Meanwhile, Cisco dealing with its latest security vulnerabilities https://twitter.com/RedTeamPT/status/11 ... 6657238016
It can be much worse, guys..
Attitude to security should never be like ‘The squeaky wheel gets the grease’. Maznu just made it squeak!

Can you please raise the fetch variable 65535 character limit (double it or remove it completely), so that the error case "max line length 65535 exceeded!" is resolved? It happens both with GET and POST. As routerOS is more and more involved in the big data domain, it is imperative that su...

Can you please raise the 65535 character limit (double it or remove it completely), so that the error case "max line length 65535 exceeded!" is resolved? It happens both with GET and POST (I understand that could occur with GET, but it shouldn't with POST) As routerOS is more and more inv...

Can you please raise the 65535 character limit (double it or remove it completely), so that the error case "max line length 65535 exceeded!" is resolved? It happens both with GET and POST (I understand that could occur with GET, but it shouldn't with POST) As routerOS is more and more invo...

Netflow is really heavy for this job, sending ALL traffic or ALL headers ALL the time isnt the solution. NetFlow isn't that heavy. Really. I mean it. It's not something like port mirroring, it doesn't mirror packets nor even packet headers. It only sends to a collector an accumulated per-flow stati...

Andriys, it isnt possible right now to monitor realtime the bandwidth (data rates, packet rates, (not the actual traffic)) of a specific firewall rule or a specific queue. By monitor, I dont mean looking at a graph all the time, but let an external server do it and alert when something is wrong base...

Well, webrtc is a broad term, a bit confusing for a router. I'm talking about a mechanism of streaming realtime events (logs, bandwidth usage, etc) programmatically, so they can be analyzed by external servers. For example, imagine all traffic/statistics winbox tabs be available to an external serve...

Hi great mikrotik team! Any plans adding webrtc support/endpoint at routeros?  Webrtc is great at event streaming as it keeps the underneath channel always open eliminating tcp connection overhead and polling. This way several metrics, starting from network traffic, can be realtime monitored and can...

Well, this is solved by downgrading to 6.29.1 on firmware 3.24, enabling and upgrading back. 6.29.1 on 3.24 were used because of the full dpk name (protected_routerboot_v3_24_enable_6_29_1_mipsbe.dpk) Steps: 1. While on 6.34.2 /system routerboard settings set protected-routerboot=disabled 2. reboot ...

I encountered the same issue on exactly the same hardware on latest current routeros (6.34.2). Hardware: RB951G-2HnD ROS version: 6.34.2 Firmware version: 3.24 I copied the mipsbe dpk from the wiki (http://www.mikrotik.com/download/share/protected_routerboot_v3_24_enable_6_29_1_mipsbe.dpk) and reboo...

Well, the good news is that I succeeded with netinstall :) The 2 second count down was displayed only when the reset button was pressed. It seems that I missed it with hyperterminal and I hit it when I used putty instead. The "RouterOS cleanup..." section appeared only during the full rese...

PaulMT thank you for your reply. Just to clarify things, shouldn't it display anything like 'Press any key' or counting down to zero till it continues with booting? It displays none of these, just the loop that I posted before. G2Dolphin, Paul, I will try again tomorrow making sure to press any key ...

Hi all! I own a CRS125 which I normally reseted using the reset button procedure described here http://wiki.mikrotik.com/wiki/Manual:Reset. After the reset, the CRS went into a reboot loop every 6 sec. Plugging a serial console reveals the following: CRS125-24G-1S-2HnD CPU frequency: 600 MHz Memory ...

*) upnp - fixed memory leak

Anything more enlightening? Archs, configuration affected?

Regards,

Thanos

Hi all, I'm planning the expansion of my network and I'm looking at the CCR series. The requirements are: 1. ~ 400 layer 7 firewall rules (access blocks to specific domains (they have floating IPs, so can't be filtered via IP firewall)) 2. ~ 350Mbps uplink to the ISP. Which CCR model do you suggest?...

Any plans to add loop "break" or "exit" in RouterOS scripting?

Same netwatch problem happens when global variables are accessed via hotspot userprofile onlogin and onlogout scripts (actual scripts there or external scripts). Tested at version 5 and 6.

Any news?

nspotorno did you login at usermanager as the user (customer) who is the owner of the active users? Sessions show up only to the owner of these users. I'd like to be able to selecet which customers see the users, sessions, etc of other customers. For example, a read only customer could be used by th...

dunga try filling all fields at limitations, rate limits. When I apply rate limits, i think all fields are needed. Customers couldnt login if I didnt fill burst time for example.

Regards,
Thanos

Hi all! I'm using the latest user manager (5.15). I have two customers, 'admin' and 'manager'. 'Manager' is read only and his access permissions are all of his parent's ('admin') plus 'own users'. (No other 'own' permission is enabled). The bug occurs when i login as 'manager' and i go to 'Profiles'...

Do not uncheck the menues "undo", "redo" and "hide menu" and check again. results into q is null -> doesnt work! :shock: menus "undo", "redo", "hide menu" and "safe mode" checked -> works, but then after log in "design skin&...

I confirm exactly the same error, routeros 5.14 at RB750. Checked at all browsers.
Firefox reports: 'A is null' at engine.js (line 1).

Regards,
Thanos