Community discussions

Search found 217 matches

by Maggiore81
Sun Aug 25, 2019 10:27 am
Forum: General
Topic: CCR1036 CGNAT rebooting whith about 5Gbps of traffic.
Replies: 1
Views: 353

Re: CCR1036 CGNAT rebooting whith about 5Gbps of traffic.

Did you try to enable fasttrack? Firewall is in raw?
by Maggiore81
Sat Aug 24, 2019 10:26 pm
Forum: General
Topic: Hap Ac 2, not capable of 1Gbit transfer
Replies: 11
Views: 1188

Re: Hap Ac 2, not capable of 1Gbit transfer

Hello.
I have ipv6 both enabled on fritz and mikrotik but the tests are done in ipv4.

I am not able to do that test right now.
I have the latest stable on it with no difference
by Maggiore81
Sat Aug 24, 2019 9:38 pm
Forum: General
Topic: Hap Ac 2, not capable of 1Gbit transfer
Replies: 11
Views: 1188

Re: Hap Ac 2, not capable of 1Gbit transfer

hello
he has negotiated correctly 1000 full.

maybe the problem is related to VLAN tagging?
by Maggiore81
Thu Aug 22, 2019 11:58 pm
Forum: General
Topic: Hap Ac 2, not capable of 1Gbit transfer
Replies: 11
Views: 1188

Re: Hap Ac 2, not capable of 1Gbit transfer

Tried with no avail. With the fasttrack the forwarding traffic is very fast and the cpu is very very low. No apparent issues, but no throughput. The customers complains that in speedtest doesnt see 900mbps as his neighbour with AVM Fritzbox 4040... Both of them are my customers, one with MT, the oth...
by Maggiore81
Thu Aug 22, 2019 5:46 pm
Forum: General
Topic: Hap Ac 2, not capable of 1Gbit transfer
Replies: 11
Views: 1188

Re: Hap Ac 2, not capable of 1Gbit transfer

I tried also without bridge, with the IP on the eth port directly. no differences. I tried with the dhcp-snooping disabled, hardware offload always enabled and H present. CPU usage 5% Counters in fasttrack moving quickly! Everything looks fine but no throughput. bandwidth test UDP between router and...
by Maggiore81
Thu Aug 22, 2019 5:12 pm
Forum: General
Topic: Hap Ac 2, not capable of 1Gbit transfer
Replies: 11
Views: 1188

Re: Hap Ac 2, not capable of 1Gbit transfer

/interface bridge add dhcp-snooping=yes name=bridge1-LAN protocol-mode=none /interface ethernet set [ find default-name=ether1 ] comment=WAN rx-flow-control=auto tx-flow-control=auto set [ find default-name=ether2 ] rx-flow-control=auto tx-flow-control=auto set [ find default-name=ether3 ] rx-flow-...
by Maggiore81
Thu Aug 22, 2019 4:40 pm
Forum: General
Topic: Hap Ac 2, not capable of 1Gbit transfer
Replies: 11
Views: 1188

Hap Ac 2, not capable of 1Gbit transfer

Hello I have one customer with a 1000/300 FTTH Line. I have installed to him one Hap AC 2, with latest long-term firmware. I have a plain bridge, with hardware offload on it, I have enabled IP Fasttrack on the router. Plain IP masquerade on it. On the ETH1 is connected the ONU, and I tag the VLAN on...
by Maggiore81
Wed Jan 02, 2019 4:12 pm
Forum: Forwarding Protocols
Topic: BGP aggregation example
Replies: 1
Views: 523

BGP aggregation example

Hello
just a quick question:

CCR1036 with 1 upstream and 2x public peering lans.
I announce 4x /22 classess (BGP Networks).

How can I announce to specific peers, individual /23 or /24 instead than the full /22 ?

can someone write an example?
thank you
by Maggiore81
Wed Nov 07, 2018 1:17 pm
Forum: General
Topic: Feature request: Force sending of DHCP options to clients
Replies: 26
Views: 6070

Re: Feature request: Force sending of DHCP options to clients

It should be super to select wich option to FORCE in the DHCP server settings

+1
by Maggiore81
Thu Aug 02, 2018 5:16 pm
Forum: Wireless Networking
Topic: Best wireless setup for LAN
Replies: 2
Views: 564

Re: Best wireless setup for LAN

Yes. Out of question.

I have made some.nv2 test with 2ms frame size and it appears to work fine
by Maggiore81
Wed Aug 01, 2018 4:15 pm
Forum: Wireless Networking
Topic: Best wireless setup for LAN
Replies: 2
Views: 564

Best wireless setup for LAN

Hello just a question: LAN: 1x Central router MT Hap 2/5Ghz with 20mhz channels., AP-BRIDGE mode We have some desks with one IT operator on it. Each desk has a Hap AC2 in STA-BRIDGE mode and it gives connection by cable to a VOIP Yealink phone, and a PC connected to the Hap AC2. 802.11 protocol is u...
by Maggiore81
Sun Mar 11, 2018 10:33 am
Forum: RouterBOARD hardware
Topic: CCR1036 Power Supply
Replies: 61
Views: 10257

Re: CCR1036 Power Supply

I will go on 1072 then
by Maggiore81
Sat Mar 10, 2018 12:49 pm
Forum: RouterBOARD hardware
Topic: CCR1036 Power Supply
Replies: 61
Views: 10257

Re: CCR1036 Power Supply

Thank you very much.
So we assume that if I buy tomorrow one CCR1036 I can get the "revised" version with green caps, and the connector for the 2nd PSU.
by Maggiore81
Sat Mar 10, 2018 12:09 pm
Forum: RouterBOARD hardware
Topic: CCR1036 Power Supply
Replies: 61
Views: 10257

Re: CCR1036 Power Supply

Hello Just to understand correctly: the "old" CCR1036 (all versions) had black capacitors. The "revised" CCR1036 (all versiones) have green capacitors. What about the "new" 1036 ? has not been announced yet, right? How can I know if the CCR I am about to buy new, is the old or the revised one? Do th...
by Maggiore81
Sun Oct 22, 2017 9:45 am
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM Fan speed [SOLVED]
Replies: 14
Views: 2987

Re: CRS317-1G-16S+RM Fan speed [SOLVED]

No, I am just using Switch OS because on this switch I dont need any routeros features. Just a plain L2 10G switch needed here.
I have put 2.6 but the problem remains.
by Maggiore81
Sun Oct 08, 2017 9:38 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM Fan speed [SOLVED]
Replies: 14
Views: 2987

Re: CRS317-1G-16S+RM Fan speed [SOLVED]

The SFP DAC from MT reads 101 °C
by Maggiore81
Tue Oct 03, 2017 6:47 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM Fan speed [SOLVED]
Replies: 14
Views: 2987

Re: CRS317-1G-16S+RM Fan speed [SOLVED]

Perfect.
I have the 2.5 and CPU temperature is 31° but the fan are running at full speed.

When do you plan to fix that? thank you
by Maggiore81
Mon Oct 02, 2017 6:04 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM Fan speed [SOLVED]
Replies: 14
Views: 2987

Re: CRS317-1G-16S+RM Fan speed [SOLVED]

I have inserted just DAC Cable from MT.
I am using SwitchOS and the fans are going at full speed.
Didnt try with RouterOS because I dont need it.

Is it planned to be fixed in the next SwOS ?
by Maggiore81
Fri Sep 29, 2017 2:17 pm
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM fans
Replies: 18
Views: 4380

Re: CRS326-24G-2S+RM fans

The temperature of my CRS326 is CPU temp 76°
is that a problem?
by Maggiore81
Wed Sep 20, 2017 9:33 am
Forum: Forwarding Protocols
Topic: OSPF across VLANS not making sense
Replies: 8
Views: 6795

Re: OSPF across VLANS not making sense

Upgraded from 6.38.7 to 6.40.3 on the switch and now it appears to work

with 6.38.7 latest bugfix it did not work.

Routers remain with 6.38.7 bugfix.
by Maggiore81
Wed Sep 20, 2017 12:22 am
Forum: Forwarding Protocols
Topic: OSPF across VLANS not making sense
Replies: 8
Views: 6795

Re: OSPF across VLANS not making sense

I am almost sure 100% that the problem is not in the CCR but in the CRS here is my config. The CCR is connected via SFP+1 to the SFP+2 of the CRS with a DAC Cable. On the switch I have: port 7 untagged vlan 201 (going to a remote router via a licensed microwave link) sfp+2 trunk port. MMM MMM KKK TT...
by Maggiore81
Tue Sep 19, 2017 9:38 pm
Forum: Forwarding Protocols
Topic: OSPF across VLANS not making sense
Replies: 8
Views: 6795

Re: OSPF across VLANS not making sense

I have checked it 10 times. Network type ptp I can ping the remote ip I am replacing a CCR with another CCR in a tower to seperate backbone with access layer. all conf build from scratch by hand. I have interface UP, instance running but no packets on VLAN interface where the OSPF is in. From the lo...
by Maggiore81
Tue Sep 19, 2017 6:33 pm
Forum: Forwarding Protocols
Topic: OSPF across VLANS not making sense
Replies: 8
Views: 6795

Re: OSPF across VLANS not making sense

Sorry to resurrect an old post.

CCR1009 with a DAC cable into a CRS326 switch.
5 vlan on the SFP port.
I am not able to start OSPF on vlan interface.
I can ping the remote end, I see it in ip neighbours but OSPF doesnt start.
what I am missing?
by Maggiore81
Sun Sep 10, 2017 7:10 pm
Forum: Beginner Basics
Topic: Question about SC , APC UPC connectors
Replies: 8
Views: 1397

Re: Question about SC , APC UPC connectors

Thank you.
But I remain with a big question.

All the SFP with SC connector, are UPC, blue ?

I know the mid coupler, no problem for that.
by Maggiore81
Sun Sep 10, 2017 6:59 pm
Forum: Beginner Basics
Topic: Question about SC , APC UPC connectors
Replies: 8
Views: 1397

Re: Question about SC , APC UPC connectors

Hello. thank you for your ansewer but you didnot answer to my question :D

The standard SFP has PC connectors, so I assume UPC (blue). I should need a patchrod UPC -> APC right?

The standard SFPs are UPC?
by Maggiore81
Sun Sep 10, 2017 12:01 pm
Forum: Beginner Basics
Topic: Question about SC , APC UPC connectors
Replies: 8
Views: 1397

Question about SC , APC UPC connectors

Hello I have a question. At the moment we run a FTTH P2P infrastructure UPC connector's based. We use WDM UPC SFP and a mikrotik media converter on the other side. All our distribution shelfs are 48x UPC (blue). Question: We are going to implement GPON and our consultants suggested to use APC (green...
by Maggiore81
Wed Sep 06, 2017 10:31 pm
Forum: SwOS
Topic: SwOS vs RouterOS considering switch-only functionality
Replies: 3
Views: 2070

Re: SwOS vs RouterOS considering switch-only functionality

sw0s to be very useful should have a way to support:

vlan 1
tagged 1-4
untagged 5-18
excluded 19-24
by Maggiore81
Fri Sep 01, 2017 7:54 pm
Forum: General
Topic: Help for VPN IPSEC
Replies: 2
Views: 570

Re: Help for VPN IPSEC

Thank you very much for the link.
I made it!
by Maggiore81
Fri Sep 01, 2017 5:53 pm
Forum: General
Topic: Help for VPN IPSEC
Replies: 2
Views: 570

Help for VPN IPSEC

Hello I need help what is the basic config for: My MT WAN 100.100.100.2 My MT LOCAL LAN: 192.168.11.254/24 REMOTE NOTE: wan: 200.200.200.1 remote LAN: 192.168.0.0/23 and 192.168.50.0/23 ISAKMP SA: encryption 3DES DH group2 auth: preshare password preshare: PASSWORD hash: MD5 lifetime 86400 phase1 IP...
by Maggiore81
Sun Aug 20, 2017 11:27 am
Forum: SwOS
Topic: SwOS vs RouterOS considering switch-only functionality
Replies: 3
Views: 2070

Re: SwOS vs RouterOS considering switch-only functionality

very interesting question
by Maggiore81
Sun Jun 18, 2017 8:33 pm
Forum: The Dude
Topic: Email Notifications - General Tab Missing!!!
Replies: 12
Views: 1442

Re: Email Notifications - General Tab Missing!!!

error connecting to server
by Maggiore81
Sun Jun 18, 2017 8:28 pm
Forum: The Dude
Topic: Email Notifications - General Tab Missing!!!
Replies: 12
Views: 1442

Re: Email Notifications - General Tab Missing!!!

on the RB, in the field server is 0.0.0.0

I try to set the ip address instead than name but UNABLE TO CONNECT TO SERVER
by Maggiore81
Sun Jun 18, 2017 6:56 pm
Forum: The Dude
Topic: Email Notifications - General Tab Missing!!!
Replies: 12
Views: 1442

Re: Email Notifications - General Tab Missing!!!

Thank you.
I have tried with aruba (italian isp) but it doesnt work

port 587 TLS
doest work at all :(

In the attachmenet I try to send an email to monitor@spadhausen.com mailbox using plaintext (supported by ISP)
by Maggiore81
Mon Jun 12, 2017 11:21 am
Forum: The Dude
Topic: Email Notifications - General Tab Missing!!!
Replies: 12
Views: 1442

Re: Email Notifications - General Tab Missing!!!

can someone post a valid guide to configure email notification in dude?

I have set the fields but the mail doesnt arrive.

I have set DNS name of server
port
TLS etc but no mail arrives.
by Maggiore81
Wed Jun 07, 2017 2:20 pm
Forum: Beginner Basics
Topic: how to use hotspot login by mac
Replies: 9
Views: 13639

Re: how to use hotspot login by mac

is it possibile that every user that connects to the newtork, get a ip from the local dhcp and automatically is enable to login in the network withouth any status page, and his MAC create automatically a queue?
by Maggiore81
Mon May 29, 2017 3:07 pm
Forum: RouterBOARD hardware
Topic: RB960 HEX Poe TEMPERATURE!
Replies: 5
Views: 988

Re: RB960 HEX Poe TEMPERATURE!

I have installed another RB960 with 3x POE on it.
I have opened the box and left horizontal with the top open.
still 57° C

the unit is running fine till now.
by Maggiore81
Thu May 18, 2017 9:59 am
Forum: RouterBOARD hardware
Topic: RB960 HEX Poe TEMPERATURE!
Replies: 5
Views: 988

Re: RB960 HEX Poe TEMPERATURE!

I had the idea to open the case, leaving the board horizontal with the open "roof" :)
by Maggiore81
Wed May 17, 2017 2:14 pm
Forum: RouterBOARD hardware
Topic: RB960 HEX Poe TEMPERATURE!
Replies: 5
Views: 988

RB960 HEX Poe TEMPERATURE!

Hello
RB960 HEX POE, with 4x POE (4x UBNT Prism AP) and 1 SFP on it.

57 °C

is that normal?

how can I keep it cool?
by Maggiore81
Sun Feb 26, 2017 1:01 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

fasttrack not enabled. Cpu load around 25%
by Maggiore81
Sat Feb 25, 2017 9:46 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

exact results when put above.

in some RB they work perfecly, in other absolutely not.
by Maggiore81
Sat Feb 25, 2017 9:45 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

I agree with you with the order of the simple queue. But when there is a parent queue, all the child are processed simultaneously.

Now I will try and I will post the results.
by Maggiore81
Sat Feb 25, 2017 9:32 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

well.. in every tower I manage, the parent is before all the child.
by Maggiore81
Sat Feb 25, 2017 9:27 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

in the queue list, if I sort for #
the parent queue is BEFORE the child queue.
by Maggiore81
Sat Feb 25, 2017 9:19 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

hello
as you can see:

add max-limit=100M/100M name="Fiber link" queue=default/default target=100.64.3.0/24,100.65.3.0/24

it covers 100.64.3.0/24 and 100.65.3.0/24
by Maggiore81
Sat Feb 25, 2017 1:59 pm
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

Re: QoS not working

hello. thank you to all for the interest in the topic. I used the very same config in a different tower and it works. the router are all 6.37.4 and a mix between HeX, CCR or 1100AHx2. I dont want PCQ because I need to see the traffic of each one . in this case I have 70 queues. If I remove the paren...
by Maggiore81
Sat Feb 25, 2017 10:51 am
Forum: General
Topic: QoS not working
Replies: 15
Views: 1280

QoS not working

Hello. I have this simple scenario: ether1 WAN ether2 Tower with my customers. I have set a parent queue with the total bandwidth available: ex. 60M down and 20M up. then I have created all the queues of my customers, setting max-limit and limit-at per users. when I apply the queues, the traffic is ...
by Maggiore81
Sun Feb 19, 2017 10:14 pm
Forum: RouterBOARD hardware
Topic: RB with 2x SFP+ and redundant PSU
Replies: 5
Views: 898

Re: RB with 2x SFP+ and redundant PSU

and that is a Shame.
The only CCR with double PSU is the 1009.

The question is... What if I use a single SFP+ with DAC onto a 10G switch... I will use two VLANs... but the performances wont be actually 10g...
by Maggiore81
Sun Feb 19, 2017 5:39 pm
Forum: RouterBOARD hardware
Topic: RB with 2x SFP+ and redundant PSU
Replies: 5
Views: 898

RB with 2x SFP+ and redundant PSU

Any hints?
why CCR1036 doesnt have the double PSU ?
I have seen the release of CCR1036 with 2x SFP+. Just a single PSU, why?
I think that a high end router should have at least a double PSU.

hearing from you soon.
by Maggiore81
Sun Feb 12, 2017 11:32 pm
Forum: RouterBOARD hardware
Topic: Question about CRS212-1G-10S-1SplusIN
Replies: 3
Views: 611

Re: Question about CRS212-1G-10S-1SplusIN

Can i saturate the sfp+ port?
by Maggiore81
Sat Feb 11, 2017 10:34 am
Forum: RouterBOARD hardware
Topic: Question about CRS212-1G-10S-1SplusIN
Replies: 3
Views: 611

Question about CRS212-1G-10S-1SplusIN

Hello according to the block diagram, I can use port 1-10 SFP to wire speed between them. block diagram here: https://i.mt.lv/routerboard/files/CRS212-block-diagram-150219161427.pdf I have an 10G uplink on the SFP+ port. I have all ports switched, with SFP+ as master port. can I achieve the max spee...
by Maggiore81
Fri Feb 10, 2017 2:11 pm
Forum: RouterBOARD hardware
Topic: SFP DDM not working
Replies: 3
Views: 1046

Re: SFP DDM not working

I am the very same situation: CRS212-1G-10S-1S+ with 6.37.4 bugfix [admin@MikroTik] > /system routerboard print routerboard: yes model: CRS212-1G-10S-1S+ serial-number: 64DD05F55160 firmware-type: qca8719L factory-firmware: 3.29 current-firmware: 3.29 upgrade-firmware:
by Maggiore81
Fri Feb 10, 2017 2:10 pm
Forum: General
Topic: no DDM info on CRS212 ?
Replies: 0
Views: 349

no DDM info on CRS212 ?

Hello
I have just tried:

CRS212-1G-10S-1S+ and a WDM SFP Opton DDM linked to a remote media converter.

On the CRS I cannot see DDM info.

the very same SFP on a RB HEX Poe, gives me all the readings: Temperature, signal, etc

why ?
by Maggiore81
Sat Feb 04, 2017 7:01 pm
Forum: General
Topic: RBFTC11
Replies: 0
Views: 408

RBFTC11

Hello just some info: I connect it to a remote device, using 1,25Gb LC SM SFP from Mikrotik. I use then UBNT 24V 0,5A giga POE. do I need some specific settings? like disabilng auto-neg on the remote device? Do I need to keep it on auto auto? I had some issues on with a FTC and two opton WDM SC 1,25...
by Maggiore81
Sat Dec 10, 2016 9:27 pm
Forum: Announcements
Topic: v6.37.3 [current] is released!
Replies: 58
Views: 20105

Re: v6.37.3 [current] is released!

Installed on Hex G3

100% traffic unclassified in profiler !
by Maggiore81
Sat Dec 03, 2016 7:25 pm
Forum: Wireless Networking
Topic: Wi-Fi on-off switch
Replies: 10
Views: 3041

Re: Wi-Fi on-off switch

no no scheduler!

My users would like to shutdown the wifi as in the cheap TP LINK routers.
by Maggiore81
Sat Dec 03, 2016 6:49 pm
Forum: Wireless Networking
Topic: Wi-Fi on-off switch
Replies: 10
Views: 3041

Re: Wi-Fi on-off switch

I know how to disable end enable the interface. The purpose of programming the button is to tell that to dumb users :D so they can disable the wifi because they think that wifi is not safe!
by Maggiore81
Sat Dec 03, 2016 6:47 pm
Forum: RouterBOARD hardware
Topic: WIFI On/Off Button
Replies: 2
Views: 807

WIFI On/Off Button

Hello
it is possible to reprogram a button for WIFI ON/OFF on Hap Lite and Hap AC Lite?
it could be the super device for us in our deployment.
by Maggiore81
Sat Nov 26, 2016 1:19 pm
Forum: Wireless Networking
Topic: Wi-Fi on-off switch
Replies: 10
Views: 3041

Wi-Fi on-off switch

Hello
is it possible to reprogram in the Hap Lite AC or similar routers, the button to enable or disable the wifi?
by Maggiore81
Tue Nov 01, 2016 12:23 pm
Forum: Announcements
Topic: v6.36.4 [bugfix] is released!
Replies: 51
Views: 14986

Re: v6.36.4 [bugfix] is released!

Maggiore81 - Please try to generate supout file on your device and send it to support. Also check Log - your device might be under attack. I have at least 4-5 devices (Hex lite and Hex only) with this behaviour. Onfortunately I reverted them to 6.34.6 and they worked flawlessy. I didnt have time to...
by Maggiore81
Sat Oct 29, 2016 12:07 pm
Forum: Announcements
Topic: v6.36.4 [bugfix] is released!
Replies: 51
Views: 14986

Re: v6.36.4 [bugfix] is released!

Found some issues. After one day, I found a lot of Hex and Hex-lite , RB750GL with cpu 100% on unclassified. did reset to factory re-applied configuration from export, and after a few minutes again 100%. downgraded to 6.34.6 and the router is perfectly fine the same router with the same conf that wo...
by Maggiore81
Thu Oct 27, 2016 11:39 pm
Forum: Announcements
Topic: v6.36.4 [bugfix] is released!
Replies: 51
Views: 14986

Re: v6.36.4 [bugfix] is released!

Upgrader my whole network from 6.34.6 to latest bugfix and cacti server stopped graphing.
Didnt found any solution yet.
by Maggiore81
Sun Oct 23, 2016 1:18 pm
Forum: General
Topic: Firewall rules + fastpath
Replies: 4
Views: 874

Re: Firewall rules + fastpath

I would set the IP SERVICES rules to restrict access to your router :)
by Maggiore81
Thu Oct 13, 2016 6:40 pm
Forum: General
Topic: MT Full changelog
Replies: 3
Views: 901

MT Full changelog

Where can I find the full changelog from 6.37.1 below?

I would like to check all the modifications between 6.34.6 to 6.37.1

thank you
by Maggiore81
Sat Jul 30, 2016 1:25 am
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 42049

Re: v6.36 [current] is released!

RB3011 flaps port 6-7-8 for 3 seconds.
not resolved in 6.36
by Maggiore81
Mon Nov 30, 2015 8:44 pm
Forum: Forwarding Protocols
Topic: OSFP NBMA - nbma neigh pool interval
Replies: 2
Views: 942

Re: OSFP NBMA - nbma neigh pool interval

no one knows?
by Maggiore81
Wed Nov 25, 2015 10:57 am
Forum: Forwarding Protocols
Topic: OSFP NBMA - nbma neigh pool interval
Replies: 2
Views: 942

OSFP NBMA - nbma neigh pool interval

Hello
what is the purpose of this setting? The default is 2minutes.

to have a faster convergence time, should I lower this?

I used NBMA since I have lot of wireless ptp bridges.

thank you
by Maggiore81
Fri Nov 20, 2015 3:19 pm
Forum: RouterBOARD hardware
Topic: RB3011 vs RB1100AHx2
Replies: 9
Views: 8591

RB3011 vs RB1100AHx2

Hello
with the RB3011 coming... what will be the use of RB1100AHx2?
by Maggiore81
Mon Oct 05, 2015 4:29 pm
Forum: General
Topic: Tunnel get only 400Mbps on CCR1036
Replies: 12
Views: 3018

Re: Tunnel get only 400Mbps on CCR1036

Well the LAN side of my router towards a routed networks to my internal LAN has MTU 1500. Everywhere on my network the MTU is 1500.

The WAN side of the router goes through a carrier's cloud (mtu 1500) towards my final router.

What are your suggestion for the MTU?
by Maggiore81
Mon Oct 05, 2015 10:46 am
Forum: General
Topic: Tunnel get only 400Mbps on CCR1036
Replies: 12
Views: 3018

Re: Tunnel get only 400Mbps on CCR1036

Well.

the default MTU of all the path is 1500 (I mean the path trough my carrier to my remote router)

The MTU of all my phisical interfaces is 1500..

but when I create the tunnel, the tunnel the default MTU of the tunnel is 1476 (since GRE is 24byte header) 1476+1500 is perfect..
by Maggiore81
Wed Sep 23, 2015 10:56 pm
Forum: General
Topic: Tunnel get only 400Mbps on CCR1036
Replies: 12
Views: 3018

Re: Tunnel get only 400Mbps on CCR1036

Hello. so a plain GRE tunnel (no encryption) over a fiber link (MTU1500) between a central CCR and a remote RB2011 or 1100AHx2. what are the expected performance? on a central HQ I plan to use a CCR 1009 and have 3 tunnels via fiber link to three remote sites: a 10mb, b 30mb, c 300mb full duplex. ca...
by Maggiore81
Wed Sep 23, 2015 10:49 pm
Forum: RouterBOARD hardware
Topic: CCR IPSec performance
Replies: 40
Views: 15449

Re: CCR IPSec performance

Hello on CCR 1009,with 6.30.4 what are the expeted performance for: CCR 1009 central site. WAN: 1Gb uplink "LAN" - 3 tunnels GRE (no encryption) to three remote sites at 10M, 30M, 300M. In the central roueter I will do NAT for the remote sites. Can I expect more than 500+mbps GRE traffic ? unencrypt...
by Maggiore81
Mon Sep 14, 2015 9:36 am
Forum: General
Topic: Trunk port very CPU intensive
Replies: 9
Views: 1231

Re: Trunk port very CPU intensive

Hello, according to here https://lafibre.info/images/doc/201106_spec_AR8327.pdf

the 8327 has 1Mb buffer, that is enough. HP 2824G has 0,75 and works flawlessy.
by Maggiore81
Sun Sep 13, 2015 9:12 pm
Forum: General
Topic: Trunk port very CPU intensive
Replies: 9
Views: 1231

Re: Trunk port very CPU intensive

Sorry if I recovered an old post... but is the situation still the same?

TRUNK and VLANS are made in software?

I have plans where I would use vlan tag ona single trunk port just to save ports onthe switch... but I would like to lose performances.
by Maggiore81
Wed Sep 09, 2015 7:18 pm
Forum: General
Topic: Simple queue + CCR
Replies: 6
Views: 1904

Re: Simple queue + CCR

I use PCQ queues, does these work on multi core systems?
RB1100ahx2 or CCR ?
by Maggiore81
Sun Jun 28, 2015 8:15 am
Forum: Announcements
Topic: Dual band AP for home use, SSID same or different?
Replies: 62
Views: 32617

Re: Dual band AP for home use, SSID same or different?

IMHO an home router with 5Ghz radios, should be fixed to use the indoor band ONLY of the spectrum. We don't need a 5ghz home router transmitting at 1W EIRP in 5.4 band... We should use it only into the indoor band 5150-5350 max 200mw EIRP.
by Maggiore81
Tue May 12, 2015 10:18 pm
Forum: General
Topic: v6.28 will be released this week!
Replies: 72
Views: 19004

Re: v6.28 will be released this week!

Thank you for the update. (I am posting this here because if it is a valid bug, I do not want it sneaking into 6.28, I would rather it be fixed first) I have a small bug I encountered with a CCR1036 and I am unsure if this is a config issue. I replaced a RB-1100AHx2 with a CCR1036. RB-1100AHx2 was ...
by Maggiore81
Sat May 09, 2015 7:52 pm
Forum: General
Topic: what are MTU and L2MTU in RB and BandwidthTest
Replies: 14
Views: 27310

Re: what are MTU and L2MTU in RB and BandwidthTest

Hello
I have a CCR 1009 and one 1100AHx2 directly connected with a Cat 6 SSTP cable 1gbit link.

CCR port 8, 1100AHx2 port 13.

Do I achieve any benefits setting MTU and L2 MTU at 9116 (maximum equal size supported by both routers).

thank you
by Maggiore81
Mon Apr 20, 2015 8:32 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62026

Re: RouterOS v6.28 released

cegner - Problem should be gone if you would reset configuration to defaults on you router. ... That is ABSURD. Between software update we need to reset router to default each time can I laugh? You may reset devices that are on the shelf, not ones that are in production with 1000+ users on it.! I t...
by Maggiore81
Mon Apr 20, 2015 8:23 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 62026

Re: RouterOS v6.28 released

cegner - Problem should be gone if you would reset configuration to defaults on you router.

...
That is ABSURD.
Between software update we need to reset router to default each time

can I laugh?

You may reset devices that are on the shelf, not ones that are in production with 1000+ users on it.!
by Maggiore81
Mon Apr 20, 2015 1:24 pm
Forum: General
Topic: Packet buffer Routerhardware
Replies: 3
Views: 656

Re: Packet buffer Routerhardware

It is not what I asked!!!!
by Maggiore81
Mon Apr 20, 2015 12:35 pm
Forum: General
Topic: Packet buffer Routerhardware
Replies: 3
Views: 656

Packet buffer Routerhardware

Hello
if I put RB in routed mode, I mean a routed port, what is the amount of packet buffer of this port?
by Maggiore81
Sun Mar 01, 2015 11:22 pm
Forum: Announcements
Topic: RouterOS v6.27 released
Replies: 273
Views: 100085

Re: RouterOS v6.27 released

One bug discovered from6.25.

in the routes list, I have set a route, with "check gateway" option enabled, so if the router is unreachable, it disables the route.
With 6.25 works, with 6.27 doesnt work. Even if the router is unreachable, the route is still up.
by Maggiore81
Fri Jan 30, 2015 7:26 pm
Forum: Beginner Basics
Topic: Hotspot splashpage / captive portal without auth
Replies: 29
Views: 30662

Re: Hotspot splashpage / captive portal without auth

It doesnt work!

I tried to use the button you provided but... maybe I set something wrong
by Maggiore81
Sun Jan 18, 2015 7:45 am
Forum: Scripting
Topic: Script fails to start and hangs
Replies: 2
Views: 650

Re: Script fails to start and hangs

/system script add name=Verifica_QOS policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source="/queue simple; :foreach i in=[find] \\\r\ \ndo={ \\\r\ \n:local sqName; \\\r\ \n:set sqName [get \$i name]; \\\r\ \n:local sqLevel; \\\r\ \n:set sqLevel [:find \$sqName \"BASE-R\"]; \\\r\ \...
by Maggiore81
Fri Jan 16, 2015 6:50 pm
Forum: Scripting
Topic: Script fails to start and hangs
Replies: 2
Views: 650

Script fails to start and hangs

Hello I had a RB1100AHx2 with 6.17 and a script set to run on startup. Everything was fine. I upgraded it with a CCR1009, the problem appears both on 6.17 then with 6.24, and script fail to load. 17:44:05 script,error script error: action timed out - try again, if error continues contact MikroTik su...
by Maggiore81
Fri Jan 09, 2015 2:54 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015453

Re: CLOUD CORE ROUTER

[quote="infused"]Just read the new newsletter. Are dual power supplies planned for the 36 core router? If so, when is it due? I don't really want to down grade. But it's always bugged me the 'carrier' router never had dual PSU's. About the double power supply it is still available from RB1100, use o...
by Maggiore81
Fri Jan 09, 2015 1:38 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015453

Re: CLOUD CORE ROUTER

Anybody with this port flapping on the CCR, can you try disabling the LCD screen, and see if anything changes at all ? hello we have this problem on x86 with v6.6rc1 28/10/2013 without package lcd a+ Thierry Same problem on 6.24 and RB2011, about 40mbit traffic heavy cpu load, port flaps regularly ...
by Maggiore81
Fri Jan 09, 2015 9:02 am
Forum: General
Topic: RB1100AHx2: Queue type
Replies: 0
Views: 366

RB1100AHx2: Queue type

Hello I have RB100AHx2 and about 500 simple queues. I use ROS 6.20 since over 6.20 I have port-flapping issues. Currently on the interfaces I have set interface queue: only-hardware-queue I use for queues, PCQ queues. Will I get benefit changing queue types for my ethernet ports, to multi-queue-ethe...
by Maggiore81
Sun Jan 04, 2015 10:18 am
Forum: Beginner Basics
Topic: ROS and Trasparent proxy problem
Replies: 0
Views: 660

ROS and Trasparent proxy problem

Hello. Even if I have read a lot of docs, I have managed to get it work partially. My configuration is the following: CPE: 100.64.7.1/24 Tower router RB850 ROS 6.24: 100.64.7.254/24 (ether2) to the cpe 100.64.0.79/23 (ether1) to the backbone and WAN The tower router is connected to the backbone usin...
by Maggiore81
Wed Dec 24, 2014 6:17 pm
Forum: Announcements
Topic: v6.24 RC
Replies: 50
Views: 31214

Re: v6.24 RC

6.20 is the latest stable for me. from 6.20 upwards I get very heavy lag connecting to a RB... about 10 secs to login via winbox. with 6.20 everything is OK I have been able to reproduce the problem. The problem of "lag" appears on the RB that is doing NAT MASQUERADE. For example in my case the RB i...
by Maggiore81
Sat Dec 13, 2014 8:48 am
Forum: Scripting
Topic: How to ***really*** block invalid TCP and UDP packet
Replies: 43
Views: 36223

Re: How to ***really*** block invalid TCP and UDP packet

Hmmm. I implemented them too. But is it really useful to drop port 0 ?

There are differents views on the matter!
by Maggiore81
Wed Dec 03, 2014 8:39 pm
Forum: Virtualization
Topic: metarouter tor project mikrotik?
Replies: 3
Views: 2797

Re: metarouter tor project mikrotik?

Can you please post the image of the metarouter that are you running with tor?
by Maggiore81
Sat Oct 11, 2014 1:47 pm
Forum: Virtualization
Topic: RB2011: ROS 6.20 + Metarouter guest 5.26 ?
Replies: 2
Views: 2034

RB2011: ROS 6.20 + Metarouter guest 5.26 ?

Hello.
Can I run Guest with 5.26 ??? on a RB2011 with 6.20 host?
by Maggiore81
Sat Oct 11, 2014 1:34 pm
Forum: General
Topic: Is this configuration possibile with multiple VLAN+NAT?
Replies: 1
Views: 590

Re: Is this configuration possibile with multiple VLAN+NAT?

I have found that with a RB 2011 and some 32Mbyte Metarouter OS, I can achieve what I need :D
by Maggiore81
Sat Oct 11, 2014 1:10 pm
Forum: General
Topic: Multiple DHCP on the same Router: OK - but networks???
Replies: 0
Views: 372

Multiple DHCP on the same Router: OK - but networks???

Hello I would like to put on a central DHCP for different vlans. The diagram is the following: eth1: WAN eth2: trunk port with multiple VLAN vlan 501: network #1 vlan 502: network #2 the same can be achieved with multiple phisical interfaces. VLAN 501: router ip: 192.168.1.254 - /24 subnet. I config...
by Maggiore81
Sat Oct 11, 2014 12:42 pm
Forum: General
Topic: 32Mb RAM devices and ROS 6
Replies: 24
Views: 4582

Re: 32Mb RAM devices and ROS 6

Well.. when I come to 6mbyte free ram I fear that the router could lock up.

I have about 30 simple queues (pcq queues) and nothing else on a RB750... I ended putting 5.26 and I have 14mb free
by Maggiore81
Sun Oct 05, 2014 11:36 am
Forum: General
Topic: 32Mb RAM devices and ROS 6
Replies: 24
Views: 4582

Re: 32Mb RAM devices and ROS 6

My packages are:
dhcp
system
security
adv-tools
routing

the router does:

OSPF
about 10 firewall rules.
routing from eth1 to eth2 and vice versa
dns cache
nothing else.
by Maggiore81
Fri Oct 03, 2014 5:36 pm
Forum: General
Topic: 32Mb RAM devices and ROS 6
Replies: 24
Views: 4582

Re: 32Mb RAM devices and ROS 6

I already keep track of the ram, and I schedule a reboot every 7 days to be safe.
by Maggiore81
Fri Oct 03, 2014 3:36 pm
Forum: General
Topic: 32Mb RAM devices and ROS 6
Replies: 24
Views: 4582

32Mb RAM devices and ROS 6

Hello what do you think about ROS 6.xx and 32Mb RAM devices as RB750 ? I use just: system ipv6 advanced-tools security packages and after boot they have about 10mbyte ram free , versus 5.26 that have about 18mbyte free. Is ROS 6.xx suitable for 32mb devices in the long run, or (as I do now) do I nee...
by Maggiore81
Sun Sep 28, 2014 2:09 pm
Forum: General
Topic: Is this configuration possibile with multiple VLAN+NAT?
Replies: 1
Views: 590

Is this configuration possibile with multiple VLAN+NAT?

Hello I have an idea: RB 750GL, it is not important wich one :) eth1 - WAN side of the network 100.64.9.100/24 - gw: 100.64.9.254 eth2 - TRUNK SIDE on the eth2 I have multiple VLAN: vlan500 192.168.0.254/24 vlan501 192.168.0.254/24 vlan502 etc each VLAN will be a customer private lan. the tricky pro...
by Maggiore81
Wed Aug 20, 2014 11:37 am
Forum: General
Topic: Downgrade from 6.18 to 5.26 - IPSec 100% CPU
Replies: 6
Views: 3169

Re: Downgrade from 6.18 to 5.26 - IPSec 100% CPU

I have left the 5.26 without security package... and I have resolved. I enabled telnet access since I will access it from GUI and then from my backbone... so a secure network.
by Maggiore81
Tue Aug 19, 2014 11:31 am
Forum: General
Topic: Downgrade from 6.18 to 5.26 - IPSec 100% CPU
Replies: 6
Views: 3169

Downgrade from 6.18 to 5.26 - IPSec 100% CPU

Hello If I downgrade from a plain RB750 6.18 (just NAT and some firewall rules) to 5.26, after about 30sec from boottime, the CPU goes 100% and IPSEC is using 100% CPU (according to profiler tool). I need to unistall or disable "security" package. re-upgrading to 6.18 with security enabled doesnt sh...
by Maggiore81
Sat Jul 19, 2014 5:57 pm
Forum: General
Topic: v6.16/v6.17
Replies: 187
Views: 46604

Re: v6.16/v6.17

I have upgraded a lot of RB from 6.14 to 6.16 and then 6.17

4 RB2011 died after a couple of hours of operation. (nand damaged, needed netinstall)
1 RB750GL died on reboot after upgrade (no lights at all, dead)


everything upgraded, first ros then bootloader
by Maggiore81
Wed Jun 11, 2014 2:03 pm
Forum: General
Topic: Help with this configuration with multiple VLAN/NAT
Replies: 3
Views: 702

Re: Help with this configuration with multiple VLAN/NAT

Hello.
I would like to have eth1 as a trunk port, and the RB should answer on eth1 (via VLAN6 at 100.64.6.104/24).
Also incoming from eth1 should pass VLAN100 and a wifi shoot to VLAN100 untagged via wlan interface (virtual ap)
by Maggiore81
Wed Jun 11, 2014 10:05 am
Forum: General
Topic: Help with this configuration with multiple VLAN/NAT
Replies: 3
Views: 702

Help with this configuration with multiple VLAN/NAT

Hello. I have to ask if it possibile to realize this configuration. I have a 951-2n with 6.14 I would like to achieve this: RB addresses: VLAN6: 100.64.8.104/24 VLAN100: 192.168.0.240/24 LAN: 192.168.0.254/24 the VLAN6 is the "wan" part the VLAN100 is just a passthrough vlan (bridge mode) The LAN is...
by Maggiore81
Sat May 17, 2014 1:32 pm
Forum: General
Topic: v6.13 released!
Replies: 177
Views: 48939

Re: v6.13 released!

Just upgraded from 6.12 to 6.13 (x86).

From the Winbox -> Queues -> Simple Queues - the list is empty.
In the terminal/ssh it's ok.

Anybody with the same problem?
me too.

rebooted two times and they are back.
by Maggiore81
Thu May 08, 2014 10:05 am
Forum: Beginner Basics
Topic: RB2011 slow speed
Replies: 42
Views: 11106

Re: Very low performance of RB2011

The conf are exactly identical ..cut..
maybe a nonsense, but try to disable the LCD on rb2011 ..
The very first test shows interesting results... stay tuned I will post them later

The problem is definitely the LCD. If I disable them I get very fast speed
by Maggiore81
Wed May 07, 2014 10:17 am
Forum: Beginner Basics
Topic: RB2011 slow speed
Replies: 42
Views: 11106

Re: Very low performance of RB2011

The conf are exactly identical ..cut..
maybe a nonsense, but try to disable the LCD on rb2011 ..
The very first test shows interesting results... stay tuned I will post them later
by Maggiore81
Wed May 07, 2014 9:39 am
Forum: Beginner Basics
Topic: RB2011 slow speed
Replies: 42
Views: 11106

Re: Very low performance of RB2011

I try.
I will let you know,.
by Maggiore81
Wed May 07, 2014 8:13 am
Forum: Beginner Basics
Topic: RB2011 slow speed
Replies: 42
Views: 11106

Re: Very low performance of RB2011

The conf are exactly identical ..cut..
maybe a nonsense, but try to disable the LCD on rb2011 ..
how can I do ?

the packages loaded are:

adv-tools
system
security
routing
ipv6
by Maggiore81
Mon May 05, 2014 3:18 pm
Forum: Beginner Basics
Topic: RB2011 slow speed
Replies: 42
Views: 11106

Re: Very low performance of RB2011

Hello.

The conf are exactly identical!!!!
I also tried to build them from scratch, onRB750GL and on RB2011-UAS-RM
latest ROS and latest routerboot.

I have never gained any benefit using RB2011.
I have seen high cpu usage on firewall module, using profile tool.

very low usage with RB750GL..
by Maggiore81
Sun May 04, 2014 9:42 am
Forum: Beginner Basics
Topic: RB2011 slow speed
Replies: 42
Views: 11106

Very low performance of RB2011

Hello. I have tested some RB2011 with latest ROS and latest firmware. It does NAT from one eth (wan eth1) and one eth (lan eth6. Just plain NAT 1-1 for some about 50 hosts and it is fed via a 100Mbit FD Fiber uplink (eth1) no VLAN, about 10 firewall rules and nothing else. no QoS, no queue, just NAT...
by Maggiore81
Fri Mar 28, 2014 10:16 pm
Forum: General
Topic: Flow Control in ROS
Replies: 10
Views: 3155

Re: Flow Control in ROS

I have a similar situation here: RB1000 connected: eth6 WAN link (100mbit FD bandwidth available) but connected to carrier's CPE at GigE speed. eth1 1Gbps to Media Converter (gig speed) Media converter connected at GigE speed to UBNT Thoughswitch 5 From the TS-5 I have a powerbridge M5 from UBNT wit...
by Maggiore81
Thu Mar 27, 2014 12:14 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79944

Re: v6.11 released

Upgraded RB951-2n from 6.10 to 6.11
Bridge network and wlan1 interface disappears.
reboot and it works normal. after a few minutes it disappears.
by Maggiore81
Mon Feb 24, 2014 8:56 pm
Forum: RouterBOARD hardware
Topic: RB2011 performance expectations
Replies: 13
Views: 10224

Re: RB2011 performance expectations

Now:ROS 6.10 RB2011 latest routerboot and latest ROS

wan: eth6 100mb fiber link
LAN: eth2 1000gb to giga switch

I do NAT 1-1 with about 20 users, and nat "overload" one to many to about 300 users.

I can pass about 100mbit but cpu have average of 70%
by Maggiore81
Wed Feb 19, 2014 10:37 am
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82363

Re: v6.10 released

Upgraded 1100AHx2 with 6.9 to 6.10, lost VRRP configurations.
by Maggiore81
Sat Feb 15, 2014 6:24 pm
Forum: Beginner Basics
Topic: Hotspot splashpage / captive portal without auth
Replies: 29
Views: 30662

Re: Hotspot splashpage / captive portal without auth

Hello. I have another idea: instead than refreshing the page and auto-inserting the username/password combination, can we do a button that (as nodogsplash) clicking on it gives the MT the username/password combination? So the user reads the page and clicks CONNECT (that login on the network). Anyone...
by Maggiore81
Thu Jan 16, 2014 7:30 pm
Forum: General
Topic: Mikrotik RB as full DNS Server (forward+reverse)
Replies: 3
Views: 1171

Re: Mikrotik RB as full DNS Server (forward+reverse)

hello.

Well I have a /24 linked to a fiber connection.
I need to set reverse DNS.
I could use 2x MT and set all 255 entries in the static host table.

It should work. I will need only that.
by Maggiore81
Thu Jan 16, 2014 11:27 am
Forum: General
Topic: Mikrotik RB as full DNS Server (forward+reverse)
Replies: 3
Views: 1171

Mikrotik RB as full DNS Server (forward+reverse)

Hello.
I would ask you the following:

can I use 2x Rb 2011 do do the DNS server for forward+reverse?

I am getting a /24 range and I need to setup the dns for the reverse DNS.

Can I use the MT for that?

I could insert every entry for each IP/host of the /24 into the MT.
by Maggiore81
Tue Dec 17, 2013 10:05 am
Forum: General
Topic: Wich SFP SC for RB2011?
Replies: 1
Views: 905

Wich SFP SC for RB2011?

Hello
I have a fiber link with these media converter:

AT-MC103XL

Fibra Monomodale 9/125 both terminations with SC

I would like to use a RB2011 with SFP.

Wich SFP media conv chould I use?

thank you
by Maggiore81
Mon Sep 23, 2013 12:45 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 60944

Re: v6.4 released

I have upgraded a RB750GL from 5.26 to 6.4 everything went well, except from the simple queues that needed a little adjustments. The weird thing is that with 6.4 it doesnt respond to pings, and so all of my CPE's just auto-reboot every 15min... and if I downgrade to 5.26 it responds to pings again. ...
by Maggiore81
Sat Sep 21, 2013 8:52 am
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

Set the timeout of TCP connections to 1 hour instead than 1 day
by Maggiore81
Sat Sep 07, 2013 12:55 pm
Forum: Scripting
Topic: How to limit a user to a given amount of traffic?
Replies: 85
Views: 78345

Re: How to limit a user to a given amount of traffic?

I have managed to let it work but I am not able to read total bytes since in my queue the total statistics of the queue remains to 0.

how can I let it populate correctly?
Also I will be interested only in checking 1GB of download traffic..
by Maggiore81
Sat Sep 07, 2013 9:38 am
Forum: Scripting
Topic: How to limit a user to a given amount of traffic?
Replies: 85
Views: 78345

Re: How to limit a user to a given amount of traffic?

This is my script: /queue simple; :foreach i in=[find] \ do={ \ :set sqName [get $i name]; \ # :set sqTotalAvgRate [get $i total-avg-rate]; \ :set sqTotalBytes [get $i total-bytes]; \ :set sqLevel [:find $sqName "\[BASE-R\]"]; \ :if ($sqLevel >= 0) do={ \ set $i max-limit=256K/10M; \ :if ($sqTotalBy...
by Maggiore81
Sat Sep 07, 2013 8:41 am
Forum: General
Topic: Fist Gb at 10Mbit, then limited to 512Kbps
Replies: 4
Views: 1202

Re: Fist Gb at 10Mbit, then limited to 512Kbps

http://forum.mikrotik.com/viewtopic.php ... ight=quota

I have seen an example of service A, B, C but I am not able to reproduce it.
I have seen in the first post of the second thread's page
can someone help me?
even on a consulting form?
by Maggiore81
Fri Sep 06, 2013 11:27 am
Forum: General
Topic: Fist Gb at 10Mbit, then limited to 512Kbps
Replies: 4
Views: 1202

Re: Fist Gb at 10Mbit, then limited to 512Kbps

Can you provide some hints? I have a list of queues: from queue #5 to #100 (for example) each queue is as this: add interface=eth2-master-Torre7 max-limit=256k/4M name=Fogli queue=pcq-upload/pcq-download target-addresses=172.16.7.15/32 total-queue=default add interface=eth2-master-Torre7 max-limit=2...
by Maggiore81
Tue Sep 03, 2013 5:57 pm
Forum: General
Topic: RB1100 hotspot hangs every 3 days
Replies: 13
Views: 2614

Re: RB1100 hotspot hangs every 3 days

Why dont you upgrade to 5.25 ?
by Maggiore81
Sat Aug 17, 2013 1:49 pm
Forum: General
Topic: Fist Gb at 10Mbit, then limited to 512Kbps
Replies: 4
Views: 1202

Fist Gb at 10Mbit, then limited to 512Kbps

Hello. I have OS 5.25. I have set up till now all simple queues to limit the customer's IP addresses to their internet profile (ex. 2M/256Kbps). I would like to set up this rule: The first Gb of the day is set to 10M/1M Mbit bandwidth, then after 1Gb of consumed traffic, the line is set to 512Kbps/2...
by Maggiore81
Thu May 23, 2013 9:33 pm
Forum: General
Topic: Bogons should we still block them?
Replies: 2
Views: 1234

Re: Bogons should we still block them?

Personally I block bogons from the outside world. add address=0.0.0.0/8 disabled=no list=BOGONS add address=10.0.0.0/8 disabled=no list=BOGONS add address=100.64.0.0/10 disabled=no list=BOGONS add address=127.0.0.0/8 disabled=no list=BOGONS add address=169.254.0.0/16 disabled=no list=BOGONS add addr...
by Maggiore81
Mon May 13, 2013 12:37 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - unable to upgrade routerboot
Replies: 8
Views: 2269

Re: RB2011UAS-RM - unable to upgrade routerboot

maybe some settings in bootloader? http://forum.mikrotik.com/viewtopic.php?f=2&t=43806#p244449 /system routerboard settings set force-backup-booter=no /system routerboard upgrade /system reboot this is my conf baud-rate: 115200 boot-delay: 2s enter-setup-on: any-key boot-device: nand-if-fail-then-e...
by Maggiore81
Sun May 12, 2013 11:31 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - unable to upgrade routerboot
Replies: 8
Views: 2269

Re: RB2011UAS-RM - unable to upgrade routerboot

Have you tried upload fwf file?

http://routerboard.com/fwf/158/ar9344-3.07.fwf
Uploaded and upgraded, but still 2.41
maybe some settings in bootloader?
by Maggiore81
Sun May 12, 2013 6:48 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - unable to upgrade routerboot
Replies: 8
Views: 2269

Re: RB2011UAS-RM - unable to upgrade routerboot

/system routerboard upgrade
/system reboot
Do you think I am dumb?

I have already done that command, did you read my post before answering?

It tells that upgrade was done successfully but it is not.. after reboot I still have 2.41
by Maggiore81
Sun May 12, 2013 10:54 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - unable to upgrade routerboot
Replies: 8
Views: 2269

RB2011UAS-RM - unable to upgrade routerboot

Hello I have a RB2011UAS-RM with 5.25 I have in the past downgraded the routerboot firmware to 2.41 with success. Now I am going to upgrade to 3.07 (I hope that crashes that happened with 3.02 will not be here) but even if it tells that routerboot was upgraded successfully, after reboot I still get ...
by Maggiore81
Wed May 08, 2013 3:43 pm
Forum: General
Topic: v5.25 released
Replies: 52
Views: 16477

Re: v5.25 released

For who is selling the RB1200
if you are in Europe I could buy it.
please contact me
admin@spadhausen.com

thank you
by Maggiore81
Wed May 08, 2013 3:36 pm
Forum: General
Topic: Tutorials blogs and other helpful RouterOS resources
Replies: 65
Views: 57141

Re: Tutorials blogs and other helpful RouterOS resources

better to create a sticky post with sites sorted by language
by Maggiore81
Wed May 08, 2013 2:39 pm
Forum: General
Topic: RouterBoot 3.07
Replies: 5
Views: 1912

Re: RouterBoot 3.07

So what is the benefit in RB750s or 2011, to upgrade from 2.41 (very stable for me) to 3.x (3.02 gave me a lot of dead routerboards) ?
by Maggiore81
Tue May 07, 2013 9:07 pm
Forum: General
Topic: RouterBoot 3.07
Replies: 5
Views: 1912

Re: RouterBoot 3.07

so?
by Maggiore81
Sat May 04, 2013 10:10 am
Forum: General
Topic: RouterBoot 3.07
Replies: 5
Views: 1912

RouterBoot 3.07

Changelog?
by Maggiore81
Mon Apr 15, 2013 12:48 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

But wich firmware routerboot do you have?
by Maggiore81
Wed Mar 20, 2013 10:48 pm
Forum: General
Topic: VLAN on a switch-group port
Replies: 1
Views: 279

VLAN on a switch-group port

Hello, simple question:

I have a rb750, with switched ports eth2-eth3-eth4 (the eth2 is the masterport)

Can I use VLANs on a switched port groups, doing the same "trunk" on eth2,eth3,eth4 ?

thank you
by Maggiore81
Wed Mar 20, 2013 12:06 am
Forum: RouterBOARD hardware
Topic: RB 1xxx product advice
Replies: 6
Views: 1147

Re: RB 1xxx product advice

I see.

What about the power consumption between 1200 and 1100Hx2 ?

Thanks
by Maggiore81
Tue Mar 19, 2013 10:57 pm
Forum: RouterBOARD hardware
Topic: RB 1xxx product advice
Replies: 6
Views: 1147

Re: RB 1xxx product advice

Thank you
but the 1100hx2 will be even faster! And what about noise, it is so devastating?
by Maggiore81
Mon Mar 18, 2013 8:49 pm
Forum: RouterBOARD hardware
Topic: RB2011 switch port groups
Replies: 38
Views: 48768

Re: RB2011 switch port groups

Why is there no entry under "Switch all ports". According to http://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features this option is only meaningful on RB450G and RB435G boards. On your device (RB2011, I assume) this option does nothing. Does it mean the CPU is handling the traffic now? That depen...
by Maggiore81
Mon Mar 18, 2013 5:14 pm
Forum: RouterBOARD hardware
Topic: RB 1xxx product advice
Replies: 6
Views: 1147

Re: RB 1xxx product advice

Hello.
thank you

but will be a great increase in performance from RB2011-RM-UAS?
by Maggiore81
Mon Mar 18, 2013 10:35 am
Forum: RouterBOARD hardware
Topic: RB1100 Fan issue
Replies: 46
Views: 17963

Re: RB1100 Fan issue

Any news about 1100 fans?
I am about to buy a 1100Hx2 but if it is terribly noise I am concerned... Ok that it will be in the server room but I prefer fanless or low-noise devices (as routers).
by Maggiore81
Mon Mar 18, 2013 10:25 am
Forum: RouterBOARD hardware
Topic: RB 1xxx product advice
Replies: 6
Views: 1147

RB 1xxx product advice

Hello I would like to replace in the near future, my central firewall. It is a 2011-RM-UAS and is configured as the following: a) port 6-7 "core switchgroup" b) port 5 giga uplink to backbone network c) port 9, routed port to a subnet The router doesnt do NAT, it has: a) conntrack b) about 101 simpl...
by Maggiore81
Thu Mar 14, 2013 10:07 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

I did not understand your question.
put latest router os and update on the board manually the older FWF file
by Maggiore81
Wed Mar 13, 2013 10:48 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

I speak about the routerboot firmware, as the BIOS of the card.

Since I had 2.41 bootloader, I upgraded about 10 versions of routerOS without any issue.
when I put 3.x I began having troubles with normal updates.
by Maggiore81
Wed Mar 13, 2013 10:45 am
Forum: RouterBOARD hardware
Topic: What to do when even NetInstall does not help ?
Replies: 6
Views: 1882

Re: What to do when even NetInstall does not help ?

The problem that have caused me a lot of troubles, was upgrading from 2.41 to 3.xx routerboot firmware.

I experienced in 750s, 2011UAS-RM and 450s

reverted bootloader to 2.41 and latest ROS and they are running fine.
by Maggiore81
Sun Mar 10, 2013 11:40 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

Hello. I already use DUDE to monitor network devices, thank you. I always connect with latest winbox using IP addresses not MAC addr, When new routerboot fw is available I put it on. I began having problems updating RB2011 and some 750 with latest firmware 3.x, and these units died from 5.23 to 5.24...
by Maggiore81
Sat Mar 09, 2013 12:39 am
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

Keep latest routeros,
just recover the unit using netinstall then downgrade the firmware to 2.41

it will be ok again. There are serious problems with firmware 3.x
by Maggiore81
Fri Mar 08, 2013 11:36 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

try to leave latest ROS and firmware 2.41
by Maggiore81
Fri Mar 08, 2013 12:50 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - better POE 24V or DC power ?
Replies: 4
Views: 1707

Re: RB2011UAS-RM - better POE 24V or DC power ?

Hello
I have opened the 2011 because I was looking for the reset switch (it is not written on the external case).
I have seen the the PSU is detachable.
by Maggiore81
Fri Mar 08, 2013 12:00 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

In the mean time I downgraded all my 2011 and routers to FW 2.41

I began having troubles with 3.x

in the past I upgraded downgraded everything with fw 2.41 without any issue
by Maggiore81
Fri Mar 08, 2013 11:12 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - better POE 24V or DC power ?
Replies: 4
Views: 1707

Re: RB2011UAS-RM - better POE 24V or DC power ?

Thank you
the router is in a datacenter, with ups, stable energy and about 18 °C temperature.
the routers have 24 °C board temperature, they operate at nice temperature.
I put them with ubiquiti POE 24V 1A with ground.
by Maggiore81
Fri Mar 08, 2013 11:11 am
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

I changed PC, with a broadcom network card it worked and I recovered the router.
With Intel network card it doesnt work.
by Maggiore81
Wed Mar 06, 2013 6:14 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

yes
on console output it format flash then got stuck on BAD NETWORK CONNECTION and doesnt upload files
by Maggiore81
Wed Mar 06, 2013 12:02 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

I am not able to do netboot because It comes out with bad network connection
by Maggiore81
Tue Mar 05, 2013 9:50 am
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

It should be nice to know wich is the best firmware (routerboard firmware) for the 2011.
I have ordered new boards and I dont want to destroy them. Here RMA is more expensive than buying new ones.
by Maggiore81
Mon Mar 04, 2013 11:27 am
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

I have tried with console cable + netboot.

The first one, no output, DEAD

the second one, bad network connections and doesnt copy the firmware.
by Maggiore81
Sun Mar 03, 2013 9:53 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Re: Dead RB2011-RM after upgrade to 5.24

Today, the second one has died after upgrade.
from 5.23 to 5.24

every routerboard under UPS, with shiedled cable, 20 °C temp... if MT costs 80 EUR and cisco cost 5000 there is a reason...
by Maggiore81
Fri Feb 22, 2013 3:22 pm
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM - better POE 24V or DC power ?
Replies: 4
Views: 1707

RB2011UAS-RM - better POE 24V or DC power ?

Hello I have in a Rack a RB2011UAS-RM, that is powered with the integrated AC/DC power supply. I recently disconnected it (it is a shame to have it integrated with the routerboard and not detachable) and I now use a POE from Ubiquity, the 24V-1A model, with ground (I use a shielded Cat 5E-FTP cable)...
by Maggiore81
Fri Feb 22, 2013 3:11 pm
Forum: RouterBOARD hardware
Topic: Dead RB2011-RM after upgrade to 5.24
Replies: 13
Views: 4847

Dead RB2011-RM after upgrade to 5.24

Hello scenario: RB2011-RM running super, upgraded to 5.24 and it died. It was running 5.23 with latest routerboard firmware, perfectly. Died as: a) just blue led powers-up b) no console output (using a cisco cable to my serial port, no output in any speed 9600 to 115200) c) LCD is off d) when I conn...
by Maggiore81
Fri Feb 22, 2013 12:58 am
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

The 2011 just died
I link it to power,
the blue led powerups, no lcd, nothing

I plugged in the console cable to the rear port, nothing
no output
by Maggiore81
Thu Feb 21, 2013 10:54 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

Well
In the last month died a RB750 ugrading from the 5.21 to 5.23

latest firmware installed.

died and stops.
by Maggiore81
Thu Feb 21, 2013 10:37 pm
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 44255

Re: 5.24 released!

A new RB2011 died after upgrade from 5.23 to 5.24...

wow
by Maggiore81
Tue Jan 08, 2013 4:05 pm
Forum: General
Topic: RB2011 Routing speed
Replies: 13
Views: 6327

Re: RB2011 Routing speed

no one gives an opionion?

A switch chip at 100mb of 5 ports, whouls do 5x100 FD of switched traffic, or not?
by Maggiore81
Sun Jan 06, 2013 12:36 pm
Forum: General
Topic: Doing NAT for 2 addressess at once.
Replies: 0
Views: 331

Doing NAT for 2 addressess at once.

Hello I would like to ask this question: I have a /28 pool of public IP. I would do NAT to 2 private ip at once: example: 1.1.1.1/28 (public IP) should be doing NAT OVERLOAD to 192.168.0.1/24 and 192.168.0.2/24 1.1.1.2/28 (public IP) should be doing NAT OVERLOAD to 192.168.0.3/24 and 192.168.0.4/24 ...
by Maggiore81
Fri Dec 21, 2012 5:02 pm
Forum: General
Topic: How to redirect port 25 to a specific server
Replies: 1
Views: 684

How to redirect port 25 to a specific server

Hello I have this situation: Internet ISP #1 internet ISP #2 users goes out from ISP1 or ISP2 according to a mangle rule that matches an address list. So: Users ISP 1 and Users ISP 2. OK. the smtp relay server for isp 1 is: smtp-isp1.relay.com the smtp relay server for isp 2 is: smtp-isp2.relay.com ...
by Maggiore81
Sun Dec 16, 2012 9:58 pm
Forum: Scripting
Topic: Script for router backup but overwrite older one in files?
Replies: 13
Views: 2284

Re: Script for router backup but overwrite older one in file

Is it possibile to schedule an "export compact" backup to be sent via email / ftp ?
by Maggiore81
Thu Dec 13, 2012 11:39 pm
Forum: Forwarding Protocols
Topic: OSPF Design consideration
Replies: 10
Views: 4738

Re: OSPF Design consideration

Hello
all areas are now default type
by Maggiore81
Thu Dec 13, 2012 10:21 pm
Forum: Forwarding Protocols
Topic: OSPF Design consideration
Replies: 10
Views: 4738

Re: OSPF Design consideration

Hello.

I have a router in each area because there I do routing, simple queue, firewall filter (no nat), just routing.
When I add a block of users in a specific geografic zone (I translated that in OSPF AREA #).
We are WISP and each tower is a OSPF area, and a specific subnet.
by Maggiore81
Sun Dec 09, 2012 2:17 pm
Forum: Forwarding Protocols
Topic: OSPF Design consideration
Replies: 10
Views: 4738

Re: OSPF Design consideration

eheheh when some "complex" setup comes in, no one is going to post anything about it? :)
by Maggiore81
Tue Dec 04, 2012 10:43 am
Forum: Scripting
Topic: how to limit 5-session(5-connection) for each client
Replies: 19
Views: 4020

Re: how to limit 5-session(5-connection) for each client

Hello.
I use simple queues (PCQ) to limit user traffic.
I also limited each IP to 150 connections and it is very good.

It just drops when they enable P2P without proper configuration.
by Maggiore81
Mon Dec 03, 2012 5:57 pm
Forum: Forwarding Protocols
Topic: OSPF Design consideration
Replies: 10
Views: 4738

OSPF Design consideration

Hello Attached is found a diagram of my network. From each "Area" we have a network 172.16.x.0/24 (where area 2 has 2.0; area 3 has 3.0 etc) All traffic, some from area 2 and some from area 3 will go out through FW (FW1 or FW2) Actually everything works. We have OSPF running between backbone and the...
by Maggiore81
Thu Nov 29, 2012 11:12 pm
Forum: General
Topic: RB2011 Routing speed
Replies: 13
Views: 6327

Re: RB2011 Routing speed

Very interesting topic.

If I Bond port 6-10, couldnt I achieve an aggregate throughput higher than 100mbit?
It seems very odd.

No 100Mbit shared in 5 ports!!!!
It would be a shame for MT
by Maggiore81
Wed Nov 28, 2012 12:15 pm
Forum: General
Topic: Mikrotik VVRP with tracking
Replies: 8
Views: 2228

Re: Mikrotik VVRP with tracking

/interface vrrp set name="VRRP 5 Ridondanza Fibra su C877 RA" priority=80


doesnt work. It asks me "numbers" ?
by Maggiore81
Wed Nov 28, 2012 12:30 am
Forum: General
Topic: Mikrotik VVRP with tracking
Replies: 8
Views: 2228

Re: Mikrotik VVRP with tracking

But I cannot chose the source interface to send the icmp packet, right?
by Maggiore81
Wed Nov 28, 2012 12:29 am
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 79052

Re: Mikrotik Router act as a switch and transparent firewall

I got an answer from MT Support.

Dont use the eth1 as WAN port, if you want the 2-5 being used as a switch. It behaves as a hub then. It is a cpu port (told me)

I solved NOT using the port 1, and using 2 as WAN end 3-5 as LAN. It worked perfectly.
by Maggiore81
Wed Nov 28, 2012 12:25 am
Forum: Forwarding Protocols
Topic: Dual Setup with OSPF - Full duplex link
Replies: 23
Views: 12398

Re: Dual Setup with OSPF - Full duplex link

Well, it could be very useful to have the same flat network (bridged) making the OSPF+WIFI interface, completely trasparent
by Maggiore81
Wed Nov 28, 2012 12:22 am
Forum: General
Topic: Feature Request : "Net Watch" with "Advanced Tab"
Replies: 7
Views: 1782

Re: Feature Request : "Net Watch" with "Advanced Tab"

We should choose WHAT to monitor, and via WICH interface
by Maggiore81
Tue Nov 27, 2012 9:15 pm
Forum: RouterBOARD hardware
Topic: RB2011 performance expectations
Replies: 13
Views: 10224

Re: RB2011 performance expectations

OK, but switch mode is wire speed and faster, not done by cpu as software bridge
by Maggiore81
Mon Nov 26, 2012 12:07 pm
Forum: General
Topic: TCP Connection Reopening Bug in 5.xx?
Replies: 2
Views: 1095

Re: TCP Connection Reopening Bug in 5.xx?

I am having a lot of issues with MT and VOIP SIP .

the phone doesn't even register.

http://forum.mikrotik.com/viewtopic.php?f=2&t=67606
by Maggiore81
Mon Nov 26, 2012 10:21 am
Forum: General
Topic: SIP protocol: I am not able to let it work.
Replies: 9
Views: 2412

Re: SIP protocol: I am not able to let it work.

I tried with wireshark to inspect SIP packets and the source ip / destination are correctly managed. The problem that they goes timeout, with no apparent reason. It happens only when I have a MT device in the middle between: Core router - cisco that does NAT 1-1 only. MT router (routes core-subnet w...
by Maggiore81
Sun Nov 25, 2012 11:47 pm
Forum: General
Topic: SIP protocol: I am not able to let it work.
Replies: 9
Views: 2412

Re: SIP protocol: I am not able to let it work.

Well, I made a lot of tests. Then I may have find a solution: If the MT in the "middle" does only routing and NO NAT, I disabled the helpers (all) and it seem to work. The results are not consistent. I tried to route the subnet from the core router (cisco) to the MT and there do the NAT 1-1 (without...
by Maggiore81
Sun Nov 25, 2012 9:46 pm
Forum: General
Topic: SIP protocol: I am not able to let it work.
Replies: 9
Views: 2412

SIP protocol: I am not able to let it work.

Hello this is my scenario: CORE: Cisco 2651XM, NAT 1-1 with internal ip WAN: 9.9.9.9/24 LAN: 10.0.1.1/24 RB2011 distribution level: WAN: 10.0.1.254/24 LAN: 172.16.0.0/16 The Cisco does NAT1-1 with some hosts in the LAN section. The RB2011 does routing only, queueing. (NAT rules disabled), CONNTRACK ...
by Maggiore81
Mon Nov 12, 2012 10:36 pm
Forum: General
Topic: Mikrotik VVRP with tracking
Replies: 8
Views: 2228

Re: Mikrotik VVRP with tracking

super!
thank you
by Maggiore81
Mon Nov 12, 2012 10:40 am
Forum: RouterBOARD hardware
Topic: RB1200: CPU ETH port, PCIe ETH port.. can someone explain?
Replies: 5
Views: 1102

Re: RB1200: CPU ETH port, PCIe ETH port.. can someone explai

Well... the question is:

Why there is a diagram and they says that the port are working badly ?

Why they included them? :)
by Maggiore81
Sun Nov 11, 2012 10:08 am
Forum: RouterBOARD hardware
Topic: RB1200: CPU ETH port, PCIe ETH port.. can someone explain?
Replies: 5
Views: 1102

RB1200: CPU ETH port, PCIe ETH port.. can someone explain?

Hello I was reading the docs about the RB1200. In the userguide, link is : http://routerboard.com/pdf/308/rb1200ug.pdf I see in the latest page a scheme of the hardware. Port 1 to 5 can be used as a switch (wire-speed I think) 6,7,8 direct connected to the CPU 9,10 are via the PCIe BUS. OK. When usi...
by Maggiore81
Thu Nov 08, 2012 12:57 pm
Forum: General
Topic: Mikrotik VVRP with tracking
Replies: 8
Views: 2228

Re: Mikrotik VVRP with tracking

You can do the same. Run netwatch (or scheduler) to monitor gateway. if gateway is down run the script which changes priority.
Nice! It seems like ip sla feature on cisco.

Do you have an example on hand?

thank you
by Maggiore81
Thu Nov 08, 2012 12:50 pm
Forum: General
Topic: Mikrotik VVRP with tracking
Replies: 8
Views: 2228

Re: Mikrotik VVRP with tracking

Hello. Thank you for your reply. Having Router A and B, each one connected to his line via eth1 interface (for example), my problem is that happens that the interface stays up, but the link is failed. I can check the link functionality via ICMP ping to a remote uplink. With Cisco I do it using "ip s...
by Maggiore81
Thu Nov 08, 2012 11:03 am
Forum: General
Topic: Mikrotik VVRP with tracking
Replies: 8
Views: 2228

Mikrotik VVRP with tracking

Hello I would like to ask you if someone can help me :) I have two routers, in VVRP mode. One MT and one Cisco. Cisco has prio 95 and MT has prio 100. If Cisco detects a down interface (ip sla ...) it lowers its priority. How can do the same in MT too? I would like that MT pings and external host if...
by Maggiore81
Wed Nov 07, 2012 9:22 am
Forum: General
Topic: Conn Tracking tcp timeout setting question.
Replies: 5
Views: 9692

Re: Conn Tracking tcp timeout setting question.

Hello.
But what happens if an user, for example, does an HTTP download that is very long and last for about 3 hours?
If we set the TCP established at 1h timeout, the connection will be dropped at 1h ? Or the counter will be reset if data passes in?

Thanks
by Maggiore81
Sun Nov 04, 2012 10:33 am
Forum: Forwarding Protocols
Topic: Dual Setup with OSPF - Full duplex link
Replies: 23
Views: 12398

Re: Dual Setup with OSPF - Full duplex link

It is possibile to have the remote ends of each router bridged in the same subnet?
by Maggiore81
Sat Nov 03, 2012 6:49 pm
Forum: General
Topic: Trunk port very CPU intensive
Replies: 9
Views: 1231

Re: Trunk port very CPU intensive

I would like to do as much as possibile in hardware and will try to avoid software.
I will use port 2,3,4 as routed ports (access ports) instead than a single port in trunk mode.
by Maggiore81
Sat Nov 03, 2012 6:29 pm
Forum: General
Topic: Trunk port very CPU intensive
Replies: 9
Views: 1231

Re: Trunk port very CPU intensive

So my assumption was correct.
I need to put three routed interface on the RB750 to lower cpu usage.

thank you
by Maggiore81
Sat Nov 03, 2012 1:49 pm
Forum: General
Topic: Trunk port very CPU intensive
Replies: 9
Views: 1231

Trunk port very CPU intensive

Hello I have a RB750 with 5.21 eth2 is a trunk port with 3 vlan on it. I have 3 vlans, about 45 simple queues for 45 users behind it. The RB just routes between VLAN+WAN (eth1), no NAT. using the profiler tool I have cpu usage about 20% on ethernet module. If I set eth2,4,5 as routed ports with a ph...
by Maggiore81
Fri Nov 02, 2012 8:38 pm
Forum: RouterBOARD hardware
Topic: RB2011 performance expectations
Replies: 13
Views: 10224

Re: RB2011 performance expectations

Why a lot of people still uses BRIDGE GROUP that is pure software instead than SWITCHPORTS that is wire speed and in hardware?
by Maggiore81
Sat Oct 27, 2012 1:28 pm
Forum: General
Topic: Question about simple queues
Replies: 7
Views: 867

Re: Question about simple queues

wowowow it works!
I didnt consider the position on queue.

THANK YOU A LOT! :D
by Maggiore81
Sat Oct 27, 2012 11:39 am
Forum: General
Topic: Question about simple queues
Replies: 7
Views: 867

Re: Question about simple queues

Hello. Thank you for your answer. I really like to understand better the queues. My target is to have all the LAN subnet 192.168.10.0/24 to be unlimited in traffic to/from 172.16.0.0/23 (wan side of the router) but limitet do any other destination (internet access). What do you mean on top of the qu...
by Maggiore81
Sat Oct 27, 2012 11:03 am
Forum: General
Topic: Question about simple queues
Replies: 7
Views: 867

Re: Question about simple queues

Hello. It doesnt work as expected. I have a list of simple queues, Dest address 192.168.10.5 (example). limited to 256K/2M they have default priority of 8 I have created a new simple queue: priority 1 dest address 172.16.0.0/23 (wan side of network) unlimited I made a transfer from 192.168.10.5 to 1...
by Maggiore81
Wed Oct 17, 2012 3:21 pm
Forum: General
Topic: Question about simple queues
Replies: 7
Views: 867

Question about simple queues

Hello This is my scenario. RB750GL 5.21 with two interfaces, say WAN and LAN. WAN: 172.16.0.0/23 LAN: 172.16.10.0/24 I have a lot of simple queue with target addess ex. 172.16.10.1 4M/4M 172.16.10.2 4M/256k etc These queues work as expected. I would like to create a TOP queue that doesnt limit traff...
by Maggiore81
Sun Sep 09, 2012 2:10 pm
Forum: RouterBOARD hardware
Topic: Ethernet failures on wireless CPE/AP.
Replies: 7
Views: 1493

Re: Ethernet failures on wireless CPE/AP.

Have you ever tried to use shielded FTP cable with shielded connectors, and a GROUNDED PoE ? For example the 15V or 24V from Ubiquiti works perfect for me.
by Maggiore81
Sat Sep 08, 2012 9:35 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 79052

Re: Mikrotik Router act as a switch and transparent firewall

According to http://www.icplus.com.tw/pp-ip175c.html the IP175C is a switch chip but pratically no. Bah! I won't change the 450 for the 750 because my 450 have 64Mb RAM vs 32Mb of the 750... but the problem of replicated traffic as in a HUB is a really big issue. ANy official response from MT ? I ca...
by Maggiore81
Sat Sep 08, 2012 8:48 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 79052

Re: Mikrotik Router act as a switch and transparent firewall

I really dont know. It is called switch chip!

On the RB750 I have the host table corretly populated.
by Maggiore81
Sat Sep 08, 2012 8:30 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 79052

Re: Mikrotik Router act as a switch and transparent firewall

No.
On the 450 the host list is blank.

I have a 750 configured exactly as the 450, and I see a populated host table.
by Maggiore81
Sat Sep 08, 2012 8:09 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 79052

Re: Mikrotik Router act as a switch and transparent firewall

Yes I see the mac of the FTP SERVER and the client in the ARP list. (wan int) 172.16.0.69/23 (eth2) master port of eth2,3,4,5 172.16.6.254/24 RB450 is doing only routing, no NAT. -ftp server is 172.16.0.204/23 (there is the mac in the arp table) client is behind NAT of 172.16.6.203/24 - cisco 851w (...
by Maggiore81
Sat Sep 08, 2012 7:43 pm
Forum: General
Topic: Mikrotik Router act as a switch and transparent firewall?
Replies: 41
Views: 79052

Re: Mikrotik Router act as a switch and transparent firewall

I agree with the post where is said that the switch is acting as a HUB. I have a RB450 with 5.20 I created one wan port (port1) and a switch for port 2-3-4 (master port eth2) the problem is that is acting as a hub, with the traffic replicated on all ports. I have a ftp download from port 2 to an hos...
by Maggiore81
Wed Sep 05, 2012 6:24 pm
Forum: General
Topic: Load balancing between MT DNS
Replies: 2
Views: 625

Re: Load balancing between MT DNS

Thank you.
Me too thank about the VVRP load sharing example. It is not "native" as GLBP but it could work.

Thank you
by Maggiore81
Sun Sep 02, 2012 11:55 am
Forum: General
Topic: Load balancing between MT DNS
Replies: 2
Views: 625

Load balancing between MT DNS

Hello I would like to achieve the following scenario: a) MT RB750 b) MT RB750 c) MT RB750 RouterOS 5.20 is used. each of the RB act as DNS server with cache on it. I would like to create a virtual IP between the three 750s, so clients can do DNS request against them, and if one of the a,b,c router f...
by Maggiore81
Sat Apr 21, 2012 7:28 pm
Forum: General
Topic: MT as network's DNS cache
Replies: 1
Views: 496

MT as network's DNS cache

Hello I have found very useful the dns cache feature of MT. I would like to ask you this: In the network is possible to have multiple RB that works in redundancy mode (as HSRP for example)? I have seen that MT has VRRP. I would like to have multiple MT in the following structure: MT#01 Real IP 192.1...
by Maggiore81
Sun Apr 15, 2012 12:12 pm
Forum: General
Topic: Hot-Spot login page on esternal server - Windows server
Replies: 2
Views: 648

Hot-Spot login page on esternal server - Windows server

Hello I have a RB450 with the latest 5.x software on it. I use the internal splashpage for hot-spot authentication and it works fine. I would like to redirect all the auth system to my external page on my webserver (SSL secured) I currently use HTTP-CHAP only auth. I have read the WIKI but I am not ...