Community discussions

MikroTik App

Search found 36 matches

by xtrgeo
Mon Jul 08, 2019 7:49 pm
Forum: Beginner Basics
Topic: Clinets gets DHCP leases from another DHCP
Replies: 4
Views: 617

Re: Clinets gets DHCP leases from another DHCP

Here is the HEX config /ip pool add name=dhcp_pool0 ranges=192.168.110.2-192.168.110.254 /ip dhcp-server add address-pool=dhcp_pool0 disabled=no interface=ether2 lease-time=3h name=dhcp1 /interface detect-internet set detect-interface-list=all /ip address add address=10.5.10.2/29 interface=ether1 ne...
by xtrgeo
Mon Jul 08, 2019 4:00 pm
Forum: Beginner Basics
Topic: Clinets gets DHCP leases from another DHCP
Replies: 4
Views: 617

Re: Clinets gets DHCP leases from another DHCP

I'll post the config later but why do I need to use vlan's? My Lan's are completely isolated from each other, since I use different Lan for the interrconnection of the routers and different Lan's (and ports of course) for the clients Lan's. Besides this is one of the principal job of a router: to di...
by xtrgeo
Mon Jul 08, 2019 2:31 pm
Forum: Beginner Basics
Topic: Clinets gets DHCP leases from another DHCP
Replies: 4
Views: 617

Clinets gets DHCP leases from another DHCP

Hello, I have a simple network as in the picture I attach. My issue is that some clients on RB2011(on bridge interface) gets ip from the dhcp server that runs on the HEX and vice versa! As you can see on the diagram those two routers are connected directly (port10 rb2011 <--> port3 hex) and the 2 dc...
by xtrgeo
Mon Feb 20, 2017 2:05 pm
Forum: General
Topic: Limit both: Each Ip and at the same time the whole subnet
Replies: 3
Views: 433

Re: Limit both: Each Ip and at the same time the whole subnet

Hi and thnks for the reply.

In fact I did what you said just before I saw your post. Further details is that I've putted the default queue above the pcq-download-default.
Also the default queue has the option that it has as parent the pcq queue. Is that correct or is it useless?
by xtrgeo
Sat Feb 18, 2017 11:44 am
Forum: General
Topic: Limit both: Each Ip and at the same time the whole subnet
Replies: 3
Views: 433

Limit both: Each Ip and at the same time the whole subnet

Hi all, Interface 1 is my wan Interface 2 is my first Lan 192.168.10.0/24 Interface 3 is my second Lan 192.168.20.0/24 I want to limit the whole first Lan subnet to get 10M for download and 1M for upload,but in the same time,EACH ip of this subnet to be able to get maximum download 3M and maximum up...
by xtrgeo
Wed Jan 18, 2017 4:42 pm
Forum: General
Topic: OpenVPN do not require username/passwords
Replies: 2
Views: 1195

Re: OpenVPN do not require username/passwords

Thnks for the reply.

Just to make sure I understand correctly reading the manual:

Authentication without username/password is not possible for ANY type of client OR just wben client is a mikrotik router?
by xtrgeo
Wed Jan 18, 2017 2:19 pm
Forum: General
Topic: OpenVPN do not require username/passwords
Replies: 2
Views: 1195

OpenVPN do not require username/passwords

Hi all, we decided to turn our OpenVPN server from a windows machine to one of our mikortik router. The implementation was much more difficult from the windows machine, I have to say! Anyway, the only clients we cannot connect anymore are our Grandstream IP Phones. can you please help me how to turn...
by xtrgeo
Sat Nov 19, 2016 5:35 pm
Forum: Beginner Basics
Topic: InterVlan routing on different ports
Replies: 1
Views: 450

InterVlan routing on different ports

Hi all, My configuration: Cisco SG200-26 PORT 1,2,3 TRUNK,CAN CARRY ALL VLANS,TAGGED All other ports are access ports on VLAN 10,20,30,40 RB450G PORT 2 HAS VLAN 10, PORT 3 has VLAN 20 PORT 4 has VLAN 30,40 so basically all 3 ports are trunk ports.No bridges. Ethernet cables connects PORT 1 of Cisco,...
by xtrgeo
Mon Dec 28, 2015 6:13 pm
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Re: Queue simple not working...

Hello,

no there is no solution yet.Still. using 6.20

If someone has any update on that,please notify!
by xtrgeo
Fri Sep 25, 2015 12:15 pm
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Re: Queue simple not working...

Very strange...

I think MT programmers should have a look on that.

With the same EXACT configuration simple queue is working on 6.20, but it's NOT working at 6.30.x....
by xtrgeo
Tue Sep 22, 2015 8:44 am
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Re: Queue simple not working...

Could you please show us the way through parent queues?

Thnks
by xtrgeo
Mon Sep 21, 2015 11:16 am
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Re: Queue simple not working...

ok!
by xtrgeo
Mon Sep 21, 2015 11:00 am
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Re: Queue simple not working...

I've started with default conf and only the queue, after arranging the necessary IP's to the interfaces,dhcp server and default gateway.Nothing else! I am attaching the export here. Maybe you see something I cannot see! Thnks [admin@MikroTik] > export # sep/21/2015 10:55:05 by RouterOS 6.32.1 # soft...
by xtrgeo
Mon Sep 21, 2015 9:50 am
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Re: Queue simple not working...

This probably will help you.. http://i.imgur.com/Njm1PMM.png?1 Create a new simply queue, as my picture bellow.. In interface you can select interface (as my scenario) or enter your guest network pool 192.168.6.0/24. That will limit 5M DL and 5M UL for all your clients that is connected to guest wi...
by xtrgeo
Sat Sep 19, 2015 10:05 am
Forum: Beginner Basics
Topic: Queue simple not working...
Replies: 14
Views: 2668

Queue simple not working...

Hi, I've set up my rb2011 with ether-1 as gateway interface,leeds to isp wlan1 is for my wireless laptops,set it up as seperate network (192.168.5.0/24) I've created a virtual AP(wlan2) for my guests,gave it seperate network (192.168.6.0/24). DHCP and etc works fine,everyone can get to the internet....
by xtrgeo
Thu Jul 25, 2013 3:08 pm
Forum: General
Topic: Queue for limiting bandwidth
Replies: 2
Views: 578

Queue for limiting bandwidth

Hi all, after reading wiki,forum,google research and so on, I can not figure out how to limit the bandwidth. 1. If i have a LAN with 10 clients,how can i limit so everyone of them gets,at the same time, maximun 100kbyte/s? So, if everyone is downloading something huge, the maximum throughput of the ...
by xtrgeo
Thu Jun 27, 2013 6:43 pm
Forum: General
Topic: Low disk space
Replies: 5
Views: 963

Re: Low disk space

How should I use netinstall if the router is away from me,It's behind of isp's modem-router and I have no access to a pc inside the 493AH lan,as these are guests laptop,tablets,etc?????
by xtrgeo
Thu Jun 27, 2013 3:04 pm
Forum: General
Topic: Low disk space
Replies: 5
Views: 963

Re: Low disk space

Nothing. It's totally empty...
by xtrgeo
Tue Jun 25, 2013 1:46 pm
Forum: General
Topic: Low disk space
Replies: 5
Views: 963

Low disk space

Hello, In one of my RB493 i see that my free disk space(64MB) is quit low. I do attach here the files and packages information. What is using my free space? I n the logs i only see 100 lines and i have no proxy enabled.
by xtrgeo
Thu Jun 06, 2013 10:10 am
Forum: General
Topic: Exclude specific site from going through proxy
Replies: 1
Views: 582

Exclude specific site from going through proxy

Hi all, web proxy is enabled in mikrotik rb450g. Not transparent, so every client has the proxy address in it's browser. I use a parent proxy. Parent proxy blocks some specific urls. For these websites, I have configured a static route in mikrotik, in order to use another gateway and not my default ...
by xtrgeo
Thu Jun 06, 2013 10:03 am
Forum: General
Topic: Use Proxy only for access control,not cache
Replies: 2
Views: 736

Re: Use Proxy only for access control,not cache

Thnk u for that. The response time got a little better, but it still has some delay...maybe mikrotik's proxy cannot handle so many users at the same time or it's me having something wrong in my conf...
by xtrgeo
Mon Jun 03, 2013 2:49 pm
Forum: General
Topic: Use Proxy only for access control,not cache
Replies: 2
Views: 736

Use Proxy only for access control,not cache

Hi, is it possible to use the proxy only for access control and NOT for caching? Why i want to do that? I have a 2GB memory card on my RB450G and have it all available for cache. Cache contents has almost 4500 items.Connections are almost 250 and I also use a parent proxy. Do u think I have somethin...
by xtrgeo
Mon Jun 03, 2013 2:36 pm
Forum: General
Topic: Problem in PCC traffic balance
Replies: 6
Views: 1417

Re: Problem in PCC traffic balance

Seems like th PCC works fine now...Thnks for the help!
by xtrgeo
Wed May 29, 2013 11:51 pm
Forum: General
Topic: Problem in PCC traffic balance
Replies: 6
Views: 1417

Re: Problem in PCC traffic balance

Are you running a hotspot or proxy or anything like that? Those mess with PCC a fair amount and you need to modify the configuration to take into account the new packet flow through the router. Also "both addresses and ports" works well, but does have problems associated with it. It can break forum...
by xtrgeo
Wed May 29, 2013 11:49 am
Forum: General
Topic: Problem in PCC traffic balance
Replies: 6
Views: 1417

Re: Problem in PCC traffic balance

Thnk u for the reply! I am attaching a link to a video to see the same again. By the time the video was produced, there were over 100 users behind the router, so at least the multiple devices and locations options, are quite high... http://www.youtube.com/watch?v=qCZ4utwFjfI You are right about the ...
by xtrgeo
Tue May 28, 2013 10:53 pm
Forum: General
Topic: Problem in PCC traffic balance
Replies: 6
Views: 1417

Re: Problem in PCC traffic balance

Any hint on this?
by xtrgeo
Tue May 28, 2013 3:39 pm
Forum: General
Topic: Problem in PCC traffic balance
Replies: 6
Views: 1417

Problem in PCC traffic balance

Hello all, I've set up a PCC traffic balance according to the mikrotik wiki article on pcc. I am attaching two pictures. In picture interfaces.png you can see that traffic balancing is not actually working, as one gateway has a load of 2Mbps and the other some Kbps, usually no more than 50-100. In t...
by xtrgeo
Wed May 22, 2013 2:55 pm
Forum: General
Topic: Traffic Slow with webproxy transparent
Replies: 13
Views: 6094

Re: Traffic Slow with webproxy transparent

Hello dotnet

can u help me on that please?

http://forum.mikrotik.com/viewtopic.php?f=2&t=72850
by xtrgeo
Mon May 20, 2013 10:52 pm
Forum: General
Topic: 2 Lan's, 2 Wan's, PCC load balancing and proxy
Replies: 1
Views: 24520

2 Lan's, 2 Wan's, PCC load balancing and proxy

Hi all, I,ve configured my RB450G as: Eth1:Lan1 Eth2:Wan1 Eth3:Wan2 Eth4:Lan2 Eth5:Intranet I am using 2 Lan's because it's one has 2 IP's on it,in order to act as gateway for 2 small subnets and because those subnets has a lot of traffic between them. Eth5 is for accessing some building near via an...
by xtrgeo
Mon May 13, 2013 2:41 pm
Forum: General
Topic: Static routes same time with load balancing PCC
Replies: 0
Views: 1260

Static routes same time with load balancing PCC

Hello, I am trying to set up an RB450G in the way below: Ether1 - Lan - 10.64.132.64/26 Ether2 - WAN1 - 10.64.132.2/30 Ether3 - WAN2 - 10.66.56.250/24 Ether4 - Antenna - 192.168.50.1/24 I have used all the instructions from this turorial http://wiki.mikrotik.com/wiki/Manual:PCC to make a load balanc...
by xtrgeo
Wed Apr 17, 2013 12:12 pm
Forum: General
Topic: Load balancing (PCC) and transparent proxy at the same time?
Replies: 2
Views: 1138

Re: 2 gateways,load balancing,transparent proxy,parent proxy

any help on this please?????

bump
by xtrgeo
Tue Apr 16, 2013 10:32 pm
Forum: General
Topic: Load balancing (PCC) and transparent proxy at the same time?
Replies: 2
Views: 1138

Load balancing (PCC) and transparent proxy at the same time?

Hello all, I need some help in setting up a new network I am working on. There where 2 separete Lan's, with 2 separate gateways. Both gateways, required proxy settings in user's browser,in order to access the internet. I've putted an RB450G behind those 2 gateways and made the two separete lan's, to...
by xtrgeo
Mon Jun 11, 2012 3:04 pm
Forum: General
Topic: Help on accessing rb450g from internet
Replies: 5
Views: 1287

Re: Help on accessing rb450g from internet

It seems that the problem begins from the ADSL routers.As soon as I changed the ip service port on mikrotik from 80 to 8080,and forwarded this port from the ADSL routers,I can access the router from outside...
YES I will use secure connection and whitelist,thanks for the recommendation...
by xtrgeo
Fri Jun 08, 2012 8:20 pm
Forum: General
Topic: Help on accessing rb450g from internet
Replies: 5
Views: 1287

Re: Help on accessing rb450g from internet

Thnks for the answer. below is my confuguration [admin@xxxxx] /ip firewall filter> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=input action=accept protocol=tcp dst-port=80 1 X ;;; default configuration chain=input action=accept protocol=icmp 2 X ;;; default configuration chain=input ...
by xtrgeo
Fri Jun 08, 2012 12:18 am
Forum: General
Topic: Help on accessing rb450g from internet
Replies: 5
Views: 1287

Help on accessing rb450g from internet

Hello, my setup is that i have two adsl modem-routers for connecting to internet. Their Ip addresses are: modem 1: 192.168.2.1 modem 2: 192.168.3.1 These 2 are connected with my RB450G in eth2 and eth3 interfaces and their ip's are eth2: 192.168.2.2 eth3: 192.168.3.2 Using rules for pcc, traffic is ...