MikroTik

armandfumal

Hi, We have an Ethernet(Gpon) with 1Gbits/200Mbits profile connected on ETH1. We can't go more than 600MBits, after investigate, we have tons of RX drop on eth1 when we pushed at 1Gbits. Same config on CCR 1009 don't have this issue. both are 6.47.7. seems buffer issue on hardware eth1? any idea ? C...

armandfumal

we have the same since we have upgraded to 6.47.1.

seems Dude change the way to communicate with monitored device. It login, collect data and then close...

the monitord device has now polution about login/logout....

armandfumal

Hi all,

Does anyboday can share his experience if this feature are running ok at this time ?

regards

Armand

armandfumal

I vote +1

armandfumal

you have to active in Esxi Promiscuous mode

armandfumal

check video in attach, less than 5 secs...

armandfumal

Hi,

try Hyper-V a lot faster than Xen with CHR.

performance order: Hyper-V, Xen, VMWare....at the moment...

regards

Armand

armandfumal

https://www.nxp.com/products/processors ... or:LX2160A

armandfumal

url_encode();

armandfumal

https://www.engadget.com/2018/03/11/sop ... h-routers/

How to protect from that ?

regards

armandfumal

thank you for the clear explanation...I will try

armandfumal

ok, I will try via Support...let's see

armandfumal

Hi, We have a PMTP link clear line of sigth, 200m mANTBox 19S as AP SXT5ACHG as cpe QRT5AC as cpe. we have a performance problem. link at 866Mbits sync. we have with embedded bw test tool from CPE to AP the value of 300Mbits in UDP and 190Mb in TCP in booth direction. we can't have more. we try at 2...

armandfumal

*) chr - added "open-vm-tools" on VMware installations;

tested. at least !!!

thanks

Just missing BGP routing in multicore cpu....need this please !!!!

armandfumal

Hi,

Do anyone know when Mikrotik start RC ?

It is a pain to works with BGP to make query...need multicore process usage for routing...

I know that a lot of people ask for but may be a roadmap will be usefull...

thanks

Armand

armandfumal

Hi,
in 6.36 it is not possible to contruct a panels. when you design with charts. It didn't saved it. you come back to the panel and it empty.

regards

Armand

armandfumal

Hi

Concern import/export DB

I have my 50Mb db from 4.0b3.

I would like to import to 6.35.rc12

I have try to import in cli. the command is accepted but nothing is done. and get Import done but nothing was done...
no errors...

what's wrong

Armand

Resolved. sorry I found

armandfumal

Hi

Concern import/export DB

I have my 50Mb db from 4.0b3.

I would like to import to 6.35.rc12

I have try to import in cli. the command is accepted but nothing is done. and get Import done but nothing was done...
no errors...

what's wrong

Armand

armandfumal

Hi,
I cannot upgrade ROS device with OS more than 6.24 version. I have an unknown package error ?
any idea ?

armandfumal

Hi all, I try to use S-31DLC20D on a SFP+ port: SFP is recognized Link is ok. TX data go out but no RX data is coming.... Using the same module on a SFP port is working correctly tested on CCR1036-8G-2S+EM and CCR1036-12G-4S-EM tested on RoS 6.27, 6.28, 6.29RC24 Any idee ? or bug ? regards Armand

armandfumal

Hi all, Upgrade to 6.28, CCR1036 after 20 mins my BGP config disappear, no more instance, no more config possible. autosuppout created. reverse to 6.27 resolve the problem. ticket created at support. anybody has the case ? regards Armand What model? I have only some CCR1036-12G-4S and no one have t...

armandfumal

Hi all, Upgrade to 6.28, CCR1036 after 20 mins my BGP config disappear, no more instance, no more config possible. autosuppout created. reverse to 6.27 resolve the problem. ticket created at support. anybody has the case ? regards Armand What model? I have only some CCR1036-12G-4S and no one have t...

armandfumal

Hi all,

Upgrade to 6.28, CCR1036
after 20 mins my BGP config disappear, no more instance, no more config possible.
autosuppout created.
reverse to 6.27 resolve the problem.
ticket created at support.

anybody has the case ?

regards

Armand

armandfumal

I am only using ospf 2, i could not even reach the router, was pinging it with very high latency, but returning to old firmware it came back to normal operation, i am still trying to see what happened, as i tried with a test router and all went ok on a smaller network.

check the log...

armandfumal

I tried to update my router, which had ospf, and it totally went crazy, till i returned to 6.37, not sure what happened to this CCR, but careful while upgrading. i was interested in the route fix. !

have the same, I resolve the issue by correction of an mistake of myself about routerID in OSPFV3...

armandfumal

Sorry I didn't have time to do full packet captures during the times it was not working. Just too much, too fast, and too critical to leave it not running. To confirm the above question, it's a *complete* break. So nothing registers at all. It's not as if it partially registers, or registers for a ...

armandfumal

+1 Votes to Multi-threaded route information processing.

and real tools for IT to manage BGP prefixe in real time...

armandfumal

Thank you for the update. (I am posting this here because if it is a valid bug, I do not want it sneaking into 6.28, I would rather it be fixed first) I have a small bug I encountered with a CCR1036 and I am unsure if this is a config issue. I replaced a RB-1100AHx2 with a CCR1036. RB-1100AHx2 was ...

armandfumal

upgrade to 6.24 release successfully. no issue found at all.
Using GRE, EoIP tunnel, OSPF...

armandfumal

Wir haben tagelang nach dem Problem gesucht warum man ab dem Firmware 6.20 keinen Download über 500k mehr bekommt, aber Upload bis 50 Mbps. geht. Das Geheimnis die Firmware 6.20 bremst die pppoe Session dermassen aus, dass es kaum noch Webseiten öffnet. Den Stand auf 6.15 herunter nun geht es wiede...

armandfumal

The technical specification looks very promising. There is also question about the price and implementation / development costs. I am looking forward to see the jump in mikrotik devices performance while the price will be constantly going down. EZchip has acquired Tilera, so now Tilera customers(MK...

armandfumal

http://www.ezchip.com/Images/pdf/NP-5_S ... online.pdf

armandfumal

And for me as you can see in the graph is not stable. I uwielu people also is not stabile, that in itself is already available 6.20rc shows that there are errors. Apparently, your network will not fully benefit from the opportunities mikrotik. I lite5 restart once a day, so do not tell me that it i...

armandfumal

Winbox v3 is required for router’s configuration. Welp... no more rc testing (or upgrading, for that matter) for me then... I'll stay on 6.18 on all of my devices, since EoIP (which I use it a lot) is broken on 6.19. 6.18 was a great release (the first really stable and usable one with no major bug...

armandfumal

t's terribly sad that we have to pay for underdeveloped software.
Also a shame that mkrotik tests its software on the clients

It is your choice. You can also go to Cisco and pay thousand euro for the device and many more for the service...
MKT do a very good job...

armandfumal

future

at least...

armandfumal

does anybody know when will be available ?

armandfumal

filters mechanism in mikrotik is not intuitive and need to create large quantity's rules for more complex solution, for example what I do in the bird several entries (in filters) in the Mikrotik often I have to create tens (i think that filters must by like cisco/bird style) another problem ... for...

armandfumal

I have backup of the config, that is uploaded to ftp each day

but it is to recover access to the device...

It is not an emergency because the device is still running ok. but in the future I will have somme trouble to manage it...

armandfumal

Normis,

so we need this feature for the future in the routerboard firmware

Doing an tftp check on specific ip add at start....to reset the unaccessible device...

armandfumal

If I have to...
I need a lift, I would like to avoid that...

armandfumal

normis,

at the moment, BGP management is very awfull, just to search a specific route...

for day to day management, old cisco do that instantly, MKT take 5 mins to search a subnet...

sorry, BGP cli tools must be optimized...

armandfumal

I try mac telnet from wireless and ethernet, no way...
winbox also
telnet...

nothing...

I just want to know if in the routerboard(bootloader) there is a possibility to do an tftp or other method...

armandfumal

Hi all, I need help. Due to a missconfiguration, I loose access to a SEXTANT, no more possible to telnet, winbox or mac-telnet. But the device still running correctly in bridge. Is it a way to reset the device? without physically access due to high mast mounting. Is it a way to netinstall with an de...

armandfumal

no pppoe at the moment, after It will be.

for now only bridge network in NV2 and WDS...
one network bridged...

I put 1600 mtu on wireless link interface and for the rest, all is in 1500mtu

armandfumal

Hi, I have a case that I can't resolve. MKT 1100AH2 as main router, eth1 is connected to fiber with internet 50M/50M, Is masquerading the internal network. surfing to internet from mkt 1100, performance 50/50 is ok. I have an internal link with 2 SXT, bandwith test between the 2 sxt is about 130Mbit...

armandfumal

PROBLEM REPORT Hi all, we are facing to CPU usage problem, all core are used to 50% at the same time every 10 sec. We found that is DUDE using snmp query that causing that. stopping DUDE to use SNMP resolve the problem but I can't monitor cpu (graphing in dude) without SNMP. And in profiling the cpu...

armandfumal

DHCP on VLAN was also working on 6.11.. I am using it right now without problems. I reported that back in 6.11 released topic..

same for me DHCP on vlan is working for me...

armandfumal

http://www.qualcomm.com/media/releases/ ... mimo-wi-fi

armandfumal

NTP client works fine after upgrade. Please check if the NTP server IP isn't changed. IP of NTP server didn't changed, and after i found problem, i tried change IP to new. In 6.07 work fine. We have 2 of 751 and 3 of 951, every have problem with NTP Client. I'm using 6.10 on RB951, no NTP problem...

armandfumal

Hello, I am interested in status of IPSec hardware acceleration. In the beginning of this topic you have mentioned that this will be available soon. Today I have tested to encrypt traffic between two CCR1036 and the best result was about 300Mbps. Regards, Which version of RoS? 6.10 support hardware...

armandfumal

Hi all, Here is a shared experience with CCR1036-12G-4S I was running 6.10, I would like to upgrade to 6.11RC1 of 6 March. Upgrade was ok. all running. After that I decided to upgrade Routerbord from 3.10 to 3.12.(bad idea) After the needed reboot the CCR was bricked. I take a new one fresh from the...

armandfumal

Hi,

anybody has experience for installing RosAPI & Synapse under XE5 ?

regards

Armand

armandfumal

You can not storage directly print output _as file_ to variable. Also you can not storage directly "ping" results inside a variable, except for count of positive response. /ip neighbor print file=tmpWork; :local output [get tmpWork contents]; :put ("Results: ".$output); If you l...

armandfumal

Hi, could anyone help me :local output [/ip neighbor print count-only] :put ("result: $output") in this case value is stored into $output but :local output [/ip neighbor print] :put ("result: $output") not this command, the content of print is not stored into the variable? What I...

armandfumal

Hi,

I would like to match DNS query for domain that start with 3 numeric follow to 3 non numeric follow with .com

I try this : \d{3}?\D{3}?\.com
to match 515kkk.com or 202aaa.com...

But It not maching in my rOS.

need help

thanks

Armand

armandfumal

BUG report Version: 6.9 30/01/2014 13:02:02 plateforme: RB1100AHX2 DateTime in log is not logged with current system time. It seems recording in GMT Instead GMT+1 in my case... do you have DST maybe ? Normis, the system clock is ok. but when line appear in the log, the time is not the same as curre...

armandfumal

BUG report
Version: 6.9 30/01/2014 13:02:02
plateforme: RB1100AHX2

DateTime in log is not logged with current system time. It seems recording in GMT
Instead GMT+1 in my case...

armandfumal

when comes 6.8?

when it is done

I'm running the 6.8RC1 in prod, no issue found in my case, using : BGP, OSPF, IPV6, SNMP...

armandfumal

PPPoE users are authorized to RB1100AHx2 through Radius request to billing. Found that RB1100AHx2 not send requests (Accounting-Update) on billing. Billing believes that the user disconnected and hang PPPoE session. In the settings billing parameter "Timeout hung session (s) = 60 sec". If...

armandfumal

What's new in 6.8rc1 (2014-Jan-21 11:25): *) wireless - improved 11n and nv2 stability; *) dhcp client - support interfaces in bridge; *) dhcp - parse decimal strings and IP addreses in options value; *) bgp - don't show community 'internet' in BGP advertisements; *) ipsec - enable hardware accelera...

armandfumal

Is anyone successfully monitoring a CCR with SNMP ? We have been holding back on this on our production units as I recall there were wide spread issues with this causing performance issues previously. We have several CCR1036 and RB1100AHx2. We monitor those routers with SNMP without performance iss...

armandfumal

What's new in 6.8rc1 (2014-Jan-02 09:46): *) bgp - don't show community 'internet' in BGP advertisements; *) ipsec - enable hardware acceleration for aes-cbc-128 + md5|sha1|sha256 aead on tilera cpus; *) ospf - fixed checksum calculation for OSPFv3 AS-external-LSAs; *) default configuration - change...

armandfumal

Sharing my experience: Upgrading My CCR to Ver 6.8RC1 of 19/12/2013 all seems runing ok, BGP, OSPF ... loaded 3 x BGP upstream provider with 470000 prefixes each in 2 minutes 11 secondes... Cool :D Please share more of your experiences. So does it mean BGP process runs on multicore? Do you have IPS...

armandfumal

Sharing my experience:

Upgrading My CCR to Ver 6.8RC1 of 19/12/2013

all seems runing ok, BGP, OSPF ...

loaded 3 x BGP upstream provider with 470000 prefixes each in 2 minutes 11 secondes...

armandfumal

Xtables-Addons with GeoIP for Firewall

+1

armandfumal

Hi,

any news about evolution of bgp multicore ?

thanks

armandfumal

What's new in 6.7 (2013-Nov-26 09:57): *) poe - new poe controller firmware for RB750UP and OmniTIK UPA; *) ipsec - added aes-ctr encryption mode; *) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold; *) ipsec - added sha256 and sha512 support; ...

armandfumal

I had two CCR's doing this port flap. In both cases all active ports would flap. I checked further and found on both units there was at least one device connected that was NOT set to Auto-Negotiate while all CCR Ports WERE set to Auto-Negotiate. Have now set the appropriate ports to fixed 100Mbps/F...

armandfumal

What's new in 6.7rc1 (2013-Nov-20 14:13): *) dhcpv4 server - added REMOTE_ID option variable for relayed packets; *) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter; *) userman - fix crash on tilera; *) fixed hairpin nat on bridge with use-ip-firewall=yes; ...

armandfumal

Which version are you running ? check: What's new in 6.7rc1 (2013-Nov-19 11:17): *) ipsec - fix policy bypass on IPv6 gre, ipip, eoip tunnels; *) userman - fix crash on tilera; *) fixed hairpin nat on bridge with use-ip-firewall=yes; *) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac ...

armandfumal

working perfectly

thanks

armandfumal

i'm not on the console but behind this interface, not a good solution

armandfumal

Hi,
I remove by accident my auto generated link local addr on my interface.
Is it a way to re-generate it without reboot ?

And this action is not in undo history

thanks

armandfumal

I changed, I move internal routing in ospf and then redistribute in BGP...

armandfumal

redistribute other bgp is only annouce other prefixe learned by other instance ...

armandfumal

armandfumal

ok thanks

armandfumal

armandfumal

Wispwest: For running multiple BGP feeds, CCR runs like a Champ. However, if getting full routes, route updates for full tables may be a little slow. That's the only issue we had found. Could you tell us please how many full BGP tables you have and how long you update full table? For RC software it...

armandfumal

Hi, I need help for a simple case. I have 3 routers: R1 <-> R2 <-> R3 all same AS Static route on R1 advertised to R2 in R2, route seen with "Db" attributte but R2 do not adverstise the route to R3. Why "Db" route coming from R1 is not advertised to R3. and R3 cannot reach ip fro...

armandfumal

What's new in 6.7rc1 (2013-Nov-11 15:04):

*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;

armandfumal

BUG REPORT Ros 6.6 Routerboard: 3.10 Platerforme: RB1100AH2 Something has changed about Vlan because when I upgrade from 6.5 to 6.6, I loose Vlan to ethernet. but I found a workaround to stay in 6.6 previous config in 6.5, I have a bridge, vlan30 created on the bridge, ethernet7 in the bridge, so vl...

armandfumal

What's new in 6.6 (2013-Nov-06 17:09): *) winbox - fixed problem where all previous session opened windows were read only; *) certificate - no more 'reset-certificate-cache' and 'decrypt' commands, private keys can be decrypted only on 'import', use 'decrypt' before upgrade if needed; *) fixed arp-r...

armandfumal

Chupaka,

thanks

6.4 problem solved
now it is ok..

nothing about that in the release note

armandfumal

any devnote of the 6.4 somewhere ?

armandfumal

Why searching about the cable tested OK with Flupke.
was running ok from 5.24, 5.25, 6.0, 6.1, 6.2 and now with 6.3 the problem appear at this time.
I reverese to an old version and the problem disappear...

The problem is clear...and reproducable...

armandfumal

I have the problem in 10Mbits & 100Mbits...

armandfumal

with 6.3 we expect some problem of duplex on ethernet on plateforme 2011 and 1100AHx2.
if the duplex is manualy setup. the MKT not go to full duplex. and go to half duplex and the bad thinks with it...

back to 6.2 resolve this issue.

armandfumal

BUG REPORT

Platerform: 1100AHx2
Router OS: 6.3 30/09

Ethernet link in 10Mbits is not possible in Full Duplex. fixed manually without autoneg. both side for sure.

Working OK in 5.25 & 6.2

armandfumal

Have tested 6.3 29/08/2013 12:06 Build on CCR1036

I see a gain in BGP loading prefix. Now I have loaded 458000 prefixes in 50 secondes... much better

still on one core but better performances.

good job.

armandfumal

For those using 6.3RC1, new release out 28/8/2013 12:32:24 change since the 22/08: *) console - added '/console clear-history' command that clears command-line history for all users, requires 'policy' policy; *) sstp - limit packet queue for each device; *) RB2011L - fixed occasional gigabit switch-...

armandfumal

Press … and select the MAC Address directly, then connect.

ROS 6.2 and CCR1036

same for me. I can't connect with winbox and mac, even mac server configuration correctly configured

armandfumal

IP route is not working with sfp interface.

be more precise. plateforme, Ros version, etc...

On CCR-1036 with 6.2, It is working for me.
regards

armandfumal

6.2 BUG REPORT

plateforme RB951G

Reset counters on ethernet interface does not works
winbox and cli

armandfumal

6.2 BUG REPORT plateforme RG951G tool graphs: Flags: X - disabled # INTERFACE ALLOW-ADDRESS STORE-ON-DISK 0 ether1-gat... 0.0.0.0/0 yes not store on disk. only in memory. When I reboot, I lost all graphs... Armand

armandfumal

Packet sniffer does not seem to work in 6.2. (No packets results show)
6.1 works fine.
(RB433AH)

works ok on RB951G with 6.2

armandfumal

Feature Request for 6.3

adding the possibility to execute script with parameters
/system script run script1 $1 $2 $3 $4

thanks

Armand

armandfumal

BUG report

V 6.2 release

editing hotspot user profile, setting incoming-filter and outgoing-filter in winbox does save it correctly.

console ok

armandfumal

Normis. Making a query to search for a prefixe that take more than 2 or 3 mins is not acceptable

For network engineer is a day to day task. When you have to solve a routing issue with ccr it is a pitty

On my old cisco these tasks are in real time.

Envoyé depuis mon GT-I9505 avec Tapatalk

armandfumal

to avoid this type of problem, I think MKT should not naming pre release with the same name as final build
the only way is to check the build date...no build number exist...

armandfumal

BGP multicore become a hurry...
I use BGP with 3 full feed. It works but BGP handling is very slow...
route query take 2 mins to seach a prefixe...

armandfumal

no problem here

sw.JPG

armandfumal

Hi all,

How to set localpref for prefixe coming from AS9269 coming from a carrier

chain=BGP-IN bgp-as-path=9269 invert-match=no action=accept set-bgp-local-pref=105 set-bgp-prepend-path=""

?
regards

Armand

armandfumal

Sorry I miss some explanation, I would mean Router OS devices backup monitored by DUDE...

armandfumal

Hi,

Dude must be able to backup/export running config to save it locally...

It would be nice

))

Armand

armandfumal

Edit sensor. In parameter you can override parent value...

armandfumal

We are in zagreb. So let see

Envoyé depuis mon GT-N7100 avec Tapatalk

armandfumal

bug report:

RC11
LCD info slideshow, fan & fan2 to 0 rpm....

armandfumal

Hi,
Is it normal that In ressources IRQ, the fancon is generating about 1100 irq per second ?

6.0RC8 25/1/2012

armandfumal

Hi,

bug report in 6.0RC8 of 25/1/2012 16:30 download.

Installed 16Gb RAM Kingston KVR1333D3S9/8G * 2
the memory is detected correctly everywhere, but on the LCD 3.6Gb left only on screen...

Router seems to run correctly...

thanks

armandfumal

The device is new. Still in devel...that's why this is a RC version of ROs...so we need to help MKT to fix software issue...I m sure at the end this will be a good one...

Envoyé depuis mon GT-N7100 avec Tapatalk

armandfumal

Yes
Create vlan
Create bridges
Create Virtual ap
Put ports un bridge

And mkt magic

Envoyé depuis mon GT-I9300 avec Tapatalk

armandfumal

Ok with prefix-length set to 20-32, it is working how I would like. add action=accept chain=BGP-filterOut prefix=213.177.64.0/19 prefix-length=20-32 add action=discard chain=BGP-filterOut result: sh ip bgp neighbors 213.177.66.194 received-routes BGP table version is 21750285, local router ID is 213...

armandfumal

I just want to redistribute the connected prefixe under my /19 without adap the filter. Today it is working just with my filter but with rules with /19 all prefixe are announced but also a prefixe with my whole /19 that i don t want. Need only the 3 connected prefixe....

Thanks

armandfumal

Thanks.

With this rules, it announce the three Prefixes but also the whole 213.177.64.0/19 that I don't want...

I want only the 3 prefixes...

thanks

armandfumal

Hi all, I'm not good with filter, here is my case. My network 213.177.64.0/19 between RB1100AH2 and Cisco 7206VXR I woudl like to redistribute connected route. It is working but I can't make a good filter from Mikrotik to control what it is send to the 7206. today I have these working lines to annou...

armandfumal

ok thanks

armandfumal

this config is just like a normal bgp connection?
nothing diffrerent ?

is cisco, you have a config like: neighbor {ipv4-address | ipv6-address} route-server-client

thanks

armandfumal

Hi,

Is it possible to connect to an public IX router server with RouterOS?
Can I make a BGP connection as route-client ?

sample config ?

regards

Armand

armandfumal

I successfully replace 7200VXR-NPE-G1 by 1100AHx2 at 1333MHz...with several bgp feed with 400K routes...on Gigabit connection...load 30% cpu at 300Mbits

armandfumal

Hi all,

So now in the real environment, all is ok.

thanks for help

armandfumal

Hi,

Is it possible that Router OS is doing load balancer function for application.
Like Fortinet load balancer ?

Need to load balance smtp server, for redundancy and performance...

regards

Armand

armandfumal

status: connected-to-ess band: 5ghz-n frequency: 5200MHz wireless-protocol: nv2 tx-rate: 150.0Mbps rx-rate: 180.0Mbps ssid: WISP-Cybernet-1 bssid: 00:0C:42:6D:A0:FE radio-name: 000C426DA0FE signal-strength: -44dBm signal-strength-ch0: -46dBm signal-strength-ch1: -47dBm tx-signal-strength: -42dBm tx-...

armandfumal

I found

in the winbox, interface wireless, HT MCS, they are only MC0 to MC15
in the webif they are MCS0 to MCS23, I click all to MCS23

and now it is better, go up 180MBps in the lab.

bug ou version of winbox ?

armandfumal

802.11N
NV2 802.11
5.15

Both sextant is in a lab 3meters, signal full
may be to close ?

armandfumal

Hi,

I use 2 sextant with bridge and stations WDS

the best link speed in lab is 6Mbps/6Mbps

I have selected 20/40MHz HT above.

What's wrong ?

thanks

Search found 127 matches