Community discussions

MikroTik App

Search found 47 matches

by interlink
Tue Oct 18, 2011 6:59 pm
Forum: Wireless Networking
Topic: Nv2 802.11n not reporting Ptroughput
Replies: 3
Views: 813

Re: Nv2 802.11n not reporting Ptroughput

Try this... set wlanX wireless-protocol=nv2 Where wlanX should be replaced by your interface number, then I disabled the nstreme protocol y the nstreme tab in winbox. With this option set on the ap side, only nv2 clients can connect to the AP, yo should also set the distance between the 2 points in ...
by interlink
Mon Oct 17, 2011 11:08 pm
Forum: Wireless Networking
Topic: Nv2 802.11n not reporting Ptroughput
Replies: 3
Views: 813

Nv2 802.11n not reporting Ptroughput

Hi, does anyone seen that the ptroughput is missing when you configure, nv2-nstreme or nv2 only mode?
I´m using two RB600 with Ros v5.7 and SR71-15. Everithing seems to be right but the ptroughput.
by interlink
Tue Nov 30, 2010 1:37 am
Forum: General
Topic: Firewall max concurrent connections
Replies: 1
Views: 1717

Firewall max concurrent connections

Hi, does anyone knows wich is the limit of maximum concurrent connections, in terms of connections and mbps. I need to NAT thousands of private ip´s, and my cisco ASA 5520 is getting full of connections, actually supports 280000 and is touching the upper limit. My thoughts, is that is only limited b...
by interlink
Wed Jun 23, 2010 4:08 pm
Forum: Wireless Networking
Topic: can 433 board support 2 mbps load
Replies: 10
Views: 1464

Re: can 433 board support 2 mbps load

Shure, check this http://www.routerboard.com/pdf/routerbo ... _tests.pdf
Post your configuration or more info and maybe someone can help you.
by interlink
Wed May 05, 2010 9:27 pm
Forum: Wireless Networking
Topic: How to use integrated Spectrum Analyzer?
Replies: 6
Views: 2282

Re: How to use integrated Spectrum Analyzer?

I think that Atheros AR5413 must be supported, these cards are deployed everywhere.
by interlink
Wed Apr 08, 2009 9:25 pm
Forum: RouterBOARD hardware
Topic: RB450G is here!
Replies: 41
Views: 22964

Re: RB450G is here!

Not available yet, as you can see on ROS 3.22 [xxx@Ric-rtr] > system health [xxx@Ric-rtr] /system health> print fan-mode: auto use-fan: main active-fan: main voltage: 11.9 temperature: 49 [xxx@Ric-rtr] /system health> print oid voltage: .1.3.6.1.4.1.14988.1.1.3.8.0 [xxx@Ric-rtr] /system health>
by interlink
Thu Mar 12, 2009 4:29 pm
Forum: The Dude
Topic: RouterOS + Dude Web Interface problems...
Replies: 33
Views: 24623

Re: RouterOS + Dude Web Interface problems...

I have the same problem, any advance with the solution?...

regards
by interlink
Wed Mar 11, 2009 3:07 pm
Forum: The Dude
Topic: dude-3.1 under wine-1.1.5 = LocalMedium: postpone read
Replies: 18
Views: 6189

Re: dude-3.1 under wine-1.1.5 = LocalMedium: postpone read

I just get server dude server running on linux, but now the thing is that I can´t get the dude server listen on port 80 or any other port that give me web access (no apache running or any other web server). Just access the server with dude client. Anyone else with this issue too?. Is there any param...
by interlink
Wed Aug 06, 2008 2:31 pm
Forum: RouterBOARD hardware
Topic: RB493
Replies: 10
Views: 3318

Re: RB493

Does this unit work as a switch like the old RB 192?.
by interlink
Mon Jul 28, 2008 2:41 pm
Forum: General
Topic: Feature Request : TFTP server
Replies: 27
Views: 8040

Re: Feature Request : TFTP server

It will be usefull for me to have a tftp server to provide cm configuracion files.
by interlink
Thu Apr 03, 2008 3:42 pm
Forum: RouterBOARD hardware
Topic: Rb600 reboot fix
Replies: 47
Views: 18656

Re: Rb600 reboot fix

I succesfully upgraded the firmware to v 2.13 and the random reboots totally disapear. But now I have two minor issues. In winbox appears to be disabled enable polling and disable CSMA also framer policy and framer limit too, this is only on winbox, in the console everything is ok. The other issue i...
by interlink
Wed Mar 26, 2008 1:15 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 18679

Re: rb600 make reboot every day

For all the MT guys. Please give us (your customers) an official explanation of this issue and provide us a solution RMA, software upgrade, or whatever you want to solve this problem, Don´t make it public if you want provide us a response via mail, most of us have open trouble ticket on your support...
by interlink
Wed Mar 19, 2008 2:39 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 18679

Re: rb600 make reboot every day

Now ROS v3.5 is released, must we try it, or is pointless...?
by interlink
Tue Mar 18, 2008 4:08 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 18679

Re: rb600 make reboot every day

To MT support guys, is there any news with this trouble, are you working on a solution??.
Just to stay informed, don´t want to disturb :lol:
by interlink
Mon Mar 10, 2008 6:11 pm
Forum: RouterBOARD hardware
Topic: Why RB600 don´t have a Voltage Monitor?
Replies: 7
Views: 2483

Re: Why RB600 don´t have a Voltage Monitor?

Who says that rb600 has a voltage monitor. AFAIK the only one is rb333.

regards
by interlink
Mon Mar 10, 2008 12:07 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 18679

Re: rb600 make reboot every day

The stablest ROS version for me was 3.0, this one give me 1 day and a few hours uptime. Just for testing I invert the wlan mode now the unit that constantly reboots it is a station-wds, before that it was the ap-bridge. I will keep you informed guys! No success with this change, the unit keep reboo...
by interlink
Fri Mar 07, 2008 3:39 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 18679

Re: rb600 make reboot every day

The stablest ROS version for me was 3.0, this one give me 1 day and a few hours uptime.
Just for testing I invert the wlan mode now the unit that constantly reboots it is a station-wds, before that it was the ap-bridge. I will keep you informed guys!


regards.
by interlink
Wed Mar 05, 2008 12:53 pm
Forum: RouterBOARD hardware
Topic: rb600 make reboot every day
Replies: 106
Views: 18679

Re: rb600 make reboot every day

The same for me, i didn´t upgrade to 3.4, just using 3.3 with the same problem, but when the unit reboot autosupout.rif is not generated. My watchdog conf is very common. watch-address: none watchdog-timer: yes no-ping-delay: 5m automatic-supout: yes auto-send-supout: no send-email-to: send-email-fr...
by interlink
Tue Mar 04, 2008 12:57 pm
Forum: General
Topic: Temp graphing?
Replies: 6
Views: 1138

Re: Temp graphing?

You can see voltage on RB333 only from console. [xx@xx] > system health [xx@xx] /system health> print fan-mode: manual use-fan: main active-fan: main voltage: 27.1 For graphing purposes you can use mrtg and this linux script, or the dude with the oid. #!/bin/sh SW="/usr/bin/snmpwalk" uADDR="ip_addre...
by interlink
Mon Mar 03, 2008 12:59 pm
Forum: General
Topic: Temp graphing?
Replies: 6
Views: 1138

Re: Temp graphing?

I think temp monitor is only available on rb230, because is the only one rb that haves a temperature sensor.
by interlink
Mon Mar 03, 2008 12:55 pm
Forum: General
Topic: v3 Bridge Port Settings
Replies: 1
Views: 647

Re: v3 Bridge Port Settings

Yes, it will be very nice if someone of the mikrotik staff could clarify this parameters settings.
We use mikrotik mostly in ptp link and this seems to be important for this type of configuration.
by interlink
Wed Feb 20, 2008 12:48 pm
Forum: RouterBOARD hardware
Topic: rb333 kernel panic
Replies: 3
Views: 1152

Re: rb333 kernel panic

I suffered this issue too, random reboots, kernel panic...
Is this officially recogniced by mikrotik??, is there any solution on the way for this??.
We have deployed various of this cards, so we can´t just give up on them.
by interlink
Tue Feb 12, 2008 9:36 pm
Forum: Wireless Networking
Topic: 133c Prblem
Replies: 3
Views: 1069

Re: 133c Prblem

Connect directly your pc nic to the ether of the rb133c and use winbox to access via mac address, this can be done using the button with three dots on the right side of the address box.
Another method is to connect via serial port 8n1,
Default user is allways admin, and no password.

hope this help.
by interlink
Tue Feb 12, 2008 5:04 pm
Forum: RouterBOARD hardware
Topic: RB 600 reboots with kernel fail
Replies: 3
Views: 1326

Re: RB 600 reboots with kernel fail

Just downgraded to v3.0 and now have 2 hours uptime kicking 36mbps without problems and no reboots, same config and same hardware. Now I´m going to test in turbo mode.
Maybe the problem is a bug in v3.2.
by interlink
Tue Feb 12, 2008 12:33 pm
Forum: RouterBOARD hardware
Topic: RB 600 reboots with kernel fail
Replies: 3
Views: 1326

RB 600 reboots with kernel fail

Does anyone have seen this error on a RB600??. I have a ptp link testing in the lab with this configuration: Unit A 0 name="wlan1" mtu=1500 mac-address=xx:xx:xx:xx:xx:xx arp=enabled interface-type=Atheros AR5213 mode=ap-bridge ssid="xx" frequency=5825 band=5ghz scan-list=default antenna-mode=ant-a w...
by interlink
Wed Jan 16, 2008 3:27 pm
Forum: General
Topic: kernel failure on ROS v 3.0
Replies: 3
Views: 1340

Re: kernel failure on ROS v 3.0

Because, I dont have the watchdog activated, so the auto supout was not generated.
If the RB333 hang up again I´ll send you the file, or if you want I can generate the file and send to you.

Many thanks normis.
by interlink
Wed Jan 16, 2008 12:25 pm
Forum: General
Topic: kernel failure on ROS v 3.0
Replies: 3
Views: 1340

kernel failure on ROS v 3.0

Im geting this error frequently. system,error,critical System rebooted because of kernel failure. Is there any possibilty to be related to a hardware failure?. I can´t provide the supout.rif for now. Configuration & hardware. Rb 333 Wlan ubiquiti SR5 Power suply 28v 1A. Ap_bridge --> station wds Nst...
by interlink
Fri Nov 30, 2007 12:57 pm
Forum: General
Topic: Mac Winbox on rc11
Replies: 3
Views: 1421

Re: Mac Winbox on rc11

The same happens to me. The error, can´t load roteros.dll, using mac I get this error, using ip address works fine.
by interlink
Wed Sep 05, 2007 2:52 pm
Forum: General
Topic: RB333 w/RC4 and WDS
Replies: 4
Views: 2003

Re: RB333 w/RC4 and WDS

This would be a good feature, if supported. In our case, we have a bgp session between us and our providers, and a wireless link (rb532/sr5) in the middle, so we can´t do static routing in case of nstreme2, because we lose redundancy, and all the static routes will be impossible to manage. With brid...
by interlink
Tue Aug 21, 2007 2:32 pm
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 34299

Re: CPE-Antenna alignment via customer / Application available?

Me too please.
emiliano<at>cablenet<dot>com<dot>ar

tnx
by interlink
Wed Jul 04, 2007 2:20 pm
Forum: RouterBOARD hardware
Topic: Wireless Interface disappears!
Replies: 4
Views: 1498

Re: Wireless Interface disappears!

I have the same problem but when de pigtail is installed in short circuit at the wlan, so the only way to get the wlan back was resetting to default.
by interlink
Wed Jun 06, 2007 8:27 pm
Forum: Wireless Networking
Topic: Antenna RF shielding
Replies: 4
Views: 1130

Re: Antenna RF shielding

Covering the back side of the sector with a metalic mesh should work fine too. But the separation is the best solution.
by interlink
Fri Mar 09, 2007 2:40 pm
Forum: Wireless Networking
Topic: Compression worsen a link
Replies: 6
Views: 1634

Hi, I have the same issue, with a 22km link usig rb532a, atheros SR5, when I upgrade to version 2.9.40 an compression was enabled the link stay up for 50 seconds top and then disconnects for a few seconds and go up again.
If I uncheck compression option the link stay stable and works find and stable.
by interlink
Wed Jan 31, 2007 1:59 pm
Forum: General
Topic: SNMP
Replies: 54
Views: 28013

So..when the support of new snmp features will be ready to try?
by interlink
Thu Dec 07, 2006 5:54 pm
Forum: Wireless Networking
Topic: Two Rb532a with same MAC??
Replies: 4
Views: 866

check config

I have checked the config and yes, was my mistake, when import the config from another rb the mac was changed.
Thanks for the answers.
by interlink
Thu Dec 07, 2006 5:03 am
Forum: Wireless Networking
Topic: Two Rb532a with same MAC??
Replies: 4
Views: 866

Two Rb532a with same MAC??

I think I have very bad luck, recently we buy two new rb532a and setup a ptp link one of them installed near another rb532a connected on the same switch on the same vlan, wirelessly everything works fine, but when ping the remote extreme we get no answer, after a few hours of investigation we indent...
by interlink
Thu Sep 28, 2006 2:35 pm
Forum: Wireless Networking
Topic: Nstreme dual with RB532. Performance??
Replies: 1
Views: 765

I'm thinking to use a routerboard 532 overclocked at 333mhz, to get better performance. I will post the results soon.
by interlink
Wed Sep 27, 2006 7:04 pm
Forum: Wireless Networking
Topic: Nstreme dual with RB532. Performance??
Replies: 1
Views: 765

Nstreme dual with RB532. Performance??

I'm planning to set up a wireless link with 2 RB532 at a distance of 31km using dual nstreme wtith SR5, and dual polarized antennas transmitting on 5.180-5.320 range and receiving on 5.745-5825 range. Anyone knows what performance could I get, o someone has done this with this configuration. I'll pr...
by interlink
Tue Sep 19, 2006 3:55 pm
Forum: General
Topic: Feature Request: Distance measurement
Replies: 8
Views: 2733

Please support it...
by interlink
Tue Sep 19, 2006 2:36 pm
Forum: Wireless Networking
Topic: SR5 sent deauth
Replies: 10
Views: 1618

The issues comes with no rain, and it´s a sporadic problem, not always happen, the cables are good and connectors too. Maybe it is an interference of another link, when the propagation conditions are excellent. Opinions?

best regards friends.[/img]
by interlink
Fri Sep 15, 2006 6:16 pm
Forum: Wireless Networking
Topic: SR5 sent deauth
Replies: 10
Views: 1618

The frequency is set at 5825 mhz and nstreme is enabled and polling is enabled too.
Any other suggestion will be great...
by interlink
Fri Sep 15, 2006 4:36 pm
Forum: Wireless Networking
Topic: SR5 sent deauth
Replies: 10
Views: 1618

But this not happens all the time, just sometimes when signal fall down, I have scanned the spectrum and nothing appears to be transmitting in this frequency. Can be periodic calibration o some parameters the responsable.
by interlink
Fri Sep 15, 2006 3:46 pm
Forum: Wireless Networking
Topic: SR5 sent deauth
Replies: 10
Views: 1618

This is an extract from the log, I hope it helps. sep/14 22:01:53 wireless,info 00:15:6D:xx:xx:xx@wlan1: disconnected, extensive data loss sep/14 22:01:53 wireless,debug wlan1: removed dynamic WDS link 00:15:6D:xx:xx:xx, name sep/14 22:01:55 wireless,debug wlan1: 00:15:6D:xx:xx:xx attempts to connec...
by interlink
Fri Sep 15, 2006 1:58 pm
Forum: Wireless Networking
Topic: SR5 sent deauth
Replies: 10
Views: 1618

SR5 sent deauth

I have a ptp link at 30 km with 2 rd532+sr5, and two 1.2 m dishes. Configured as ap-bridge and station wds to bridge all the traffic. The average signal of this link is -60 dbm, but when the signal comes to 73 I´ve got this message in log wireless info "wlan1:00:15:6D:xx:xx:xx, sent deauth" and the ...
by interlink
Thu Sep 14, 2006 4:56 pm
Forum: General
Topic: DSL (pppoe) / Cablemodem how to load balance doing NAT
Replies: 2
Views: 1333

Read this, I think it´s wat you need.
http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways
by interlink
Thu Aug 31, 2006 2:41 pm
Forum: Wireless Networking
Topic: Linksys wap11 compatibility
Replies: 1
Views: 786

Linksys wap11 compatibility

Hi, does anyone knows if linksys WAP11 work as a client of a mikrotik AP 2.4ghz?.
Because I can see de AP but can´t get traffic between them.
by interlink
Fri Jul 21, 2006 1:52 pm
Forum: General
Topic: SNMP
Replies: 54
Views: 28013

RF OID

It would be nice to have OID´s for noise floor, Signal to noise and Tx/Rx CCQ.