Community discussions

MUM Europe 2020

Search found 187 matches

by advantz
Wed Jun 04, 2014 7:02 am
Forum: General
Topic: TX Drops in VLAN.
Replies: 4
Views: 3306

Re: TX Drops in VLAN.

try to disable multi-cpu.
Let me know if this resolve the problem :D
by advantz
Sat May 05, 2012 5:41 am
Forum: General
Topic: x86 CoreRouter problem with v5.X
Replies: 11
Views: 4498

Re: x86 CoreRouter problem with v5.X

From version 5.x we have problem with our core router. We have it on 3 diferent server, but same problem. With multicore enabled, server reboot on unequable time. With multicore disabled everything is ok, but cpu is than on: 100% all time. On version 4 we have no problem with this just on version 4...
by advantz
Sat May 05, 2012 5:37 am
Forum: General
Topic: Bypass nics card support?
Replies: 1
Views: 728

Bypass nics card support?

Bypass nics card support?

like interfacemasters.com
by advantz
Mon Apr 23, 2012 7:16 pm
Forum: General
Topic: Comments on 6.0b2
Replies: 15
Views: 5777

Re: Comments on 6.0b2

simple queues didn't work...
by advantz
Thu Jan 27, 2011 6:48 am
Forum: General
Topic: v4.16 released
Replies: 74
Views: 12982

Re: v4.16 released

Hi, #CASE01 I use GA-H67MA-UD2H and Core i5 2500 SSD Corsair NOVA 32GB I managed install 4.16 successfully but after reboot : Loading system with initrd ERROR : Could not find disk! Please attach it somewhere else. I already tried changing NATIVE, LEGACY, AHCI, IDE none of them works :D sometimes sy...
by advantz
Sun Jan 02, 2011 3:21 am
Forum: General
Topic: v4.16 released
Replies: 74
Views: 12982

Re: v4.16 released

4.16 cannot configure tx-power?

it always set to default if I set to 30db it shows 19db (default)

I think 4.16 mipsle wireless and wireless-nv2 broken...
established wireless link but cannot ping!
by advantz
Fri Aug 29, 2008 6:23 pm
Forum: RouterBOARD hardware
Topic: Problem upgrading license from lv 3 to lv 4 w/extra channels
Replies: 4
Views: 1857

Problem upgrading license from lv 3 to lv 4 w/extra channels

I got problem upgrading rb411 v3.3 comes with level 3 to level 4 with extra-channels This is level 3 license key : -----BEGIN MIKROTIK SOFTWARE KEY------------ jA6BWZe/wx9W+IqQDMYkiZh0iS6oSggLRwpLRQYdnok9 zoUXh8FjLu99ovEpt5eAxHUTo+4VUfhXyfKvvg1tnC== -----END MIKROTIK SOFTWARE KEY-------------- This ...
by advantz
Sat May 17, 2008 1:11 pm
Forum: RouterBOARD hardware
Topic: RB411 restart
Replies: 7
Views: 1837

Re: RB411 restart

nmp-8602 is ok for me...
but board is very hot, no heatsink attached
by advantz
Tue Oct 23, 2007 7:25 am
Forum: Wireless Networking
Topic: Wireless registration problem!
Replies: 4
Views: 816

Re: Wireless registration problem!

@jwcn
I don't want to use WEP/WPA

@tgrand
client is not ROS, it's senao/jaht ap
by advantz
Sat Oct 20, 2007 5:05 pm
Forum: Wireless Networking
Topic: Wireless registration problem!
Replies: 4
Views: 816

Wireless registration problem!

I recently found that mikrotik allow multiple registration for multiple clients with SAME mac-address and only 1 registration shown [MT-wireless ap-bridge] |_____[00:11:22:33:44:55 = 1st client] |______[00:11:22:33:44:55 = 2nd client (mac clone)] |_______[00:11:22:33:44:55 = 3rd client (mac clone ag...
by advantz
Mon Jun 18, 2007 9:44 am
Forum: General
Topic: World of Warcraft going high latency! like 3000ms +
Replies: 7
Views: 1534

Re: World of Warcraft going high latency! like 3000ms +

If you using PCQ set upload and download for simple queue to 0/0 aka unlimited, and set pcq in queue type to match your upload/download bandwidth

cmiiw
by advantz
Thu May 03, 2007 6:09 am
Forum: Wireless Networking
Topic: How to block a certain MAC address?
Replies: 6
Views: 1614

Yeah, got same problem lately.

How to block 2 or more client with SAME MAC ADDRESS connected to mikrotik AP?
Registration only shows 1 connected client <-- this is not true, I detected 2 client connected but SAME MAC ADDRESS.

Looks like mac spoofing
by advantz
Fri Apr 13, 2007 4:53 am
Forum: Wireless Networking
Topic: lighiting storm
Replies: 11
Views: 1941

Re: lighiting storm

hello guys i lost a routerboard and 2 wireless card during lighting storm hit the omni directily


thr RB112 has been gone


do you think guys that i should change the omni or just keep it?
I think the omni is gone because being hit by direct lightning, why you keep it?
by advantz
Tue Apr 10, 2007 1:57 am
Forum: Wireless Networking
Topic: How to create station/client bridge without WDS?
Replies: 3
Views: 1155

How to create station/client bridge without WDS?

I'm sure this is posibble... but I don't know how... :P
I know this is beyond the standards 802.11 won't allow this...

I heard that mac nat can do this...
Need guide to do this..
Thank you
by advantz
Fri Apr 06, 2007 1:34 am
Forum: RouterBOARD hardware
Topic: Faster CPU. Is it in plan?
Replies: 28
Views: 5631

I'm hoping you guys could produce xscale systems :D
thank you
by advantz
Sun Mar 11, 2007 7:21 am
Forum: General
Topic: Nice to Read v2.9.40
Replies: 30
Views: 7614

I left mikrotik for bgp routing.
Using zebra is far superior than mikrotik.
by advantz
Sun Mar 11, 2007 7:13 am
Forum: General
Topic: Nice to Read v2.9.40
Replies: 30
Views: 7614

I left mikrotik for bgp routing.
Using zebra is far superior than mikrotik.
by advantz
Sat Mar 03, 2007 5:49 am
Forum: RouterBOARD hardware
Topic: What can the 532 board handle?
Replies: 8
Views: 2852

actually 532a@400mhz not so fast board compared to celeron 400mhz
cpu usage already 100%

I need faster board :D
by advantz
Fri Feb 16, 2007 4:57 pm
Forum: Wireless Networking
Topic: 3 Mini-PCI board, Not rb153
Replies: 16
Views: 3133

Rb153 is stable, why do you think it's not? We will have some new devices with 3 miniPCI but not so soon.
maybe it's because too weak cpu resources...
my celeron 300mhz works better than rb532a@400mhz :D
by advantz
Sat Feb 03, 2007 1:41 am
Forum: Wireless Networking
Topic: MT v3.0b5 - CSMA Disable Throughput Data
Replies: 14
Views: 12814

Try running your tests without NStreme and see how things work. We had a real world envirnoment with 32 CPE and ping times were horrible with NStreme enabled. Turning it off gave us consistent ping times in the range to 2-5ms. With NStreme on were we seeing 20-160ms! I like the idea of NStreme, pol...
by advantz
Thu Feb 01, 2007 2:51 pm
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

it is a bug, which will be fixed in the next release.
thank god ^_^
by advantz
Thu Feb 01, 2007 2:29 am
Forum: Wireless Networking
Topic: Going mad with this... Anyone have idea how to do this?
Replies: 9
Views: 1675

Re: Going mad with this... Anyone have idea how to do this?

I got Mikrotik box with 2 ethernet cards. I dont wont to bridge interfaces. http://img265.imageshack.us/img265/9257/gejtvejtv3.png Client connected to ether2 have IP adress: 192.168.2.2 / 24 with gateway: 192.168.2.1 Client connected to ether1 have IP adress: 192.168.3.2 / 24 with gateway: 192.168....
by advantz
Thu Feb 01, 2007 2:19 am
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

Wow!
400 MHz to over 40GHz!
Now I want that radio card ....

[seriously, that's really strange. An ROS/card compatibility, or is the card damaged?]
It's supported by ROS. Of course card works fine. I'm able to create link using these cards :D
by advantz
Tue Jan 30, 2007 5:45 pm
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

If it can show unusuall frequencies but doesn't mean it will work not true! if `info print` can show them, it means you can use them. have you seen my previous post up there? (only partial screenshot I made) info print showed a lot of "CRAZY" channels.. 1 interface-type=Atheros AR5211 chip-info="ma...
by advantz
Tue Jan 30, 2007 1:07 am
Forum: Wireless Networking
Topic: Notice: dont use NMP 8602 cards, please
Replies: 18
Views: 6389

clearly stated on documentation mikrotik supported that card.

But why the hell in the world you want to use it?
Is that because of 400mW? try SR5 :D
by advantz
Tue Jan 30, 2007 1:05 am
Forum: Wireless Networking
Topic: Radio Card Atheros AR5213
Replies: 2
Views: 902

Re: Radio Card Atheros AR5213

I have the problem

That I can`t see the radio name on my AP 5Ghz in registration
have check config. Is there a problem with the card, i have the problem with 2

Thanks
why don't you post your exported wireless config here.
by advantz
Tue Jan 30, 2007 1:02 am
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

If it can show unusuall frequencies but doesn't mean it will work
by advantz
Tue Jan 30, 2007 1:00 am
Forum: Wireless Networking
Topic: ptp link more than 10 mbit needed
Replies: 3
Views: 1244

route if possible, no conntrack
by advantz
Tue Jan 23, 2007 4:09 pm
Forum: Wireless Networking
Topic: the best minipci card for Routerboard532
Replies: 4
Views: 1179

Re: the best minipci card for Routerboard532

Hello, wich the best Minipci card that provides 400mw for the routerboard 532
what's the point using such large tx-power?
all atheros cards show great performance on routerboard
by advantz
Wed Jan 17, 2007 3:11 am
Forum: General
Topic: Routing-test 3.0 :shock:
Replies: 7
Views: 4186

what about bgp, is it new?
by advantz
Wed Jan 17, 2007 3:05 am
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

just try it :D

different hardware revision makes your hunt completely fun :D

i have 5211 with 2312-2732 band is a/b-only, if you want it, give me your email address :D
by advantz
Tue Jan 16, 2007 3:12 pm
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

not all ar5212 support 2312-2732

linksys wmp55ag is atheros 5212a chipset but didn't have 2.7ghz

just hunt all 5212a cards, especially from proxim b/g cards, they're all using atheros 5212a
by advantz
Tue Jan 16, 2007 1:58 pm
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

screenshot was made and in screen shot you can clearly see that application is winbox, so it has to be connected to routeros box, so routeros supports that frwq, you just need to get card that supports that. i do not see where is the problem? :? and what normis said - that for this moment he does n...
by advantz
Tue Jan 16, 2007 4:30 am
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

i got the refrenece for 2.7 Ghz from forum ....... but there is not mentioend the card manufacrer simple is that iam looking for 2.7 ghz card atleast if 2.9 ghz is not aviable iam not facing any problem iam asking for solution for 2.7 Ghz mini pci which are supported 2.7 Ghz hi I need "chip info" f...
by advantz
Tue Jan 16, 2007 4:29 am
Forum: Wireless Networking
Topic: Extended frequency reqiured for 2.7-2.9 Ghz
Replies: 39
Views: 6952

I don't think there are ANY cars that support 2900Mhz
Wanna bet?

Image
by advantz
Thu Jan 11, 2007 4:07 am
Forum: Wireless Networking
Topic: Best Dual-Polar Antenna for 5.8GHz ?
Replies: 12
Views: 2021

I believe up to 80mbps half duplex can archived if using directional antennas, e.g solid dish :D
by advantz
Wed Jan 10, 2007 4:04 am
Forum: Wireless Networking
Topic: 5.8 antenna works on 5.2
Replies: 6
Views: 1332

you can use 2.4ghz antennas for 5ghz operation over short distance :D
by advantz
Wed Jan 03, 2007 2:36 pm
Forum: Wireless Networking
Topic: (Solved) Huge Headache configuring a simple Access Point.
Replies: 15
Views: 2072

try to ping ovislinks ip, any ping replied??

your mode is client bridge, no ip required for ovislinks to get connected to AP from your computer.
Ip required for management only :D
by advantz
Wed Jan 03, 2007 2:30 pm
Forum: Wireless Networking
Topic: a/b/g mode
Replies: 38
Views: 7956

what is super?

mikrotik doesn't support all super features?
e.g.
AR=adaptive radio
XR=extended range
Compression (supported)
by advantz
Wed Jan 03, 2007 2:19 pm
Forum: Wireless Networking
Topic: Atheros 5005
Replies: 5
Views: 2809

if it's recognized, then it means it is supported and working. if you have some disconnect problem, it has nothing to do with drivers. send your supout.rif file to support and we will look at your configuration. also - defaults always work best @normis from pci list, the device is detected but not ...
by advantz
Sun Dec 31, 2006 3:45 am
Forum: General
Topic: PENTIUM D 945 3.40Ghz
Replies: 3
Views: 1455

why would you want to use dual core :P
that d 945 is very hot (cpu and northbridge chipset too)
by advantz
Sun Dec 31, 2006 3:44 am
Forum: General
Topic: winbox ussage huge B/W
Replies: 9
Views: 1530

As far as I know, winbox uses lots of resources (CPU) not bandwidth
by advantz
Sun Dec 31, 2006 3:42 am
Forum: General
Topic: ask mikrotik bgp command "show ip bgp neighbor"
Replies: 9
Views: 3706

i now use mikrotik ver 2.9.38, i also got this error with my bgp. i just restart the router and BGP can established again, but the connection to internet is very slow. what's meaning this error? dec/26 23:09:09 route,bgp,info TCP connection established dec/26 23:09:09 route,bgp,info RemoteAddr=202....
by advantz
Sun Dec 31, 2006 3:28 am
Forum: General
Topic: Fast Browsing .. Normal long time downloading
Replies: 92
Views: 23340

I think the only solution for samsoft08 for now is queue tree or simple queues with parent.
by advantz
Tue Dec 26, 2006 12:43 am
Forum: General
Topic: ask mikrotik bgp command "show ip bgp neighbor"
Replies: 9
Views: 3706

I don't think mikrotik great for bgp right now....
I've problem with it since 2.9.20+++, never tried it again then ;p


I think 203.191.43.0/24 already advertised by other provider??
Is this your own ip? your customer ip? or your upstream provider ip?
by advantz
Tue Dec 26, 2006 12:33 am
Forum: General
Topic: winbox not opening again
Replies: 4
Views: 798

Re: winbox not opening again

when i tried to open a particular machine i got the following error message: winbox.exe has encountered a problem and needs to close. we are sorry for the inconvinence. i tried by deleting the folder %appdata%/mikrotik but it is still not working please help. try to upgrade or downgrade from latest...
by advantz
Tue Dec 26, 2006 12:32 am
Forum: General
Topic: HIDDEN MK
Replies: 2
Views: 884

Re: HIDDEN MK

hi ,

is there any way i can hide my MK from being visible at the winbox scan ?
what is mk??

I'm thinking of /ip neighbour discovery feature??
just disable it! :D
by advantz
Tue Dec 26, 2006 12:29 am
Forum: General
Topic: RouterOS as DNS Server
Replies: 7
Views: 1615

well if you want to use easy dns management, just try free dns service laying on the internet, like zoneedit, freedns, etc. :D
by advantz
Sat Dec 23, 2006 4:07 pm
Forum: General
Topic: RouterOS as DNS Server
Replies: 7
Views: 1615

mikrotik dns's is dns client and name caching only.

NO A,CNAME,NS records will spread to the world, If I'm correct! :P
by advantz
Sat Dec 23, 2006 3:51 pm
Forum: General
Topic: Fast Browsing .. Normal long time downloading
Replies: 92
Views: 23340

squid feature : body size, come in handy in this case... e.g body size larger than 1Mb -> set queue to 64kbps otherwise set 256kbps... of course simple html and php usually doesn't have size larger than 1Mb mikrotik didn't have this! :D Tag Name reply_body_max_size Usage reply_body_max_size (KB) Des...
by advantz
Tue Nov 14, 2006 12:40 pm
Forum: General
Topic: emule port - but something weird
Replies: 11
Views: 2932

why only forward ports?

try this first :
chain=dstnat dst-address=84.36.214.134 action=dst-nat
to-addresses=172.16.1.202 to-ports=0-65535

still got low id??
by advantz
Sat Oct 21, 2006 7:30 pm
Forum: General
Topic: Hardware Needed For 2 x Full Route BGP
Replies: 7
Views: 2703

using mikrotik as bgp router... I wouldn't recommend it as for NOW..
by advantz
Sat Oct 21, 2006 3:11 am
Forum: Scripting
Topic: enhance this script
Replies: 5
Views: 2583

Re: enhance this script

hi guys This is my first script for fail-over with two load-balanced line and third backup sleeping line. can you take a look and think of how can enhance it? or maybe you can use it if you need. scheduler: / system scheduler add name="ping_google_link_A-up" on-event=schedule_A_up start-date=jan/01...
by advantz
Wed Oct 11, 2006 4:29 am
Forum: Wireless Networking
Topic: Power Problem over long CAT5
Replies: 21
Views: 5479

using cheap CAT5 cables may results poe problems....
by advantz
Wed Oct 11, 2006 4:26 am
Forum: General
Topic: 10000 users on the Forum
Replies: 5
Views: 2680

10000 is very big number....
by advantz
Tue Oct 03, 2006 7:38 pm
Forum: General
Topic: Overseas Traffic in 2.9.26
Replies: 29
Views: 8117

Could you paste the export from configuration (mangle, queues) ? I have tried it on my router, download and upload were limited. / ip firewall mangle add chain=prerouting action=mark-connection new-connection-mark=all-con passthrough=yes comment="ALL CON" disabled=no add chain=prerouting dst-addres...
by advantz
Tue Oct 03, 2006 7:11 pm
Forum: General
Topic: Overseas Traffic in 2.9.26
Replies: 29
Views: 8117

http://wiki.mikrotik.com/wiki/How_to_apply_different_limits_for_Local/Overseas_traffic already set 512k/512k but upstream got past 1M thank you sergejs This is example : Queue set 1M/1M traffic graph shows 1M for downstream and 0 for upstream... That's why I wanted simple queues feature that can use...
by advantz
Tue Oct 03, 2006 7:07 pm
Forum: General
Topic: 2.9.30 Break Download Queues and statistics?
Replies: 4
Views: 2212

simple queues is for ALL interface or Local interface
if you want to limit your customers

as far as I know
by advantz
Tue Oct 03, 2006 7:01 pm
Forum: General
Topic: Overseas Traffic in 2.9.26
Replies: 29
Views: 8117

Have you tried example from the Wiki ?
Note, to use Simple queue mark packets in the 'chain=prerouting'.
Yes, of course.
that mark is only for downstream only. upstream didn't work

some questions :
what is IN INTERFACE and OUT INTERFACE in mangle?
by advantz
Tue Oct 03, 2006 6:45 pm
Forum: General
Topic: Overseas Traffic in 2.9.26
Replies: 29
Views: 8117

/ queue tree add name="192.168.0.4DOWN U" parent=Local packet-mark="192.168.0.4 UU" \ limit-at=64000 queue=default priority=8 max-limit=128000 burst-limit=0 \ burst-threshold=0 burst-time=0s disabled=no add name="192.168.0.4UP U" parent=Local packet-mark="192.168.0.4 UU" \ limit-at=64000 queue=defa...
by advantz
Tue Oct 03, 2006 5:53 pm
Forum: General
Topic: Overseas Traffic in 2.9.26
Replies: 29
Views: 8117

is this mangle, mark packet both ways (up and down)?

Because I applied this sample, but marking didn't work for UPSTREAM in simple queues, traffic graph in simple queues for upstream is zero
by advantz
Thu Sep 14, 2006 3:41 pm
Forum: Wireless Networking
Topic: 33mbit Over 29KM @ 5.8ghz!
Replies: 26
Views: 3590

yeah! sorry my mistake, stupid old version lol!

cm9 default 18db
dlink 5213 default 17db
dlink 5413 default 17db
by advantz
Thu Sep 14, 2006 3:37 am
Forum: Wireless Networking
Topic: legacy drivers and wireless test drivers QUESTIONS
Replies: 2
Views: 776

legacy driver cannot detect newer card afaik
by advantz
Thu Sep 14, 2006 3:33 am
Forum: Wireless Networking
Topic: 33mbit Over 29KM @ 5.8ghz!
Replies: 26
Views: 3590

cm9 default tx-power is 27db~30db
by advantz
Wed Sep 13, 2006 2:24 am
Forum: Wireless Networking
Topic: can't turn on turbo on interface-type=Atheros AR5213
Replies: 18
Views: 3461

please turn on logging for cpe -> wireless, debug, info to disk
and what it says?

and what country your are?
try using manual tx-power and set the country for ap

and what brand for that ar5213 card??
by advantz
Tue Sep 12, 2006 5:16 pm
Forum: Wireless Networking
Topic: Lower Ping than 4-5 ms?
Replies: 3
Views: 1266

@fux
My first guess you are using nstreme feature?

You cannot get 1ms with that as far as I know in the world :P
by advantz
Tue Sep 12, 2006 5:12 pm
Forum: Wireless Networking
Topic: can't turn on turbo on interface-type=Atheros AR5213
Replies: 18
Views: 3461

your card has broken country code maybe (my first guess)

set your scan-list to whatever you are using in frequency

e.g : scan-list=5200 in both cpe/ap
(don't use default)

tips to get higher data rates
- no bridge
- no conntrack only for route
- route
by advantz
Mon Sep 11, 2006 2:56 am
Forum: General
Topic: incomplete function of TORCH
Replies: 8
Views: 3114

yeah torch cannot detect udp packet flood I guess.
by advantz
Fri Sep 08, 2006 5:52 pm
Forum: General
Topic: dst NAT simple problem !
Replies: 8
Views: 2411

@atila Is that dc++ hub and team speak just like bittorrent? what is dc++ and team speak? I guess your setup works fine If you need sampe for dst-nat : /ip firewall nat add chain=dstnat dst-address=10.0.10.74/32 to-addresses=192.168.2.200 to-ports=0-65535 action=dst-nat do you get /24 of public ip? ...
by advantz
Fri Sep 08, 2006 5:45 pm
Forum: Wireless Networking
Topic: How to flash mini-pci cards?
Replies: 4
Views: 1096

you need custom frequency license!!! Go purchase at mikrotik.com!! or wisp-router.com

hmm 2.5-2.7ghz use orinoco b/g pcmcia card
atheros 5212 I guess
by advantz
Fri Sep 08, 2006 5:43 pm
Forum: General
Topic: v2.9.30 come
Replies: 7
Views: 3713

Thank GOD :

*) added support for D-Link DGE-530T;

Waiting for this!!
since the card using marvel yukon chipset, but why mikrotik not support this card under v2.9.29???
by advantz
Tue Sep 05, 2006 4:22 am
Forum: Wireless Networking
Topic: What happened to the channels above 2.5Ghz?
Replies: 21
Views: 3862

orinoco's b/g pcmcia do support 2.4g - 2.7g
by advantz
Sat Aug 26, 2006 1:39 am
Forum: General
Topic: 2.9.29 Queues - Diff btwn Target Address and dst. address?
Replies: 2
Views: 1122

AFAIK

target-address is client-ip
dst-address is destination address that client going to
by advantz
Sat Aug 19, 2006 3:45 am
Forum: General
Topic: Bootloader and license problem
Replies: 5
Views: 2039

Same old problem I had once in the past :D
by advantz
Sat Aug 19, 2006 3:41 am
Forum: General
Topic: Bandwidth limit to a group of IPs. Is it possible?
Replies: 16
Views: 6937

It can be done with mangle + address list + queue tree

That's why I requested simple queue that can use "address-list" feature to
simplified this...
because with mangle only mark one way e.g. upstream or downstream, you need to mangle both ways
by advantz
Sat Aug 19, 2006 3:39 am
Forum: General
Topic: List your 5 favorite RouterOS Features
Replies: 9
Views: 1859

1. winbox
2. policy-routing
3. hierachial tree queue
4. firewall
5. advanced tools
by advantz
Sat Aug 19, 2006 3:34 am
Forum: Wireless Networking
Topic: Nstreme question: what latency at long range?
Replies: 10
Views: 2533

Glad to see everyone have nice results with nstreme, please post your frame size and/or policy.

thank you
by advantz
Sun Aug 13, 2006 5:50 am
Forum: Wireless Networking
Topic: DWL-AG530
Replies: 2
Views: 729

yes, it's 5213
by advantz
Sun Aug 13, 2006 5:44 am
Forum: Wireless Networking
Topic: Nstreme question: what latency at long range?
Replies: 10
Views: 2533

don't forget this is nstreme! :D

1ms I don't think so, with nstreme?
by advantz
Sun Aug 13, 2006 5:32 am
Forum: General
Topic: How to make reverse DNS
Replies: 2
Views: 3706

reverse dns needs to register through your RIR e.g : arin, ripe, apnic
before you can use it.
I don't think mikrotik support reverse dns?
use bind or other dns

it's per /24 for 000.000.000.in-addr.arpa.

000 is reversed ip address
by advantz
Fri Aug 04, 2006 7:28 pm
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

.28??

2.9.28??
Where is it?
by advantz
Wed Jul 26, 2006 7:20 pm
Forum: Wireless Networking
Topic: tx/rx signal strength is -89 -92 (Please help )
Replies: 32
Views: 11246

2.4ghz u need signal better than -70, and -50 is ideal
this is different from 5ghz signal strength -50 up to -80 still okay to pass through 6mbps data
by advantz
Thu Jul 20, 2006 6:56 am
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

advantz, mikrotik people must think before to give us some features... i`m realy disapointed from repeatin problems ... or fix something and crash something other ... Can i ask you to send to me conf files for quagga without you sensitive information. I have some PC here for testing purposes, and t...
by advantz
Mon Jul 17, 2006 12:33 am
Forum: General
Topic: Assign IP Public for client
Replies: 7
Views: 2247

With 2.8 I dont use NAT. Try my setting that I post be4.

Btw, thanks all
what is your goal for your setup?

is client a router or pc??
by advantz
Sun Jul 16, 2006 12:22 am
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

@heimdal
I'm moving to zebra 0.94 and stable and fast enough!! received prefix less than 10sec...

Why don't you guys use code from quagga/bird/openbgpd please...
It's under GPL/BSD license
I really love mikrotik...
by advantz
Sat Jul 15, 2006 1:58 am
Forum: General
Topic: Nehemiah 1 ghz mini itx w/ RouteOS ??
Replies: 6
Views: 1015

CPU and motherboard - advanced 4th generation (core frequency 100MHz or more), 5th generation (Intel Pentium, Cyrix 6X86, AMD K5 or comparable) or newer uniprocessor (multi-processor systems are not supported) Intel IA-32 (i386) compatible architecture with PCI local bus
by advantz
Tue Jul 11, 2006 3:46 pm
Forum: General
Topic: v2.9.27 released
Replies: 23
Views: 3737

Hi normis,
I already send supout.rif for 2.9.27 w/ routing-test
including syslog
please analyze that support out

thank you

PS : I want to try standard routing package from 2.8.28 where to get it??
by advantz
Tue Jul 11, 2006 2:27 pm
Forum: General
Topic: v2.9.27 released
Replies: 23
Views: 3737

need some info on BGP, still bugged?? thank you I think you should try it - you should help the Mikrotik support by revealing the bugs and testing the fixes. In other case you can wait for the completely debuged version forever. And, as we know, there is no such thing as "completely debuged version...
by advantz
Tue Jul 11, 2006 4:33 am
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

I already try 2.9.27 routing-test I got problem with ethernet, ping sometimes timeout to one of bgp peer ip, causing bgp hold timer to expire (I think!) And also routing table random bugged, e.g: state dst-address gateway distance interface Db 66.66.66.0/24 10.0.0.1 20 GW1 ADb 66.66.66.0/24 10.0.0.2...
by advantz
Sat Jul 08, 2006 3:15 pm
Forum: Wireless Networking
Topic: Large & a lot packets passing
Replies: 1
Views: 561

Large & a lot packets passing

How to handle a lot of packets and large. About ~3000 p/s I'm using nstreme @24mbps, bandwidth test for up and down about 10mbps and 10mbps for both up+down = 5mbps+5mbps using polling with best fit 3200 cpu resource at 100% using wrap 266mhz geode, CM9 both ends ping from bridge-client around 16-10...
by advantz
Sat Jul 08, 2006 11:54 am
Forum: Wireless Networking
Topic: wrap w/sr5 throughput
Replies: 12
Views: 2062

setssquare: so you think you are getting around 40-50mbit on wraps? so wraps can do this much when not generating the traffic as well as beaming it? Just messing around i've goteen 22-25 mbit between two wrap 2c 's @ 2.4 tks From my experience.... yes But remember I had no firewall or que rules and...
by advantz
Tue Jul 04, 2006 7:40 pm
Forum: General
Topic: v2.9.27 released
Replies: 23
Views: 3737

need some info on BGP, still bugged??
thank you
by advantz
Sat Jul 01, 2006 4:59 am
Forum: General
Topic: Simple Queue feature request
Replies: 1
Views: 1446

Simple Queue feature request

"simple queue dst-address" that can use "address-list" from "/ip firewall address-list"

mangle seems only mark one ways, had to do both ways, take a lot of time and lines for mangle rules

Thank your for considering this request
by advantz
Mon Jun 26, 2006 2:34 pm
Forum: General
Topic: Something Like This: QoS traffic control: (HAWKING HBB1)
Replies: 6
Views: 1074

"up to 400%" is relative statement after all.
by advantz
Mon Jun 26, 2006 5:57 am
Forum: General
Topic: Last Solid BGP/OSPF Release?
Replies: 1
Views: 667

the most stable working but still crashed bgp version : 2.9.24 w/ routing test
Thank You
by advantz
Sun Jun 25, 2006 4:25 am
Forum: General
Topic: RB500 AP slows down on load ....
Replies: 3
Views: 884

antenna-mode=ant-b <--- is this default settings??? I don't think so
by advantz
Sat Jun 24, 2006 3:16 am
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

@changeip
Same things happened with me, same logs, can't re-establish bgp if peers refreshes, etc. for 2.9.22-2.9.26 w/routing-test

Always sent supout.rif to mikrotik support, don't know if they actually find out something going on in that supout.rif?
I will sent bgp+debug log after bgp crashed.
thx
by advantz
Thu Jun 22, 2006 12:15 pm
Forum: General
Topic: Intel Cards PRO 1000MT on PCI-X Problem
Replies: 5
Views: 1372

Re: Intel Cards PRO 1000MT on PCI-X Problem

Just want to give heads up to users --> Let me explain to you the problem I see . I dont > know if its routing-test or routing but > I have ip 1.1.1.1 and 2.2.2.2 each talking to 2 peers > Suddenly i cant ping 1.1.1.1 and 2.2.2.2 > > both 1.1.1.1 and 2.2.2.2 are on Gige Intel Pro 1000/mt on PCI-X >...
by advantz
Thu Jun 22, 2006 12:13 pm
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

I'm using routing test for eBGP multihop, ospf, rip My system is : P4 2.66ghz dual core 2x512mb ddr2 intel 945gnt mobos 3x rtl8139c 1x e1000 1x dom 64mb Maybe this dual core problem with mikrotik? Mikrotik require bgp & debug log, I'll provide this log for 2.9.24 w/ routing test only. Don't want to ...
by advantz
Wed Jun 21, 2006 4:39 am
Forum: General
Topic: v2.9.26 released..
Replies: 25
Views: 4565

2.9.26 w/ routing test is fast but didn't work in my sytem, buggy,
having ethernet,bgp(still) problems with this version, going back to 2.9.24 w/ r-t

already sent supout.rif
by advantz
Tue Jun 20, 2006 1:46 pm
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

Send a support-output file to support@mikrotik.com
Yeah right, I already sent the supout.rif 2.9.26 w/r-t BGP problems
Thank You
by advantz
Sat Jun 17, 2006 12:38 am
Forum: General
Topic: Mikrotik support gateworks avila processor?
Replies: 1
Views: 708

Mikrotik support gateworks avila processor?

Want to know if mikrotik support gateworks avila network processor?
Anyone can confirm this?
Thank you
by advantz
Fri Jun 16, 2006 3:52 am
Forum: General
Topic: v2.9.26 released..
Replies: 25
Views: 4565

Re: kernel panic when upgrading from 2.9.25 to 2.9.26

Download Packages: routeros-x86 verify file sizes and descriptions. Upload to Router. Reboot Router Then: Loading System with Initrd Uncompressing linux.... Execve: 00000002 Kernel Panic: Attempted to Kill Init Does anyone have any ideas? How do I reinstall this without screwing up my license? Anyo...
by advantz
Thu Jun 15, 2006 8:12 pm
Forum: General
Topic: v2.9.26 released..
Replies: 25
Views: 4565

Re: v2.9.26 released..

What's new in 2.9.26: *) removed support for MMS connection tracking - it did not work as it should; *) fixed unsetting of ppp secret local and remote addresses; *) added ping option to ppp active sessions in WinBox; *) added total statistics for Torch in WinBox; *) fixed problem with static ARP en...
by advantz
Wed Jun 14, 2006 5:22 pm
Forum: General
Topic: How many writes to flash will kill it?
Replies: 36
Views: 16216

there are cf socket in rb500 right??
by advantz
Tue Jun 13, 2006 4:16 am
Forum: General
Topic: Routing-Test
Replies: 148
Views: 31066

i use package from topic - for last 12 hours everything is OK!!! 4 BGP sessions work great for now. Thanks from me for fix and for "network" command too. nikhill for testing purposes i have another one router with different hardware (intel motherboard, with intel network adapters, intel cpu - that ...
by advantz
Sat Jun 10, 2006 3:38 pm
Forum: General
Topic: 2 isp
Replies: 14
Views: 3153

where is nat code?

I assume you are using src-nat?
by advantz
Fri Jun 09, 2006 9:08 pm
Forum: General
Topic: Need help, willing to pay (Queue+Firewall setup in 2.9.24)
Replies: 2
Views: 707

This is user to user forum as mikrotik said earlier.
You can post your problem here, :D
by advantz
Fri Jun 09, 2006 3:07 pm
Forum: General
Topic: 2.9.25 and bgp
Replies: 7
Views: 1029

please test the new routing test package:
http://www.mikrotik.com/download/routin ... 25_new.zip
Thanks, but no thanks, I will give grzesjan to try it then, lol
I've done enough :P
by advantz
Fri Jun 09, 2006 1:47 pm
Forum: General
Topic: 2.9.25 and bgp
Replies: 7
Views: 1029

This is a user-to-user forum. If you wish to inform Mikrotik about a bug, please contact support@mikrotik.com with the supout.rif file from the latest version I wanted other users to be aware of the problem. Gregor That error log seems familiar for me, wait... where do I got that from.....hmmm kidd...
by advantz
Fri Jun 09, 2006 4:28 am
Forum: General
Topic: Bonding question
Replies: 2
Views: 865

both end must be linux/mikrotik
by advantz
Thu Jun 08, 2006 11:47 pm
Forum: General
Topic: BGP Stopped Routing : Cease
Replies: 52
Views: 7558

I can confirm what ysam said about bgp crashes. The log bellow show this. http://www.spirosco.awmn.net/tmp/log.gif This screenshot is from a routerboard532 wich have 2 bgp peers. One running Quagga (10.17.119.130) and the other running 2.9.24 routing-test (10.17.119.129). In routerboard i have 2.9....
by advantz
Thu Jun 08, 2006 11:42 pm
Forum: General
Topic: BGP Stopped Routing : Cease
Replies: 52
Views: 7558

@changeip
Ok it faster than before but it not stable enough

I will send supout.rif, but don't know what to write, since I got same problems after all. It constantly refresh it's peer. That's not good for us.

Thanks
by advantz
Thu Jun 08, 2006 11:17 am
Forum: General
Topic: Version 2.9.25 out
Replies: 28
Views: 4264

warning, a known issue:

Apparently, WinBox has problems in regard to BGP. You are advised to use console to configure BGP.
Is this already fixed in 2.9.25??
what do you mean? this comment is about 2.9.25, so fix can be in 2.9.26
So this is bgp issues or winbox issue?
by advantz
Thu Jun 08, 2006 12:56 am
Forum: General
Topic: Version 2.9.25 out
Replies: 28
Views: 4264

warning, a known issue:

Apparently, WinBox has problems in regard to BGP. You are advised to use console to configure BGP.
Is this already fixed in 2.9.25??
by advantz
Thu Jun 01, 2006 6:29 pm
Forum: General
Topic: Intel® PRO/1000 PT Dual Port Server Adapter ???
Replies: 6
Views: 1709

if mikrotik using e1000-4.3.15.tar.gz (kernel 2.2 & 2.4), then your card won't work if mikrotik using e1000-7.0.38.tar.gz (kernel 2.4 & 2.6), then I think your card might works fine http://downloadfinder.intel.com/scripts-df-external/Detail_Desc.aspx?strState=LIVE&ProductID=983&DwnldID=9180&lang=eng...
by advantz
Thu Jun 01, 2006 6:23 pm
Forum: General
Topic: BGP Stopped Routing : Cease
Replies: 52
Views: 7558

I think I got same problems with stephandm.
Restart bgp and viola it's working again!
by advantz
Wed May 31, 2006 5:24 pm
Forum: General
Topic: BGP Stopped Routing : Cease
Replies: 52
Views: 7558

Sorry OOT, WHERE do you get 2.9.93??

What is very advanced technology included in that version?

kidding! cheers!
by advantz
Tue May 30, 2006 8:20 am
Forum: General
Topic: Drop ALL P2P traffic
Replies: 4
Views: 1651

drop using
/ip firewall filter add chain=forward p2p=all-p2p src-address=0.0.0.0/0 action=drop
by advantz
Tue May 30, 2006 8:05 am
Forum: General
Topic: state of the latest BGP?
Replies: 9
Views: 1773

yeah, i thought so :D

cos I'm using pci riser card for 3 of the ethernet cards (I don't have low profile ethernet bracket), so It shares irq resourcess (irq 11)

Will try to change to intel cards then, thank you
by advantz
Tue May 30, 2006 8:03 am
Forum: General
Topic: Spliiting Local IX and International Traffic
Replies: 4
Views: 1281

unless your using bgp, you cannot split routes dynamically
by advantz
Mon May 29, 2006 11:59 pm
Forum: General
Topic: state of the latest BGP?
Replies: 9
Views: 1773

not stable in my case, isp end is cisco, running ebgp multihop my end is : 2.6ghz dual core intel 945g mobos 1gb ram 64mb ide flash 3x 10/100 rtl8139c 1x 10/100/1000 intel gbnic don't know if this hardware problem?? Interface facing to ISPs sometimes having timeout, that's why bgp peering with them ...
by advantz
Mon May 29, 2006 11:54 pm
Forum: General
Topic: Bandwidth Limiting and BGP
Replies: 3
Views: 1044

for 2.8 use queue tree + mangle

upgrade to 2.9.x for advanced features of queue simple
by advantz
Mon May 29, 2006 10:04 am
Forum: General
Topic: Does cf/dom/hdd affect mikrotik performace?
Replies: 2
Views: 823

Does cf/dom/hdd affect mikrotik performace?

Does cf/dom/hdd affect mikrotik performace?

I have experiments using mikrotik, cf/dom seems slower booting and performance, and slow for bgp-routing too.

I haven't tried with hdd for this.

Any experience?
by advantz
Mon May 29, 2006 10:01 am
Forum: General
Topic: change routeros SSH and WINBOX listen port
Replies: 3
Views: 1690

sorry oot

what is mac winbox port?
by advantz
Mon May 29, 2006 9:59 am
Forum: General
Topic: Do I make some wrong, or what ? (nervous)
Replies: 6
Views: 1259

where is 'interface' option in 'advanced' tab??
I can't find it lol

I usually use interface=all
by advantz
Mon May 29, 2006 9:57 am
Forum: General
Topic: considering purchasing a level 4 license .. quick question
Replies: 9
Views: 2344

when using cdinstall choose 'yes' when asked "keep old configuration"
by advantz
Mon May 29, 2006 9:35 am
Forum: General
Topic: Compaq NC3122 Dual Port 10/100 supported?
Replies: 0
Views: 676

Compaq NC3122 Dual Port 10/100 supported?

Need info if Compaq NC3122 Dual Port 10/100 works with mikrotik?

I see this card using intel chipsets

Thank you
by advantz
Wed May 24, 2006 2:04 pm
Forum: General
Topic: ip gateway hijacked
Replies: 10
Views: 1893

set reply-only for arp in /ip arp
that means static arp entries

cmiiw?
by advantz
Fri May 19, 2006 3:39 pm
Forum: General
Topic: RouterOS 2.9.24 is out
Replies: 33
Views: 7325

still no bgp fixes, damn :( whatd do you want fixed? bgp setup w/ routing-test won't work without redistribute connected, in version 2.8.28 w/ regular routing, filtering won't work correctly redistribute inject into bgp cause bgp origin=incomplete and sometimes routing table screwed! bgp can't see ...
by advantz
Fri May 19, 2006 3:31 pm
Forum: General
Topic: Winbox support for routing-test package
Replies: 25
Views: 4939

Re: BGP routing-test problem

So, i setting up one BGP link with routing test and saw what happened:

work only with "redistribute connected" - on mikrotik documentation for BGP command reference is connected and static... WHY ?
need some answer here please, same problem!
thanks
by advantz
Fri May 19, 2006 4:43 am
Forum: General
Topic: RouterOS 2.9.24 is out
Replies: 33
Views: 7325

*) added option to WinBox to not automatically open previous session windows
works only with v2.9.24;
how to open previous session then??

EDIT: nvm, there is an option, i dun see it, sorry :P
by advantz
Thu May 18, 2006 10:35 pm
Forum: General
Topic: RouterOS 2.9.24 is out
Replies: 33
Views: 7325

still no bgp fixes, damn :(
by advantz
Thu May 18, 2006 2:24 pm
Forum: Scripting
Topic: BGP to address-list script?
Replies: 8
Views: 2497

No, it will stop right the way after it found overlapping address/subnet, too bad isn't it :D

need address/subnet overwrite feature pls
by advantz
Thu May 18, 2006 4:58 am
Forum: Scripting
Topic: BGP to address-list script?
Replies: 8
Views: 2497

I mean, I receive bgp routes that have overlapping addresses or subnet, so it would impossible to run this script to address-list right?
e.g :

66.5.0.0/17
and
66.5.0.0/22
would be overlapping, cmiiw :D
I'm getting lots of these lines...

I there any other way? to bypass overlapping address-list?
by advantz
Mon May 15, 2006 12:06 am
Forum: Scripting
Topic: BGP to address-list script?
Replies: 8
Views: 2497

I already done that before, but how to "ignore" address overlaping in /ip firewall address-list??

if overlapping occures, then script will stop running any further!
by advantz
Sun May 14, 2006 8:12 pm
Forum: Scripting
Topic: BGP to address-list script?
Replies: 8
Views: 2497

BGP to address-list script?

Hi all,
I need to copy bgp prefix list that contains more than 180.000 prefixes to the /ip firewall address-list...

any of you guys have done this before?
thanks
by advantz
Wed May 10, 2006 6:55 pm
Forum: General
Topic: Routing Question
Replies: 4
Views: 880

eoip tunnel across wireless networks takes hell of ram usage... beware...
128mb aprox. 12 hours
by advantz
Mon May 08, 2006 8:24 am
Forum: General
Topic: connection bandwidth limiting
Replies: 8
Views: 2578

if you want to use mikrotik then a complex mangle setup using various command of /ip firewall mangle : list of mangle parameters : action dst-address new-connection-mark protocol address-list dst-address-list new-mss psd address-list-timeout dst-address-type new-packet-mark random chain dst-limit ne...
by advantz
Mon May 08, 2006 8:20 am
Forum: General
Topic: Noncontinuous netmask
Replies: 8
Views: 2968

try : /ip firewall address-list add list=net address=10.0.1.248/29 /ip firewall address-list add list=net address=10.0.2.248/29 /ip firewall address-list add list=net address=10.0.3.248/29 /ip firewall address-list add list=net address=10.0.4.248/29 /ip firewall address-list add list=net address=10....
by advantz
Mon May 08, 2006 8:10 am
Forum: General
Topic: 2 ISP in 1 LAN and policy routing
Replies: 4
Views: 1721

my thought of commands :
/ip firewall nat add chain=srcnat src-address=10.0.0.144/32 to-src-address=10.0.0.x action=src-nat

/ip firewall mangle add chain=prerouting src-address=10.0.0.144/32 action=mark-routing new-routing-mark=mt

/ip route add gateway=10.0.0.254 routing-mark=mt
by advantz
Mon May 08, 2006 8:02 am
Forum: General
Topic: OSPF takes much CPU resources
Replies: 1
Views: 746

OSPF takes much CPU resources

How much OSPF/RIP takes CPU resources??

I'm having difficulties setup RIP/OSPF using slow machines e.g 266mhz geode (wrap)
traffic goes down when RIP/OSPF updating the routes...

any solution besides static routing??

I'm using 2.9.23 test router w/ routing-test package
by advantz
Mon May 08, 2006 8:00 am
Forum: General
Topic: connection bandwidth limiting
Replies: 8
Views: 2578

you would want to setup squid proxy caching server as their feature can limit based on url or protocol, as well as time and day
by advantz
Mon May 08, 2006 7:58 am
Forum: General
Topic: 2 ports on the same subnet. Possible?
Replies: 5
Views: 1452

/interface bridge port
then
pr
then
set <number1,number2,..> bridge=<bridgeinterfacename>
by advantz
Thu Feb 23, 2006 4:48 pm
Forum: Wireless Networking
Topic: Atheros 5413
Replies: 16
Views: 6273

compex 5413 won't work on pc! (interface didn't show up on /inter wire)
but it will work using wrap + bios update.

here are the supout file for compex 5413 (wlp54g 3c) rev a1 pci adapter it's AG super XR 5006X / 5006XR
http://rapidshare.de/files/13984496/supout.rif.html
by advantz
Sun Jan 08, 2006 1:45 pm
Forum: General
Topic: Argh, MAC Address mangling / queue
Replies: 7
Views: 2271

try reply-only ARP!
by advantz
Mon Jan 02, 2006 7:56 am
Forum: General
Topic: public ip
Replies: 3
Views: 1512

/ip address add address=10.15.xx.xxx/30 interface=public
/ip address add address=85.30.xx.xxx/29 interface=private

gateway 10.15.xx.xx

that should work
by advantz
Mon Jan 02, 2006 7:48 am
Forum: General
Topic: How to defend from Doss Atack's
Replies: 5
Views: 1721

try blocking from your upstream provider :D
by advantz
Mon Jan 02, 2006 7:21 am
Forum: General
Topic: [req] feature regarding simple queues
Replies: 2
Views: 850

do you mean mangle - packet mark with passthrough? hmm that will work, but my request will be easier to manage simple queues :P btw thanks, i will try this and what chain to use? prerouting? I already try this, but didn't work, only rx traffic shown in queue simple / ip firewall mangle add chain=pre...
by advantz
Sun Jan 01, 2006 2:36 pm
Forum: General
Topic: [req] feature regarding simple queues
Replies: 2
Views: 850

[req] feature regarding simple queues

I need feature of simple queues that allow using /ip firewall address list as destination address

thanks guys
by advantz
Sun Jan 01, 2006 2:34 pm
Forum: General
Topic: webproxy
Replies: 3
Views: 1413

if using simple queue just cap public interface, target address=client ip
by advantz
Sat Dec 31, 2005 4:44 am
Forum: Wireless Networking
Topic: Using WDS to Bridge Wireless Interface
Replies: 38
Views: 10469

Mikrotik manual stated that station-wds can be bridged?? [admin@WDS_Station] > interface bridge [admin@WDS_Station] interface bridge> add [admin@WDS_Station] interface bridge> print Flags: X - disabled, R - running 0 R name="bridge1" mtu=1500 arp=enabled mac-address=11:05:00:00:02:00 stp=no priority...
by advantz
Thu Dec 29, 2005 1:57 pm
Forum: Wireless Networking
Topic: Suggestion wds, route, bridge for this wireless setup?
Replies: 0
Views: 828

Suggestion wds, route, bridge for this wireless setup?

I have wireless setup : http://img528.imageshack.us/img528/3720/graphicswirelessstationwds7br.th.jpg reason for this case : - wds_ap must use 1 antenna/wireless cards - wds_station1 (right picture) cannot see wds_station2 (left picture) - only wds_ap can see wds_station1 either wds_station2 because ...
by advantz
Mon Nov 21, 2005 7:55 pm
Forum: General
Topic: Limiting small packets
Replies: 4
Views: 1196

hi, lastguru
i'm having same problem here
single user can bypass simple queues, traffic is udp and network is masqueraded

simple queue on interface=all ; target address=customer ip

I believe that simple queue didn't shape udp traffic?
by advantz
Sat Nov 19, 2005 12:50 am
Forum: Wireless Networking
Topic: Verify Wireless Setup
Replies: 3
Views: 1596

set band=5ghz-turbo

normal/non-turbo client can't connect!
by advantz
Fri Nov 11, 2005 4:27 am
Forum: Wireless Networking
Topic: Extensive data loss
Replies: 17
Views: 13981

just put legacy wireless for prism cards, and new package for atheros, :D
works fine with atheros in my case :)
by advantz
Fri Nov 11, 2005 4:17 am
Forum: Wireless Networking
Topic: Problem With heavy download user
Replies: 3
Views: 1686

set higher supported rates for large data, help with pings

e.g.
1.5mbps up/down simultaneously required 9mbps link (5ghz) in my case
by advantz
Thu Nov 10, 2005 2:50 am
Forum: General
Topic: About bandwidth control yet: How interface have I use???
Replies: 6
Views: 1441

in simple queue if interface=all
max-limit=up/down
by advantz
Sat Aug 06, 2005 3:59 pm
Forum: Wireless Networking
Topic: Problems with Mikrotik base station 5 ghz
Replies: 4
Views: 2743

disable authenticate on interface properties.

lost node, excessive data retries
> I oftenly got this message, but change the frequency solved the problem :D (maybe interference with another AP)
by advantz
Sat Aug 06, 2005 3:53 pm
Forum: Wireless Networking
Topic: 54G wireless PCI Cards for RouterOs
Replies: 21
Views: 7580

linksys wmp55ag (a/b/g)
dlink ag520/ag530 (a/b/g)
planet wl-8310v1 (b/g)

already tested, and works fine :)
by advantz
Thu Jul 21, 2005 8:40 pm
Forum: Wireless Networking
Topic: WL-8310 problem
Replies: 5
Views: 2673

WL-8310 problem

Ok, I got this card, chipset is atheros 5213 (b/g) but wireless won't work

Planet WL-8310v2

Any chance you guys know what happened?

My friend has this card too WL-8310v1 b/g works fine, but extra-channels won't work

Thanks
by advantz
Wed Jul 13, 2005 3:16 pm
Forum: General
Topic: dynamic traffic shaping
Replies: 3
Views: 2363

kavakopoulos,
asm is referring mangle for nated network

for 384kbps and 5 users
in queue tree set limit-at=384*1024/5 max-limit=384*1024 for each user
by advantz
Tue Mar 29, 2005 1:39 pm
Forum: General
Topic: mikrotik-router and Dlink-router with connection problems
Replies: 15
Views: 4320

prism as ap, agere as client = best setup for 802.11b
by advantz
Tue Mar 08, 2005 4:34 pm
Forum: General
Topic: Sectored Base Station
Replies: 21
Views: 3520

Jrslick22

do you know where I can get upgrade firmware for senao to enable 14th channel?
thanks
by advantz
Tue Mar 08, 2005 4:22 pm
Forum: General
Topic: General overal wireless AP question
Replies: 3
Views: 1007

use different channel, same 2.4ghz itself gives self interference...
by advantz
Wed Feb 23, 2005 3:34 pm
Forum: General
Topic: New H/W B3 Dwl-g520 - Atheros acting strange!
Replies: 4
Views: 1248

try using wireless legacy. downgrade your wireless package to legacy i guess if you are using 2.8.22 or less

my mt box and 5213 works fine using 5,8ghz :)
by advantz
Tue Feb 22, 2005 2:30 pm
Forum: General
Topic: Really strange things
Replies: 2
Views: 1080

my guess is :

point-to-point = bridge <-> station

point-to-multipoint = ap-bridge <-> stations
by advantz
Mon Feb 07, 2005 9:33 am
Forum: General
Topic: Wavelan support?
Replies: 1
Views: 562

Wavelan support?

Does wavelan/agere cards support ap-bridging?
by advantz
Fri Nov 26, 2004 7:47 pm
Forum: General
Topic: Winbox using MAC?
Replies: 10
Views: 2223

Winbox using MAC?

Is there any features for this in the future?
great feature for me ^^
thanks
by advantz
Mon Nov 08, 2004 7:07 pm
Forum: General
Topic: scheduler can't work properly...
Replies: 2
Views: 858

2.8.17

OK, problem solved by changing TimeZone to +00:00
by advantz
Mon Nov 08, 2004 12:47 pm
Forum: General
Topic: scheduler can't work properly...
Replies: 2
Views: 858

scheduler can't work properly...

SYSTEM SCHEDULER : 0 pc2_start start_pc2 jan/01/1970 01:29:59 0s 0 1 pc2_stop stop_pc2 jan/01/1970 08:00:00 0s 0 SYSTEM CLOCK : time: 17:39:15 date: nov/08/2004 time-zone: +07:00 SYSTEM SCRIPT : 0 name="start_pc2" source="/queue tree set A max-limit=768000\r\n/queue tree set B max-limit=450000" own...
by advantz
Wed Sep 22, 2004 3:19 pm
Forum: General
Topic: routing question
Replies: 13
Views: 3836

You can start here : http://www.mikrotik.com/docs/ros/2.8/ho ... to.content


use dst-nat and src-nat to link public to local ones
by advantz
Mon Sep 20, 2004 7:08 pm
Forum: General
Topic: problem with vadem vg-469 ISA-PCMCIA adapter
Replies: 2
Views: 1303

If the card detected, then it will beep twice with same tones. But this time, it beep twice but the second beep with different tone, I assuming that the ISA-PCMCIA adapter won't work, since I use ricoh PCI-PCMCIA adapter that works fine (beep twice and I'm using it rite now)... because of that ricoh...
by advantz
Sun Sep 19, 2004 4:36 am
Forum: General
Topic: problem with vadem vg-469 ISA-PCMCIA adapter
Replies: 2
Views: 1303

problem with vadem vg-469 ISA-PCMCIA adapter

I have vadem vg-469 ISA-PCMCIA adapter with 2 pcmcia socket. but I can't find it working with Intersil Prism2 reference card 802.11b 200mW Driver shows : # Name IRQ IO ISDN... 0 Prism2 PCMCIA 1 Realtek8139 Interface > Prism shows : nothing But, RICOH PCMCIA-PCI Bridge with R5C475 II + Intersil Prism...
by advantz
Sun Sep 19, 2004 4:29 am
Forum: General
Topic: http proxy without disk-space
Replies: 3
Views: 1248

the cache using drive/cf/hdd not ram I guess
by advantz
Thu Sep 16, 2004 7:11 pm
Forum: General
Topic: http proxy without disk-space
Replies: 3
Views: 1248

I'm using "maximum cache size = none MB" settings on ip > web-proxy
works perfect for my networks

If u runs low on memory disable system logging
by advantz
Thu Sep 16, 2004 7:00 pm
Forum: General
Topic: HotSpot: Enabled-Address Bind IP to specific user
Replies: 3
Views: 1191

is that arp reply-only on eth interface will solve ip conflicts?

I oftenly got ip conflicts on my networks >.<
I'm now using arp 'enabled' + static arp
by advantz
Wed Sep 15, 2004 5:13 am
Forum: General
Topic: Disabling Client-to-Client Communication
Replies: 11
Views: 12460

how to disable client-client communication using layer3/4?
I mean firewall rules to set to disable the communication, e.g I want to disable client using network neighborhood/windows file sharing...

Is this mean I must disable port 137-139?

thanks
by advantz
Wed Aug 18, 2004 8:02 pm
Forum: General
Topic: how to use 4 wireless cards using same subnet
Replies: 3
Views: 1441

thank you last guru.

oh yeah,
ether1, prism1, prism2, prism3, prism4, bridge1
what interface to set ip?
thanks for help
by advantz
Wed Aug 18, 2004 11:20 am
Forum: General
Topic: how to use 4 wireless cards using same subnet
Replies: 3
Views: 1441

how to use 4 wireless cards using same subnet

wireless card 1 = prism2 = 192.168.0.10/24 = ap-bridge mode wireless card 2 = prism2 = 192.168.0.20/24 = ap-bridge mode wireless card 3 = prism2 = 192.168.0.30/24 = ap-bridge mode wireless card 4 = prism2 = 192.168.0.40/24 = ap-bridge mode lan card 1 = rtl8139 = 192.168.0.1/24 how to do this? just l...
by advantz
Fri Aug 06, 2004 1:40 pm
Forum: General
Topic: I hate to say it, But I need some help with Queues ;)
Replies: 11
Views: 3897

Ok, I've migrated all queues from simple to tree :D

and hell yeah it take a long time for me to find out the hierarchi queue tree :D
cos mangle-ing is so complicated, I'm working full nat system :(
by advantz
Fri Aug 06, 2004 6:25 am
Forum: General
Topic: I hate to say it, But I need some help with Queues ;)
Replies: 11
Views: 3897

wow after implement what dave says....
my router box works great....

I use combined queue tree and simple queues
to control bandwidth...
e.g. 256kbps using queue simple for pipe bandwitdh
and 128kbps using mangle/queue tree for international traffic :D
by advantz
Thu Aug 05, 2004 4:49 pm
Forum: General
Topic: 2.9 Beta 1 - Bug Report
Replies: 6
Views: 2517

after switch back to 2.8.10 i still got :

L 99 99 99 99 99 99 99
(after reinstalling many2 times still got same messages)

that makes me to lost license because i thought the hdd drive was broken :(
by advantz
Wed Aug 04, 2004 4:57 am
Forum: General
Topic: 2.9 Beta 1 - Bug Report
Replies: 6
Views: 2517

yeah i'm having that problem too

L 99 99 99 99 99 99 99 bla2

even with 2.9b2 cannot mount /dev/boot :(
so i can't use any 2.9 versions on my pc...
better switch back to 2.8.x

i dun know if i can upgrade to 2.9 in the future, anyone works well with 2.9beta?
by advantz
Thu Jul 08, 2004 4:28 am
Forum: General
Topic: Is that possible to use "simple queues tree"?
Replies: 1
Views: 1286

Is that possible to use "simple queues tree"?

traffic shapper using queue tree without mangle,
that works like simple queues?

I'm too stupid to use mangle/queue tree.... >.<
It doesn't work for me all the time...... poor me...
by advantz
Thu Jul 08, 2004 4:22 am
Forum: General
Topic: ip status invalid in arp dir
Replies: 1
Views: 1297

wrong interface?