Community discussions

MikroTik App

Search found 18 matches

by LennonNZ
Fri Sep 05, 2014 11:59 pm
Forum: General
Topic: Routerboard RB2011 Fiber link
Replies: 4
Views: 1423

Re: Routerboard RB2011 Fiber link

What type of SFP's are you using at both ends? Do they show up on the miktotik under the SFP option under the SFP interface?
Are you getting a link ? Send/Receive around the right way?

I've used a large number of different types of SFP's with mikrtik's and they don't seem to be fussy at all.
by LennonNZ
Mon Sep 01, 2014 10:33 am
Forum: General
Topic: Slow PPPoE Client
Replies: 1
Views: 899

Slow PPPoE Client

Hi there. I have a problem exactly the same as: http://forum.mikrotik.com/viewtopic.php?f=13&t=69858 My Set up 1) Mikrotik - Routed network with a /30 over the VLAN it and I can max our 100/50M connection 2) Miktotik - Run PPPoE over the VLAN and I get only about 50M/50M over the PPPoE Connection. 3...
by LennonNZ
Sat Mar 01, 2014 4:29 am
Forum: General
Topic: v6.10 released
Replies: 248
Views: 88447

Re: v6.10 released

I found what route marking didn't work properly after upgrading to V6.10 until I upgraded the Firmware (3.12) as well
by LennonNZ
Fri Nov 22, 2013 3:00 pm
Forum: General
Topic: IPv6 /127
Replies: 18
Views: 5533

Re: IPv6 /127

There have been multiple discussions on the forums on the use of /127s with MikroTik. Its currently not supported, and as far as I remember, no support was promised. /31s for IPv4 are not supported either. Currently /64s should be used for PtP links. Yes /31's not working as most other routers and ...
by LennonNZ
Fri Nov 22, 2013 2:53 pm
Forum: General
Topic: IPv6 /127
Replies: 18
Views: 5533

Re: IPv6 /127

first things first: initially /127 addressing where considered harmful for IPv6. http://tools.ietf.org/html/rfc3627 there are other RFC documents about IPv6 that will state that /127 address space should not be used. now when this is stated, you can use other than the address that ends with 0. for ...
by LennonNZ
Fri Nov 22, 2013 2:47 pm
Forum: General
Topic: IPv6 /127
Replies: 18
Views: 5533

Re: IPv6 /127

first things first: initially /127 addressing where considered harmful for IPv6. http://tools.ietf.org/html/rfc3627 there are other RFC documents about IPv6 that will state that /127 address space should not be used. now when this is stated, you can use other than the address that ends with 0. for ...
by LennonNZ
Fri Nov 22, 2013 7:37 am
Forum: General
Topic: IPv6 /127
Replies: 18
Views: 5533

IPv6 /127

I have a router.. 2 interfaces.. XXXX:f000:32:88::/127 XXXX:f000:32:89::1/127 I can route XXXX:f000:32:90::/127 -> XXXX:f000:32:88:1 fine... _but_ I cannot route XXXX:f000:32:90::/127 -> XXXX:f000:32:89:: it says XXXX:f000:32:89:: unreachable I'm actually trying to send ::/0 to the :0 address and sa...
by LennonNZ
Tue May 14, 2013 11:41 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 33273

Re: v6rc14 released

I don't know if its a BUG on RC14 but I have a RB2011-UAS and I have a 3G USB Stick Attached to it via MicroUSB -> USB Adapter. When I go into PPP Client to set up the Dialer for it I don't get an option for the USB Interface.. only the serial interface. If I go into System/Resources/USB I can see t...
by LennonNZ
Fri Apr 12, 2013 11:55 pm
Forum: General
Topic: RouterOS v6.0rc13 released
Replies: 81
Views: 30024

Re: RouterOS v6.0rc13 released

A couple of days ago I upgrade to rc13 and suddenly on my PS3 I would get disconnected from the PSN network all the time. So I downgraded back to rc12 and the problem has gone away. I have upgraded/downgraded a number of times and each time I go to rc13 the PSN network will disconnect after a short ...
by LennonNZ
Wed Feb 20, 2013 1:26 am
Forum: General
Topic: RouterOS v6rc10 pre-released
Replies: 79
Views: 17615

Re: RouterOS v6rc10 pre-released

I have a RB751U-2HnD running NAT to a PPPoE Connection on v6rc10 After a while (say 5-6 Hours) the web server gets slow and starts to kick me out of the web interface all the time. Then after a day or so the web server is not available at all. There is no excess memory usage. nothing in logs. Winbox...
by LennonNZ
Sun Jul 01, 2012 12:10 pm
Forum: General
Topic: /31 not useable on Mikrotik
Replies: 8
Views: 1858

Re: /31 not useable on Mikrotik

You can do /31 on Mikrotik. Set interface to 10.99.99.1/32 and set broadcast to the remote end e.g. 10.99.99.2 do the opposite on the remote end. It is not clear to me. Can you please give us a config example? Thanks, oreggin Umm.. that is a work around (hack) for Mikrotik -> Mikrotik as far as I k...
by LennonNZ
Sat Jun 30, 2012 4:00 pm
Forum: General
Topic: /31 not useable on Mikrotik
Replies: 8
Views: 1858

/31 not useable on Mikrotik

People where talking about /31's not being useable on Mikrotiks quite a while ago. It is not like they are new in the internet world at all but when I was testing them even on recent software versions /31's would not work. With IPv4 being in short supply these dating using 2 IP Addresses on a PTP li...
by LennonNZ
Sat Jun 16, 2012 3:09 pm
Forum: RouterBOARD hardware
Topic: RB2011L-IN not responding (DOA?)
Replies: 12
Views: 8026

Re: RB2011L-IN not responding (DOA?)

Are you sure you used port 2-10 to connect, not port 1, which is firewalled? Your problem sounds slightly different than in the original post, as bhorrock wasn't able to reset it. I had no Link at all on the FE ports when anything was plugged in to when I got the Router . GE Ports came up but could...
by LennonNZ
Fri Jun 15, 2012 1:40 pm
Forum: RouterBOARD hardware
Topic: RB2011LS-IN + cisco module
Replies: 25
Views: 14244

Re: RB2011LS-IN + cisco module

I also tried a 100M Single Fibre SPF in our RB2011LS-IN and it didn't seem to pass traffic either :-(. I tried changing all the settings and no data passed thru at all. (but link was up)
by LennonNZ
Mon Jun 11, 2012 11:05 am
Forum: RouterBOARD hardware
Topic: RB2011L-IN not responding (DOA?)
Replies: 12
Views: 8026

Re: RB2011L-IN not responding (DOA?)

Looking for suggestions since my new RB2011L-IN is basically non-responsive. An RB751G purchased at the same time works perfectly. I received a 2011L-IN with exactly the same problem as you described. I had to reset it (with the little reset switch) before it started working. Maybe a common problem...
by LennonNZ
Sat Jun 09, 2012 3:02 pm
Forum: General
Topic: IPv6, PPPoE Server, bug?
Replies: 7
Views: 2544

Re: IPv6, PPPoE Server, bug?

I have just experiences the same bug as you. I set it all up.. connected Cisco 887 Router and Assigned PD Network Correctly via PPPoE and I could surf the internet on IPv6 100% . Disconnected Cisco and reconnected and no PD now :-( Running 5.17 on same Hardware. Makes IPv6 via PPPoE useless as it do...
by LennonNZ
Fri Jun 08, 2012 8:54 pm
Forum: General
Topic: Block trace of own interface ip
Replies: 5
Views: 2482

Re: Block trace of own interface ip

/ip firewall filter add chain=input protocol=icmp action=drop Place it at the top of input chain Blocking all ICMP is BAD.. I wouldn't suggest people doing this! Blocking all ICMP will breaks things Devil and is evil much better is: ip firewall filter add chain=input protocol=icmp icmp-options=8:0 ...
by LennonNZ
Wed Jun 06, 2012 1:53 am
Forum: Forwarding Protocols
Topic: OSPFv3 Missing /128 Routes in 5.1
Replies: 73
Views: 20105

Re: OSPFv3 Missing /128 Routes in 5.1

I also have come across this problem (RB1100AHx2 running 5.17) I think. Please can this be fixed in the next version :-) Also the "work around" for cisco.. I don't really like advertising connected routes into OSPF3 (and I don't use cisco anyway) :-) IPv4 OSPF works 100% IPv6 OSPF3 the bridge interf...