Community discussions

MUM Europe 2020

Search found 15 matches

by fusa
Mon Mar 03, 2014 7:22 pm
Forum: General
Topic: v5.X uptime challenge
Replies: 13
Views: 2714

Re: v5.X uptime challenge

I wonder if we fixed the uptime limit issue. Let's see if anyone can get over 500 :)
No, you didn't...

Running 530 days(+) now on ROS 5.19.1 but it only says : 30d 18:15:10
by fusa
Fri Nov 08, 2013 3:53 am
Forum: General
Topic: CRS VLAN tagged / untagged (trunk)
Replies: 7
Views: 15494

Re: CRS VLAN tagged / untagged (trunk)

Thank you, that did the trick. So tagged traffic (trunk) /interface ethernet switch ingress-vlan-translation add port=ether8 customer-vid=400 new-customer-vid=0 and for untagged traffic (access) /interface ethernet switch ingress-vlan-translation add port=ether2 customer-vid=0 new-customer-vid=400
by fusa
Thu Nov 07, 2013 8:19 pm
Forum: General
Topic: CRS VLAN tagged / untagged (trunk)
Replies: 7
Views: 15494

CRS VLAN tagged / untagged (trunk)

Hello, There is not a lot of CRS documentation. I've tried next setup with other managed switches, and this is easy as tagging , untagging.... Also, I don't want this traffic passing the CPU... So Switch mode. http://i.imgur.com/ouLWWOu.png Setup: VLAN 400 = private network - no internet VLAN 0 (def...
by fusa
Wed Apr 24, 2013 11:28 am
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 386
Views: 239342

Re: NOT TO DO. Weird instalations?

A RB installation from a customer (it fits nice into the 1U case):
Image
Image
by fusa
Mon Oct 29, 2012 12:07 pm
Forum: General
Topic: Public ip tunnel
Replies: 3
Views: 546

Re: Public ip tunnel

What exactly is not working? Did you allow PPTP from outside to the router? if not allow tcp port 1723 to the router (input chain).You can use your home rpouter as a clinet and another one as a server because it ha fixed public IP I did create a PPTP server (on the remote RB) with my own profile, i...
by fusa
Mon Oct 29, 2012 11:39 am
Forum: General
Topic: Public ip tunnel
Replies: 3
Views: 546

Public ip tunnel

I've a RB at a remote site with multiple public addresses assigned. Now I want to make a tunnel to this remote site with my home router (also RB) and tunnel a public ip to this router. E.g. Remote site: Public IP's: 123.123.123.2 - 123.123.123.30 RB IP: 123.123.123.2 Home: Public IP: Dynamic! I did ...
by fusa
Wed Jun 13, 2012 8:22 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

So I must give the router an IP of every range and NAT the other IP's.

Instead of using a private IP I will be using the public IP's. So every gateway (clients) must be edited to the IP of the RouterOS-router
by fusa
Wed Jun 13, 2012 7:04 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

Handing off a bunch of /26s via a /30 is pretty basic stuff and is done every day. Can you look for another ISP or find somebody with some sense at your existing vendor?
Not possible, they are the only provider there, still Belgium :(
by fusa
Wed Jun 13, 2012 1:10 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

Did contact them to route everything to one address, this is not possible.

So I must find another way to solve this. I know I will lose some IP's but that is not an issue.

So could you point me the right direction to allow routing between the subnets?

Thank you,
by fusa
Thu Jun 07, 2012 4:24 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

That is along the lines that I was suggesting. By default the routing between the two /26 nets would be via the router and would not touch the ISP. Thank your for your response, as I could see, those are the only things I need to configure for a basic setup. Correct? I know the possibility for the ...
by fusa
Thu Jun 07, 2012 2:18 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

I think the RB must be configured so that it uses one IP of every range to do routing? When they route all IP's to a private /30 range this configuration would be like this (or some more configuration)? ISP IP: 10.9.0.1/30 MY IP: 10.9.0.2/30 PUB IP: 123.123.123.0/26 & 123.123.200.0/26 Interfaces eth...
by fusa
Wed Jun 06, 2012 3:53 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

To avoid wasting too many IPs I suggest that you ask the ISP if they can allocate a /30 to the link and pass traffic for your 4 x /26s to your address on the /30. That would make your life easier! That is not possible, so I need to waste those extra IP's for the router... How should I configure this?
by fusa
Wed Jun 06, 2012 3:28 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

Thank you for your reply,

1) Clients: Public, not NAT
2) 4 x /26 blocks
3) They don't allow to split it further. All those ranges are configured at the ISP (on the same router). So I can use any gateway on this line.

Now all traffic between the ranges go trough the ISP's uplink.
by fusa
Wed Jun 06, 2012 3:00 pm
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Re: Multiple ip ranges

That is correct, I've created a bridge, this is not correct.

It should be in routing, but how should I configure this to work with multiple IP ranges
by fusa
Wed Jun 06, 2012 5:21 am
Forum: Beginner Basics
Topic: Multiple ip ranges
Replies: 16
Views: 3003

Multiple ip ranges

Hello, (RB1100AH) I've multiple ip ranges (other subnets) assigned to one interface over one 100Mbit pipe. I did put everything into one bridge and added some firewall rules. But now I've noticed: when I send from the one IP-range to the other IP-range data, this traffic doesn't get routed by the Mi...