I have tried different variations of the files. only the main package, only additional packages, the sum of these packages - the result is always the same. I can not remove the extra packages, I can not turn them off. device does not respond to my action. Now I'm trying to make export settings to a ...

This is a good developer's reply - do not install something of what we develop, because there may be conflicts. And where is this warning on download page? or in packages archives? And very competent advice: reset the device and reinstall it via NetInstall. You sell SOHO routers or CCR is this carri...

I can not remove the disabled packages. after rebooting packages that were marked to remove remain in disabled state.

I have no problem with the free space on a disk, I have a problem with the update ROS.
In addition, there is one more CCR device with version 6.23, which is also not updated to version 6.29.1.
If I remove the extra packages, that will help me to upgrade to the required version of me?

I can not update the device from version 6.27 to 6.29.1 I tried to remove all files from the disk and load the new version. I tried to update the section System - Check for update, but in any case the device after the restart remains with version 6.27. > system package update upgrade current-version...

We recently purchased another ccr-1036. It worked in production 2 days, and then we see this: 1. When connected to any of the device ports we can not connect to it through wibnobx\ssh\telnet. 2. LCD screen shows that port without a link, although there is indication on the port and a graph of the in...

Another problem.I want to redirect iptv to the pptp user .Adding user manually is not a problem, and TV works. http://s48.radikal.ru/i120/1305/e2/d418a7ff717b.jpg BUT! If the user turns off and on, the interface is not added automatically, I see a message "unknown interface" (but the user...

Hello everyone. I install routeros v6.0 on my RB911G. with winbox. but after reboot my router stop working, boot fail ! I can't access to it with winbox or.... no ip , mac address... RB911G doesn't have reset button.how can I use netinstall?! any other way? you can try use reset ring on board: 1.jpg

But think realistically - they will not be able to solve all your problems there, you still need to do it the usual way - problem description, debug logs, supout.rif files, serial console printouts and maybe even full access to problematic board. all that we do, but we can not keep our customers on...

board-name: CCR1036-12G-4S version: 6.0 7 February we opened the request [Ticket # 2013020666001015]. At that time was RouterOS 6.0R7. We had two units. One of them worked fine, another was freezing every 3-4 hours. We were forced to remove it from service after 1 mounth of work mikrotik support and...

hello mikrotik team,
Is the problem solved for Ticket#2013020666001015? we had to remove the device from the production and could not further diagnose the problem, since the problem on the test bench do not reproduce.

hello,
please, check mail about [Ticket#2013020666001015], we have made access through rs232 port another mikrotik, and get supout.rif at the moment of freeze.

nothing has changed in rc10. 5-4 routing freezes and not available ssh\winbox services a day. maximum 11 hour uptime.

we did find some significant issue and fixed it, please try todays build: http://www.mikrotik.com/download/share/routeros-tile-6.0rc10.npk thank you Normis, we already installed it 10 minutes ago(Feb/15/2013 10:47:45), your debug packet was deleted before it. we mail supout files if problem continues

Ansy, Bakula, Jetrider, please write to support with information how we could connect to your router with Winbox and test this.

Ticket#2013021366000842
video + supout.rif + access to demo router

replied. looks like issue is fixed in rc10

this problem Ticket#2013020666001015 fixed in rc10?

Hi all, We bought two CCR1036, both at about the same load and use the same function, but one of them has 21 days uptime (ros 6.0rc7), and another 3-4 times a day at random freezes(6.0rc7-8-9). at the time of freezing, we can not get access to the device through ssh \ telnet \ winbox, routing throug...

please help!

and specify the ip address in the EXEPTION_1

All remove and recreate by the description: http://wiki.mikrotik.com/wiki/Manual:Multicast_detailed_example Router A ether1 to User ether2 to Router B [admin@MikroTik] /routing pim> interface print Flags: X - disabled, I - inactive, D - dynamic, R - designated-router, v1 - IGMPv1, v2 - IGMPv2, v3 - ...

Hi, There are two abstract network. one is the source of IPTV. is a problem: multicast routing from one network to another. Drawing1.jpg At the IPTV server default gateway 192.168.10.1 238.1.1.0/24 - multicast addresses Router A [admin@MikroTik] /routing pim> interface print Flags: X - disabled, I -...