MikroTik

zyzelis

+1000 for MC-LAG

zyzelis

Hi, you should select proper kernel version for CHR on esxi - 3.x disabled hyperthreading and adjusted CHR's to use 16 vCPU and re-ran the same tests. the results are below. In my lab testing i've found hyperthreading to be a benefit even though i've read multiple posts saying to disable it. Obvious...

zyzelis

"My router reboots" is a very generic problem, all kinds of issues are gathered in that topic.

Normis, are you work for ubnt?

zyzelis

For sure all of us want to schedule upgrading routerOS at a low usage time... And upgrade routerboot also...

+1
I think it's must have feature. Who wants the interruption of service and who wants to wake up at 3:00 ?
and yes +1 for routerboot upgrade

zyzelis

Hello, The same thing happens to Kayu. Since I upgraded to v6.42.7 I can not access the routers, it indicates an incorrect username or password ... I think the problem is for the admin user ... in some routers I only had this user configured and now I can not enter Mikrotik any solution? Thanks in ...

zyzelis

Already possible with RADIUS server.

Yes i know that.
But to keep radius only for option82 not very smart. isn't?

zyzelis

Dear Mikrotik stuff,
please add dhcp option82 to dhcp server

zyzelis

Since rain or other obstacles can cause the 60 GHz link to drop completely, I'm investigating whether to run a 5 GHz link also for redundancy. Failure should be ideally detected within a second and traffic transparently routed to the 5 GHz link until the 60 GHz link is back online. Both sides of th...

zyzelis

I know Dude has one option to mass upgrade RouterOS version, but this upgrade it's done uploading the npk files from the Dude Box to each RouterOS device. Why not add one option to use remotely the auto-upgrade option RouterOS has? This it's done in System/Packages/Check for Updates or in the Quick...

zyzelis

deleted

zyzelis

deleted

zyzelis

deleted

zyzelis

Version 6.43rc32 has been released. *) dude - fixed client auto upgrade (broken since 6.43rc17); still need to upgrade dude client manually. Client crashes after each upgrade via client ui Thank you for a report, but can you please confirm that your Dude client (executed with the administrator righ...

zyzelis

Version 6.43rc32 has been released.

*) dude - fixed client auto upgrade (broken since 6.43rc17);

still need to upgrade dude client manually. Client crashes after each upgrade via client ui

zyzelis

I reset it and now it works... weird because the password is saved as a favorite in winbox so I wasn't typing anything wrong earlier... and right before the update I used the same favorite to login to it and update it! i have observed this weird issue with password in earlier rc. i just changed pas...

zyzelis

I upgraded to 6.43rc32 and even using winbox 3.15 login fails!

look for problem on your network, for me works fine.

zyzelis

signal: 80 rssi: -61 tx-sector: 15 tx-sector-info: right 1.4 degrees, down 1 degrees rx-sector: 96 Would be nice to get some better explanation on these data (I am not talking the values!) Yes, that would be good, because now i guess. Mikrotik Team, please add to wiki the meaning of values and max ...

zyzelis

water on radome cover will affect link quality a lot more than water covering parabolic dish. PTMP improvements will be added in upcoming versions. Hello, we have a test LHG ptp link 850m and it's light rain now and i don't see rain impact, data like in sunny day, see data below interface w60g moni...

zyzelis

Does rc23 fix the w60g issues seen in rc19 and rc21?

seems, not. rc23 even worse for LHG. alot disconnects (~50/hour). after roll back to 6.42.3 - rockstable.

zyzelis

Add dark mode please

Sent from my C6833 using Tapatalk

+1 for dark mode. Its very useful when you are on site and laptop batery is <50%

zyzelis

@Xymox, what have we (forum users) done to you? Please stop flooding forum with useless texts. if you have to say something ugly to mikrotik staff, please write directly to support, not here. What a mess. First I connected via serial. Then I reformatted my NAND. So I Netinstalled 6.41.4 as to me tha...

zyzelis

Включал ли ты IGMP Snooping на бридже?Так же в IGMP Proxy можно включить в Settings Quick Leave если много клиентов смотрит. hAP lite - держит дома нормально через PPOE+dhcp clie eth1-3-10mb трафика IPTV + остальное.Работает как при Fasttrack так и без него. Сори если не смог помочь RouteOS 6.41.3 ...

zyzelis

I think we can safely assume that v7 is some way off, with Mikrotik staying tight lipped on a release date. Indicating that they themselves have no idea of when it is going to be released. We are getting to the stage where we are outgrowing our Cloud Core routers, yet we’re only doing 10-100Mb of t...

zyzelis

Basically you have to choose between using an external DHCP server or use the MikroTik DHCP server with an external RADIUS server. That options are clear for me. Just i thought, maybe someone tried for example to create lease with mac address ant after that to manipulate with script to remove mac, ...

zyzelis

Hello guys, I am trying to make work mikrotik dhcp server with option82 The network layout: 1. Mikrotik CCR (ros 37.1) as dhcp server. 2. As DHCP relay works ZTE GPON C300 OLT+ F601 ONU Option82 is configured and working. 3. As DHCP client – Mikrotik (hap) ros 39.2 Desired result – To Get client IP ...

zyzelis

IF mikrotik guys are working with dhcp part of ROS, its time to answer - when mikrotik will implement dhcp option 82? Actually is interested lease issue by circuit-id. we've been using this since 2008 :) you just need external RADIUS :D Hi chupaka, i have read your posts in forum acc to radius.:) C...

zyzelis

IF mikrotik guys are working with dhcp part of ROS, its time to answer - when mikrotik will implement dhcp option 82?
Actually is interested lease issue by circuit-id.
Mikrotik stuff, c'mon you did half of work, go on and finish.

zyzelis

Just tried RB2011 upgrade from 6.37.2 to 6.38.rc52. Router did not returned after upgrade. After visual inspection is clear that system is in boot loop (on startup are lighting up 3 port leds and after 3s everything goes down). At the boot the LCD display shows, that system is loading kernel, then i...

zyzelis

Today another CCR 1036-12G-4S died. The first 2 had warm environments and died after 1,5 years. This had good conditions and run 3 years. We have 1100AHx2 running forever in bad conditions. Seems CCR is not as robust? Probably only PSU? Mine died exactly after 3 years of running. But after psu chan...

zyzelis

in VLAN section change vlan mode from "optional" to "strict" for port5.
and in egress section set "leave as is" for 5 port
It should work as expected

zyzelis

Small off-topic: isn't it time to protect port 53 DDOS for WAN interface in the default rule set ?

Why offtopic? it should be "must-have" feature ASAP.

+1 for this suggestion

zyzelis

SwOS version 1.15 released http://www.mikrotik.com/download What's new in 1.15: *) name can be assigned to each port; unfortunately i can't check this feature, because after upgrade i am not able to connect to 260GS via web interface, the browser just gets the "download" file Now, after p...

zyzelis

SwOS version 1.15 released
http://www.mikrotik.com/download
What's new in 1.15:

*) name can be assigned to each port;

unfortunately i can't check this feature, because after upgrade i am not able to connect to 260GS via web interface, the browser just gets the "download" file

zyzelis

I have recently received a shiny new RB260GS which is being powered over PoE. However I am only able to get, at best, 83Mbps through it. I have three vlans setup on it. Does anyone know why I would bet getting such low speeds from a GBe switch and what I could change? Post here printscreen with &qu...

zyzelis

Hi Guys, i'am from berlin and i have a problem with 2 SXT ac Wireless stations. The Wireless bridge is connected with a distance round about 1500 meters. I have a Signal Strength of -48/-48 and a TX/RX Rate of 585-866 Mbps (normally 80Mhz/2S) The real bandwith going through the Bridge is just nearl...

zyzelis

It seems i have similar network, and i can share my experience with issues

zyzelis

Hello, how to block roque DHCP-servers

http://www.wirelessinfo.be/index.php/mi ... hcp-alerte
I know how detect them but i want to block them.

Anybody can help me?

Draw your network layout and put here.

zyzelis

Hello. We've experienced that from last year, the AC-DC adapters that came with SXT Lite 5 (EU version) have much lower quality. We replace about 10-15 each month. Customer calls because has no service. SXT is disconnected from Wireless Network, and Ethernet interface is connecting and disconnectin...

zyzelis

Hello Folks! Today we upgraded to RoS 6.31 and wireless-cm2. All our links now is rock solid Tx 300/Rx 300 and CCQ is 99-100% at all times for our N clients, yet we do not have any AC clients, my distributor tell me that AC is for the time being mainly for links, AC PTMP is not yet fully developed....

zyzelis

oh thanks zyzelis but if you don't know how to answer its good if just do like the other don't answer also not all smart like you they can do it from the first time if you have the answer that will be good if you don't have it just pass the post and don't say anything may be yo will see something n...

zyzelis

WOWO 51 visit and no one know what i am ask

you should read manuals, test and if something will go wrong ask here in forum.
Its not school, and we are not teachers. Use your own brain.

zyzelis

Running 1.14. Due to the VLAN configuration of these switches being.... unique, I'm having a hard time getting a VLAN to work properly. VLAN 1 should be untagged everywhere. VLAN 12 should be tagged on ports 1 and 4. The other VLANs are irrelevant at this time. What's wrong in my configuration? wel...

zyzelis

@WirelessRudy
I checked important network nodes and:
AP's - 433GL+52Hn, SXT's SA/ac, OmniTiks,
Routers - CCR1036, 2011, 750G
Switches - 2011,750UP
All devices are up since upgrade. No abnormal CPU consumption, no unexpected reboot,no unexpected link downs,
No wireless degradation
Nice

zyzelis

How is the uptime now for your devices? 1-2 days (since release). the most important was CCR. Now, im glad that it works without any issues, because before i had problem with bug in queue trees, which stopped accidently traffic shaping with versions >6.19. Can you give us an update on the status la...

zyzelis

Hello, Yesterday upgraded whole network to 6.30 from different versions (mainly from 6.27). devices upgraded(~200 devices): CCR, sxt, sxt-ac, 433, 2011,951,711,750 and omnitiks. Upgrade process was clean, without surprises and all devices went back without any issues. Services used: bpg, routing ,fi...

zyzelis

Hello, I have been working with mikrotik for more than 2 years. I am playing with mikrotik radios but i want to see a fair comparison. Which mikrotik AP can be compare with which Ubiquiti AP. Mikrotik SXT 5Hpnd VS Ubiquiti ? Mikrotik ? VS Ubiquiti Nano Bridge? Mikrotik ? VS Ubiquiti Nano loco Mikro...

zyzelis

According to my experience, short answer - no. I had even shorter distance ~45m and only two devices tried to power on with powerbox: groove and sxt lite. No success to power them with 1m patch cable, together or separate. Succeeded with powerbox only like regular poe device. What a shame. After th...

zyzelis

hellow Is this plan possible? http://line24.net/temp/p.jpg According to my experience, short answer - no. I had even shorter distance ~45m and only two devices tried to power on with powerbox: groove and sxt lite. No success to power them with 1m patch cable, together or separate. Succeeded with po...

zyzelis

Your Ros too old, upgrade to the latest at first

Next, your TX/RX CCQ... try to play with TX on both sites signal level and observe how CCQ is changing.

And the frequency scan is good option before setup a link.

zyzelis

There's nothing wrong with running SIP over NAT if you know what you're doing. It's a pain in the ass, don't get me wrong on that. But it's perfectly doable. I run hundreds of VOIP users over different NATs from different providers over different technologies. ALL work flawlessly... Except when I p...

zyzelis

Pwm is not needed. 3 pin is enough to maintain the rotation speed of 500-1000 rpm! but why coolers do not reduce the speed below 3000 - question to developers. And i am still interested in the expansion in the number coolers - why need an extra unused connectors and how to properly commutate 2 cool...

zyzelis

Just drop packets in filter forward chain.

zyzelis

Queue Tree queues does not work in 6.27 (all counters stays on 0) (at least for GRE tunnel interfaces)
Very poor performance for single TCP flow over GRE tunnel.

If queue type is "default" Try to change default queue type to another eg from pfifo to RED. and write here if it helps.

zyzelis

Upgraded a few CCR1036-12G-4S to 6.27 and have seen BPG become very unstable, connected to 4 peers, session connects fine then randomly drops all peer sessions and reset between 4 hours and 10 mins. Not sure what the cause is, nothing errors or looks incorrect, downgraded to 6.26 and BGP is stable ...

zyzelis

I also posted all the details in this serverfault link. http://serverfault.com/questions/661693/routing-issue-cant-ping-gateway-from-other-routers-in-full-mesh Basically I have 4 mikrotik routers set up in a full mesh, with OSPF, MPLS, and iBGP between them. Everything works fine internally. But al...

zyzelis

you are brave gui, if trying to feed 10mbit/s to 40 clients. i think max clients in your situation is 20 with 40Mhz channel

zyzelis

+2 it will be very usefull

zyzelis

Hello guys,
This morning i had (due to ntp vulnerability and TX errors) to upgrade CCR-1036-4s from 6.19(stable for me) to 6.24.
The roles: few vlans, dhcp, dns servers, nat. few firewall rules, queues. So far so good.
PS. No tx errors and drops

zyzelis

Orangetek,
where you did find PERIODIC CALIBRATION ?

zyzelis

I changed to nv2 and 802.11 and the speed is lower, and either is CCQ. :( I switched frequencies during the night and I found a good 80MHz channel in AC. Speed is about 220Mbps both on upload and download, which is very good, using nstreme. Using nv2 or 802.11 I can reach only 95Mbps using nv2 and ...

zyzelis

So my question is simple, what is the output of the switch when it is powered via POE? how many devices can I power?

At least 4

.

without ironic, Mtik declare, 0,5A per port.

zyzelis

I changed to nv2 and 802.11 and the speed is lower, and either is CCQ. :( I switched frequencies during the night and I found a good 80MHz channel in AC. Speed is about 220Mbps both on upload and download, which is very good, using nstreme. Using nv2 or 802.11 I can reach only 95Mbps using nv2 and ...

zyzelis

Lupin. I am not sure if ac works with this set of wireless config: band=5ghz-onlyac channel-width=20/40mhz-Ce if you will change it to band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee what happens? Station connects to ap? what records appears in logs when station connecting to ap? And what reason is ...

zyzelis

Hello,
Hard to comment without seeing configs, but 70% probability, that you did config mistake.

Post /export verbose here without sensivity information

zyzelis

try to change to nv2 or 802.11 and you will see why

zyzelis

My 5 cents. i am using 4x devices (to cover 360deg) on one tower about a year. with ros 6.11-6.17 the crashes was often, now with 6.19 results are good (no crashes about 1 month). These devices are good if clients are located 1-2,5 km from AP and signal is between -50....-65. The throughput .... whe...

zyzelis

in my experience with AC, low throughput is the result of not clean frequency channel.
try to scan air and change to free channel. or even better to set to superchannel and go to ~5900

zyzelis

Results not impressed. maybe too high signal?

zyzelis

Take a look to wds ptp bridge with L3 AP (sxt 5nd) side: # nov/07/2014 12:43:31 by RouterOS 6.19 # /interface wireless security-profiles set [ find default=yes ] authentication-types="" eap-methods=passthrough \ group-ciphers=aes-ccm group-key-update=5m interim-update=0s \ management-prote...

zyzelis

[admin@M2] > export # jan/02/1970 00:06:47 by RouterOS 6.20 # /interface bridge add name=bridge1 /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n country=poland disabled=no l2mtu=2290 mode=station-bridge ssid=MikroTik wireless-protocol=nv2-nstreme-802.11 /interface wireless securit...

zyzelis

Quick set does not change anything, still "0bps" on "Tx Rate" port ether1 in Torch tool.

what option did you use? ptp-bridge ? if yes,
post here both devices configuration

zyzelis

Why you are not using quickset?
its quite easy if you want to create transparent ptp bridge.
But before reset to defaults both units

zyzelis

On client side in wireless section change mode to station-wds.
In wds section change wds-mode to dynamic.
use nv2

zyzelis

is there any known way to get desired effect?

drop torrents at all??

+1 i would to know

zyzelis

What you said is definitely bad - or my description was not too good: "with high pps and not high bandwidth" Try to research torrent client behavior with packet sniffer and you will see, that it receives data with large packetsize. Connlimit isnt bad to limit connections but you wont get ...

zyzelis

Hello,
if you are using mikrotiks on client side, then configure these as routers and add simple queues.
so you will limit max throughput on client side. This is most effective solution.

zyzelis

Well

Then you must try it
fp wireless with fast path enabled.

zyzelis

But id you read de changelog, they have lade some nv2/wireless changes. But is it fixes from ros5.x or are they new bugs that comes whit ros 6.x ? Probably one thing you must keep in mind: They changed something with RSTP (and till now undocumented). So bridges sometimes hangs with enabled RSTp Des...

zyzelis

Upgrade to 6.19 (seems to be stable for nv2)
and try to play with frequency

I have 13km ptp link (5g/nv2/wds) CCQ is 100/95 and real throughput is about 100M halfduplex

zyzelis

Is it possible to use a Pc/Router with wireless card and use it as basestation?

Sure

zyzelis

Jacekes,
I would disagree with you. Mikrotik 433AH can handle 500 or even 1000 concurrent users.

Nikita,
please try to experiment and write here your experience.
We would welcome your posts about it.

What a wave of trollls here?

Its a generation attribute? or what?

zyzelis

Why you so nervous?
Don't you know about Mtik point of view to customers?
eg. I just replaced 260GSP's with poe injectors and non poe switch, and now no issues

zyzelis

Manyx,
Try to change channel width to 20Mhz with NV2

zyzelis

are you dumb?
why you not uploading some porno picture with ask to help???????
if you arent troll, then post your, network layout, config and write down what documents you read before.....

zyzelis

That's really interesting

So after soldering issue gone?

zyzelis

SXT will not work on 14km.
try netmetals +30dbi antennas.
I am not sure if it is possible to reach 3464Mbit over wireless (866 - its a modulation, not throughput)
IMO, best what you can expect with 1 ac link is 200Mbit/s

zyzelis

zyzelis , what exact changes do you want to see for wireless? Sergejs, in changelog no word about wireless section, meanwile we know, that at least 6.20rc15 you have changed wireless to good side. I thought, that changelog is for registering what was done with firmware(OS) and for customers, who ha...

zyzelis

What's new in 6.20 (2014-Oct-01 10:06): *) cert scep - use fingerprints for transaction ids; *) ipsec - support fqdn as my id; *) fetch - allow fetching files larger than 4G; *) fetch - fixed problem where files fetched over https were trimmed in size; *) fixed problem - it was not possible to see ...

zyzelis

At first i would upgrade to the latest rc. next i would reset configuration to default on both devices. (because client cpu-frequency: 500MHz) as i understand the 10.x adresses is for communication between sxt via wireless? where are located both devices? (distance) environment is noisy? Then use AC...

zyzelis

Hi, I to have same/similar problem. Kernel failure - **AP and Client SUPPORT.inf files attached** Using SXT G-5HPacD sectorial to one client using SXT G-5HPacD. switched to 802.11n - no success switched to 2omhz channels - this ACTUALLY CAUSED kernel failure 100 metres distance checked radio noise ...

zyzelis

Hello, i have working SXT-acSA -- SXTac link quite good. Not as promised in advertisement, but much better than regular sxt. with v620.rc15 link is stable ~6 days, without kernel errors and wireless disconnects. So, maybe you have configured your devices in the way, which leads to kernel crashes. If...

zyzelis

Now I run into a MPLS Problem with v6.19. After a connected bridge was updated/rebooted the bridged network (even MPLS routers own address) is no longer reachable from our network. The route distributes in ospf and LDP but packets do not get through. I cant repair it be disabling enabling the inter...

zyzelis

Well, then remove this list.
Because on mikrotik site things which are not maintained by mikrotik, at least looks strange.
It's on the Wiki. Why is that strange?

Can you edit this topic on the wiki?

zyzelis

This list is not maintained by Mikrotik, we do not test all available motherboards for compatibility.

Well, then remove this list.
Because on mikrotik site things which are not maintained by mikrotik, at least looks strange.

Or move it here.

zyzelis

hi every one ...i have the sextant type g http://routerboard.com/RBSEXTANTG5HPnD i thing it have a proplem ...the sextant disconnect = the lan stope working it does not work again unless i reset it it works for somedays and the the lan stop again and so on ...anyone help me [sarcasm] did you plugge...

zyzelis

what about 5.8 ghz i am using SXT-SA at base station and STX lite at customer end and getting signal of -88 !! And? what about? We are using SXT SA as ap and lite5 as cpe. After upgrade to v6.19, this combination beats up ubnt equipment at short distances. Of course answer to WirelessRudy questions...

zyzelis

Maybe he wants to say GSM base antennas... Exactly GSM :), As we know, mobile operators starting to use 3G (UMTS@2,1Ghz) and 4G@2,6Ghz band, On one tower,with colocation with GSM provider i had to remove 2,4 AP, because its RX signal suddenly droped to -81. I changed AP to another, with Lite2 moved...

zyzelis

No one sentence about wireless improvenments, so it means - no improvenments in this package?

zyzelis

Hello CCR users, can you share info about CCr's sfp leds. they are working? if yes, which ROS you are using, if not, do you remember: it was turned off manually or automatically after upgrade. Eg. i started to use CCR1036 with ROS 6.3, all leds was up (bright orange), after upgrade 6.3->6.12 all led...

zyzelis

I just received my first Netmetal5 pair and realized I accidentally ordered the 3 chain version. Is anyone doing this yet? Does the bandwidth go up with that 3rd chain? Triple Polarity dishes are expensive. I could try 2 dishes with one being a slant polarized but this seems messy. If I decide to u...

zyzelis

2452 channel 9

Is the device installed near mobile basestation antennas?

zyzelis

Hello please have a look at the attached screenshot check the signal to noise and tx/rx rate i am getting higher tx/rx where SNR is low and tx/rx is low where SNR is high most of the time i am not able to ping ping form customer end to the AP after i disable some customers form registrations table ...

zyzelis

[/quote]
No, we dont use WDS mode any longer, We do use AP Bridge and Station bridge, and than adding interfaces to appropriate bridge[/quote]

Thats interesting. what frequency mode you are using?
Could you change nv2 to nstreme? For me for now it helped.

zyzelis

Insider,
how you have configured devices? as wds?
if yes, did you added to bridge wlan interfaces on AP side?

Does pings jumping if pinging to remote sites?

zyzelis

[/quote]
I dont want only 100 users ... But 1000 in area of 150 meters .... !!![/quote]

as we all know from math that area is measured in square meters. But you giving to us length of line.
So the all client must fill in the line of 150 length ?

zyzelis

Hello, we made some fist tests with equipment with 802.11ac enabledin production sites in NV2 mode so we have AP withsome 5 clients.. Everything seems ok, but after some time there is some critical bug on Wireless to eth bridge. The client is hanged on AP all over, but datas are no passing bridge. ...

zyzelis

Tested 6.19 on SXT5G-HnD Link... but Throughput is very bad. Link is Only-N, 20/40 above, nv2 signal -40dB to -45dB on both chains. no wireles-fs enabled 6.19 winbox freeze ... try BTest and Throughput is 1-10mbps (WTF?) in 1TCP connection Downgrade to 6.18 Try Btest and Throughput si 70-80Mbps in ...

zyzelis

What NAT rule?

This rule

/ip firewall nat
add action=masquerade chain=srcnat out-interface=sfp1-wan src-address=\
10.0.0.0/8 to-addresses=MY_WAN_IP

in general this rule looks ok. but who knows.
remove src address and to-addresses

and if not helps, write here

zyzelis

Well, if 'wireless is your life' you'd better start reading and learning a bit about it. Your question is similar too; How many trucks are allowed on motorway? It all depends on simultaneous traffic demand versus amount of clients versus capacity of the radio network versus capacity of the radio ch...

zyzelis

No, my users connect to the access points (on the bridged network) using pppoe but on the gateway I'm not using it...

So the problem can be
a) with the nat rule
b) L2MTU size

try to lower l2mtu size to 1590

zyzelis

Do you use any tunnel protocol like pppoe for wan connection?

zyzelis

Hello, ----deleted,because changed state-------------- I can confirm, that port2 not operating normally. In my case port 2 is feeding 433GL. Link is not stable - when 433 brings on, link is 1000, after 1-2 minutes the state is changing to 100(on both ends). The consumption is ~3W. And seems when 433...

zyzelis

Hello,

Maybe the issue is here?:

set [ find default-name=sfp1 ] auto-negotiation=no comment="Fiber" \
l2mtu=9600 name=sfp1-wan

If ros is v.6.19, then set autonegotiation to yes

and why second route?
add distance=1 dst-address=MY_WAN_IP gateway=MY_GW_WAN_IP

zyzelis

It was early to be happy with 6.19.
On CCR1036 which is connected via SFP to RB260GSP now i regullary get FSC error on link.
Already tried to turn off autonegotiation and set to FDX 1G, problem still persist
Before CCR was on 6.12 and such problem wasn't......

So be carefull.

zyzelis

I'm more intrested in a entry model with 2 or more SFP modules... CloudRouterSwitch 109-8G-1S-2HnD-IN (8 Ethernet ports, one SFP port, built in 2GHz wireless AP) CloudRouterSwitch 112-8G-4S-IN (8 Ethernet ports, four SFP ports) Normis, when to expect switch with 4 SFP ports? What about it's p...

zyzelis

Just upgraded a whole network to v6.19. Devices are CCR1036, 1100AHx2, SXT lite5;lite2, SA5r2, G2HnD, G-5HPacD-SA, G-5HPacD, RB433GL, OmniTik-U and UPA, RB750GL, 750, 750UP, RB2011-LS;RM;UAS, RB951G;U, RB711-5h,RB911-5Hnd and grooves A52HN. works stable so far, no "kernel failure" crashes,...

zyzelis

Same problem.

zyzelis

I guess it happens very rarely. At least I am not the only one, because support suggested it could be hardware, but I doubt it - I have boards with hardware problems, but they just reboot and the message in log is only "reboot without proper shutdown". The most recent time i had "ker...

zyzelis

The best that I achieved is the last I posted. Around 300mbit/s : nv2, 80Mhz clear channel, almost everything else at default. I'm not making changes anymore to do tests because it is in production for a week. And how this link looks? No hangs? no drops? no siurprises? PS. Today i have tested anoth...

zyzelis

CyberTod,
any news about your test link?
maybe you found good working config?

zyzelis

In indoor conditions i've got fdx udp 200Mbits.
another test was to fdx 100Mbit udp internal test beetween devices and at the same time 25 MB torrent download.
sadly but for me tcp test was not sucseeded due to 1100AHx2 crashes.

zyzelis

I have tested link with 6.19rc13
nope, no changes, but there is surprise

after upgrade Somehow was created traffic, which flowing via bridge and wlan. It can be stopped only by disabling wlan
interface.

loop.png

Normis, it is related to 6.19rc bridge loop protection enchancements?

zyzelis

Now tests nv2@5960

freq usage - as usual - crashing device,
snapshot:

5960.freq.usage.png

Test results
TX

5960-nv2-send.png

RX

5960-nv2-receive.png

I have no tested both, because even rx receive not showing good results.

Now i am going to test 6.19rc

zyzelis

Results from tests nv@5620

TX

5620-nv2-send.png

RX

5620-nv2-receive.png

And both

5620-nv2-both.png

I just checked, that nv tdma timing was set to auto in both test situations

Conclusions - absolutely unusable link @5620Mhz

Next - nv2 test@ higer frequency

zyzelis

Nstreme@5620

TX:

5620-802.11-send.png

RX:

5620-nstreme-receive.png

And both:

5620-nstreme-both.png

All results was worse than 802.11

Next -> NV2@5620

zyzelis

all antennas have better performance in certain frequency. look at the antenna dbi/frequency chart the best gain is around 54xx http://i.mt.lv/routerboard/files/sxt-patterns.pdf Sorry Normis, Missing measuring unit on ordinate axis, so it can't be readable properly I was searched in broshures decla...

zyzelis

Here are tests for 5620Mhz@802.11 TX 5620-802.11-send.png RX 5620-802.11-receive.png And both 5620-802.11-both.100.100.png As you can see, test was unsuccessfull on 200/200 Mbits and even on 100/100 results was unacceptable. besides take a look to btest results and wireless card speed results. Bug? ...

zyzelis

Sorry CyberTod for occupied your post

Try to play around frequencies..

Next my post - tests on 5620/regulatory domain/lithuania
Z

zyzelis

Yep, signal on 4960Mhz dropped to ~62db 4960.png And as expected, btest shows worse results (with 802.11 protocol) 4960-btest.png So question is: its a bug in ROS, or Antenna gain limitation in given frequency? Probably another bug in ROS v6.18 if settings are superchannel/no_country_set/scan-list=4...

zyzelis

Next. Now i picked up standard conditions: frequency mode - regulatory domain country - Lithuania Band scan with scanner: rd-scanner.png frequency usage tool still crashing AP, but i got partial view: rd-freg.usage.png According to situation i selected 5620Mhz frequency. rd-5620.png VERY IMPORTANT N...

zyzelis

Ok, duplex 200/100.

802.11-both-200-100.png

Same story - btest not runs if pressed directly, without preparing with one way tests.
Probably needed some time for ROS to change Coding rates.

By the way, where is MCS rates in registration/signal tab? now only legacy A.

zyzelis

Next 802.11 tests on 5045 Mhz frequency

Transfer to station

802.11-send.png

Receiption from station

802.11-receive.png

And....
both 200/200Mbits

802.11-both-200-200.png

Quick note:
very stable one way throughput on both directions and unusable duplex.

Next - > 802.115045 duplex 200/100

zyzelis

zyzelis what are the conditions of the link?
CyberTod did you already install the 8km link ?

Normis what do you mean "conditions"?
i wrote abow 3 posts what are conditions...
Do you need some additional info?

zyzelis

Duplex 200/200 Mbits nstreme-both-200-200.png after crashes works, but poor and without response to pings from station Here is Duplex 200/100 Mbits nstreme-both-200-100.png Quick note: Only possible way to get results is before aplying "both" test, is to start one way tests (first receive ...

zyzelis

I have noticed, that there is no possibility to get 200Mbits full duplex from this link, so i have reduced rx rate to 100Mbit. nv2-both-200.100.png IMO there is problem with radio link, not cpu limitation. And what the hell? to what to believe when measuring cpu load ? tool profile, or to winbox res...

zyzelis

Tests for NV2 protocol
1a - protocol nv2

transfer to station

nv2-send.png

receiption from station

nv2-receive.png

Duplex rate to station

nv2-both-200.200.png

zyzelis

Hello, Bellow are my tests, done with 2 RB SXT G-5HPacD v6.18 with wireless-fp in ptp mode (configured via quickset as wds bridge) Devices are installed on towers (1 - 50 m height, other - 45m, perfect LOS, distance -between them 0,85 km) Tests was done from AP side, because it is connected via fibe...

zyzelis

Because the field is not big, so devices will work fine.
Try to install in the corners of one longer edge and aim them to the center of field.

And please post your test results here

zyzelis

Hi All, This is my first time designing wireless for the office. The usage is for Internet access only . Authentication will be just password and some encryption. The office size is 3 floors 600 square meters (each floor). I would like that people will move easily and stay connected. Total number o...

zyzelis

Hi, There are mainly laptops and mobile phones (dell, hp, samsung galaxy s, htc, tablets), now, arround 10. From time to time for short period of time some of the devices need faster transfer rate. Not all of them in the same time. The most accesible place where i can install an AP is arround at 10...

zyzelis

For first step You can use Groove A52Hn Hi, I can't find this model on the website. Can you please be more specific? or give me a link? Thanks in advance, Found this one: http://routerboard.com/RBGrooveA-52HPn But, How many do i need for that area? What antenna do i need? I would prefer to have as ...

zyzelis

For first step You can use Groove A52Hn

zyzelis

Hello, has anybody problem with nv2 and client freeze? We have problem to use nv2 on some our APs, bacause of client freeze. If we disable and enable wireless, client is suddenly ok. ROS v is 6.18, new wireless package enabled, ROS is the same on AP and client. If we use nstreme, no freezes at all,...

zyzelis

Hi all. Straight to the subject: We have several SXT 5HPnD devices and want to use tagged vlans for device management. Setup: 1. Bridge with all physical ifaces name="bridge-local" mtu=1500 l2mtu=1598 arp=enabled mac-address=D4:CA:6D:E7:18:5C protocol-mode=rstp priority=0x8000 auto-mac=ye...

zyzelis

What version did you try to netinstall? Same version you're currently on, or latest (1.13)?

sorry for delay, i've used 1.13 of course.
now it doesnt matter, the las unit was sent to RMA.

zyzelis

[quote="WirelessRudy"]Manual says; "source interface is not bridge port" amongst other conditions that has to be met.

this sentence confusing me too.
anyway. i noticed no changes if i use mikrotik recommendatoins to use fast path.

zyzelis

You are doing something wrong. i had 3 ptp ac configs: 802.11 nstreme nv2 the signal was set to -52/-55 The worst result was with 802.11 (internal test ~150/150 udp) strange, but for me the best was with nstreme: 50/50tcp ccr->stx(ac)-//-sxt(ac)-1100Ahx2 and at same time torrent download,when i get ...

zyzelis

bad Power supply? cable? rj-45 jacks?
did you tested them?

zyzelis

Hello all, This is my story: long time ago i was upgraded about 10 rb260gs'es to 1.10, because SFP autonegotiation issue after few days i noticed that all upgraded switches started hang up and only way was to power off/on cycle. after that i tried to downgrade them all to stable 1.9 even if swos had...

zyzelis

Hello all, In wireless-fp (ros6.15) package i have found command vlan-tag with 3 args: no-tag/use-service-tag/use-tag As usual, there is no description about vlan tagging in wireless on wiki.mikrotik.com Q1: maybe someone already has played with that feature. And what experience? Q2: (4 mtik team) h...

zyzelis

Nobody has any idea? BTW ethernet ports blinks for few seconds after resetting the board after that no activity and pc lan show only send bytes no received byte. anybody haven't faced that kindda problem?

did you connected to ether1 (1st port)?

zyzelis

Hello,
try to set lower tx power.

zyzelis

260GSP(i have 3 units with different roles) runs without issues for me about 2 weeks. Poe-out works fine, with vlans - no issues, SFP links automatically without any additional config. They arrived with swos 1.12. IMO these units are much beter than 260GS. So answer to your question - sure these uni...

zyzelis

This info about throughput degradation via AP in bridge mode is very important. We also noticed, that throughput via bridge (AP in ap-bridge mode) never reaches 25Mbit/s, although we have several customer connected to the same AP, consuming constantly 10mbit/s traffic. Maybe Mtik support staff could...

zyzelis

+1
Required info

zyzelis

Hello! Today first time powered on my new RB260GS, connected to web-gui, changed IP and password and upgraded swos from 1.9 to 1.10. Some time later, web-gui didn't response and switch didnt send packets. I rebooted him and packets start going, but I still could not connect to web-gui. After that I...

zyzelis

Is it possible no one can help me for my problem i Tried everything but its same ccq is not good but signal is good

see this pic

I hope it will help you... signal is good

zyzelis

Thank you for your reply can I ask you what is the highest throughput with nv2 that You have obtained and with which configuration?

thanks

Hello,
Can i ask you, which type of RB you have? Maybe it would help us to predict the highest throupghput with given hw

zyzelis

+1000 for poe SWITCH (router) with ROS functionality and with more than 5 ports. Just my 5 cents: 1. we need switches with 8,12 and 16 ports. More ports means redudancy if some port failure occurs (sometimes it happens:)). 2. we need full ROS switch functionality + vlan tagging. 3. 12 and 16 p switc...

zyzelis

Hi,
usable 1 dbm. plus you can add gain of antenna any value.

zyzelis

Hello!
I did upgrade to 6.9.
Is the upgrade to 3.12 will kill my omni? Yes/no ?
FW.png

noyo,
after upgrade both ros and bootloader, my Omnitiks still works:)
and im observing better nv2 behavior and less cpu usage, when opened winbox.

So it will not kill your omni

zyzelis

It would be very useful
+1

zyzelis

I update RB750G from 6.7 to 6.9 via system/package/check for updates - download & install router reboot but not start - also all Ethernet interface led not flashed i try repair it via netinstall - connect 1 eth on 750G to pc eth card push rest and start router - wait so long but act not flashed...

zyzelis

hi, thank you for the replies... i checked the tutorial by Greg and its fantastic... my question remains.... should we use one routerboard with 2 WLAN cards on each side?? or can we achieve the same using 4 SXT ( 2 on each side ) Hello, If enough 30/30Mbits capacity of link, better to use single un...

zyzelis

Hello Folks! Whole our environment is successfully upgraded to ros6.9, rb411, rb333, rb600, rb433,rb750, sxt, sextant, ccr, crs, rb2011. Many devices in two towns. All working normally, no problems at all. However we still do not have a working CRS with vlan:s and swicthes, it still leaks traffic. ...

zyzelis

ok,thanks:) give me to know. because currently CCR 1036-12-4 works with old stable 6.3:)
What functions it performs?

core router for 200 customers with traffic shaping, dhcp server, vlan internetworking, firewalling. works so far so good...

zyzelis

I have loaded my CCR and all looks well. I suspect the release of 6.9 is good judging by the lack of complaints on this thread Hi, This CCR is empty? in the lab? or it does some networking? Currently in the LAb. as from tomorrow it will be in production will keep you posted if any issues ok,thanks:...

zyzelis

I have loaded my CCR and all looks well. I suspect the release of 6.9 is good judging by the lack of complaints on this thread

Hi,
This CCR is empty? in the lab? or it does some networking?

zyzelis

What's new in 6.9 (2014-Jan-31 11:18): *) lcd - added option to change the color-scheme; *) updated bootloader firmware; *) ppp: fixed RADIUS accounting; *) ppp: fixed IPV6-Prefix assigning; *) ppp: fixed dial-on-demand; What's new in 6.8 (2014-Jan-29 15:52): *) bridge - default protocol-mode chang...

zyzelis

Hello,
what purpose for fdx link? speed, latency or just tick, that you have fdx?

zyzelis

Hi all! I have been reading and searching but just in case I woud like few pointers pl so I dont buy cat in the bag :) ! My ayes are stuck on RB1100ahx2 for core router for small wisp project! RB woud have to handle: - PPPoE max 200 conections with user-manager - Firewall - QoS - logging users acti...

zyzelis

[/quote] All devices have Netinstall only on the PoE port This is a tough philosophical question. See OmniTik is an AP, so it means Ether1 will be connected to your ISP (in most situations). This is why we call it "default configuraton", if your devices are mostly used in other ways, you c...

zyzelis

I have tested, OmniTik with 6.8 and RouterBOOT 3.11 can boot without pressing reset button only if excecuting command. /sys routerboard settings set force-backup-booter=yes Who can confirm this?? MT: what version remains on backup bootloader???? Yes, this will also work. OK(ey) I can confirm, that ...

zyzelis

I have tested,
OmniTik with 6.8 and RouterBOOT 3.11 can boot without pressing reset button only if excecuting command.
/sys routerboard settings set force-backup-booter=yes

Who can confirm this??

MT: what version remains on backup bootloader????

zyzelis

guys, please clarify, what happened? you upgraded to v6.8, then upgraded RouterBOOT to v3.11 and router is not booting anymore? Did Netinstall help? Yes Not booting, netinstall not works... Actually, when trying to netinstall Omnitik-Upa ether ports not blinking and device not shows in netinstall. ...

zyzelis

http://routerboard.com/RB912UAG-2HPnD - Max consumption 14W

or better is RB411UAHL - Power consumption 1,4W board only + R52n-M 1.95W = 3,35W

Hello,
readings from 750UP:
1.OmnitikU - 2,5W (AP-mode)
2. SXT-G 2Ghnd 2,7W (AP-mode)
3. NBM5-22 - 3,9W (wds-bridge)

zyzelis

affected CPE SXT (6. still crashing under load (10/10Mbit udp btest) after 10s
In V6.8 works fine. I tried BW test (10/10) 1minute. No crash

Seems hw fault, because other devices works as expected.

zyzelis

guys, please clarify, what happened? you upgraded to v6.8, then upgraded RouterBOOT to v3.11 and router is not booting anymore? Did Netinstall help? Yes Not booting, netinstall not works... Actually, when trying to netinstall Omnitik-Upa ether ports not blinking and device not shows in netinstall. ...

zyzelis

after updating Firmware 3.11 aren't loaded any more
it is checked on several RB751U-2HnD !!!!!!!!!!!!!!!!!!!!!!!!!

I can confirm, same hapens on Omnitik UPA.

zyzelis

After upgrade OmniTik-UPA to 6.8 and firmware to 3.11, it died, after inspection on the site, we found port flapping.

EDIT
OmniTik even not loading from nand. And ticking :)

2nd edit

affected CPE SXT (6.8) still crashing under load (10/10Mbit udp btest) after 10s

going to netinstall

zyzelis

Hello all, despite that NV2 was fixed in 6.8rc1, i would not recommend to use this release with SXT 5nd r2, because ether1 port flapping issue. Please clarify what port flapping issue you mean, include your ticket number so I can check status. Thanks labdien braliukai :) Ok. lets try ;) in short: a...

zyzelis

Hello all,
despite that NV2 was fixed in 6.8rc1, i would not recommend to use this release with SXT 5nd r2, because ether1 port flapping issue.

zyzelis

mietus, some possible nv2 lockups/crash are fixed and also speed for the 802.11n might be more stable.

And it seems with nv2 ping isnt jumping like before, now stable 3ms under 40/40mbit btest.

its better Mtik, now its really better

zyzelis

Hello,
try to decrease wireless tx power

zyzelis

zyzelis

Hello,
what devices are tagging into vlans your own network?

And can you ping gateways from router?

zyzelis

Hello all, Because CRS documentation lacks, so I am asking for help here. My needs at this moment are very simple: Traffic, wich comes from wireless routers (AP bridges) to CCR, must be divided to customers traffic (V3) and management traffic (V2). Also we need separate Vlan for CRS management. As i...

zyzelis

Hello,
It would be nice if mikrotik will make improovements to SXT G-2Hnd (rf shielding and 600Mhz CPU) and will release RBSXTG-2HPnD-SAr2.
When to expect release?

??

zyzelis

Hello, i can suggest rubytech FGS-2924R2,
works for me ~1 year.

zyzelis

Hello, i am afraid, but to give higher availability than 95% over wireless link is not possible. My thought is based on experience using of several wireless base stations. Sadly, but i am providing internet service, which is lower quality requirement than IPTV, i can't reach higher availability than...

zyzelis

Hello,
i am sorry, but this is not my promise

As usual Mtik are using guerrilla Marketing, so we should just wait.... a miracle, not alpha...

zyzelis

Hello,
if you have available simple 80cm SAT dish, just simple mount to it sxt 5G and you will have stable at least 10 km link with -55db signal
(believe me - i have tested and i have 24/7 working ptp link for 1 year)

zyzelis

after upgrade from rc13 no more connectivity via Vlan on RB1100AHx2 it is a shame that MT does not really test those releases !!! i would like to get some money for testing and wasting time with this buggy stuf ! it seems that Mikrotik OS gets worse from release to release sorry but i have enought ...

zyzelis

Hello,
try to remove wlan1 from bridge

zyzelis

yeah, this is the best topic!

zyzelis

Hello,
i had similar glitch with policy routing and dual wan with ROS 6.rc11.
The cure was to remove ALL existing mangle rules on the router and rewrite from scratch.

zyzelis

have you looked here?
http://wiki.mikrotik.com/wiki/Manual:Up ... to-upgrade

Janisk,
there isn't explanation about autoupgrade mirror...

zyzelis

It seems, one guy already have diagnosed tcp problem.
http://forum.mikrotik.com/viewtopic.php ... 50#p350398
Lets wait until mikrotik will read this post

zyzelis

Hello Honzam,
Maybe you should use Rocket M?

zyzelis

As always.....
So the decision is to wait better support from Mikrotik before buying wireless.
And please Normis don't waste your time and do not answer

Search found 213 matches