thanks @normis . Is it safe to assume the temp reading (although may not be 100% accurate due to the sensor you mentioned in another post about temperatures) on the Routerboards is of the CPU inside the casing? If our ambient temperature is only ever high when its 35 Degrees, and perhaps in a rare c...
Hi guys, I've seen a few topics regarding router operating temperature. What what i've seen from routerboard.com and these posts is that the router is capable of operating from -30 to 70 Degrees (seems 90 is the upper limit before the router may stop functioning correctly or crash). Although the ope...
Hi Everyone I have over the last 6 years been using the Dude as my main NMS and it has been working great. However recently we have been having the dude server crashing. We used to run it on Windows on version 3.x.x, we have moved to dedicated routers and now most recently upgraded the an RB1100AHx4...
I currently cannot log in via any service including mac-telnet. When i telnet in i am not even prompted for credentials, instead the following happens and i am disconnected.
This is the strangest thing i have ever seen form a Mikrotik
Has anyone else had the problem where a UBNT Radio and Mikrotik have the same ARP in the Mikrotik ARP list. See screenshot below I have tried * Upgrading Mikrotik Software and Hardware * Upgrading UBNT Devices * Removing ARP Entry (it just comes back) * Making the ARP Entry for the Mikrotik static N...
Okay so a large high-site was down this morning and when it came back up i have a router where 60% of the routes are only populated. This time i didn't fix the problem, seems the rest of the routes came through a few minutes later. I will see if this is the case with all sites, maybe i am being impa...
I have searched through the forum to find any similar topics but cannot find any. My issue is with OSPF sites that are newly commissioned onto my network and also sometimes with routers that have rebooted (due to loss of power or other issues). In both cases, fresh installation and rebooted router t...
Hi I was considering if my CRS i have installed is suitable for my needs and looked up the performance and cost. I currently have the "CRS125-24G-1S-RM" installed and was looking at the most expensive CRS router the "CRS226-24G-2S+RM". They have added an SFP port but reduces the ...
Many people have offered Mikrotik money for The Dude as a supported products they provide. They declined. The Dude has and always will be an unsupported product from Mikrotik. If you need a proper NMS you should look elsewhere. The last time The Dude was updated (which is still a beta release) was o...
I have setup a hotspot on an interface that has 2 IP ranges programmed. - HotSpot range 192.168.16.0/24 - IP Camera range 172.19.0.128/27 I'm trying to exclude the second range from being caught by the Hotspot. For this i have done an IP Binding with "bypassed" as the field. This is howeve...
I have seen a few threads relating to MTU size for MPLS and for VPLS but for my specific scenario. I plan on running VPLS based BGP. From what i have read up on the following below is ideal MTU Size <Ethernet><IP><BGP><VPLS><Data> 14 + 20 + 4 + 4 + 1480 =1522 MTU Is this correct?
Hi Guys Wanted to check if anybody else is having this problem of SNMP not working even when using default public settings with no authentication. See below the settings on my router as well as a the SNMP log on the mikrotik showing no errors or authentication failures. I cannot pull SNMP informatio...
Not so fast. Some new hope did appear during the MUM. I would like to see something fruitful to this statement as we all know well that Users have been requesting and complaining for over a year. Why does it take a face to face MUM for something to happen. The Dude was also made a topic during the ...
>OpenVPN server doesn't work! Clients log off immediately after connection establishing. Downgrade to 6.7. Can confirm. Same goes for PPTP. I can also confirm issue with VPNs: - SSTP from MK 6.9 -> MK 6.7 (server) is working - SSTP in other cases = not working - OVPN = not working Downgrade back to...
Hi I'm not sure why this topic has not been logged before, or if it has been previously addresses by Mikrotik but the Logging for MPLS and LDP Protocols do not work. If you log to disk, memory or echo nothing is displayed when working with these protocols. I recently attended the MTCINE training and...
Hi I have read multiple threads about people trying to throttle an EoiP connection. The only thread that seemed to have the right direction was suggesting to "use IP FIREWALL" on the bridge interface settings. This made sense as when you create an L2 bridge none of the traffic is passing t...
@ djvook LTE is not a PPP dialer, it is a seperate interface that you need to create. You also then need to add a DHCP-client onto that interface for LTE to work.
Please create a seperate thread as this topic is specifically to do with Sierra Wireless MC7710
Thanks Uldis, I have returned the modem to my supplier who will in turn send it to Sierra Wireless to be upgraded. A very long way round but at least its getting done.
I have upgraded many routers in my time but never a 3G mini-PCI card. I understand i need a Windows PC but what else? What are the steps i need to take in order to upgrade this modem.
Hi Guys Please take a look at the crash log below. This is happening almost on a daily basis now. I have vacuumed my database but this has not helped. I have also increased the RAM on my machine to double. Please see the crash log below http://i.imgur.com/PNuHUUY.jpg .0beta3 ACCESS VIOLATION at: 44d...
Hi Normis thanks. The reason I use this type is because it more accurately limits the connections that i set to that speed. When using default or default-small I found that the traffic would not hit the exact limit but rather sit 80-90%. Do you know if this is common or if anybody else has had issue...
Good Day I have sent an e-mail to support@mikrotik.com but without any feedback I am currently trying to register an account with bjorn[at]cmtec[dot]co[dot]za and but I do not get the registration confirmation e-mail. I have checked my junk mail folder to no avail. Please could you check https://www...
Hi Everyone One of my suppliers recently stopped supplying the Mikrotik RB750s with the usual power adapter which come inside the box. Instead they supply us with their own power adapters which are 12V / 2.4A . I am now worried that they may blow the units or cause hanging up (as I have read in othe...
Hi I am trying to setup the same squid on openwrt to allow HTTPS proxying on-site. Has anybody gotten this working? I have gotten squid installed with basic squid.conf but when I try to start the squid process i receive the following error below relating to libpthread which I have no idea what it me...
I'm trying to create a script which will report the # number hop in a traceroute. I have managed to get the router to display the entire traceroute but for this purpose I only want it to show "GATEWAY = _______" in the device label See the command I have created already " [oid("1...
Hi Guys I've upgraded many many routers but I am having a strange problem with this one. As soon as I start to copy the upgrade file I get "router disconnected". I have tried to do the upgrade after rebooting the router but with no avail. Anybody had a similar problem? Is the router perhap...
I would also like to know if there are any LDP or MPLS bugs in router OS? We are not able to try to debug without the logging.
Settting up LDP between routers, some work fine. But on others the LDP neighbor keeps dropping and re-appearing. Also static routes seem to be ignored when LDP comes up?
Hi I cannot for the life of me remove this dude 3.6 package from my router. I have tried disabling it, I have tried uninstalling it. Everytime after the reboot the file is still there? Has anybody had this issue or managed to resolve it? It is taking up my Hard Drive space on the router so I cannot ...
Good Day I am having some problems in the last month where I am monitoring the "ping" probe on my devices on a large Wireless Network. The Dude sometimes thinks they are unreachable, but If I do a ping from "local" I can reach it. The ping from "server" and from "l...