What is the maximum bandwidth that you want to apply for each ethernet port?

Hello, I never used BFD protocol and i just read in one of my MK logs this some entries about BFD that i suspect that was an attack attempt. Can someone explain briefly to me what are doing that entries on my log (screenshot attached to this post) and if that is an attack, how can i block it? Thank ...

Hello,
A client of mine uses a standar pop3/smtp account outside of my network. Using my network, when he sends an email he gets this message:

Relaying denied. IP name possibly forged [MY PUBLIC IP HERE]

This problem started a few days ago

Anyone haves a clue about this issue?

Thanks!

If you add a rule with random 50, then 50% of any packets that will go through this rule will take the action that is specified for this rule.
For other 50% of packets, this rule will act as if passthrough was the action. (the packets will not hit the rule)

Thank you very much!

Have a nice day

The wiki DOES explain it. http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/Filter random (integer: 1..99; Default: ) Matches packets randomly with given probability. That's the only explanation in the wiki. I don't understand it so well because there's no example. Can you give me a hand with this? ...

v6.2 is here: http://www.mikrotik.com/download/share/ ... be-6.2.npk (MIPS-BE). Change the name to get other build files.
From Normis post in this topic: http://forum.mikrotik.com/viewtopic.php?f=2&t=51835

Thank you!

What's new in 6.2 (2013-Jul-16 13:48): *) dhcp server - framed routes are now also added to the server routing table; *) dhcpv6 server - added binding-script option; *) proxy - allow multiple src-address for ipv4 and ipv6; *) eoip,gre tunnels could occasionally crash multicore router; *) fixed bug ...

where can i find routeros 6.2 changelog

Normis just posted the Changelog!

What kind of switch do you have? a cheap one? (kinda home switch) How much traffic passing through?

Hello,
I was checking out the "random" function in the FIREWALL/NAT wiki and doesn't explain any further.
Anyone can tell me how this function works?



Thanks in advance!

Dear Mikrotik Team, My name nara, i live in cambodia, i have one mikrotik routerboard 750GL and i made it as hotspot i connect port1(192.168.101.1) to my local network and port2 is hotspot and dhcp range 192.168.168.2... i have access point inside the hotspot, mean the ip of access point is the sam...

Another +1 for Bugtracker!

Enviado desde mi GT-P5110 usando Tapatalk 2

Hello. I have some static route and it may be active or not. How could I check activity of the route (find the route by name,comment or number) in script and do something depending of result? To check activity just use netwatch (TOOLS - NETWATCH). There you can put a script that does anything when ...

Hi, I have the following problems after upgrading from 5.25 to 6.0: 1. Graphs for Memory and Disk Usage don't work, when I click on them I get this error: ERROR: NO ACCESS! 2. Memory usage is very high, I get only about 20MB free on 6.0, while using 5.25 I had about 100MB free. 3. I see that 3 meta...

Hello folks, I am brand new to MikroTik. I have a situation where I have a Proxy behind a Mikrotik box. I am trying to enable Hotpot authentication on the LAN side. As I understand from Logic that, Mikrotik will see the IP of my Proxy and redirect it to a hotspot page. My problem is that I have lot...

I'm using a CCR1036 with RouterOS v6.0 and The Dude could not reach the SNMP agent. If I restart the services it works for some minutes, then stops working again.
I think it happen with my AHx2 too. Thank you.

The same here

Enviado desde mi GT-P5110 usando Tapatalk 2

Hello, I recently installed rOS 6.1rc1 (previosly i had 6.0rc14) on my CCR1036. Since the upgrade, the SNMP agent stop working. When The Dude sends the info request to the CCR, the request arrives but the CCR doesn't returns the requested information. Also with this upgrade, the serial port also sto...

On Up: [code1=ros]/ip dhcp-client set [find name="ether1"] disabled=yes;[/code2] On Down: [code1=ros]/ip dhcp-client set [find name="ether1"] disabled=no;[/code2] HTH, In rOS 5.x didn't work for me (i just tried it), but like this yeah: /ip dhcp-client set [find interface="...

On Up:

ros code

/ip dhcp-client set [find name="ether1"] disabled=yes;

On Down:

ros code

/ip dhcp-client set [find name="ether1"] disabled=no;

HTH,

Thank you so much!

Hi! Im trying to monitor a gateway of my ISP. Im using netwatch for that purpose. Basically, i need that when that GW is unreachable (DOWN) the netwatch enables the DHCP-Client for an eth interface (in this case, ether1), and when is UP, the opposite: disable that DHCP-Client over that eth. When the...

I have recently upgraded an RB750GL from rOS 5.25 to 6.0 and the simple queues stop working. Each queue have been working perfectly fine on 5.25 but on 6.0 (with firmware upgraded also) stop processing traffic. The queues only have the client IP address (for ex: 10.1.191.10) in "Target" a...

6.0 is buggy at the moment. Downgrade for now.

Hahaha i noticed. Thank you!

I have recently upgraded an RB750GL from rOS 5.25 to 6.0 and the simple queues stop working. Each queue have been working perfectly fine on 5.25 but on 6.0 (with firmware upgraded also) stop processing traffic. The queues only have the client IP address (for ex: 10.1.191.10) in "Target" an...

I have recently upgraded an RB750GL from rOS 5.25 to 6.0 and the simple queues stop working . Each queue have been working perfectly fine on 5.25 but on 6.0 (with firmware upgraded also) stop processing traffic. The queues only have the client IP address (for ex: 10.1.191.10) in "Target" a...

Hello! I just downloaded the API for Delphi. I tested many commands with the example app but /system/reboot doesn't work.

Any clue?

Thanks in advance!

Hi! I just configured a hotspot network and i need to allow certain websites and drop the rest. I put some forwarding rules in the firewall allowing using content (Ex: "facebook") and a rule to drop the rest, but doesn't seem to work with the hotspot. I placed the rules above and below the...

Thank you!

Im starting to customize the webfig interface. I have two questions: 1) Can i disable the "Design skin" button? 2) How can i change the login page and put any logo instead the "WebFig vX.X" logo that appears in the upper-right corner once you logged in the webfig? I will apprecia...