MikroTik

easyspot

But now they are aspiring to be in the range of Enterprise hardware/software vendors, so such topics must receive top priority. Unfortunately they are just aspiring to get into the enterprise sector. They don't actually try to. I can't imagine any big enterprise that can wait for over 6 years for f...

easyspot

When they create CCR n CRS, that time they aim for enterprise router. But guess what? There are alot of CCR n CRS problem caused by software. After sometime, they can make a good software for CCR n CRS, but the next update will be unstable again. I was working with CCR n CRS for a big factory. I ord...

easyspot

That's why Mikrotik must stop prevent users downgrading ROS version! Do they prevent? (O_o) Yes they prevent. I was working alot with RB951UI-2HnD with the most stable ROS 6.32.4. After some times, MT put factory version. Since that time, RB951UI-2HnD that I bought with factory version post 6.32.4 ...

easyspot

Mikrotik have to choose between being enterprise os which is offering stability, or soho os which is offering alot of features but unstable. Mikrotik always, I mean always, sell new hardware before make the software for it. Everytime we buy new hardware, we must wait for about 6 months before that h...

easyspot

Long time ago, Long Term / Bugfix channel really good for mission critical system, because its already stable n tested. But now LT channel is just a name. In fact, the only latest real stable LT is 6.43.16. So why MT create LT n Stable channel if both unstable just like Testing channel?

easyspot

Tab button not working is annoying but the most annoying is we must input tx speed. This is bandwidth test, to measure maximum speed we can get. Isnt it silly if we must input tx speed?

easyspot

This version shows up as "testing" in IP neighbor instead of stable. Both in winbox and CLI.

Screenshot from 2020-05-09 22-29-24.png

Because they really know if this release not really stable lol

easyspot

Upgraded from 6.46.5 to 6.46.6 n so far I didnt see any better. Maybe need to wait for 6.46.7 for stability. Did it get worse than 6.46.5? Do you have problems with 6.46.5? All fixes are not for all, so it may be that there are changes that makes it better for others. Some of my routers are HAP AC2...

easyspot

Upgraded from 6.46.5 to 6.46.6 n so far I didnt see any better. Maybe need to wait for 6.46.7 for stability.

easyspot

Here the diagram I need to do: All LAN DNS Request => Mikrotik DNS Server => DST-NAT to port 5353 => WAN What I tried to do: 1. If I put DST-NAT in firewall, all DNS Request bypassed directly to WAN port 5353. Mikrotik DNS Server not doing anything. 2. If I disable that firewall line, all DNS Reques...

easyspot

hardware: HAP AC Lite software: 6.44.6 firmware: 6.44.6 services: pptp server, sstp server, dhcp server, dns server, masquerade, dual wifi both on. problem 1: when multiple (about 5) sstp clients connecting together at once, cpu load goes 100% then wifi rto for 15-20 seconds, then back to normal. pr...

easyspot

Woah u really live in the future. We all here still at 6.44.6 n u already at 6.44.7 lol.
Upgraded all devices here n all stable.
ARM based wifi ac got stability improvement.
SMIPS upgrade easily if only install 11 packages instead of 13. Kickin tr069 n hotspot package.

easyspot

https://mikrotik.com/product/RBSXTG-2HnDr2-168 wrote that SXT2 max power consumption is 11w, but delivered with 24v 0.38A (9w) power supply? Is this a joke? Or max power consumption written in website is wrong?

easyspot

U wanna match firmware version with ros version is ok, u wanna make it auto upgrade is cool, just add a little tiny feature: auto reboot after firmware upgrade. So when we do package update, rebooting, firmware auto upgrade, auto reboot, then all done.

easyspot

I managed over 400 routerboards, almost all architecture, so how do I know if this or that routerboard got no firmware changes? U want me to watch every routerboard tiny firmware notification during update?

easyspot

How do we know if there is no firmware change, since it changed from 6.42.11 to 6.42.12, and auto upgrade setting really did firmware upgrade?

easyspot

Why dont u make auto reboot after firmware upgrade???? Every new update also update firmware, and u put an option to auto upgrade firmware. But why do we have to reboot manually???

easyspot

Many our clients still use old hw with old ros so cant use romon. Anyway its way easier to add winbox button at neighbor list n is really useful.

easyspot

why dont have WinBox + MAC WinBox button?
That's probably because WinBox has neighbor discovery capability builtin.

WinBox discovery not working on VPN. The only way is thru IP>neighbor list.

easyspot

Can please add WinBox + MAC WinBox button in Neighbour List? Currently there are Ping, MAC Ping, Telnet, MAC Telnet, Torch, why dont have WinBox + MAC WinBox button? I have to copy address/MAC then paste in new WinBox window to access them

easyspot

Since long time ago i always use reset config n autorun file.rsc configurations. Its always working normally until 6.37.5. I skip 6.38.x. I got the problem in 6.39.3 n 6.40.6. Havent test 6.40.7 yet. The problem is: only few first lines applied. The rest lines below skipped. This problem very annoyi...

easyspot

Since long time ago i always use reset config n autorun file.rsc configurations. Its always working normally until 6.37.5. I skip 6.38.x. I got the problem in 6.39.3 n 6.40.6. Havent test 6.40.7 yet. The problem is: only few first lines applied. The rest lines below skipped. This problem very annoyi...

easyspot

how to set hap lite as wireless client with wps support? which button (reset or mode) act as wps button? can share script? thanks.

easyspot

What is max HDD capacity supported by RB1100AHx4 Dude Edition? Is it 2TB or can go over 2TB? If can, can go over 2TB in single partition? Can use NTFS so readable by windows? Feature request: Web server. Mikrotik already have web server for its login, hotspot, n user manager. Why not available to us...

easyspot

It's a very cool mt hw but where is hw block diagram? We need to know how many shared ports, can use 2x M2 + SATA together or must choose either M2 or SATA, etc.

easyspot

installed 6.37.5 to hap lite, update routerboot, playing around, decided to go back to older version but netinstall can't recognize. enter winbox > routerboard > setting > ethernet boot once then nand, netinstall not responding. press reset then powering for 15s doing nothing too. last thing i uploa...

easyspot

I set IP cloud force update every 5 mins to update ddns n time. Ddns is fine, but time update going crazy.
Over 80 routerboards (smips mipsbe tile) running on 6.32.4 - 6.37.4 - 6.38.1 affected.
I put log screenshot in attachment.

easyspot

GrooveA-52HPn:
Wifi working but scan, freq usage, align, snooper not working. Downgrade to 6.32.4 all working.
Solved: need to press start lol

easyspot

Demo is already 6.36.2 while in downloads still 6.36.

easyspot

NAND Flash way faster than SPI Flash. Not believe what I'm saying? Try netinstall RB951Ui vs RB952Ui. RB951Ui using 128MB NAND netinstall so fast, while RB952Ui using 16MB SPI netinstall so damn slow. Netinstall issue? Not really. Try this to confirm: winbox > terminal > export verbose file=test. U ...

easyspot

Adding port to bridge disconnect winbox with mac login. Not happened in ROS 6.32.4 n below. Example: after reset configuration with no-default, connect winbox using mac address at ether1, open terminal, paste: interface bridge add name=bridge1 interface bridge port add bridge=bridge1 interface=ether...

easyspot

It's actually not about flash price problem. But because of many peoples use cheap hardware to do advanced task like metarouter, MT think: how to sell expensive hardware to get more money? Errr... Lets say, if we decrease flash size just for basic task, then if you want to use advanced task then go ...

easyspot

Just bought couples of SXT Lite2 n got r3 version which using SPI flash 16MB instead of NAND 128MB on older model at the SAME PRICE AS BEFORE!! The funny is, there is NO INFO AT ALL about new version until we bought it. Why? Trying to fool buyer? U guys might said its a new version. But selling it w...

easyspot

I'm running various ros version at hap lite and all of them report web proxy as unknown. It's enabled, redirected, working, status is fine, but no caching at all (cache contents empty).
Question: is only hap lite affected or any other model too? Is it a bug?

easyspot

Last time using 6.35rc, ended with link dead for 1 day. Must do netinstall on both side. Now using 6.32.4 to keep out of trouble. No more rc version for me

easyspot

Sometimes escape key wont close windows. But after opening another window, escape key working again. Example: I'm opening ip firewall window. After I done, pressing escape key wont close ip firewall window. Then I open queue window, press escape key, queue window closed, press escape key again, ip f...

easyspot

Agree with WirelessRudy Will u guys bring notebook PC with 15.6" FHD 1920*1080px to roof/tower? How big? How heavy? How long the battery will last? Dont u guys think its silly? :lol: We all go to roof/tower using cheap netbook PC so in case of accident, we wont lose so much money. Netbook PC al...

easyspot

Winbox V3 problem including V3.3: Look at the picture, at my screen size 1280x800px, in Wireless - Advanced Mode window size too long. How about smaller screen pixel size such as notebook PC 1366x768 or netbook PC 1024x600? How can we set? Imagine if all buttons and info located at title bar (such a...

easyspot

Version 6.35rc14 has been released.
What happened with rc13?

Mikrotik crew believe in fengshui that said number 13 is bad so that's why they skip rc13 lol

easyspot

I think its better to have bucket-size value in kb, just like in squid delay pool.

easyspot

Ideally, configuration default should be just IP on ether1, then provide Wizards (Quick Sets) for newbie.

easyspot

Hardware: RB951Ui-2HnD Problem: Web Proxy with External Storage Tried using USB Flash Disk and USB External HDD, result the same. After formatting, select cache path, tick cache on disk, enable, Apply, message below written building cache. After message turns Running, enable transparent proxy, these...

easyspot

RB951Ui-2HnD:
Can't do web proxy to external disk. Tried USB Flashdisk and USB HDD External, same result. After building cache, running, can't open anything. Few files entered USB disk but can't clear cache.
If untick Cache to Disk, everything works normally.

easyspot

There's some options I don't understand from wiki: > max-client-connections (integer: 1..5000; Default: 600) > Maximal number of connections accepted from clients (any further connections will be rejected) 600 value is sum for all clients? If I have 1000 users behind proxy, then only 600 users will ...

easyspot

I saw MT trying to make beginner can use MT easily by adding Factory Pre-Config, Quick Set, DHCP Server Wizard, Hotspot Wizard. Why there is no WAN Load Balancing Wizard for masqueraded network? Try search for questions about Load Balancing Setup n you'll know how many peoples (mostly beginner) need...

easyspot

I have problem with WDS Repeater described in the picture. Anyone can help?

easyspot

I saw Tile-GX 8036 Data Sheet and it's possible to build CCR with 4x10GB Fiber (connect to Network I/O) + 16x1GB Ethernet (connect to 16 lanes PCIe).
Will MT make it happen?
It will be great to have 40Gbps fiber channel together with 16Gbps ethernet

easyspot

I have running centralized User Manager V5.26, and all my current routers also running V5.26. Now I need to connect CCR to my User Manager. CCR can't run V5, and Centralized User Manager must run 24/7 without downtime so User Manager can't go V6. Question is, can I connect CCR V6.32.3 to User Manage...

easyspot

I'd like to buy this router but notice 1 thing. According to block diagram, it should be: SFP = 1gbps line SFP+ = 10gbps line Eth1-4 = 1gbps switched line Eth5 = 1gbps line Eth6 = 1gbps line Eth7 = 1gbps line Eth8 = 1gbps line Total: 16gbps line Why performance test result capped to 12gbps? Any invi...

easyspot

I'm ROS user since v2.9 and I've been long time with v5 but now I had to move to v6 because I need to use CCR and CRS. After moving to ros v6 I've notice something really annoying: At older ros, after do netinstall, we do login, there's a window saying about initial setup n we can press delete defau...

easyspot

System: RB450G - RouterOS 5.26 ether1: WAN 192.168.0.2/24 - GW 192.168.0.1 (ADSL Modem) ether2: LAN 192.168.1.1/24 - DNS 192.168.1.1 Masq: ip firewall nat add action=masquerade chain=srcnat disabled=no out-interface=ether1 Internal DNS Cache: ip dns set allow-remote-requests=yes cache-max-ttl=1h cac...

easyspot

NAS === MT X86 5.26 === WIFI ~~~ NOTEBOOK (Download from NAS got 45mbps stable) NAS === MT X86 5.26 === WIRED TO NOTEBOOK (Download from NAS got 986mbps stable) NAS === RB450G 5.26 === WIFI ~~~ NOTEBOOK (Download from NAS got 30mbps stable) NAS === RB450G 5.26 === WIRED TO NOTEBOOK (Download from NA...

easyspot

I'm using 2x TP-Link TG-3468 PCIe Gigabit (RTL8168). Works like a charm. Just remember, RTL8111/8168 (PCIe) shares the same driver with RTL8169 (PCI)!! So never ever use both in a system!!

easyspot

I want all devices at LAN connecting to internal ROS DNS Server at port 53, then ROS DNS Server communicate to WAN using another specified port. Can ROS do that?

This system is so damn easy to do with centos. Just modify dnsmasq config file. But there's no settings in ROS.

easyspot

Here's my setting: Router OS = V5.26 ether1 = WAN ether2 = LAN (masqueraded) DNS Server = Static to 208.67.222.222 Web Proxy = Enabled (dst-nat port 80 redirect to port 8080) The problem is: my isp block port 53, so I cant get any access. Is there any way to set custom DNS Server Port? Port forwardi...

easyspot

There's a problem with ROS 5.26 Web Proxy "Cache On Disk". Cache On Disk OFF = cache to ram working properly. Cache On Disk ON = not working. The funny thing is, with ROS 5.25 Web Proxy working properly. Cache On Disk OFF = cache to ram working properly. Cache On Disk ON = cache to disk wo...

easyspot

Thank's for info. Then I'll go for RB450G

easyspot

My customer need router for hotspot, need gigabit speed, 24/7 operation, ROS 5.26, budget up to USD150. Which is better between RB450G or RB2011UiAS-2HnD-IN? I'm not talking about features or specs, but stability. He need stable system for mountain top installation (cant do reset if router freeze), ...

easyspot

Thanks for the information. I'll try it at my next maintenance

easyspot

Hi I'm running RB1200 and I'd like to do like this: Port 1: WAN DHCP Client Port 2-10: Hotspot LAN (all bridged) to Port 1 The rules are: Port 2 can talk to port 1, but can't talk to port 3 4 5 6 7 8 9 10 Port 3 can talk to port 1, but can't talk to port 2 4 5 6 7 8 9 10 Port 4 can talk to port 1, b...

easyspot

If mikrotik not responsible for metal issues, I won't use any mikrotik hardware anymore. Enough problems with RB450G, RB2011, RB1000, and now Metal!

easyspot

Well here's the latest update: uptime: 3w2d14h34m56s version: 5.26 free-memory: 1888372KiB total-memory: 1943372KiB cpu: AMD cpu-count: 2 cpu-frequency: 2794MHz cpu-load: 0% free-hdd-space: 3726292KiB total-hdd-space: 3850320KiB write-sect-since-reboot: 23783512 write-sect-total: 23783512 architectu...

easyspot

thanks for the script and it works

easyspot

Well my PicoStation came with 5db rubber duck antenna, and my WA5110 came with 5db rubber duck antenna too. WA7210N tried using external antenna from WA5110. So all about the same situation. The problem is, why toy wifi can do much better throughput compare to metal? If metal worse than toy, then wh...

easyspot

I just bought 6pcs brand new metals 2shpn all bundled with 6db omni antenna (known as latest release). All stocked with 5.26 lv 4 and firmware 3.10 (upgraded to 3.12). I tried to do bandwidth test: Mikrotik Server (AMD Phenom II x4) > Mikrotik Metal 2shpn > Laptop (Atheros AR9287 mPCIe bgn 2x2 MIMO)...

easyspot

Here's the report: uptime: 13h35m56s version: 5.26 free-memory: 1894076KiB total-memory: 1943372KiB cpu: AMD cpu-count: 2 cpu-frequency: 2793MHz cpu-load: 0% free-hdd-space: 3729784KiB total-hdd-space: 3850320KiB write-sect-since-reboot: 548408 write-sect-total: 548408 architecture-name: x86 board-n...

easyspot

Hi... This maybe a noob question but I need a hotspot on login script that will count how many logged in users, and every 1000 logged in users, login page image change according to my image list. And I need to keep counter in disk so when I need maintenance, the value remain after reboot. I'm using ...

easyspot

Try this for whoever got lockup issues
http://www.mikrotik.com/download/share/ ... .25rc1.zip

easyspot

Hi I'm new in mikrotik and I really need a topology like this: Router RB450G ether1: 192.168.0.2/30 (GW 192.168.0.1) ether2-5: 172.16.0.0/16 (hotspot with user authentication) Example if I have Anynomous User which is NOT LOGIN at ether2, will it be able to connect to Anynomous User which is NOT LOG...

Search found 69 matches