Community discussions

Search found 24 matches

by BMena
Fri Feb 15, 2019 4:01 pm
Forum: The Dude
Topic: Mass upgrade loses wireless interface!!!!!
Replies: 3
Views: 470

Re: Mass upgrade loses wireless interface!!!!!

on those devices, go to System -> Packages and check if the wireless package is enabled. Up to version 6.34 they had 2 wireless packages that could be activated one at a time, wireless-cm2 and wireless-fp. My old R52Nm cards only worked with wireless-fp. It got fixed in 6.36 and they removed wireles...
by BMena
Tue Feb 05, 2019 4:25 pm
Forum: The Dude
Topic: Backup DUDE 3.6 for version 6
Replies: 1
Views: 360

Re: Backup DUDE 3.6 for version 6

I did upgrade from dude 4.0 beta 3 to version 6.3something.
Try upgrading your DB first to 4.0.
by BMena
Fri Jan 18, 2019 1:27 pm
Forum: General
Topic: High CPU Usage (CCR1036-2S+)
Replies: 5
Views: 430

Re: High CPU Usage (CCR1036-2S+)

Found it, it was packet sniffer. Almost a year ago it happened in one of my routers. Yesterday it happened to 4 routers, one at a time, I only noticed it was the packet sniffer when it was affecting the last two... Someone changed the default memory limit and file limit to 1000000000, changed the fi...
by BMena
Thu Jan 17, 2019 10:03 pm
Forum: General
Topic: High CPU Usage (CCR1036-2S+)
Replies: 5
Views: 430

Re: High CPU Usage (CCR1036-2S+)

unfortunately this router is not implementing any of the functions shown in the presentation :(
by BMena
Thu Jan 17, 2019 6:50 pm
Forum: General
Topic: High CPU Usage (CCR1036-2S+)
Replies: 5
Views: 430

High CPU Usage (CCR1036-2S+)

Second time just today that all Cores got stuck at 100%, profiler shows Networking service using most.
v6.43.8
Its an edge router
Anybody saw similar problem?
HIGHCPU.png
by BMena
Wed Dec 26, 2018 1:22 pm
Forum: General
Topic: Winbox port 8291 is invalid !
Replies: 7
Views: 2033

Re: Winbox port 8291 is invalid !

The RB probably got hacked, if so you'll mac-telnet to it, providing the hacker didn't change the password, there, check in ip-services if the winbox port was changed
by BMena
Mon Dec 17, 2018 9:28 pm
Forum: RouterBOARD hardware
Topic: CRS317 Problems with 100MBit Devices / What a shame
Replies: 28
Views: 3342

Re: CRS317 Problems with 100MBit Devices / What a shame

Are you booting RouterOS or SWOS?
I had these compatibility problems with SWOS, booted in ROS mode and It looks more stable.
by BMena
Sat Oct 20, 2018 8:35 pm
Forum: RouterBOARD hardware
Topic: Counterfeit CCR1036?
Replies: 4
Views: 1239

Counterfeit CCR1036?

This morning one of my CCR1036-12G-4S stopped working. It wasnt turning on anymore. I decided to dissassemble it to take a look, and boy was I surprised... The Power Supply installed looks like one of those U$ 1,00 PSU you can find at Aliexpress,it was also installed very amateurly, using insulating...
by BMena
Fri Jun 08, 2018 11:30 pm
Forum: RouterBOARD hardware
Topic: 0_о
Replies: 6
Views: 955

Re: 0_о

He quick set 20mhz.
But it applied 20/40mhz XX
by BMena
Tue Apr 10, 2018 3:04 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 123
Views: 16694

Re: CCR1072 watchdog reboot

Could you find a fix? After 20 days my CCR rebooted out of the blue again... So it becoming stable after removing only 1 PSU was just coincidence. Put the PSU back in place, better to have it rebooting than risking it stopping. have you upgraded your hardware routerboard, with last RouterOs version...
by BMena
Sat Mar 24, 2018 2:48 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 123
Views: 16694

Re: CCR1072 watchdog reboot

Could you find a fix? After 20 days my CCR rebooted out of the blue again...
So it becoming stable after removing only 1 PSU was just coincidence. Put the PSU back in place, better to have it rebooting than risking it stopping.
by BMena
Wed Feb 07, 2018 1:05 pm
Forum: Forwarding Protocols
Topic: Strange readings in traffic monitor
Replies: 4
Views: 590

Re: Strange readings in traffic monitor

nobody else having this issue?
by BMena
Wed Jan 31, 2018 1:23 pm
Forum: Forwarding Protocols
Topic: Strange readings in traffic monitor
Replies: 4
Views: 590

Re: Strange readings in traffic monitor

Four 1036-2S+ with ROS 6.39.3 and Firmware 3.33 and 3.27
One 1072 with ROS 6.39.3 Firmware 3.39

Tried one 1036 and the 1072 with Firmware 6.40.4 too.
I only connect from IP.
by BMena
Tue Jan 30, 2018 6:47 pm
Forum: Beginner Basics
Topic: Firmware upgraded to 6.41, is this okay?
Replies: 3
Views: 442

Re: Firmware upgraded to 6.41, is this okay?

Are you using it as AP-Bridge?
I ran into a bug with version 6.40.4, the frequency I type is ignored unless I set the frequency-mode as superchannel.
You can check in the Status page what frequency it's really in use.
by BMena
Tue Jan 30, 2018 6:09 pm
Forum: Forwarding Protocols
Topic: Strange readings in traffic monitor
Replies: 4
Views: 590

Strange readings in traffic monitor

Hi, I have this strange "jumpy" readings showing in winbox traffic monitor: ix bug.png No, I'm not in Japan, traffic was not 87.8gb in that interface :lol: It was about 1.4gb that very moment. All interfaces had their traffic messed up, that one with 96.0kbps had in truth 2.2kbps. It happens in ever...
by BMena
Tue Jan 30, 2018 1:47 pm
Forum: RouterBOARD hardware
Topic: CCR1072 watchdog reboot
Replies: 123
Views: 16694

Re: CCR1072 watchdog reboot

I was also having my CCR 1072 rebooting, but mine was "without proper shutdown" instead of "by watchdog". Sent a e-mail to support@mikrotik and he said he thinks the hardware is faulty.. But then another CCR 1072 I have, about 300km away, showed the same problem. My solution for both was disconectin...
by BMena
Tue Jan 30, 2018 12:19 pm
Forum: Beginner Basics
Topic: CCR 1072 Fast Path not active
Replies: 1
Views: 317

Re: CCR 1072 Fast Path not active

Alright, after rebooting the router fast path went active.
Gotta love mikrotik, lol.
by BMena
Mon Jan 29, 2018 7:54 pm
Forum: Beginner Basics
Topic: CCR 1072 Fast Path not active
Replies: 1
Views: 317

CCR 1072 Fast Path not active

Hello, i've checklisted the Fast Path at https://wiki.mikrotik.com/wiki/Manual:Fast_Path but still Fast Path does not activate.

I can make Fast Track work but I have no need for it.

My ROS version is 6.39.3, anyone have any tips for me?
by BMena
Tue Oct 18, 2016 9:34 pm
Forum: The Dude
Topic: Dude v6.37 execute on server question
Replies: 3
Views: 1292

Re: Dude v6.37 execute on server question

Tried the latest 6.38rc15, still not working. Guess I still won't be able to migrate =/
by BMena
Mon Oct 03, 2016 4:28 pm
Forum: The Dude
Topic: Dude v6.37 execute on server question
Replies: 3
Views: 1292

Re: Dude v6.37 execute on server question

I noticed this in my log: oct/02/2016 18:40:20 system,error,critical login failure for user admin from 127.0.0.1 via dude oct/02/2016 18:40:20 system,error,critical login failure for user admin from 127.0.0.1 via dude oct/02/2016 18:40:20 system,error,critical login failure for user admin from 127.0...
by BMena
Thu Sep 29, 2016 3:35 pm
Forum: The Dude
Topic: Dude v6.37 execute on server question
Replies: 3
Views: 1292

Dude v6.37 execute on server question

Hi, I cannot get "execute on server" to run a script saved in the routeros, i'm issuing the command:
ros_command("/system script run liga")

Does this already work? Execute on server just got implemented back.
by BMena
Mon May 21, 2012 7:10 pm
Forum: Scripting
Topic: How to translate this command to PHP-API?
Replies: 7
Views: 1463

Re: How to translate this command to PHP-API?

Yeah pretty sad, is there any modded API out there that supports it?
by BMena
Fri May 18, 2012 7:40 pm
Forum: Scripting
Topic: How to translate this command to PHP-API?
Replies: 7
Views: 1463

Re: How to translate this command to PHP-API?

Doesnt work, it returns everything, doesnt filter :(
by BMena
Thu May 17, 2012 9:28 pm
Forum: Scripting
Topic: How to translate this command to PHP-API?
Replies: 7
Views: 1463

How to translate this command to PHP-API?

This: /ppp active print where address~"^172" It returns all adresses starting with 172. I couldnt find a way o do it in the PHP API, this is one of the commands i tried: $API->write('/ppp/active/print',false); $API->write('=where=',false); $API->write('?address=~172.'); $READ = $API->read(false); $A...