Community discussions

Search found 12 matches

by tommasox
Wed Jun 29, 2016 4:41 pm
Forum: Scripting
Topic: Free Hotspot Management Software (with RouterOS PHP API clas
Replies: 12
Views: 21364

Re: Free Hotspot Management Software (with RouterOS PHP API clas

Hello to all sorts , you can install it on a dedicated Linux servers? if so what do you recommend distro ? I usually use ubuntu
by tommasox
Fri May 15, 2015 1:55 pm
Forum: Forwarding Protocols
Topic: using 1 wan inteface for access winbox
Replies: 14
Views: 1295

Re: using 1 wan inteface for access winbox

Make sure your NAT rules are not failing to work properly. NAT is really simple, though: /ip firewall nat chain=srcnat out-interface=ether1-WiFast action=masquerade chain=srcnat out-interface=ether2-loop.argiturismo action=masquerade You might also want to add to the output chain of mangle table (b...
by tommasox
Tue May 12, 2015 6:24 pm
Forum: Forwarding Protocols
Topic: using 1 wan inteface for access winbox
Replies: 14
Views: 1295

Re: using 1 wan inteface for access winbox

I made the configuration as below but when I enable the route does not go on the Internet , or rather when I enable the routing mark on gateways I forgot to point out that you also need to add local routes for the two WAN networks into the other routing tables. dst=192.168.1.0/24 gateway=ether1 rou...
by tommasox
Tue May 12, 2015 12:50 pm
Forum: Forwarding Protocols
Topic: using 1 wan inteface for access winbox
Replies: 14
Views: 1295

Re: using 1 wan inteface for access winbox

are not new routeros I started using it since version 2.9.35 ... but I have never needed to make a marker packet , I'd rather use this solution , and maybe because I have two gateways in case of down the satellite using the land you can help me? Basically, you need to follow these steps: Do connect...
by tommasox
Mon May 11, 2015 4:20 pm
Forum: Forwarding Protocols
Topic: using 1 wan inteface for access winbox
Replies: 14
Views: 1295

Re: using 1 wan inteface for access winbox

ok I'll try and let you know ... if I still need help I'll know because you are so gentili..un other info how do I make an autoswitch between the two gateways in case one of the connections I go down ? I was told taking a ping ip for example google DNS 8.8.8.8 are not new routeros I started using it...
by tommasox
Mon May 11, 2015 3:37 pm
Forum: Forwarding Protocols
Topic: using 1 wan inteface for access winbox
Replies: 14
Views: 1295

Re: using 1 wan inteface for access winbox

You could use mangle to mark routing on traffic coming to the router via terrestrial DSL, then add a route with that route mark so that traffic that enters via terrestrial DSL exits via terrestrial DSL. are not new routeros I started using it since version 2.9.35 ... but I have never needed to make...
by tommasox
Sun May 10, 2015 10:44 am
Forum: Forwarding Protocols
Topic: using 1 wan inteface for access winbox
Replies: 14
Views: 1295

using 1 wan inteface for access winbox

Good morning everyone, I have a Resort with two connections a 1 terrestrial DSL , a DSL Tooway . Connection tooway not have the public IP so I can do the management of the router remotely , but at the same time is the defaul route structure , how do I keep tooway as defaul primary route and continue...
by tommasox
Sat Aug 23, 2014 5:30 pm
Forum: General
Topic: CRS 125-24G-1S Bridging
Replies: 1
Views: 457

CRS 125-24G-1S Bridging

Hi , As stated in the title I have a problem with the bridge of the CRS, I'll explain, if I create a bridge, where I put some in about 18 ports on the router, everything works, but the ip address that I assign to the bridge that use for maintenance 192.168.8.x / 24 after about a minute does not work...
by tommasox
Thu Jun 20, 2013 9:12 am
Forum: RouterBOARD hardware
Topic: RB 2011UAS-RM & SFP MODULE 100MB
Replies: 0
Views: 644

RB 2011UAS-RM & SFP MODULE 100MB

HELLO, I need help, I wanted to know if exits already a module SFP compatible with 100 mb, because I is a multimode fiber 50/125 by 660 meters and with no salt form 1.25GB I installed two media converts to 100mb and everything works but they wanted eliminated and put the module on board the routerbo...
by tommasox
Wed Apr 04, 2012 1:44 pm
Forum: The User Manager
Topic: graph occurred in the number of successful connection to the
Replies: 0
Views: 614

graph occurred in the number of successful connection to the

as the title I have a client who asked me if there is a possibility to keep a record of communications that occurred with in the hotspot server because it is a structure at the end of the season must submit a report of the total accesses to his superiors.
by tommasox
Wed Apr 04, 2012 1:40 pm
Forum: The User Manager
Topic: RB-1100 with freradius
Replies: 1
Views: 895

Re: RB-1100 with freradius

ok I solved the problem, I set the radius in the same class hotspor, I moved the radius of other eth and assegano a class all its own and it worked.
by tommasox
Thu Mar 15, 2012 7:28 pm
Forum: The User Manager
Topic: RB-1100 with freradius
Replies: 1
Views: 895

RB-1100 with freradius

hello, hello all, I will explain in brief my problem, I have a great wifi network on a structure on top of this network installed Hoi An RB-1100, where I activated the hotspot service, now my problem is that the customer has a Radius server running with FreeRadius and wants to continue to use this m...