MikroTik

autostoper76

https://fccid.io/TV7LHG60AD

tx only 3dB ??

autostoper76

Hi All I have a question there is an hardware power tx difference from WAP60G and LHG60G? SXTsq60 - antenna gain 10-13,5dBi,(depending on channel, lowest gain is on 62GHz), tx power max 363mW / 25,6dBm WAP60G - antenna gain 10-13,5dBi (depending on channel, lowest gain is on 62GHz), tx power max 14...

autostoper76

Does anyone use ALU400 DISH fpr LHG60 ?

please REAL INFO, print SCR ...

autostoper76

the answer to the big DISH for LHG 60 GHz we decided not make larger dish for LHG 60. Because it brings high investment and we don't expect to much profit. The gain could be theoretical aprox. 4 dB higher, but practical will be only 2 - 2,5 dB because of inaccuracy. Second reason is: we are not able...

autostoper76

+1 for channel sizes

100mhz or 200mhz steps will be better, at least 500mhz steps. not all need 1gb in ptp and in PTMP ( 8 online ) for sure

+1
Hi Mikrotik, is it possible? channel sizes 500 MHz

autostoper76

But this is also only plastic, expensive plastic Mikrotik should provide such cover for free: P

+1

autostoper76

NEW test, all frequency
ALU400 works very BADly !!!

autostoper76

I understand that selling your product kind of relies on you criticizing the original product, but this is getting ridiculous. Please stop. Eh Normis, I understand your frustration, but our product does not criticize your product, our product helps in the sale of your product like LHG60 etc :) We h...

autostoper76

I understand that selling your product kind of relies on you criticizing the original product, but this is getting ridiculous. Please stop.

Hi Dear Normis,

when will the new Wireless Link 60ghz ? or 24 GHz or 80 GHz

autostoper76

Can you read at all my posts????? Frequency: 64800, I write to you that YOU MUST CHANGE 66000 to 64800 on that distance on ALU dishes !!!! ALU 400 works extremely great on 64800 up to 1500meters So you are in wrong and you make the basic mistakes my friend :P DJ volt RSSI and MCS LHG 60 ORIGINAL is...

autostoper76

Can you read at all my posts????? Frequency: 64800, I write to you that YOU MUST CHANGE 66000 to 64800 on that distance on ALU dishes !!!! ALU 400 works extremely great on 64800 up to 1500meters So you are in wrong and you make the basic mistakes my friend :P I do it again today LHG60 Original VS A...

autostoper76

DJ volt Original LHG 60 much better than ALU 400 AP strana connected: yes frequency: 64800 remote-address: B8:69:F4:81:41:96 tx-mcs: 8 tx-phy-rate: 2.3Gbps signal: 80 rssi: -59 ORIGINAL -52 !!! tx-sector: 36 ORIGINAL 36 !!! tx-sector-info: center distance: 1367.87m tx-packet-error-rate: 0% the other...

autostoper76

ALU 400 VS Original LHG 60 ALU 400 does not work well LHG ALU 400 > interface w60g monitor wlan60-1 connected: yes frequency: 66000 remote-address: B8:69:F4:xxx tx-mcs: 7 tx-phy-rate: 1925.0Mbps signal: 70 rssi: -60 tx-sector: 27 tx-sector-info: center distance: 1367.88m tx-packet-error-rate: 0% -- ...

autostoper76

.. Forget about the 5GHz backup in the same device :P Our solution will be with 2 x RPSMA :) Dear DJ Volt, please Print SCREEN of Real Test V.S. 1. LHG 60 - LHG 60 2. DISH ALU 600MM - DISH ALU 600MM 3. DISH ALU 400MM - DISH ALU 400MM Permitree 1. distance 2. Capacitate 3. RSSI 4 rain please Real te...

autostoper76

So Mikrotik is making an "R2" (release 2?) version of the LHG-60 dish that will support up to 4,000 meter (2.5 mile)? Complete new design on dish, that allows higher gain and harder to align?

support up to 6,000 meter !!!

autostoper76

I've heard that Mikrotik has released the new LHG 60 Ghz R2 review for range up to 6000m and embedded wifi 5GHZ I can't find anything on a new R2 version. Do you have any more information? We run 5GHZ backup paths on every LHG60, but an integrated backup would be so much easier. Please, Ask Mikroti...

autostoper76

Please, post printscreen Link LHG 60GHz of real +4000m Please use search or go to https://forum.mikrotik.com/viewtopic.php?f=7&t=133374&sid=47ddbc29e62681386e2e807e11142588&start=200#p699697 e pa da, pricao mije da tebe da ima odlicna iskustva kuckamo se tamo na Vieru BR... pease Givme ...

autostoper76

Please, post printscreen Link LHG 60GHz of real +4000m Please use search or go to https://forum.mikrotik.com/viewtopic.php?f=7&t=133374&sid=47ddbc29e62681386e2e807e11142588&start=200#p699697 e pa da, pricao mije da tebe da ima odlicna iskustva kuckamo se tamo na Vieru BR... pease Givme ...

autostoper76

Please, post printscreen Link LHG 60GHz of real +4000m Please use search or go to https://forum.mikrotik.com/viewtopic.php?f=7&t=133374&sid=47ddbc29e62681386e2e807e11142588&start=200#p699697 e pa da, pricao mije da tebe da ima odlicna iskustva kuckamo se tamo na Vieru BR... pease Givme ...

autostoper76

For my links, falling snow was not issue at all. Only that sticky snow that got stuck on antenna is causing trouble. And of course that You need 5ghz backup for 60ghz link Please, post printscreen Link LHG 60GHz of real +4000m Please use search or go to https://forum.mikrotik.com/viewtopic.php?f=7&...

autostoper76

My humbly opinion is that oxygen absorption is an obstacle to build devices with bigger dish. I hope that I am wrong. But there is no obstacle to implement 5ghz backup in same device...

I've heard that Mikrotik has released the new LHG 60 Ghz R2 review
for range up to 6000m and embedded wifi 5GHZ

autostoper76

For my links, falling snow was not issue at all. Only that sticky snow that got stuck on antenna is causing trouble. And of course that You need 5ghz backup for 60ghz link Please, post printscreen Link LHG 60GHz of real +4000m Please use search or go to https://forum.mikrotik.com/viewtopic.php?f=7&...

autostoper76

My humbly opinion is that oxygen absorption is an obstacle to build devices with bigger dish. I hope that I am wrong. But there is no obstacle to implement 5ghz backup in same device...

autostoper76

For my links, falling snow was not issue at all. Only that sticky snow that got stuck on antenna is causing trouble. And of course that You need 5ghz backup for 60ghz link

Please, post printscreen Link LHG 60GHz of real +4000m

autostoper76

original LHG 60 real 4000+ ? how ?

autostoper76

LHG 60 real 4000+ m ? how ?

autostoper76

Which distances do you have to reach at 64800 and 66000

3500m

autostoper76

Why test on beta firmware??? Yes, it works better + 66000 On this dishes we can reach >3500m on 64800, ( on 66000 ) ;) please i want a real test because MT can reach 2400m on standard LHG, how? Original LHG 60 330mm DISH - small I need a larger antenna for better stability (Rain and Snow) I dont kno...

autostoper76

We can also send with discount to them who test for us and share details after tests

Please send two antennas for test, to our vendor B**24

the goods I take on Tuesday

autostoper76

ROS: 6.43.7 AP: tx=auto Station: tx=0 - alignment, tx=auto - checking, tx=36 we got perfectly center tx-sector 940Mbps TCP/IP all time We did not align the antennas on RSSI but on BTest and tx-sector The full bandwidth of 940Mbps TCP / IP, even at -65 RSSI, keeps the connection even on MCS1. Strang...

autostoper76

ROS: 6.43.7 AP: tx=auto Station: tx=0 - alignment, tx=auto - checking, tx=36 we got perfectly center tx-sector 940Mbps TCP/IP all time We did not align the antennas on RSSI but on BTest and tx-sector The full bandwidth of 940Mbps TCP / IP, even at -65 RSSI, keeps the connection even on MCS1. Strang...

autostoper76

Symmetrical, this is phase array so depend on tx-sector [beamforming pattern]... At now is possible to make 0-63 tx-sector to find the highest power output point

can Mikrotik be able to reduce the width of the channel at 500MHZ?
now is 2000MHZ.

autostoper76

Symmetrical, this is phase array so depend on tx-sector [beamforming pattern]... At now is possible to make 0-63 tx-sector to find the highest power output point

please more info
any link

autostoper76

DJ Volt
I'm happy
I'm looking forward to it

when the real test the antenna 600mm ? ( distance 3km, or more )

which polarization uses LHG 60
horizontal or vertical?
or both?

autostoper76

At first 1700meters tomorrow if weather will be good for tests

Devices are ready for tests
IMG_20181220_161548.jpg

good +1

autostoper76

DJ Volt
I'm happy
I'm looking forward to it

when the real test the antenna 600mm ? ( distance 3km, or more )

autostoper76

Some photo of project that is still modified

DSCF2690.JPG
DSCF2689.JPG
DSCF2687.JPG

I think
that it is a precision carrier for LHG 60ghz * 330mm
not good enough for such a big antenna
the antenna must be stronger than the structure

autostoper76

Please tell me how to run a LAN cable, we have a hole 27mm at back of the dish, feeder have also the hole, maybe do you have back cable mount via feeder to LAN port of the LHG60 electronic? Maybe other solution? I'm waiting for answers and maybe solutions? :) where the hole does not affect the entry...

autostoper76

More details at now... Please tell me how to run a LAN cable, we have a hole 27mm at back of the dish, feeder have also the hole, maybe do you have back cable mount via feeder to LAN port of the LHG60 electronic? Maybe other solution? I'm waiting for answers and maybe solutions? :) where the hole d...

autostoper76

More info and pictures will be soon.

Please DJ Volt more info... more picture

more test ....
please

autostoper76

lelelelelele more info is it

From the other side...

https://trzepak.pl/viewtopic.php?f=26&t ... 45#p500245

+1 for ALU 600

I just ordered an ALU 400 Link + Radom , yesterday
I expect to arrive soon
I'm reporting TEST results

autostoper76

More info and pictures will be soon.

Please DJ Volt more info

autostoper76

Some photo of project that is still modified :) Looks great! It would be perfect to have a fair real life comparison of your devices like: xxx meters, rainy day, perfect aligned systems, rssi and phys rate with: - LHG60G - LHG60G with alu dish - LHG60G with alu dish and abs cover - Custom 60G on WA...

autostoper76

What is an antenna?
the holder was made on a 3d printer.
how much is this material resistant to sun and rain ?

please more picture

autostoper76

Bravo BRAVO
Congratulations
when the test results will be LHG 60 VS DjVolt ALU-600mm

autostoper76

To all: We started work on the 600mm set. We already have ready-made dishes, covers, we only have to make a special handle for electronics with LHG60 made of aluminum. I will take photos next week ... Who needs such upgrades and how many pieces? Please write to PM ... The weekend passed ;) where ar...

autostoper76

what are the new experiences ?
with the new 6.44RC40 version

autostoper76

what are the experiences ?
with the new 6.44RC40 version

autostoper76

Wherever I can I use second grounding cable in combination with Schrack outdoor s/ftp cable. Anyhow, for me grounding is a must - regardless what many others are telling. +1 Earthing is mandatory and ethernet protector !!! https://3.imimg.com/data3/HP/FL/MY-10335140/ubiquiti-ethernet-surge-protecto...

autostoper76

great information
I can not wait
1+

autostoper76

alu electronic holder because also will be use for system cooling...

how will the ALU affect the passing of the signal from FEED to DISH ?

The ALU or metal can create a reflection

autostoper76

To all:

We started work on the 600mm set. We already have ready-made dishes, covers, we only have to make a special handle for electronics with LHG60 made of aluminum.

I will take photos next week ...

Who needs such upgrades and how many pieces? Please write to PM ...

+1

autostoper76

To all: We started work on the 600mm set. We already have ready-made dishes, covers, we only have to make a special handle for electronics with LHG60 made of aluminum. I will take photos next week ... Who needs such upgrades and how many pieces? Please write to PM ... which Parabolic dish is using?...

autostoper76

To all: We started work on the 600mm set. We already have ready-made dishes, covers, we only have to make a special handle for electronics with LHG60 made of aluminum. I will take photos next week ... Who needs such upgrades and how many pieces? Please write to PM ... >>>a special handle for electr...

autostoper76

Another record! Master side: connected: yes frequency: 66000 remote-address: 04:D6:AA:XX:XX:XX tx-mcs: 4 tx-phy-rate: 1155.0Mbps signal: 50 rssi: -62 tx-sector: 58 tx-sector-info: left 0.6 degrees, up 1.4 degrees distance: 4332.52m tx-packet-error-rate: 0% Slave side: connected: yes frequency: 6600...

autostoper76

############### PtP 60GHz Pro MHD: $660 exc VAT http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html www.siec.multimediahd.pl/60ghz ############### Madex Cables DJ VOLT:: when you make a 600mm antenna ? Please, treat us all Using our parabola 680 mm Jirous JRMB-680-24 with electronic from LHG 60 ...

autostoper76

###############
PtP 60GHz Pro MHD: $660 exc VAT
http://24.multimediahd.pl/en/60ghz/8-wi ... link-.html
www.siec.multimediahd.pl/60ghz
###############
Madex Cables
DJ VOLT:: when you make a 600mm antenna ?
Please, treat us all

autostoper76

There is no point having MCS12 when we are limited by GigE interface (I'm sure current hardware can do it, but there is no point why go that high). Instead of making cheap 100Mbit/s CPEs, Mikrotik should release SFP+ version or something like wired 5Gb/s. Also reducing modulation speed to get more ...

autostoper76

when will the new versions?
There is no improvement for a long time

6.39 === the latest version
https://wiki.mikrotik.com/wiki/Manual:T ... _changelog

autostoper76

when will the new versions?
There is no improvement for a long time

6.39 === the latest version
https://wiki.mikrotik.com/wiki/Manual:T ... _changelog

autostoper76

Wire Dish 60 GHz XL + 5Ghz BackUp
The LHG 60 PCBA has a 5Ghz Wifi part

when you make LHG 60 XL + 5GHz ?

LHG 391 mm
LHG XL 550 mm

autostoper76

Wire Dish 60 GHz XL + 5Ghz BackUp
The LHG 60 PCBA has a 5Ghz Wifi part

when you make LHG 60 XL + 5GHz ?

LHG 391 mm
LHG XL 550 mm

autostoper76

I have the same problem whit 6.39.1,

autostoper76

I shifted base 3.6 in the new Dude.

search notes does not work.

autostoper76

Search RB or other devices, does not work in SUBMAP
Search only works in SUBMAP

on version 3.6 works OK

autostoper76

The Dude client for ARM , missing
1) dude server nt client
2) separate package can be downloaded here:
http://download2.mikrotik.com/routeros/ ... 11-arm.npk

ok, Dude windows client, please link
dude client for windows