First of all, now I want to know if this behavior is normal.
Do I have to see that ipv6 and route by default or do not?

Oh my god! It actually looks like there is no any real ipv6: [admin@Ya-router] > /ipv6 address print Flags: X - disabled, I - invalid, D - dynamic, G - global, L - link-local # ADDRESS FROM-POOL INTERFACE ADVERTISE 0 DL fe80::2cc8:1bff:fe8d:4007/64 LAN no [admin@Ya-router] > or a route: [admin@Ya-ro...

So you do not need MT2 to act as a router for IPv6, you only want it to be accessible via IPv6, correct Yes, I don't want MT2 to do any routing. I want to use it only as a WiFi extender, but I want to have Ipv4 and ipv6 on it. Getting an ipv4 was done with easy. I just did set dhcp-client on the br...

On MT2 look at this setting: /ipv6 settings print ... accept-router-advertisements: yes-if-forwarding-disabled ... You have to change it: /ipv6 settings set accept-router-advertisements=yes Sorry, my bad. I had tried those settings, but missed them here. I have just set: /ipv6 settings set accept-r...

Hi! I have a "classic" he.net connection for years. My end is on my MT(MT1). I have assigned manually one IPv6 address for the bridge(LAN) with three eth ports and one for WLAN interface, All clients successfully get their IPv6 via SLAAC. I've checked a lot of times with https://test-ipv6....

Thank you guys! I need at least one device in order to use it as an dual-band repeater and I think "hAP ac lite" is a good and cheap solution. In a good case I'll use only one device("hAP ac lite"). In the worst case I need to change the repeater mode for 2.4Ghz on "hAP ac l...

Hi!
I want to power "mAP lite" with POE from "hAP ac lite" powered with DC jack. Is it ok? Will this chain work fine?
https://mikrotik.com/product/RB952Ui-5ac2nD
https://mikrotik.com/product/RBmAPL-2nD

There is no revision here :-( > /system routerboard print routerboard: yes board-name: RB1100AHx4 model: RB1100x4 serial-number: ----- firmware-type: al2 factory-firmware: 6.44.5 current-firmware: 6.46.8 upgrade-firmware: 6.46.8 Do you mean I'm there? https://forum.mikrotik.com/viewtopic.php?t=149062

My new RB1100x4 hung twice in last week. I had to make factory reset to return it to life both times

Does anyone have RB1100x4 working stable with this version?

Hi! I have an RB1100AHx2 connected to the real serial port(not USB). My server has no OS installed, so I work from SystemRescueCD (it is based on ArchLinux) It looks like the MT is connected to /dev/ttyS0 How to connect to it? What I will see after successfully connection? Can you share your picture...

No changes?

Released 6.30 in Latest?

May be proxy open and you serve externals? I did not understand your question. I am not a service provider. This is an medium-sized hotel. I just activated the web proxy to achieve capture pages that my clients use, just that. Proxy have any user authorization or allowed IP restrictions? Check inco...

May be proxy open and you serve externals?

Add method POST and custom headers(as curl -H) support to /tools fetch.
Need for Yandex API, for example.

Hi, I updated my RB951G to 6.30rc26 and now my DynDNS script fails,...I'm a beginner with Mikrotik, but debugging the script I saw that the /tool fetch command always return "Error 400 bad request". I downgraded to 6.29.1 and works fine with the same script. Regards! maybe post your scrip...

Fixed in 6.30rc24, check please.

Error confirmed – Ticket#2015063066000237

Hello,

thank you for insisting on the problem. This will be fixed in the next release.

This problem seems to be present even in ROS 6.29.1. Mikrotik, could you please do something about this?

Confirm problem.

ROS 6.30rc22 I need open url for update my ipv6 address at nsupdate.info. Fetch fork fine for ipv4 url, but failed for ipv6. How to fetch ipv6 url? IPv4 [admin@MikroTik] > /tool fetch mode=https keep-result=no url="https://xxx:xxx@ipv4.nsupdate.info/nic/update" status: finished IPv6 [admin...

Try queue type "ethernet-default"

I do many test. Results very different, depend of port speed, NIC. My max speed in intervlan routing is 50mbit/sec. Current CRS series must be used in end-user environment (access level), with one mgmt ip, minimum services and CCR on top level for routing, filtering, etc. http://forum.mikrotik.com/v...

wirespeed only for L2, not for L3

Please, post more photos.

CRS - switch, not router. I have same results in my tests

Same situation, master port in 10mb/sec half duplex if disconnected.
If master port changed state (connect/disconnect), all slaves do redetection.

CRS125-24G
master-port ether2

sorry for my english.

i use CRS125-24G-1S w many vlan. intervlan routing very slow. may be 15mb/sec at maximum.

hello! i have two mt rb1100ah mt1 have two real ip on two interfaces. mt2 have one real ip. i need create two separate l2tp tunnel from mt2 to mt1. mt1: /interface l2tp-server server set authentication=mschap2 default-profile=l2tp-server enabled=yes /interface l2tp-server add name=l2tp-xxx user=xxx@...