Community discussions

MikroTik App

Search found 11 matches

by bdlsoluciones
Fri May 25, 2018 10:53 am
Forum: Scripting
Topic: UPTIME variable on PPP/Profiles/script
Replies: 0
Views: 821

UPTIME variable on PPP/Profiles/script

Hi there:
It would be great if up-time local variable is avaible when "on down" script in executed.

Thanks!
by bdlsoluciones
Wed Feb 14, 2018 2:01 am
Forum: General
Topic: List of devices with beeper
Replies: 4
Views: 2944

List of devices with beeper

Is there any list of Mikrotik devices with beeper? Like hEX/RB750Gr3.
It can't be used in filtered view of product.

Thank you.
by bdlsoluciones
Sun Apr 16, 2017 12:52 am
Forum: Wireless Networking
Topic: Client side minimum wireless signal
Replies: 0
Views: 583

Client side minimum wireless signal

Hi everyone: I'm using a RB client in a Cisco's wireless network. Client is on the move, and spend too must time waiting before jump to new AP. I can't change any setting of WiFi: channels, encryption, etc. Is there any value I can adjust to force RB to connect to a new AP if signal is under certain...
by bdlsoluciones
Fri Jan 20, 2017 3:50 pm
Forum: General
Topic: Is MUM attendance enough to maintain certifications?
Replies: 3
Views: 1032

Re: Is MUM attendance enough to maintain certifications?

Thanks Normis.
I thought that attendance at MUMs increases certifications expiration.
I want to attend to MTCIPv6E course and get certified but my MTCNA and MTCRE expired in 2016.

Do I need to repeat again MTCNA course and examen?
Thank you.
by bdlsoluciones
Fri Jan 20, 2017 11:56 am
Forum: General
Topic: Is MUM attendance enough to maintain certifications?
Replies: 3
Views: 1032

Is MUM attendance enough to maintain certifications?

Is MUM attendance enough to maintain certifications?
Can anyone clarify this please?

Thanks.
by bdlsoluciones
Mon May 28, 2012 8:51 pm
Forum: Beginner Basics
Topic: how to isolate vlan
Replies: 10
Views: 28437

Re: how to isolate vlan

Thx,

But if I have more than 2 vlans, do I have to isolate them in such way? There will be a lot of rules, each network isolate from others.
I fixed it with one rule per vLan:

chain=forward action=drop in-interface=vLan7 dst=192.168.7.0/16

Internet access still works.
by bdlsoluciones
Wed May 23, 2012 12:55 am
Forum: Beginner Basics
Topic: Access vLan device from other vLan
Replies: 3
Views: 1467

Re: Access vLan device from other vLan

More generally, routeros will route any network to any network unless you have a drop rule in the forwarding chain! If you have no rules in the forwarding chain and the router has internet access on a port then you should add some! That's right, perfectly explained what I tried to say with "Yo...
by bdlsoluciones
Wed May 23, 2012 12:29 am
Forum: General
Topic: Cannot Ping between Vlans - Help please
Replies: 3
Views: 2274

Re: Cannot Ping between Vlans - Help please

By default my Mikrotik didn´t allow me to access devices from other vLans.
I was thinking and testing why my Mirkotik wasn´t routing data between vLans and I finally found the problem... Printer´s network mask was badly typed when the device was configured... :?

Thanks!
by bdlsoluciones
Wed May 23, 2012 12:26 am
Forum: Beginner Basics
Topic: Access vLan device from other vLan
Replies: 3
Views: 1467

Re: Access vLan device from other vLan

SOLVED: Mikrotik allows communication between vLans by default.
You have to "isolate" vLans if you want to secure them.

The problem was printer´s netmask (manually typed in the device...)
by bdlsoluciones
Tue May 22, 2012 8:42 pm
Forum: General
Topic: Cannot Ping between Vlans - Help please
Replies: 3
Views: 2274

Re: Cannot Ping between Vlans - Help please

Hi there: I have same problem, can´t ping from mis devides in vLan30 to a pirnter in vLan20. I use its IP: "ping /t 10.0.20.2" from a PC in vLan30 with 10.0.30.XXX IP. By default my Mikrotik didn´t allow me to access devices from other vLans. I tried with with NAT and FILTER rules but I ca...
by bdlsoluciones
Thu May 10, 2012 9:00 pm
Forum: Beginner Basics
Topic: Access vLan device from other vLan
Replies: 3
Views: 1467

Access vLan device from other vLan

Hi everyone:

I´m triyng to access to a printer witch IP is 10.0.20.2/22 and vLan ID 20 from computers in 10.0.30.0/23 and vLan ID 30.
Can anyone help me to setup that please?

Thank you.