Community discussions

MikroTik App

Search found 116 matches

by RcRaCk2k
Fri Dec 22, 2023 10:30 pm
Forum: RouterOS beta
Topic: vxlan performance?
Replies: 29
Views: 17961

Re: vxlan performance?

So as there is no VxLAN with Hardware Offload available for CRS317, because of leak of software side support...

What is the correct way with CRS317 to tunnel sfpplus10 on SW#1 (CRS317) to sfpplus10 on SW#2 (CRS317) on Layer3 with wirespeed?
by RcRaCk2k
Mon Dec 18, 2023 9:04 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 58
Views: 40138

Re: BGP ECMP (multipathing)

7.13 Stable out now, NO ECMP Support
by RcRaCk2k
Fri Nov 10, 2023 4:49 pm
Forum: General
Topic: DHCPv6 Lease-Scripts
Replies: 2
Views: 919

Re: DHCPv6 Lease-Scripts

Is it possible that "binding script" is only available in CLI but not in GUI?

In GUI i can not find where to put my scripts into.
by RcRaCk2k
Tue Nov 07, 2023 11:55 am
Forum: RouterBOARD hardware
Topic: RJ45 Connector Failure
Replies: 0
Views: 2678

RJ45 Connector Failure

Hi Guys, i have a very strange issue. I am using shilded RJ45 CAT5e Plugs that i crimp with a KNIPPEX Tool. If i insert the plug into the WAP60G it shows 1 GBit/s, but when i touch the cable (press it deeper into the WAP60G Unit), it goes down to 100 MBit/s. If i pull on the cable, and restart the P...
by RcRaCk2k
Fri Sep 29, 2023 1:42 am
Forum: RouterOS beta
Topic: BGP Filter bgp-as-path reject
Replies: 7
Views: 4668

Re: BGP Filter bgp-as-path reject

Okay, i have found the solution.... When exporting the routes, and you are filtering as-path for "beginns with", you have to add your own ASN in first position. So you do not check against the received protocol, it will check against what will sent out to the bgp-peer. That is strange to h...
by RcRaCk2k
Fri Sep 29, 2023 1:36 am
Forum: RouterOS beta
Topic: BGP Filter bgp-as-path reject
Replies: 7
Views: 4668

Re: BGP Filter bgp-as-path reject

This does not work for me - but why? if ( bgp-as-path "^65022" ) { accept; } This results, that the BGP-Announcements from AS65022 are not forwarded. If i specifiy the IP-Network from that ASN, it will work. So the RegEX is not working for me. Screenshot 2023-09-29 003549.jpg These Routes ...
by RcRaCk2k
Mon Sep 18, 2023 1:46 am
Forum: Forwarding Protocols
Topic: BGP Templates copies instead of references
Replies: 1
Views: 1228

Re: BGP Templates copies instead of references

After reboot all template-values were applied to my connection-entity.
That is not okay!
Screenshot 2023-09-18 004612.jpg
by RcRaCk2k
Sun Sep 17, 2023 11:14 pm
Forum: Forwarding Protocols
Topic: BGP Templates copies instead of references
Replies: 1
Views: 1228

BGP Templates copies instead of references

Hi Guys, is it me or is it ROSv7 that drives me crazy? I add a BGP Template. I use that created template in new BGP-Connection. I click OK and all the parameters from Template will be copied into the new BGP-Connection, instead of being referenced to the template (at view only). When i change the Ro...
by RcRaCk2k
Sat Sep 02, 2023 10:57 pm
Forum: General
Topic: hEX S - Queue performance on bridge
Replies: 7
Views: 1580

Re: hEX S - Queue performance on bridge

Thank you for your hints on that. If i use the bridge to bridge all ports and go to Switch > Ports and do some testings on INGRESS / EGRESS settings. If i set EGRESS to 270M, Download is about 256M, so this is perfect. But on the INGRESS when i set 270M i only get 12M on the client on Upload. Is the...
by RcRaCk2k
Fri Sep 01, 2023 4:57 pm
Forum: General
Topic: hEX S - Queue performance on bridge
Replies: 7
Views: 1580

hEX S - Queue performance on bridge

Hi guys, i am not sure, but i think i have seen this working - but for now it is not: Add a queue with 570M for Up- and Downstream on a simple bridge setup: # 2023-09-01 15:55:06 by RouterOS 7.11.1 # software id = **ELIDED** # # model = RB760iGS # serial number = **ELIDED** /interface bridge add add...
by RcRaCk2k
Sat Jul 29, 2023 3:11 pm
Forum: General
Topic: DHCPv6 Lease-Scripts
Replies: 2
Views: 919

DHCPv6 Lease-Scripts

Hi Guys,

i need to log the IPv6-DHCP events in my database, so i could see what IPv6 Prefix was delegated to wich user.

Currently it is not possible to do that.

By the way, for IPv4 DHCP it is.

So when will the option to be available to script things for lease-start and lease-end?
by RcRaCk2k
Fri Jul 28, 2023 11:13 am
Forum: General
Topic: CRS326 - Dual-PSU no Log-Entity when Power-Source fails / restores
Replies: 0
Views: 605

CRS326 - Dual-PSU no Log-Entity when Power-Source fails / restores

Hi Guys, for CRS326 as a dual psu powered device, there is no log message in the history that the power-supply PSU1 or PSU2 has failed. This is one oft the important information in it security. How should we deal with a failing PSU when we will not being alerted? Model: CRS326-24S+2Q+ Firmware: v7.1...
by RcRaCk2k
Tue Jul 25, 2023 9:02 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

Okay, i will try 7.11 beta, every day the router stops bgp-routing because of lacking BFD. I have to CTRL-C to abort the /routing/bfd/session/print command. [rack@router.de.seeon.landertsham.cgn] > routing/bfd/session/print Flags: U - up, I - inactive [rack@router.de.seeon.landertsham.cgn] > [rack@r...
by RcRaCk2k
Sat Jul 22, 2023 10:21 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

Just to drop this hint here: I had a issue with BFD. BGP-Session went down at 03 am and was not coming back. I was able to ssh into the device from a direct neighbor. As i issued /routing/bfd/session print the CLI hangs. Then i did a Port-Forwarding via PUTTY to the malfunction device and run a Winb...
by RcRaCk2k
Tue Jul 18, 2023 11:09 pm
Forum: General
Topic: Discovery not working correctly
Replies: 2
Views: 719

Re: Discovery not working correctly

So from that point of view, i should: Add a vlan-interface to bridge Set type of bridge-vlan to TAGGED ONLY Set PVID of bridge1 to 1 Add bridge1 to vlan as tagged port Assign IP-Address to new added vlan-interface replace interface-list for discovery with new added vlan-interface hmmm.... thats loony.
by RcRaCk2k
Tue Jul 18, 2023 5:30 pm
Forum: RouterOS beta
Topic: vxlan performance?
Replies: 29
Views: 17961

Re: vxlan performance?

Seeing the new CRS504-4XQ-IN that will be really cool. Swtich-Chip: MARVELL® Prestera® 98DX4310 Multi-Layer Ethernet Switch Also this switch supports Layer-2 Wire-Speed Switching engine with large MAC table Layer-3 Wire-Speed Routing engine with large LPM table CAPWAP overlay support Virtualization ...
by RcRaCk2k
Mon Jul 17, 2023 10:09 pm
Forum: General
Topic: Discovery not working correctly
Replies: 2
Views: 719

Discovery not working correctly

Hi Guys, i was testing 6.49.x and 7.10.x on an CRS317 and CRS326 both firmwares were not able to correctly display there neighbours. Configuration: Interface west and east transports vlans 2220-2229 and 2250 ... VLAN 2250 is my Management-VLAN Interface bridge1 vlan-filtering is turned on and the in...
by RcRaCk2k
Sun Jul 16, 2023 4:29 pm
Forum: RouterOS beta
Topic: vxlan performance?
Replies: 29
Views: 17961

Re: vxlan performance?

CRS317 do. Is there any prove that CRS317 do VxLAN in Hardware on the SwitchChips ASIC? Because the documentation of ROS 6 and 7 do not tell anything about that. There is VxLAN flagged to be done on CPU only. https://help.mikrotik.com/docs/display/ROS/L3+Hardware+Offloading#L3HardwareOffloading-Mon...
by RcRaCk2k
Sun Jul 16, 2023 4:22 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM MPLS Support
Replies: 56
Views: 25869

Re: CRS317-1G-16S+RM MPLS Support

... deleted.
by RcRaCk2k
Sat Jul 15, 2023 2:38 pm
Forum: Wireless Networking
Topic: W60G Interface SSID cutoff
Replies: 0
Views: 1379

W60G Interface SSID cutoff

Hi Guys, i have two SSIDs they share the same identical first part of characters. The W60G-Client jumps between both Devices with unique SSIDs. SSID on AP #1: rsm-connect.net-de-frei-feuerweh SSID on AP #2: rsm-connect.net-de-frei-feuerwehr-lokwelt SSID on STA: rsm-connect.net-de-frei-feuerwehr-lokw...
by RcRaCk2k
Thu Jul 06, 2023 11:22 pm
Forum: General
Topic: CRS-3xx Learn Limit/Lock on first
Replies: 9
Views: 4014

Re: CRS-3xx Learn Limit/Lock on first

+1 on that.

Max Mac-Addresses per Interface.

Such a simple feature. CISCO also supports that, but i dont want to buy a cisco switch for that type of feature.
by RcRaCk2k
Fri May 19, 2023 4:54 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

by RcRaCk2k
Fri May 19, 2023 4:35 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

v7.10 have / will have initial BFD support.
Lets test.

-EDIT- By the way, there is nothing about BFD in the change logs for v7.10-beta5. Very funny.
by RcRaCk2k
Sat Mar 11, 2023 8:18 pm
Forum: General
Topic: SSH key import on V7.3.1
Replies: 9
Views: 2682

Re: SSH key import on V7.3.1

Also discovering the same issue. This is unbelievable. Running v7.8 Now i have changed to RSA, the import will work, but the login fails: root@trafficgrapher:~/bin/auth# ssh -v -i /root/bin/auth/remote-access_new.rsa remote-user@172.16.15.240 OpenSSH_8.4p1 Debian-5+deb11u1, OpenSSL 1.1.1n 15 Mar 202...
by RcRaCk2k
Sun Mar 05, 2023 11:00 am
Forum: General
Topic: WinBox disalbe AutoSave-Session on Close forever
Replies: 0
Views: 387

WinBox disalbe AutoSave-Session on Close forever

Hi Guys,

having 200+ Managed addresses in WinBox and on every entity there is "Autosave Session" activated. How can i change that for all 200+ sessions in once?

My adresses-file is password saved, so it is encrypted and i can not modify the file by a file-editor.
by RcRaCk2k
Sun Mar 05, 2023 10:26 am
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

As Wireless is a core business of MikroTik, I would have expected something like this to be added years ago. But it never happened. This is what OLSR is for. Mikrotik can make a fork of it and implement some sensors. We had this routing-protocol running on Ubiquiti Hardware with sensors for AirMax-...
by RcRaCk2k
Tue Feb 28, 2023 5:39 pm
Forum: General
Topic: Routing metrics (distance) not working correctly
Replies: 2
Views: 447

Re: Routing metrics (distance) not working correctly

Ah okay that seems legit. So i am not able to insert multiple bgp routes to the FIB, because BGP will do a preselection wich routes will be inserted in FIB. And this selection is prior then the metrics. So i need to change the MED / LOCAL-PREF values, to get the personally preferred route installed.
by RcRaCk2k
Tue Feb 28, 2023 3:17 pm
Forum: General
Topic: Routing metrics (distance) not working correctly
Replies: 2
Views: 447

Routing metrics (distance) not working correctly

Hi Guys,

what is going on with mikrotik routing and distances?
wrong-route-selected.jpg
preferred route was installed with 0.0.0.0/0 via 172.16.8.193 metric 10 but is not active.
route with metric 200 via 172.17.0.178 is active instead.

What i am doing wrong here?
by RcRaCk2k
Sun Feb 12, 2023 9:14 pm
Forum: General
Topic: VXLAN and dont-fragment
Replies: 0
Views: 350

VXLAN and dont-fragment

Hey Guys, mikrotik drives me crazy these days... From one pitfall to another. ROS Documentation about VxLAN says: dont-fragment (disabled | enabled | inherit; Default: disabled) But in CLI and in WinBox there is no such option? What is the MTU of a VxLAN Interface? 1464 i guess? So Inner-MSS is 1420...
by RcRaCk2k
Sat Feb 04, 2023 3:26 pm
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

is this the Mellanox extension (MAGP) or a completely separate linux implementation with similar functionality? Conntrackd is only a daemon that inter-exchange flow-based connection tracking to one or more routers via multicast protocol. With that technique you are able to setup a active/active/act...
by RcRaCk2k
Fri Feb 03, 2023 12:14 pm
Forum: General
Topic: CRS326-24S+2Q+ IPv6 forwarding Stopps working
Replies: 4
Views: 519

Re: CRS326-24S+2Q+ IPv6 forwarding Stopps working

IGMP Snooping is not enabled. Used the switch configuration as is from default. Only did IP and VLAN Settings. # jan/02/1970 16:04:52 by RouterOS 7.7 # software id = U627-VMD4 # # model = CRS326-24S+2Q+ # serial number = AEF60B43726E /interface bridge add admin-mac=C4:AD:34:CF:F2:60 auto-mac=no comm...
by RcRaCk2k
Fri Feb 03, 2023 10:16 am
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

Yeah i will send you the support-ticket as far as i can. But i have a related question: Is it possible that the Slave dont have the synced connections in his own conntrack-table? Our setup looks like this: Download.png Green = Upstrem to the Internet - works Blue = Downstream from the Internet - wor...
by RcRaCk2k
Fri Feb 03, 2023 9:54 am
Forum: General
Topic: CRS326-24S+2Q+ IPv6 forwarding Stopps working
Replies: 4
Views: 519

CRS326-24S+2Q+ IPv6 forwarding Stopps working

Hi Guys, running v.6.49.7 on top of CRS326-24S+2Q+ sometimes i have to restart the switch because it is not forwarding IPv6 multicast traffic anymore. In this case, no neighbor discovery is possible, also IPv6-RA is not possible anymore. With tcpdump -eni eth0 ip6 on the servers they connected to th...
by RcRaCk2k
Sun Jan 29, 2023 9:38 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

There should be a repository where we can get all the drivers needed to bake a own linux kernel. I can dispense the WinBox when i have plain access to the linux console. But i need a reliable hardware at a good pricepoint where mikrotik comes into the game. But there are no alternative firmwares ava...
by RcRaCk2k
Sun Jan 29, 2023 10:59 am
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

Can we spent money, for getting prioritized?

My CCR2004 is keeping rebooting every 30-50 Minutes. I am stuck on v6 because of missing BFD. I am not able to upgrade to v7 as long as BFD is not working.
by RcRaCk2k
Sun Jan 01, 2023 8:02 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

@Mikrotik... release your software on github and let the community work on it as -community-edition... And for Features that will be cool, you can port the changes to your main codebase. This is so annoying. CCR2004 is not stable with v6 (packet-loss) only in v7 the device acts like a router. But la...
by RcRaCk2k
Sun Jan 01, 2023 7:58 pm
Forum: Forwarding Protocols
Topic: BGP with BFD
Replies: 27
Views: 7561

Re: BGP with BFD

On 7.7 either... What is going on behind mikrotiks development team?

Is it so complicated to give some hint about when BFD will be implemented?

Sorry, but is BFD so rarely used, that mikrotik can give a sh*t about it?
by RcRaCk2k
Fri Nov 18, 2022 5:57 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 148
Views: 26878

Re: v7 and BFD, any ETA?

Having some v7 only hardware in the network, i am very pissed of, that BFD is not working.
Can you please speed up your BFD implementation?
by RcRaCk2k
Mon Sep 12, 2022 9:27 pm
Forum: General
Topic: Is Mikrotik calling home?
Replies: 16
Views: 1556

Is Mikrotik calling home?

Hi!

Today i had 4-8 MBit/s Traffic between my CPE (Mikrotik) and 18.66.18.89 (Amazon Cloud).

Is Mikrotik calling home?
by RcRaCk2k
Mon Aug 29, 2022 10:08 pm
Forum: RouterOS beta
Topic: rOS 7.5rc1 - VRRP Connection Tracking Syncing issue
Replies: 1
Views: 2194

rOS 7.5rc1 - VRRP Connection Tracking Syncing issue

Hi Guys, i am using VRRP with Connection-Tracking and have discovered an issue with the NAT-Table. I have two routers (Router A - VRRP Master) and (Router B - VRRP Slave). Both routers are configured identical - running rsc-script on both routers, only changing fixed Interface-IP-Addresses. There is...
by RcRaCk2k
Sat Jul 23, 2022 3:06 pm
Forum: General
Topic: ROS 6.49 - Device Discovery issue when VLAN is used
Replies: 2
Views: 749

Re: ROS 6.49 - Device Discovery issue when VLAN is used

Yeah, i had also thoughts this way, that i have to define an interface-list, but when i am doing this, then i can not see one single device in discovery. You are right, when not using PVID on bridge1, but using VLAN-Tagged on Bridge-Interface and adding a VLAN-Interface to bridge1 that will solve th...
by RcRaCk2k
Wed Jul 20, 2022 9:56 am
Forum: General
Topic: ROS 6.49 - Device Discovery issue when VLAN is used
Replies: 2
Views: 749

ROS 6.49 - Device Discovery issue when VLAN is used

Hi Guys, the Mikrotik device discovery tool on CRS326-24S+2Q+ and the broadcast daemon on hEX S have some issues when using VLAN with VLAN-Aware-Hardware. Both devices uses VLANs with the new configuration-style via BRIDGE-VLAN. So lets start with an example configuration on hEX S: bridge is native ...
by RcRaCk2k
Sun Jun 05, 2022 1:30 pm
Forum: General
Topic: SSTP & IPv6
Replies: 26
Views: 9789

Re: SSTP & IPv6

we tried version 7.2.3 on our seminar now, without success Oh my gosh. That can not be serious. This implementation and bug-fixing policy by Mikrotik is that what i hate the most. There is no possibility to use that devices for professional purposes. But the hardware is able to. Only the software i...
by RcRaCk2k
Thu Feb 10, 2022 7:38 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 58
Views: 40138

Re: BGP ECMP (multipathing)

7.2rc3 is out now - and no ECMP implementation so far.
by RcRaCk2k
Thu Feb 10, 2022 7:02 pm
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

(change from the default "auto" to "yes")? After changing both to routers to yes, the message is gone, but there is no initial sync after booting R2 (Backup). 16:58:00 system,info router rebooted 16:58:10 vrrp,info vrrp.voip-router now BACKUP 16:58:10 vrrp,info vrrp.voip-router ...
by RcRaCk2k
Thu Feb 10, 2022 6:53 pm
Forum: RouterOS beta
Topic: DHCP Option 82 circuit/remote ID for server leases in v7?
Replies: 3
Views: 3833

Re: DHCP Option 82 circuit/remote ID for server leases in v7?

Perhaps you can use Docker on your Mikrotik model to run exactly a instance of a DHCP Server that supports your needs.

So you do not need an extra device for this job.
by RcRaCk2k
Thu Feb 10, 2022 11:23 am
Forum: RouterOS beta
Topic: BGP + ECMP
Replies: 16
Views: 9217

Re: BGP + ECMP

To the Mikrotik Engineers:

Please add BGP ECMP to the List of https://help.mikrotik.com/docs/display/ ... col+Status so we can track the availability of that feature in ROS v7.x

Thank you.
by RcRaCk2k
Wed Feb 02, 2022 4:49 pm
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

Also i see the following information in log after Reboot (marked interesting log entity with >>>>): currently running 7.2rc3 on both routers. 14:46:15 system,info router rebooted 14:46:15 vrrp,info vrrp.voip-router now BACKUP 14:46:15 vrrp,info vrrp.voip-router starting CONNTRACK SLAVE >>>> 14:46:15...
by RcRaCk2k
Fri Jan 28, 2022 11:53 am
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

Okay, i beleave that there is no initial sync? I am right? For my point of view only new connections will be synchronized to the Backup-Router? EDIT: And if there was a SIP-Connection this information is not synchronized between Master <> Backup Router. When a new session will be established at port...
by RcRaCk2k
Thu Jan 27, 2022 10:45 pm
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

We are considering decoupling sync connection tracking from VRRP, and make connection syncing a standalone feature that users may set up in any way they want. This sounds greate. But i have an another question: While R1 is VRRP Master and CONNTRACK Master, should i see the connections on the BACKUP...
by RcRaCk2k
Wed Jan 19, 2022 6:58 pm
Forum: Announcements
Topic: v7.2rc1 is released!
Replies: 240
Views: 159973

Re: v7.2rc1 is released!

Voting for BGP Multipath (ECMP).

Does anyone know what BGP-Daemon is under the hood?

OSPF and MPLS have ECMP capabilities, why BGP have not?
by RcRaCk2k
Sat Dec 25, 2021 10:04 am
Forum: General
Topic: ROS 6.49 // Bridge Port no MAC-Addresses
Replies: 0
Views: 2833

ROS 6.49 // Bridge Port no MAC-Addresses

Hi Guys, we have a bridge and assigned 3 ports to them (ether1, ether2, sfp). Sometimes the device looses connection to devices on ether1 and ether2. If you disable and enable ether1 / ether2 it will not solve the issue. You have to completely reboot the whole hEX-S Board. Now i have found " le...
by RcRaCk2k
Tue Dec 07, 2021 11:17 pm
Forum: RouterOS beta
Topic: BGP + ECMP
Replies: 16
Views: 9217

Re: BGP + ECMP

I thought that v7 is the first ROS that support BGP with multipath (ECMP). This makes me a little bit angry. Currently i use Ubiquiti Routers to achive ECMP with BGP. I moved many routers to Mikrotik because in some topics ECMP for BGP on Mikrotik was planed for v7.x - and now, this feature is not r...
by RcRaCk2k
Tue Dec 07, 2021 6:20 pm
Forum: RouterOS beta
Topic: BGP + ECMP
Replies: 16
Views: 9217

BGP + ECMP

Hi Guys, how to enable ECMP for BGP routes? > /ip/route/print detail where !inactive Flags: D - dynamic; X - disabled, I - inactive, A - active; c - connect, s - static, r - rip, b - bgp, o - ospf, d - dhcp, v - vpn, m - modem, y - copy; H - hw-offloaded; + - ecmp D b dst-address=0.0.0.0/0 routing-t...
by RcRaCk2k
Mon Dec 06, 2021 3:41 pm
Forum: General
Topic: Neighbor Discovery Issue | v6.49.2
Replies: 0
Views: 1008

Neighbor Discovery Issue | v6.49.2

Hi Guys, having an issue with "Neighbor Discovery" when doing VLAN with ROS as it should be. I can not see the CDPs from the Mikrotik-CPE when doing VLAN-Filtering (Bridge VLAN configuration - the NEW way to do this) instead of adding VLAN-Interface to SFP-Interface and bridge it together ...
by RcRaCk2k
Mon Dec 06, 2021 3:12 pm
Forum: RouterOS beta
Topic: rOS v7.1 - IPv6 LL okay but not static public address [SOLVED]
Replies: 3
Views: 2013

Re: rOS v7.1 - IPv6 LL okay but not static public address [SOLVED]

Okay, there was a switch between (PLANET Fiber Switch) that was blocking Neigh-Discovery-Packets. This was not visible on the first look, because IPv6 was functional for known hosts, but not for new hosts. There were no machanismen installed, so the switch was not acting as it should. After a reboot...
by RcRaCk2k
Sat Dec 04, 2021 1:07 pm
Forum: RouterOS beta
Topic: rOS v7.1 - IPv6 LL okay but not static public address [SOLVED]
Replies: 3
Views: 2013

Re: rOS v7.1 - IPv6 LL okay but not static public address [SOLVED]

Okay, i am testing from switch to switch (there are many CRS326-24S+2Q+RM switches in line) and on one switch there is multicast not working.

Will do some tests and when i have found a solution i will report it here.
by RcRaCk2k
Sat Dec 04, 2021 12:44 pm
Forum: RouterOS beta
Topic: rOS v7.1 - IPv6 LL okay but not static public address [SOLVED]
Replies: 3
Views: 2013

rOS v7.1 - IPv6 LL okay but not static public address [SOLVED]

Hey Guys, sorry to hesitate you, but IPv6 on my RB5009UG is driving me crazy. I have a subnet 2a04:df80:0:1580::/64 and this is working - there are many clients connected to that network and are fully functional. Today i have installed a brand new RB5009UG, i can ping it on the LL-Interface-Address ...
by RcRaCk2k
Fri Dec 03, 2021 12:08 pm
Forum: RouterOS beta
Topic: Routing-Filter v7.1 common tasks (templates) [SOLVED]
Replies: 1
Views: 1491

Re: Routing-Filter v7.1 common tasks (templates) [SOLVED]

Found the solution...
if( dst==0.0.0.0/0 ) {
  set  pref-src 45.xxx.xx.185;
  accept;
}
Source: https://help.mikrotik.com/docs/pages/vi ... d=74678285

Was a little bit confusing.
Thank you.
by RcRaCk2k
Fri Dec 03, 2021 11:57 am
Forum: RouterOS beta
Topic: Routing-Filter v7.1 common tasks (templates) [SOLVED]
Replies: 1
Views: 1491

Routing-Filter v7.1 common tasks (templates) [SOLVED]

Hi Guys, i like to configure some common tasks as interpreting BGP-Communitys for LOCAL-PREF modification. How can i jump from one CHAIN to another and RETURN to the LAST? Or how about running common functions() with arguments? Like BIRD Routing Daemon is doing? Also, where can i find a complete ref...
by RcRaCk2k
Tue Oct 05, 2021 5:41 pm
Forum: RouterOS beta
Topic: VRRP sync-connection-tracking setup
Replies: 32
Views: 15489

Re: VRRP sync-connection-tracking setup

Is it possible to sync connection tracking state in an active/active setup? I like to peer via BGP with my upstream provider, so i like to have two active bgp sessions and so on to route the traffic from WAN to LAN where the traffic arrives. So there is a possibility of asymmetric routing. Because o...
by RcRaCk2k
Thu Sep 02, 2021 9:55 am
Forum: General
Topic: Some kind of ARP Spoofing? // CRS354-48G-4S+2Q+RM
Replies: 0
Views: 694

Some kind of ARP Spoofing? // CRS354-48G-4S+2Q+RM

Hi Guys, i had a fresh install of two CRS354-48G-4S+2Q+RM cross connected via 2x 10G LACP LAG. I did 4 vlan port-groups: 1-12 VLAN 10, 13-24 VLAN 20, 25-36 VLAN 30, 37-48 VLAN40 One switch stopped working on VLAN20, all ports on VLAN20 (13-24) were "deactivated". It was not possible to fin...
by RcRaCk2k
Fri Aug 27, 2021 7:54 pm
Forum: Virtualization
Topic: Install Linux on CCR
Replies: 10
Views: 19971

Re: Install Linux on CCR

Did you succeed with installation of Unix on Mikrotik CCRs?
by RcRaCk2k
Fri Jan 08, 2021 8:27 pm
Forum: General
Topic: IPIP Tunnel and inner IPv6 not working
Replies: 3
Views: 1077

Re: IPIP Tunnel and inner IPv6 not working

Thats very bad, because there is no PBR support for IPv6 in ROSv6.xx.

I will try to get my hands on the v7 BETA... Hope that my current setup will work in v7 current development state ;-)
by RcRaCk2k
Fri Jan 08, 2021 8:05 pm
Forum: General
Topic: IPv6 Routing Mark in Firewall > Mangle Rules
Replies: 60
Views: 21820

Re: IPv6 Routing Mark in Firewall > Mangle Rules

So we have to upgrade to v7 BETA to get PBR working on IPv6?

Is it save to run v7 BETA on a provider network yet?
by RcRaCk2k
Thu Jan 07, 2021 9:19 pm
Forum: General
Topic: IPIP Tunnel and inner IPv6 not working
Replies: 3
Views: 1077

IPIP Tunnel and inner IPv6 not working

Hi Guys,

why is IPv6 in an IPIP tunnel not working?

I have a IPIP Tunnel Interface and have added an IPv6-Address to that interface.
But both ends can not see each other?!?

IPv4 works.

Is there some missconfiguration or is mikrotik not capable in encapsulate IPv6 in IPIP-Tunnels?
by RcRaCk2k
Sun Sep 20, 2020 10:59 pm
Forum: RouterBOARD hardware
Topic: CRS326-24S+2Q+ // MTU 9000 // Bonding // Balance-RR // Hardware-Offloading
Replies: 3
Views: 1486

Re: CRS326-24S+2Q+ // MTU 9000 // Bonding // Balance-RR // Hardware-Offloading

Bonding Since RouterOS v6.42 all CRS3xx series switches support hardware offloading with bonding interfaces. Only 802.3ad and balance-xor bonding modes are hardware offloaded, other bonding modes will use the CPU's resources. You can find more information about the bonding interfaces in the Bonding...
by RcRaCk2k
Sat Sep 19, 2020 9:37 pm
Forum: RouterBOARD hardware
Topic: CRS326-24S+2Q+ // MTU 9000 // Bonding // Balance-RR // Hardware-Offloading
Replies: 3
Views: 1486

CRS326-24S+2Q+ // MTU 9000 // Bonding // Balance-RR // Hardware-Offloading

Hi Guys, how can i get the switch to do hardware-offloading with "balance-rr" ? What i am doing wrong? Firmware: v6.47.3 Device: CRS326-24S+2Q+ MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO ...
by RcRaCk2k
Sat Sep 05, 2020 8:34 pm
Forum: General
Topic: CRS LED Settings failure // CRS326-24S+2Q+
Replies: 2
Views: 1108

Re: CRS LED Settings failure // CRS326-24S+2Q+

Is there nobody out there discovering the same issue?
All my CRS326-24S+2Q+ devices with current firmware is showing that issue.
by RcRaCk2k
Sat Aug 29, 2020 6:40 pm
Forum: General
Topic: CRS326-24S+2Q 200 MBit/s Maxout
Replies: 6
Views: 1480

Re: CRS326-24S+2Q 200 MBit/s Maxout

Oh yeha, now i see, the config-export was cut in half. Dont know why. I have updated the initial post with the correct config-export. For instance VLAN in this case is not correct and I think this may break the offloading. You need to implement VLAN filtering on the Bridge and add the add the manage...
by RcRaCk2k
Wed Aug 26, 2020 8:46 am
Forum: General
Topic: CRS326-24S+2Q 200 MBit/s Maxout
Replies: 6
Views: 1480

Re: CRS326-24S+2Q 200 MBit/s Maxout

Your config is way off. The config really needs to be mainly done via the bridge. Here is the link for vlans with bonds on the crs3xx series. https://wiki.mikrotik.com/wiki/Manual:CRS3xx_VLANs_with_Bonds This is exactly how i did the configuration. In most cases, i unpack the switch, and only chang...
by RcRaCk2k
Mon Aug 24, 2020 8:59 pm
Forum: General
Topic: CRS326-24S+2Q 200 MBit/s Maxout
Replies: 6
Views: 1480

CRS326-24S+2Q 200 MBit/s Maxout

Sorry Guys, but is Mikrotik kidding me? I have a CRS326-24S+2Q and i having trouble to get 250 MBit/s out of that switch. All ports are HARDWARE-OFFLOADED, but the CPU goes that high, that the traffic caps at 250 MBit/s. Core fucked up.JPG Why is this happening? Yeah i know i should update firmware ...
by RcRaCk2k
Sun Aug 23, 2020 10:11 pm
Forum: SwOS
Topic: CSS326-24G-2S+RM hangs until power cycle
Replies: 124
Views: 69453

Re: CSS326-24G-2S+RM hangs until power cycle

I ran into that issue twice. CRS326-24G-2S+ Current Firmware: ROS v6.44.5 The switch locks up and is not able to communicate via IP (SSH, Telnet, MAC-Telnet, WinBox, arping). Only powercycle will bring the switch back into life. We use the SFP1-Port for Upstream with an Fiber-Switch. On the fiber-sw...
by RcRaCk2k
Wed Jul 22, 2020 8:47 am
Forum: Wireless Networking
Topic: W60G tx-power setting gone in latest firmware
Replies: 8
Views: 4482

Re: W60G tx-power setting gone in latest firmware

I miss that option too. I have a link that is 900m long and the RSSI is fluctuating. Even the link goes down. That there is an A-TPC active is clearly visible. But the programming of that A-TPC mechanismen is not good at all. Every 30 Minutes the link goes down. But is not exactly 30 Minutes. Someti...
by RcRaCk2k
Tue Jul 07, 2020 11:04 am
Forum: Forwarding Protocols
Topic: Mikrotik L2TPV3
Replies: 15
Views: 17103

Re: Mikrotik L2TPV3

I think that Mikrotik have to work on many things to get a real game changer.
Missing L2TPv3 is a nogo. Linux-Kernel supports L2TPv3 so there is only some work in programming wrappers from ROS-Configuration to Unix-Commands.
by RcRaCk2k
Thu Jul 02, 2020 9:50 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 58
Views: 40138

Re: BGP ECMP (multipathing)

How have i to setup "Set In Nexthop" on Actions-Tab as @heribertos suggested?
What value have to be in there?
by RcRaCk2k
Thu Jul 02, 2020 9:46 pm
Forum: General
Topic: CRS LED Settings failure // CRS326-24S+2Q+
Replies: 2
Views: 1108

CRS LED Settings failure // CRS326-24S+2Q+

Hi guys,

my Interface Activity is not shown on the LEDs because i can not see *-led2 in my settings, there is only *-led1 (Speed-LED).

What can i do to make the LEDs working again?

Firmware: 6.47
Mikrotik Failed.JPG
by RcRaCk2k
Fri Dec 13, 2019 8:46 am
Forum: RouterBOARD hardware
Topic: CRS326-24S+2Q+ // DC-IN Option
Replies: 0
Views: 2699

CRS326-24S+2Q+ // DC-IN Option

Hi Guys, i have a 57V powered site. I like to use CRS326-24S+2Q+ in there. As there is no DC-IN currently, what will be the best option to get the switch running with the provided power of 57V? It is bad, that there is no Power-Bay, so you can Switch the AC-Blades to DC-Blades. Is the only way, to o...
by RcRaCk2k
Tue Jul 02, 2019 11:18 pm
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 58
Views: 40138

Re: BGP ECMP (multipathing)

Came to that point today and i am disappointed that mikrotik developers are not able to give us some information if that feature is on a todo list or not.
by RcRaCk2k
Sun Jun 16, 2019 2:26 pm
Forum: General
Topic: PoE-Cut-Off randomly
Replies: 2
Views: 1476

PoE-Cut-Off randomly

Hi guys, i have a PowerBox Pro mounted outside on the tower. The PowerBox Pro is powered via ETHER-1 POE-IN. There is a Rocket-M5 connected on ether-4 and a PowerBeam M5 connected on ether-5. Both devices will be powered via the PowerBox Pro. The both APs are rebooting randomly at the same time. PoE...
by RcRaCk2k
Mon Mar 04, 2019 12:17 pm
Forum: General
Topic: Recursive Routes - Need Help
Replies: 7
Views: 3517

Re: Recursive Routes - Need Help

But there is no gateway on the 93.240.147.64/29 subnet.
That is why i need an interface-route.
by RcRaCk2k
Mon Mar 04, 2019 11:51 am
Forum: General
Topic: Recursive Routes - Need Help
Replies: 7
Views: 3517

Re: Recursive Routes - Need Help

That means, that Mikrotik is not the correct router for this situation?
So i have to switch to a other vendor like ubiquiti?

But why is my first route not working?
dst-address=0.0.0.0/0 gateway=IP-ADDRESS%INTERFACE

That should do the trick, but why it wont work?
I am a little bit confused.
by RcRaCk2k
Mon Mar 04, 2019 9:43 am
Forum: General
Topic: Recursive Routes - Need Help
Replies: 7
Views: 3517

Re: Recursive Routes - Need Help

Hi, i have done the scope-settings, but it will not work as expected. Can you please have a look on that? [admin@MikroTik] > ip route print detail Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit ...
by RcRaCk2k
Fri Mar 01, 2019 11:47 am
Forum: General
Topic: Recursive Routes - Need Help
Replies: 7
Views: 3517

Recursive Routes - Need Help

Hi Guys, i have two networks on the same LAN: #1 192.168.0.0/29 (The Router is .1) #2 192.168.1.5/29 (All IPs are useable 1-7) There is only one default-gateway on LAN#1 but both networks are on the same LAN (so no VLAN is configured). My Router is 192.168.1.5 and i can do an arp-ping to 192.168.0.1...
by RcRaCk2k
Fri Feb 22, 2019 10:33 pm
Forum: General
Topic: RB4011 - SFP Link Flapping once per second
Replies: 3
Views: 1987

Re: RB4011 - SFP Link Flapping once per second

I will give it a try.

A user already confirms that the SFP i currently use is now supported.
viewtopic.php?f=21&t=139057&p=709663#p709975
by RcRaCk2k
Sat Feb 16, 2019 5:20 pm
Forum: General
Topic: RB4011 - SFP Link Flapping once per second
Replies: 3
Views: 1987

RB4011 - SFP Link Flapping once per second

Hey Guys, i have a RB4011 with current stable firmware. My SFP is a 1 GbE SFP from FiberStore, branded as JUNIPER. It is a BiDi 1550/1310nm (yellow marked). Per second the link flaps. Also the UI shows (Running, Standby, Running, Standby....) https://youtu.be/-xBT-wZGTe0 The same SFP is funktional i...
by RcRaCk2k
Thu May 17, 2018 8:32 am
Forum: General
Topic: DHCP Option 82 / DHCP-Snooping
Replies: 11
Views: 23674

Re: DHCP Option 82 / DHCP-Snooping

@alexcherry what is your configuration looking like? Please send me your configuration i will give a try on that. Agent-Circuit-Id should be configurable with placeholders like %m = MAC-Address of Interface %n = Name of Interface (custom name) %i = ID of Interface XX (eg 01, 02, 03....) The informat...
by RcRaCk2k
Fri Sep 15, 2017 8:19 am
Forum: SwOS
Topic: Hosts-Tab infinite loop on JSON-Result
Replies: 0
Views: 2228

Hosts-Tab infinite loop on JSON-Result

Hey Gusy, there is issue in your code. When i request the "Hosts"-Tab, the json-output looks like that: [{adr:'fa94f6af57ad',prt:0x01,drp:0x00,mir:0x00,sts:0x07,vid:0x0001}, {adr:'d4ca6d1bf485',prt:0x00,drp:0x00,mir:0x00,sts:0x07,vid:0x0001}, {adr:'dc9fdb28c387',prt:0x01,drp:0x00,mir:0x00,...
by RcRaCk2k
Fri Apr 21, 2017 1:51 pm
Forum: General
Topic: DHCP Option 82 / DHCP-Snooping
Replies: 11
Views: 23674

DHCP Option 82 / DHCP-Snooping

Hey Guys, is it possible to get DHCP-Snooping Option 82 running on ROS? We like to add interface-informations to a DHCP-Client-Request (DHCP Option 82). We install Mikrotik Router-Boards in buildings to get more than just one customer connected. To know, which customer have requested a DHCP-Lease we...
by RcRaCk2k
Mon Feb 13, 2017 7:49 pm
Forum: General
Topic: RB960PGS | PoE-IN with Gigabit
Replies: 1
Views: 1186

RB960PGS | PoE-IN with Gigabit

Hey Guys,

i use RB960PGS and power the device via PoE. I use a Ubiquiti PoE-Adapter wich was powering an 5AC Rocket before with Gigabit connection on LAN. After connecting the RB960PGS the interface came up with 100M only.

How can i use Gigabit-Speed with RB960PGS with PoE-IN used?
by RcRaCk2k
Tue Dec 01, 2015 4:50 pm
Forum: General
Topic: Problem with Speed-Limit on Bridged Port / RB3011UiAS
Replies: 0
Views: 830

Problem with Speed-Limit on Bridged Port / RB3011UiAS

Hi! I want to limit a customers Ethernet-Port to 200M/50M (down/up). The RouterBoard does strange things, when bridge will enable "Use IP firewalling". # dec/01/2015 15:44:05 by RouterOS 6.33.2 # software id = N68D-40SQ # /interface bridge add name=br1-internet protocol-mode=none /interfac...
by RcRaCk2k
Sun Apr 12, 2015 6:50 pm
Forum: SwOS
Topic: ACL does very strange things
Replies: 2
Views: 2485

Re: ACL does very strange things

Hey, is there a solution for this issue?
by RcRaCk2k
Sun Apr 12, 2015 12:24 pm
Forum: SwOS
Topic: Feature Request - DHCP
Replies: 7
Views: 4217

Re: Feature Request - DHCP

+1 for that feature.
by RcRaCk2k
Fri Jan 30, 2015 3:57 pm
Forum: SwOS
Topic: ACL does very strange things
Replies: 2
Views: 2485

ACL does very strange things

Hey Guys! We are using RB260GS and RB260GSP in our Fiber-Network to bring our customers online via Fiber. So our customers are connected to Port 1-5 and the Uplink is via Gigabit-SFP. To limit the bandwith we are using ACL, but we achieved very stupid things when using the FROM and TO Filter the sam...
by RcRaCk2k
Mon Sep 22, 2014 7:07 pm
Forum: SwOS
Topic: Accessing WebConfig but getting Octet Stream Download
Replies: 1
Views: 2674

Accessing WebConfig but getting Octet Stream Download

Hi!

My RB260GS will return a octet stream when i am accessing the WebInterface.

What is wrong with that device? I did not change anything. From one day to other it stops working.
by RcRaCk2k
Tue Aug 12, 2014 12:00 am
Forum: SwOS
Topic: SWoS issue - ACL, how to block all BUT specified destination
Replies: 3
Views: 5274

Re: SWoS issue - ACL, how to block all BUT specified destina

Hell yeah! What is this for a creepy issue? Why is there no ! / NOT implemented? I also need this Feature. Also there is no ability to select a Out-Interface. I like to limit the bandwith for some destinations. I sell 20/2 MBit to a customer which is connected to a 1 GbE via SFP. But within my Netwo...
by RcRaCk2k
Sat Jun 07, 2014 3:15 pm
Forum: SwOS
Topic: RB260GSP / Passive PoE / Ubiquiti / Error: Short Circuit
Replies: 5
Views: 9653

RB260GSP / Passive PoE / Ubiquiti / Error: Short Circuit

Hi all!

I've bought a RB260GSP to feed my Ubiquiti Hardware with passive PoE.

If i connect the Ubiquiti Hardware to the RB260GSP the Switch says "Short Circuit" and the red Led is blinking.

Is this Switch not able to PoE my Ubiquiti Device? The regular PoE-Adapter works fine.
by RcRaCk2k
Sat Jun 07, 2014 10:00 am
Forum: SwOS
Topic: RB260GS | Disable Reset-Button HW
Replies: 6
Views: 5878

Re: RB260GS | Disable Reset-Button HW

Charge the customer for that. Yeah, we do, but we always have a discussion with the customer about the fees. In our General Agreement Terms, there is a special article about manipulating devices owned by the ISP. There also specified the fees for repairing. But if our network goes down (for mainten...
by RcRaCk2k
Tue May 27, 2014 4:09 pm
Forum: SwOS
Topic: RB260GS | Disable Reset-Button HW
Replies: 6
Views: 5878

RB260GS | Disable Reset-Button HW

Hi! We use the RB260GS to bring our customers to our Fibre-Network. We use Ethernet-Connection and DHCP. The Bandwidth is limited by RB260GS via Egress rule and ACL-Rule. Some our customers are so cunning, that they use the Hardware Reset-Button to gain 1.000 MBit Connection. That is not what we wan...
by RcRaCk2k
Wed May 14, 2014 3:39 am
Forum: General
Topic: DHCP Relay Agent | Help needed
Replies: 3
Views: 1291

Re: DHCP Relay Agent | Help needed

Very terrible but useful :) Thank you.
by RcRaCk2k
Sun May 11, 2014 3:05 pm
Forum: General
Topic: DHCP Relay Agent | Help needed
Replies: 3
Views: 1291

DHCP Relay Agent | Help needed

Hi! I need to forward DHCP-Requests to a upstream DHCP-Server. I also need the following capabilities to do so: * Set DHCP-Sub-Option "Link Selection" - RFC3527 * Set DHCP-Sub-Option "DHCP Server Identifier Override" - RFC5107 Is Mikrotik capable of these DHCP-SubOptions? If not,...
by RcRaCk2k
Fri May 09, 2014 7:51 pm
Forum: SwOS
Topic: SFP Does Not Recover After Disconnect
Replies: 5
Views: 4672

Re: SFP Does Not Recover After Disconnect

I think they will have a general problem with SFP and RB260GS!!! RB260GS - SFP Module - Not working - no RX just TX http://forum.mikrotik.com/viewtopic.php?f=17&t=83873#p422216 That is so so annoying! Whe have currently 30 Switches in the field and have 80 pcs encamped. We will immediately stop ...
by RcRaCk2k
Mon Apr 21, 2014 8:49 pm
Forum: SwOS
Topic: RB260GS - SFP Module - Not working - no RX just TX
Replies: 6
Views: 8718

Re: RB260GS - SFP Module - Not working - no RX just TX

100m MM patch cord. Unbelievable !!!! After resetting both devices to "Factory defaults" the modules worked. I made 3 power cycles and the Fibre-Link was established and working fine without one interruption. I did not configure anything, after i picked the units from packaging. I have ins...
by RcRaCk2k
Sun Apr 20, 2014 9:05 pm
Forum: SwOS
Topic: RB260GS - SFP Module - Not working - no RX just TX
Replies: 6
Views: 8718

Re: RB260GS - SFP Module - Support for 40km and 80km Modules

Sorry, but anything is wrong with the RB260GS. Now i ordered new SFPs with Multimode to test both RB260GS units. Both SFP-LED are on, but there is no data communication between both devices. I tested both SPFs in two TP-LINK Switches and in DELL Switches. In both switches, the modules worked fine. S...
by RcRaCk2k
Fri Apr 11, 2014 9:45 am
Forum: SwOS
Topic: VLAN problem
Replies: 2
Views: 3241

Re: VLAN problem

Your config is wrong.

If Port 5 is your trunking port, it have to be a member of the vlans.

Tab "VLANs" Port 5 is not a member of 11, 1 and 12.

Also Switch Upstairs... Port 1 is not a member of 11, 1 and 12.
by RcRaCk2k
Fri Apr 11, 2014 9:39 am
Forum: SwOS
Topic: Port name or description
Replies: 7
Views: 5363

Re: Port name or description

I hope this feature gets implemented in next release.
by RcRaCk2k
Thu Apr 10, 2014 11:06 pm
Forum: SwOS
Topic: RB260GS - SFP Module - Not working - no RX just TX
Replies: 6
Views: 8718

Re: RB260GS - SFP Module - Support for 40km and 80km Modules

The Module provides 19dB of output. The physical attenuation is at 12dB, so 7dB is enough for the link to work. I replaced the TP-Link MC220L with a RB260GS, the link comes up but i have no RX. On Side A, the SFP-Link-LED is on. On Side B the LED is off.. That is odd. SFP Auto Negotiation Module Pre...
by RcRaCk2k
Wed Apr 09, 2014 9:26 pm
Forum: SwOS
Topic: RB260GS - SFP Module - Not working - no RX just TX
Replies: 6
Views: 8718

RB260GS - SFP Module - Not working - no RX just TX

Hi!

Currently i am using TPLINK-MC220L. This Device supports only modules up to 10km.
I have installed a 40 km Module, but after 15km the signal were loss.

Now i like to use RB260GS. Is this Model able to power up a 40km SFP Module?

Thanks.
by RcRaCk2k
Sat Jul 28, 2012 5:43 pm
Forum: SwOS
Topic: The Crazy Ghost Loop ! ! ! Killing my network
Replies: 5
Views: 5689

Re: The Crazy Ghost Loop ! ! ! Killing my network

I also have problems with loops. But my setup is very simple and was working, before i used RB250GS! I think, there is a problem. Also a friend told me, that his RB250GS was stop working after few days. My Network-Setup: HP ProCurve 1700-8G PORTS | | | | | | | | 1 2 3 4 5 6 7 8 V1 V1 V2 V2 V2 V2 T2,...
by RcRaCk2k
Sat Jul 28, 2012 5:24 pm
Forum: SwOS
Topic: Speed Limitation | Egress & Ingress Rate
Replies: 3
Views: 6073

Re: Speed Limitation | Egress & Ingress Rate

Now i am really confused. I've tested to input the value 1250000 in the input-field but the last zero was not taken. So the input-field was only 125000. Today, it was working. I don't know why ;) Wishlist for Bandwidth-Limitation: * Accept values 128k, 6M, 12M, 20M (kBit, MBit) * Set field-size to 8...
by RcRaCk2k
Thu Jul 12, 2012 8:00 pm
Forum: SwOS
Topic: Speed Limitation | Egress & Ingress Rate
Replies: 3
Views: 6073

Speed Limitation | Egress & Ingress Rate

Hi all! How can i limit a port to 10 MBit down and 1 MBit up? The wiki told me that the values in egress & ingress are in bps (so i think bytes per second?) but i am not able to add so high values to the Input-Field. 10 MBit = 10 * 1000 * 1000 / 8 = 1.250.000 bps But i am only able to write 125....
by RcRaCk2k
Fri Jun 22, 2012 8:07 pm
Forum: General
Topic: Bad latency on P2P-Link MikroTik SXT G-5HnD
Replies: 6
Views: 4118

Re: Bad latency on P2P-Link MikroTik SXT G-5HnD

Because the MikroTik SXT G-5HnD offers Gigabit Ethernet and was sold with 200 MBits real TCP throughput declaration. SXT 5HnD is a low cost, high speed 5GHz wireless device. Dual polarization 802.11n and Nv2 TDMA technology help to achieve even 200Mbit real throughput speed http://www.mikrotik-shop....
by RcRaCk2k
Wed May 16, 2012 10:22 am
Forum: SwOS
Topic: VLANs are not isolated from each other?
Replies: 9
Views: 8650

Re: VLANs are not isolated from each other?

I have the same problem! running SwOS 1.6 and can see DHCP-Discoverys (255.255.255.255 ff:ff:ff:ff:ff:ff) on VLAN2 from a client that is connected to VLAN1 on the same RB250GS Switch. /---------------------------\ | SWITCH RB250GS 5-Port | | Ports | | 1 2 3 4 5 | \---------------------------/ | | | ...
by RcRaCk2k
Mon May 14, 2012 2:54 pm
Forum: SwOS
Topic: RB250GS and port description
Replies: 2
Views: 2558

Re: RB250GS and port description

+1 will love this feature!
by RcRaCk2k
Tue May 08, 2012 10:59 am
Forum: General
Topic: Bad latency on P2P-Link MikroTik SXT G-5HnD
Replies: 6
Views: 4118

Re: Bad latency on P2P-Link MikroTik SXT G-5HnD

Yes. CCQ was bad but now it is at 98%. NV2 was enabled all the time. Also NStream is enabled as seen in other howto. I've spent lot of time to understand how MikroTik Hardware is working, and spent a lot of in HowTos also. This is my configuration on the "Station Bridge" side: http://dl.dr...
by RcRaCk2k
Mon May 07, 2012 10:51 pm
Forum: General
Topic: Bad latency on P2P-Link MikroTik SXT G-5HnD
Replies: 6
Views: 4118

Bad latency on P2P-Link MikroTik SXT G-5HnD

Dear MikroTik Users! I am very new to the MikroTik Hardware. I switched from UBNT NanoBridges M5 22dBi to MikroTik SXT G-5HnD and have some questions about latency. Before i switched from UBNT to MikroTik, my ping was between 1.2ms and 2.5ms with AirMAX (TDMA) enabled. To setup both MikroTik SXT G-5...