise. Selection_058.png Selection_059.png...
by vaah
Fri Feb 02, 2018 10:18 am
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

Re: How to diagnose sxt sa5ac wireless problem?

BUMP..
anyone got ideas?
by vaah
Wed Jan 31, 2018 6:29 pm
Forum: Wireless Networking
Topic: How to diagnose sxt sa5ac wireless problem?
Replies: 8
Views: 2392

How to diagnose sxt sa5ac wireless problem?

I have 2 SXT5AC i set up as ptp bridge between house A and B with distance of about 200-300 meters . This afternoon suddenly the one at my house B acting as station bridge disconnected. It wouldn't reconnect to the AP. I reboot the device and it still wont connect. I begin to suspect there might be ...
by vaah
Mon Aug 21, 2017 3:36 pm
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

Hi, thanks for the help, so i tried fiddling with the tx power but i got bad signal strength around -60 ~ -65dBm, i started from 8 to 15 dBm and it only improved the signal very little. and yes i want my subnet be different from my parent house, because there's a router in my house. Also this way my...
by vaah
Mon Aug 21, 2017 8:50 am
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

As you can see, link has been down 21 times, but at the moment it's been working again for 3 hours without problem.

things to note, my CCQ is still bad, sitting at 65~75%, also distance field says 1km, but actually our place is just 200meters apart.
Selection_034.png
by vaah
Mon Aug 21, 2017 8:41 am
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

1. Lower your TX Power, best is around -55dB
2. Check for clean Channel
Hello, how do i lower my tx power? right now, from tx power tab, i see Tx Power Mode set as "default". Do you want me to change this?
Antenna gain is currently set to 0 dBi.
by vaah
Mon Aug 21, 2017 8:29 am
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

/export file=namehere Sent from Tapatalk # aug/21/2017 12:26:53 by RouterOS 6.40.1 # software id = P83D-1L95 # # model = SXT G-5HPacD r2 # serial number = 66B6067429E2 /interface bridge add name="Wireless Bridge" /interface wireless security-profiles set [ find default=yes ] supplicant-id...
by vaah
Mon Aug 21, 2017 6:18 am
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

Alright, I disabled my connect list. it's still giving me the same frequent disconnection. How do i export my sxt config to show you here?
by vaah
Sun Aug 20, 2017 7:36 pm
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

Regarding your question about the station bridge mode. I use the mikrotik to extend internet from my parents home to my home. The internet modem is located at my parents home, then there's a router to manage home wifi etc, i feed the lan cable to sxt ap, and then i set up ptp station bridge for my h...
by vaah
Sun Aug 20, 2017 6:34 pm
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

Hello, Have you used tools like scan and snooper? Maybe you have a bad neighbor that blasts in the 5Ghz band. Depending on your resource$, you could use a spectral analyzer to detect non 802.11 devices. Otherwise, intermittent problems are the worst to diagnose. You could try activating wifi logs a...
by vaah
Sun Aug 20, 2017 5:56 pm
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

Re: SXT SA5AC keeps dropping out connection, why?

forgot to mention, I set up those 2 sxt as AP bridge and the other one as station bridge, my signal strength from station bridge is, Tx/rx signal strength: -40/-37 dBm. I am not sure if those are good number or not. When the bridge works, ccq only sit at best at ~85%, i was hoping i can get close to...
by vaah
Sun Aug 20, 2017 5:19 pm
Forum: Wireless Networking
Topic: SXT SA5AC keeps dropping out connection, why?
Replies: 17
Views: 6229

SXT SA5AC keeps dropping out connection, why?

I have 2 SXT SA5AC set up between 2 site, they are only 150-200 meters apart, there is good line of sight. Initially both sxts are using ROS 6.39. There have been 4 instances where when i had drop outs, it kept dropping out, and then it fixed itself after maybe an hour, but the time it took to fix i...
by vaah
Tue Jun 27, 2017 9:53 am
Forum: Wireless Networking
Topic: SXT S5AC link down intermittently
Replies: 3
Views: 1093

Re: SXT S5AC link down intermittently

Well turns out it was the router os. I had upgraded it to the latest version available, i decided to downgrade it and it came back to normal state. No connection dropouts.

Sent from my SM-T705 using Tapatalk
by vaah
Sat May 27, 2017 8:03 am
Forum: Wireless Networking
Topic: SXT S5AC link down intermittently
Replies: 3
Views: 1093

Re: SXT S5AC link down intermittently

also, now the transfer speed won't go over 9MB/s, cables is cat5E, and the router RB450G, both pc network card is gigabit. yesterday the transfer speed was 20-25MB/s.
by vaah
Sat May 27, 2017 7:59 am
Forum: Wireless Networking
Topic: SXT S5AC link down intermittently
Replies: 3
Views: 1093

SXT S5AC link down intermittently

I bought 2 SXT SA5AC, i wanted to set them up for point to point link. I followed a guide and succesfully get them working, last night I can transfer large file between 2 device with max transfer speed of 20-25MB/s so maybe roughly 200mbps. Today I tried to transfer files again, I got this unstable ...
by vaah
Sat May 27, 2017 7:40 am
Forum: RouterBOARD hardware
Topic: RouterOS and Embedded PC
Replies: 6
Views: 2195

Re: RouterOS and Embedded PC

what do you plan to do with it? are u gonna use it as a router and modem? it seems overkill for home purpose. also how much power will that system draws, compare to getting a mikrotik router+wifi device? Btw, how much is that embedded pc cost?
by vaah
Sun May 07, 2017 5:44 am
Forum: Wireless Networking
Topic: SXT 5 AC vs SA5 AC
Replies: 14
Views: 3181

Re: RE: Re: SXT 5 AC vs SA5 AC

@jarda: After reading the posts again: Yeah, for such a short distance my proposal isn't relly important. It seems more 'academic'. @mistry7: I fully agree. Nowadays I always recommend LHG5 for any cheapish link. No matter how short the link might be. I only use SXTs if appearance, available space,...
by vaah
Sat May 06, 2017 7:06 pm
Forum: Wireless Networking
Topic: SXT 5 AC vs SA5 AC
Replies: 14
Views: 3181

Re: RE: Re: SXT 5 AC vs SA5 AC

You might want to turn the SXT-SA 90 degrees. This will turn the Beamwidth from horizontal 90° to vertical 90°. This makes you PtP-link more interference resistant, because it is unlikely to have neighboring WiFi below or upwards... Can u explain this more in detail? Do i turn the sxt 90 degrees up...
by vaah
Fri May 05, 2017 6:14 pm
Forum: Wireless Networking
Topic: SXT 5 AC vs SA5 AC
Replies: 14
Views: 3181

Re: RE: SXT 5 AC vs SA5 AC

I'm looking to buy 2 SXT SA5 AC to create ptp link between 2 house that is aproximately 500-700m apart. Is there any drawback if i use SA5 AC instead of 5 AC? Will they work just fine? Is the sector antenna is okay for the ptp link? I'm leaning toward the SA5 AC because my friend had 2 unused SA5 A...
by vaah
Fri May 05, 2017 6:04 pm
Forum: Wireless Networking
Topic: SXT 5 AC vs SA5 AC
Replies: 14
Views: 3181

Re: RE: SXT 5 AC vs SA5 AC

I'm looking to buy 2 SXT SA5 AC to create ptp link between 2 house that is aproximately 500-700m apart. Is there any drawback if i use SA5 AC instead of 5 AC? Will they work just fine? Is the sector antenna is okay for the ptp link? I'm leaning toward the SA5 AC because my friend had 2 unused SA5 A...
by vaah
Fri May 05, 2017 4:06 pm
Forum: Wireless Networking
Topic: SXT 5 AC vs SA5 AC
Replies: 14
Views: 3181

SXT 5 AC vs SA5 AC

I'm looking to buy 2 SXT SA5 AC to create ptp link between 2 house that is aproximately 500-700m apart. Is there any drawback if i use SA5 AC instead of 5 AC? Will they work just fine? Is the sector antenna is okay for the ptp link? I'm leaning toward the SA5 AC because my friend had 2 unused SA5 AC...
by vaah
Mon Apr 17, 2017 2:24 pm
Forum: General
Topic: Feature request - DNSCrypt support...
Replies: 173
Views: 80707

Re: Feature request - DNSCrypt support...

+1
I'd like to see DNScrypt be implemented into RouterOS, I currently use tomato router to get the DNScrypt working.
by vaah
Wed Mar 15, 2017 3:33 pm
Forum: Wireless Networking
Topic: Considering setting up ptp link between my parents house to my house, any advice?
Replies: 13
Views: 2957

Re: RE: Re: RE: Re: RE: Re: RE: Re: Consider setting up ptp link between my parents house to my house, any advice?

You cant get more than 100mbit on any SXT LITE because they have 100mbit ethernet ports, on that distance you will cap at 100mbit speeds due lan limitation, even tho you may get 300mbit wireless speeds on that distance. If you want more than 100mbit get regular SXT which have gigabit ports, you sho...
by vaah
Wed Mar 15, 2017 5:29 am
Forum: Wireless Networking
Topic: Considering setting up ptp link between my parents house to my house, any advice?
Replies: 13
Views: 2957

Re: RE: Re: RE: Re: RE: Re: Consider setting up ptp link between my parents house to my house, any advice?

You cant get more than 100mbit on any SXT LITE because they have 100mbit ethernet ports, on that distance you will cap at 100mbit speeds due lan limitation, even tho you may get 300mbit wireless speeds on that distance. If you want more than 100mbit get regular SXT which have gigabit ports, you sho...
by vaah
Tue Mar 14, 2017 4:51 pm
Forum: Wireless Networking
Topic: Considering setting up ptp link between my parents house to my house, any advice?
Replies: 13
Views: 2957

Re: RE: Re: RE: Re: Consider setting up ptp link between my parents house to my house, any advice?

No, that is not correct. Lite models can work for point to point links. Non-Lite models are only needed for multiple clients. One client is enough here, so even two SXT Lite 5 would be good enough. 5GHz is always better, because there is less interference in this band. Especially if there is clear ...
by vaah
Tue Mar 14, 2017 3:09 pm
Forum: Wireless Networking
Topic: Considering setting up ptp link between my parents house to my house, any advice?
Replies: 13
Views: 2957

Re: RE: Re: Consider setting up ptp link between my parents house to my house, any advice?

No, that is not correct. Lite models can work for point to point links. Non-Lite models are only needed for multiple clients. One client is enough here, so even two SXT Lite 5 would be good enough. 5GHz is always better, because there is less interference in this band. Especially if there is clear ...
by vaah
Tue Mar 14, 2017 3:02 pm
Forum: Wireless Networking
Topic: Considering setting up ptp link between my parents house to my house, any advice?
Replies: 13
Views: 2957

Re: RE: Re: Consider setting up ptp link between my parents house to my house, any advice?

I am considering setting a point to point link between my house to my parents house. Line of sight between these 2 houses is about 400-500 meters. This link will be a wan source from my place and lan line between 2 premises. Will 2 of sxt lite5 suffice for my purpose? Whats the difference between s...
by vaah
Tue Mar 14, 2017 12:29 pm
Forum: Wireless Networking
Topic: Considering setting up ptp link between my parents house to my house, any advice?
Replies: 13
Views: 2957

Considering setting up ptp link between my parents house to my house, any advice?

I am considering setting a point to point link between my house to my parents house. Line of sight between these 2 houses is about 400-500 meters. This link will be a wan source from my place and lan line between 2 premises. Will 2 of sxt lite5 suffice for my purpose? Whats the difference between sx...
by vaah
Thu Mar 15, 2012 9:16 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

How do i torch? Sorry tho i can call myself tech savvy but I've just started to learn mikrotik recently :) I had a look at the torch apps, what should i put into those field? I tried to torch ether1 where the internet connection going into, but it seemed that there's no activity? On another note, th...
by vaah
Thu Mar 15, 2012 7:19 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

Hi Jackman, I decided to move my clients into rb450g network, rather than going thru the hassle. :) So right now the linksys only serves as wireless AP. Regarding the PPTP VPN that I set up earlier, I am suffering very slow response when running my application through it. The nature of this applicat...
by vaah
Wed Mar 14, 2012 10:03 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

I've set up pptp server, following this guide http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP , I can successfully connect to pptp server, but i can't see anything that belongs to linksys router. Is this a static route problem? The following is my routingtable: [admin@MikroTik] > /ip route print...
by vaah
Wed Mar 14, 2012 5:45 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

was my static route alright in my rb450g?
Now I'm switching the role, rb450g will dial out ppoe to adsl modem via bridging mode, and linksys will connect to rb450g. I want to set up vpn using the 450g, that's why i swicth the router role. hopefully everything goes smoothly.
by vaah
Tue Mar 13, 2012 7:22 pm
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

Hi just wanna report back. The problem solved. I dont know how i do it, it just fixed itself. :shock: This router is very random lol , anyone experience something like i did? I said that because when the 2-way communication between 2 router is solved, I tried to detach the linksys and hook up my mik...
by vaah
Tue Mar 13, 2012 11:09 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

Could you disable the whole accept action first on every chain in your firewall? base on those configuration it should work.
Ppl usually tell me to enable NAT masquerade. In this case i don't it, right? because linksys is feeding the internet connection so i guess we dont need to maquerade?
by vaah
Tue Mar 13, 2012 9:55 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

I can ping 10.10.10.1 from linksys but not to 10.10.10.252. It's like all the traffic to 10.10.10.252 is lost.
Fyi I can ping 10.10.10.252 from 10.10.10.1 which is the mikrotik using winbox.
by vaah
Tue Mar 13, 2012 9:15 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

my goal is for any host residing in linksys router (192.168.18.0/24) to be able to communicate with host in 10.10.10.0/24. thats why i try to ping from ether5 whose address,192.168.18.24, is dynamically assigned by linksys router.
any idea?
by vaah
Mon Mar 12, 2012 8:05 pm
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

This is my ping output from interface ether5 to 10.10.10.252 which is my laptops ip address. [admin@MikroTik] > /ping count=10 address=10.10.10.252 interface=ether5 HOST SIZE TTL TIME STATUS 10.10.10.252 timeout 192.168.18.1 84 64 0ms redirect host 192.168.18.1 84 64 0ms redirect host 192.168.18.1 8...
by vaah
Mon Mar 12, 2012 5:48 pm
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

Nope, so lets move on. Can you post /ip address print /ip firewall export /interfaces print detail there you go. [admin@MikroTik] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 X 192.168.1.0/24 192.168.1.0 LAN (Eth1) 1 10.10.10.1/24 10.10.10.0 ether2...
by vaah
Mon Mar 12, 2012 2:36 pm
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

Yes that is correct. Can you post /ip route print detail A little correction, my net id in linksys one is 192.168.18.0/24 [admin@MikroTik] > /ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P ...
by vaah
Mon Mar 12, 2012 1:02 pm
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

What are you running on the Linksys? Can you add static routes in it? I run tomato 1.27 on linksys. yep I can add static route. rb450g got ip address 192.168.18.24 from linksys, so I already put static route as follows: dest addrs: 10.10.10.0 net mask:255.255.255.0 metric:0 gateway 192.168.18.24 in...
by vaah
Mon Mar 12, 2012 4:57 am
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Re: Problem comunicating hosts between network in 2 router

could you tell me what i should put in the routing table?
by vaah
Sun Mar 11, 2012 8:20 pm
Forum: Beginner Basics
Topic: Problem comunicating hosts between network in 2 router
Replies: 26
Views: 4528

Problem comunicating hosts between network in 2 router

Hi all, I have RB450G and linksys wrt54g connected. wrt54g is the internet gateway to my network, its network id is 192.168.1.0/24. then i connect rb450g ether5 to wrt54g. ether5 is dhcp client, so it obtains ip address from wrt54g. I set ether2 as dchp server with net id 10.10.10.0/24. I don't set ...