Good day,

no problem on 6.41.x, problem begin with 6.42.2.
Affected devices are 1100AHx2 and 751G-2HnD, CCR without issue.

Pavel

Hi, I have a two CCR1036 each with wan interface connected to unknown Cisco switch. Only those wan ports were seding "rx fcs error". It is not problem related to cat6 cable or ethernet port self. When I disable autonegotiation I receive more rx fcs errors. It seems that combination of auto...

Hi, I'm just curious what cause in my setup of 2x CCR and 4x CRS enorm transmitiing of broadcasts on interfaces at bridge, doesn't matter if trunk or access ports of a few vlans? i have one bridge on each device and a few vlans, all devices connected with trunk ports. I have for example 8.000 rx and...

Hi, I have a router CCR1036 directly connected to a switch CRS226 via vlan trunk on bridge1 (with rstp) through sfpplus1 port. There is a IP device connected to ether1 access port on CRS226. WAN is ether8 port on CCR1036. I can do ping from both, CCR1036 and CRS226, to IP device. I succesfully run ...

Hi, is proxy-arp on v6.41rc61 working? I have CCR1036 directly connected to CRS226. I have vlan trunk on bridge between them. On CRS226 I have acces port and connected device with IP, i can ping IP from router and switch. I configured L2TP/IPsec and OVPN services, both are working, but I can't ping...

Hi, I have a router CCR1036 directly connected to a switch CRS226 via vlan trunk on bridge1 (with rstp) through sfpplus1 port. There is a IP device connected to ether1 access port on CRS226. WAN is ether8 port on CCR1036. I can do ping from both, CCR1036 and CRS226, to IP device. I succesfully run L...

Hi, I raise a new topic Bridge HW-Offload and VLAN-Filtering with CRS226-24G-2S+RM at v6.41rc52 here viewtopic.php?f=1&t=127805 , maybe someone can explain issue.

Hi, I would have bridge with hw-offload with vlan tagged trunk and untagged access ports. For example, ether1 as vlan trunk port, ether2 as vlan10 access port and ether3 as vlan20 access port: /interface bridge add name=bridge1 vlan-filtering=no /interface bridge port add bridge=bridge1 interface=et...

Finally it is works on 6.38, thanks.

Nobody?

Hi,

I didn't find the answer on Google or this forum yet. How can I redirect http to https in input chain. My only allowed service is https (http is disabled). I don't want to solve if I'm on http or https in browser if I'm connecting to WebFig. Thanks.

Pavel

Hi, does someone test v6.26 on rb1100ahx2? I upgraded routeros from v6.22 to v6.26 and router freezed, after power off/on router rebooted with v6.22 again.

I see my current firmware is 3.10 and latest is 3.18, should I upgrade firmware before upgrade routers? Thanks for sharing info.

Thanks for answer.

Can you please recommend Mikrotik router with CPU, which is able to handle 20/20Mbps traffic over IPSec with AES-128/MD5 without hardware encryption support?

Only those two Mikrotik routers has hardware encryption support?

- RB1000
- RB1100AHx2

Hi, on center of network topology star I'm using RB1100AHx2 which has AES offloading support. We have couple of branches connected to RB1100AHx2 by IPSec. On branches we are using RB751G-2HnD routers on 20/20Mbps lines. For normal using it works, but when someone fill the link of 20Mbps, doesn't mat...

Hi, I have recently bought Mikrotik RB1100AHx2 and I'm really disappointed that I can't use Metarouter feature. I have red many forums etc, everybody wrote that Metarouter feature is working on RB1100AH not on two core CPU version. I have latest stable ROS 5.16 and when I try import virtual OpenWRT ...