MikroTik

aoakeley

Currently we are at the latest version 6.46.5.Some of these routers support critical systems in a vrrp configuration while others support backbone. We depend on Mikrotik to deal with this annoying issue. So far we have confirmed that unclassified processes in Tool/profile have increased before the ...

aoakeley

Have you had any feedback on what the fault was? . No. No feedback. Have replaced 3 under warranty now. And I have one of the ones that was previously replaced, and had been running fine since end of Jan now inaccessible again. So either there is a systemic issue in this model or there is something...

aoakeley

This is a reply from mikrotik support. Has anyone done this ?

Yes. see my previous posts

aoakeley

If you are not using a “standard configuration“ then you likely don’t want to use a firewall rule or wizard.

Sorry - what's a standard configuration?

I'm serious... what you consider to be standard will not be what someone else does.

aoakeley

After obtaining supout.rif files by console cable, MikroTik have organised warranty replacement for the two 1100 units exhibiting this issue.

And yet another 1100AHX4 with this issue.
The previous 2 units which were replaced under warranty have not had a recurrence of the issue.

aoakeley

I have got MIKROTIK RB750Gr3, cca 3y. Now I have a problem, when I tried to connect by RDP in my LAN from interenet, connecting with one computer is unstable, falls down (very very often), slow. To other computer it is OK. both computers are OK, only connecting by RDP is so strange. I use Windows 1...

aoakeley

Don't do important work using your phone or with a baby on your arms...

Advice for life

aoakeley

It's not clear how exactly are those routers connected and you didn't show any part of config. Fix that, provide more info and your chance to get useful advice will increase. on ISP A router i need to do port forwarding for IP 100.80.20.75 port 22,80 & 443 @Syeed has given you the correct solution....

aoakeley

/ip firewall filter
add action=accept chain=input comment="Allow Http" dst-port=80 protocol=tcp

Did you mean to open your router web interface to internet access? that is what this rule will do.

aoakeley

Yes, these connection attempts take place regularly every night! In my case L2tp ipsec is used. Special logging is not turned on but red notifications are displayed. This IP address has been displayed for a very long time on some 30 mikrotik machines that use ipsec vpn. If tunnel mode is used and e...

aoakeley

Hello, now just doing a simple click without any confirm, we can remove/disable/do whatever without any confirm. In my opinion should be an option in settings like "ASK CONFIRM FOR EVERY OPERATION" and when it's enabled, if we try to Disable/Remove/Do whatever on any item/rule, a confirm appear so ...

aoakeley

Perhaps if Speedify just creates the configuration script needed.. Agreed. I don't think mikrotik should be adding additional code to support fringe implementations at this stage (or if ever). There is so much work to do on core functionality first. If it can be implemented within the current funct...

aoakeley

... and I was just about buying a 4011 . . . should I do that or not .. it's for a main network gateway, PPPoE, dude, . . .

I have plenty running that have no issue. I think the devices with this issue are very few.

aoakeley

We have several RB4011 and exactly the same happens to us. Randomly some MikroTik is no longer accessible by management, and in Dude appears the services "memory, disk and cpu" down, Regards, - Use a console cable to get a supout.rif file while the router is in the non responsive state (might as we...

aoakeley

We have quite a few MikroTik units deployed, but will have to start moving away from Mikrotik if there's no real solution to this. We have hundreds (thousands??) of MikroTik units in the field, and only 2 exhibiting this issue. So don't throw the baby out with the bath water. After obtaining supout...

aoakeley

It is incredible that since June this was reported and nobody from Mikrotik did anything. I suspect that they did not have enough information to replicate the issue and develop a fix. Like you many of my devices were a long way away, and they asked to have a serial cable plugged in. This was diffic...

aoakeley

I notice you have found this other related thread. Jut putting a link here so others can also find it.

viewtopic.php?f=2&t=149062

aoakeley

I have two 1100AHx4 with this issue, and an open case with Mikrotik (Ticket#2019100722004559). I have just been able to connect in with a serial cable and generate a supout file.

I am not running Dude on them.
SNMP is enabled though.

aoakeley

Wireless also not working on 2011UAS-2HnD
Factory default config on unit.
Could see SSID but unable to join on both Windows laptop and iPhone.
I will wait for Beta 4, and post full report then if still not working.

aoakeley

Any news about date of release Ros v7?
Maybe Christmas gift

Christmas in July?

aoakeley

...

How to block access to my local network from guest IP range 192.168.101.0/24.

Thanks
YP

Start by posting in the correct forum. Try Beginner Basics viewforum.php?f=13

aoakeley

Please help me fix it, thank you!
.

Please post in correct forum viewforum.php?f=13 , thank you!

aoakeley

Feature Request Are you sure Button when disabling interface We have a practice of labeling all interfaces with comments we have had some techs accidentally hit the disable interface button which is fine sometimes but if it is a backhaul port you are in a lot of trouble because this kills even mac ...

aoakeley

After reading sindy's Multiple Road Warrior L2TP/IPsec clients behind NAT - solved thread, and after my brain stopped hurting, ......... It works, but now my brain hurts again. You sir, are a deadset legend. I used this to solve an issue with The Dude running on a router, and needing to change the ...

aoakeley

> Please review a possibility to add Existing device to the another or same map. I would just settle for "add existing device to any map" Maybe I am mistaken, but I just setup The Dude. Added in half a dozen devices in the device list, but cant find any way to then add them to a map once I have crea...

aoakeley

Still got this issue in 6.41. I've tried deleting connections but this doesnt always work. In this case the only thing to do is to reboot it. But it gals me to do that - this is about the only thing I have to reboot Mikrotik for. How sad thats its something so basic. :-? Still in 6.42.3 I thought I...

aoakeley

Does it happen to someone else? Thank you Ah.. yes. I just installed 2 x LHG G-5acD in a P2P link. - NV2 was terrible - 802.11 was better - nstream was the best I had not made the connection with it being the arm chip.... but I can certainly say in these devices with arm; nv2 was terrible Andrew

aoakeley

While attempting to get my wireless router working (a Netgear WPN824 v3), I managed to turn the DHCP off.

Your post has absolutely nothing to do with this topic, and really nothing to do with Mikrotik. You would be better off posting somewhere else.

aoakeley

The short answer is no if you think you can triple the speed or throughput of one connection. Not necessarily. Get a VM somewhere close to your location, install RouterOS on it, the use EoIP to bond the connections. https://www.duxtel.com.au/docs/presentations/Fun-with-EoIP.ppsx If you have an AWS ...

aoakeley

configure the APN Profile in the LTE menu to not to add Default route and DNS. I have one device where this does not work. No matter what I configure in the default APN profile it still allocates a default route with distance 2 This really need this to be an opt-in option, not a default that you ca...

aoakeley

configure the APN Profile in the LTE menu to not to add Default route and DNS.

Thanks. That solves the route and DNS issue.

Any way to completely stop it dynamically creating a DHCP Client ?

aoakeley

Finding these changes introduced back in 6.41 to be most inconvenient *) lte - automatically add "/ip dhcp-client" configuration on interface; Can we have a way to turn off this behavior completely? *) lte - changed default values to "add-default-route=yes", "use-peer-dns=yes" and "default-route-dis...

aoakeley

Hello, since upgrading to current 6.42, my LTE now has dhcp-client enabled. My lte interface configuration is actually static as I use an USB wireless AP (detected as lte) and the USB device default route is aimed as my mikrotik so a dynamic IP is not really practical . How can I disable this new d...

aoakeley

Hello, since upgrading to current 6.42, my LTE now has dhcp-client enabled. My lte interface configuration is actually static as I use an USB wireless AP (detected as lte) and the USB device default route is aimed as my mikrotik so a dynamic IP is not really practical . How can I disable this new d...

aoakeley

Hi Guys, Has anyone had any luck getting to the bottom of this? I am experiencing this on a number of RB3011s Thanks. I was also experiencing this on all the 3011's we have. But it seems to be solved in 6.35.2. So far my test router has been running with the bridge interface in place for a day now ...

aoakeley

Hi All, It seems that the 320U does not support the "AT+CPIN?" command arriving on its data port when operating in Direct IP mode. This is the command that appears in the RouterOS logs when the device is in LTE mode, so perhaps RouterOS is simply not switching channels when the device is in LTE mod...

aoakeley

So we are in 2015 now....

Any new of a dual band 951 or 2011 type board?

In fact Dual band anything?

aoakeley

I keep accidentally deleting saved devices from the list. Background: In the previous version you could click in the list and press a letter on the keyboard e.g. "b" to goto "Bobs Building" This does not work any more. Issue: If I press "r" to go to "Robs Rowing" it deletes whatever item I have sele...

aoakeley

Hi all Has anyone else seen this behavior? It has been a problem since day one for us but now the network is getting so large (close to 100 controllers) it's getting unworkable to manually process each MAC reregistration. Jon We saw this behavior if we used .local OR a real FQDN name for the hotspo...

aoakeley

Did you ever figure this out. Different script but same symptoms. Runs fine if I execute it from terminal, but not from Winbox or Netawatch this is all that is in the script /ip route set [find comment=WAN1] distance=10 /ip route set [find comment=WAN2] distance=20 ROS 6.6 - but tried some older ver...

aoakeley

HI, I use a routerboard RB750 as DSL gateway, the RB750 hase two connected interfaces: one to the modem (configured as bridge) second is connected to the local network. ...... it seems that the ISP is having another dhcp server connected to the network that deliver local IPs. thx for the help Or mo...

aoakeley

My correspondence with the MT support confirmed that PPP has speed issues: "when you will run a speedtest you will not get higher speeds that 25mbps on 4g, that is all.". .

Thanks. Now we know for sure.

Though in the real world I have never got about about 12mbps with ppp over 3/4G

aoakeley

Interesting. Has it been confirmed by the Mikrotik and does they plan to improve it? I have not sent anything into support, or had any confirmation from them. I think they have bigger issues at the moment with all the serious problems that need fixing in v6.x. Over time though I think it would be a...

aoakeley

So the same device does not have a ppp/dial-up connection when used with Windows laptop ? Or it does ? On the windows laptop it uses a connection manager supplied by the carrier (in this case Telstra Australia) that does not use PPP This post in an australian broadband forum implies that there is s...

aoakeley

Yeap, on 6.2 pre-release IPSec is still broken.

Has anyone tested this in production using 6.2 final release? changelog says its fixed........

Sorry - should have checked the 6.2 thread http://forum.mikrotik.com/viewtopic.php?f=2&t=75392 some people still having issues

aoakeley

For anyone else coming across this; the answer to the speed difference between when you have your 4G USB modem plugged into a laptop and when you run it through a Mikrotik is related to the PPP session. If you have a USB 3G/4G modem that requires PPP to connect then you speeds will suffer if the mdo...

aoakeley

I can also confirm issues with 6.1 and IPSEC with PSK. IT seemed to be chipset based. All routers on 6.1 MIPS-BE <-> MIPS-BE = YES MIPS-BE <-> PowerPC = NO MIPS-BE <-> x86 = NO POWERPC <-> x86 = YES POWERPC <-> POWERPC = unknown X86 <-> x86 = unknown Downgrading to 6.0 on all routers resolved the is...

aoakeley

I can't answer your question, but I have a ZTE-MF821(4G/LTE) USB modem plugged into a RB751G-2HnD. Plugged into my laptop I get a down/up speed of 60mbps/20mbps Via the RB751 I get a down/up speed of 12mbps/3mbps I thought it might have just been the CPU on the RB751 not keeping up, but when downloa...

aoakeley

@ymartin I can confirm the same. 1. Setup device (RB751U, v5.15) with 3 x virtual AP, hotspot, and a few other wireless goodies 2. Backup device 3. Restore to new device running same OS version (5.15) - wireless not configured properly on restored device back in original router use "export compact" ...

Search found 49 matches