MikroTik

sb1mpo

Hi, I have around 2000 Routerboards running hotspots, from 411's to CCR and x86 servers. Working out what device/s you need to think of other important factors such as bandwidth, firewall rules etc. For example you might have a 951U with 200 hotspot users with a WAN bandwidth 20Mb/s and no firewall ...

sb1mpo

Hi,

Does anyone know the command so I can send user commands to a PCI modem?

Thanks

sb1mpo

Hi, The first image shows you your HOST table, this is associated users that are NOT authenticated. The second image shows you your ACTIVE table, this shows authenticated users. So you have 6 people connected to your system but only 2 are logged in and using the system. I recommend you go on the MTC...

sb1mpo

Thanks for the suggestion. BAD AT OK ATI Manufacturer: Sierra Wireless, Inc. Model: MC8780 Revision: F1_0_0_10AP C:/WS/FW/F1_0_0_10AP/MSM7200R3/SRC/AMSS 2007/11/08 10:51:15 IMEI: 3542****** IMEI SV: 7 FSN: D3310******** 3GPP Release 6 +GCAP: +CGSM,+DS,+ES Manufacturer: Sierra Wireless, Inc. Model: M...

sb1mpo

Hi Guys, I have built 50 3G units from: Mobo: RB411U's 3G: Sierra MC8780 Wi-Fi Radio: R52nM 42 of them seem to work fine, the other 8 do not. The other 8 are configured exactly the same as the working units. I have tried different SIMs from different providers with the same results. All the SIMs wor...

sb1mpo

Thanks but I'm not really here to argue about VLANs or IEEE standards. 1.) I'm just trying to get the point across that I don't want to set up all VLANs on the port (Tagged), I just want the port to accept all VLAN IDs (Trunk), but not to route between them I have been using bridge horizons. The app...

sb1mpo

By "true trunk" I mean it will forward all tagged frames, some people describe tag ports as trunk ports. So basically if you set up 2 VLANs 20,10 on a switch port and turn trunking off, this is a tagged port and member of VLAN 10 and 20. A trunk port is a port that will forward any frame t...

sb1mpo

Hi, Thanks. But its basically the end of the network so its a Routerboard running a hotspot. So I need it to accept any VLAN tag then send it back out on the same VLAN. I have set my portal system to display a different portal depending on what VLAN the subscriber comes through on. Its a pain adding...

sb1mpo

Hi All, Does anyone know how to set up a true trunk port? By that I mean it will accept all tagged traffic without adding the VLAN to the router and won't route all the different VLANs, so they cannot see each other. Basically I want to be able to set a port on Routerboard so that it can be plugged ...

sb1mpo

I would agree if you changed the product description "SXT is a low cost, high speed 2GHz outdoor wireless device".

Maybe add: its not waterproof so its not really suitable for outdoor.

sb1mpo

I totally agree with you TheWiFiGuy!

It should be a sealed unit with a CAT5 gland built into the unit similar to the Ubiquiti Bullet Titanium.

sb1mpo

The wind tunnel looks much better... but I think the door could do with improving as well.

sb1mpo

Is this new design available now? Have you made any changes to the door design?

sb1mpo

Hi Normis,

Thanks for the fast response, this design looks much better!

I have got some of the original design SXT's in stock can I send these back to my distributor and get them replaced with the newer designed ones?

Regards,

sb1mpo

sb1mpo

Hi, I have mounted the SXT's according to documentations and I have also made sure the door has closed correctly. 1/2 of the SXT's I have installed at this site I have put silicon around the door edges. I have units from each failing.... Take a look at the pictures as you can tell the water hasn't g...

sb1mpo

Hi Guys,

I want to send automatic RADIUS requests from ROS so I can run tests. Does anyone know a way of doing this?

For example to simulate a user logging into the hotspot

sb1mpo

Hi,

I wouldn't recommend 50k users on one hotspot.

You would be better having multiple servers then adding the users to the same RADIUS group. If you need to roam between hotspots use MAC auth.

I would say 20k MAX hotspot...

50k maybe possible but may not be wise

sb1mpo

Thanks it worked!

sb1mpo

Hi, Could you not have 2 RADIUS entries one of a Nomadix (field_A) and one for Mikrotik (field_B) Then do something like.... if gateway = Nomadix then NAS = (field_A) if gateway = Mikrotik then NAS = (field_B) That way if you added anymore gateways you could just add another field

sb1mpo

I would have thought that would be easily enough!

sb1mpo

Hi, I have been using a 411U with a Sierra MC8780 the 3G works great! However I'm unable to get the GPS to work as well. I have spoken to MikroTik they cannot get GPS to work with this card either. Can anyone recommend which card I should use so I can get both working? I cannot use USB it must be PC...

sb1mpo

Redirect DNS onto itself using firewall and then add a static DNS entry

sb1mpo

Hi Guys, I was hoping someone could help me with a problem I have I have set up a 411U with Sierra PCI modem + R52 Radio card - It works fine I have 2 SIM card providers both use different APNs, but i need to be able to swap SIMs without reconfiguring the APN settings. Does anyone know how a can ach...

sb1mpo

My Wish List: 1. An internal AP with "beamflex" Ruckus style antenna. Either 802.3af compliant or Mikrotik make a bigger PoE switch. Also this AP must blend in well with its environment such is this Zyxel or the Ubti internal APs. http://www.zyxel.com/uk/en/products_services/nwa1120_series...

sb1mpo

Hi,

Try turning auto-negotiate off and then set the link speeds manually, if the manual link speeds you have set still fail then try a different speed + duplex.

I have seen this a few times with other vendors...

Hope this helps

sb1mpo

Yes which is why it would be good to see them being made with Solid Capicitors instead of liquid. The compact size of the 450 is what I need 2011 is too big and don't need all the ports.......but every ones needs are different I would of thought the 450 is one of the best selling units...so others w...

sb1mpo

Hi Guys,

Dobby - Yes I agree it would be good to have a cheaper dual core product..

Thanks for your replies its good to know I'm not the only one wanting this product update.

Lets hope MikroTik will reply with an answer...

sb1mpo

Hi MikroTik You have updated and brought a lot of new products out which is great. (951G) Are you planning to update the long serving 450G? With a new gen CPU, more memory and maybe solid capacitors? (Maybe 800MHz with 512Mb ram to sit between 915, 2011 and the RB1200?) I think it would be great if ...

sb1mpo

Hi, The client is possibly running something like VMWare Workstation. where a single machine has a single NIC and is bridging his VM's with the NIC on the host, they could have given each VM a static IP which is what you are seeing? The hotspot uses Dynamic Address translation, so even is the client...

sb1mpo

Hi, Have you tried binding the ip addess/ range that you wish to ping? To do so go ip binding tab on hotspot and type in range such as 192.168.1.1-192.168.1.20 or a single ip then under type select bypassed. You should then be able to ping the addresses. Or create a firewall rule to allow access to ...

sb1mpo

We use the Ruckus faceplate AP's. Brilliant bits of kit. Surely Mikrotik can make a product like this based on the 751/951 platform. It just needs an internal ether1/PoE jack, or some other way to route a cable around to the front of the board, and a backing plate that fastens to a standard wall pl...

sb1mpo

v5.17 still the same. v5.18rc1 fixed

sb1mpo

Hi,

I had the same problem there is a broadcast storm issue with v5.17. v5.18 will fix the problem ask Mikrotik if you can have a pre-release.

If not downgrade to v4.17

sb1mpo

I have the same problem this happens with both ethernet and wireless connection, but it seems to happen alot more with wireless than the ethernet. I'm using Omnitik SXTs back haul with 433s as client access points and a 750 for the gateway. Bridge has rstp running WDS is dynamic Reboots fix the prob...

Search found 34 matches

Re: 20 000 hotspot users

PCI Modem user commands

Re: Please i think my Roter hack

Re: RB411U + Sierra MC8780 intermittent 3G connection

RB411U + Sierra MC8780 intermittent 3G connection

Re: VLAN Trunk Port

Re: VLAN Trunk Port

Re: VLAN Trunk Port

VLAN Trunk Port

Re: Water Sxt

Re: Water Sxt

Re: Water Sxt

Re: Water Sxt

Re: Water Sxt

Re: Water Sxt

Automatically send RADIUS request

Re: Hotspot Scale...

Re: 3G APN Settings

Re: Mikrotik and Radius - Nas-Port / Nas-Port-ID

Re: Hotspot Scale...

3G and GPS

Re: [HOTSPOT] Check gateway

3G APN Settings

Re: Routerboard Hardware wish list

Re: RB751G-2HnD switch ports down and up

Re: 450G update CPU+RAM+Solid Capicitors

Re: 450G update CPU+RAM+Solid Capicitors

450G update CPU+RAM+Solid Capicitors

Re: Hotspot Issues - Seeing Multiple Requests Per Mac Addres

Re: NETWORK BEHIND HOTSPOT CLIENT

Re: Wall Jack APs

Re: RouterOS V5.16 is given problem to the RB433AH...

Re: Hotspot bypass problems

Re: RouterOS V5.16 is given problem to the RB433AH...