MikroTik

elmer

My config gone too, but with 6.19 - export don`t work as well, but sometimes...
After open Dude in windows machice, do it fast! (Works for me)
Click export button keep your finger on "enter" to immediately save backup

Sometime Dude closing connection, then save window not appear.

elmer

My DUDE server x86 on AthlonXP 2000+ 512DDR, Soltek MoBo has gone yesterday :( Update to 6.19 kills all the system packages. After install i`ll see kernel panic some hashes appeared on the monitor connected to station then... ...system stop loading on "Loading with..." Total crash... Did i...

elmer

RouterOS 6.x don`t have "/interface ethernet poe" command? My RB from MUM Italy still looks like that ;) Elmer, devi andate in interface / ethernet / ether10 / PoE [admin@MATRIX] /system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 routeros-mipsbe 6.12 1 system 6.12 2 X i...

elmer

RouterOS 6.x don`t have "/interface ethernet poe" command?
My RB from MUM Italy still looks like that

elmer

RB951Ui from MUM - RouterOS 6.5, connected to internet and then... /system package update upgrade router rebooted, all is ok but PoE firmware = 0.0 ;) Checked in the day of MUM on two routers, same effect... what is the output of these two commands? /interface ethernet poe settings print /interface...

elmer

RB951Ui-2HnD First problem is poe firmware. Second, installed dude 3.6, when i checked uninstall and reboot router dead. Third - netinstall 6.10 won`t work, 5.26 unbricked router, but poe out don`t works... After install 6.10 poe came to live, but firmware is still 0.0 :( PS. LED`s on ports don`t wo...

elmer

RB951Ui from MUM - RouterOS 6.5, connected to internet and then...
/system package update upgrade
router rebooted, all is ok but PoE firmware = 0.0

Checked in the day of MUM on two routers, same effect...

elmer

Hmmm... Winter time :) https://maps.google.pl/maps?saddr=Sosnowiec&daddr=Wenecja,+W%C5%82ochy&hl=pl&ie=UTF8&sll=46.860191,15.67749&sspn=3.80129,9.569092&geocode=FbhO_wIdT4EjASkpS9r-mdoWRzHbB2UroSpsyw%3BFU9ftQIde-u7ACmJPdbx2rF-RzEvEJK98Majew&oq=Sosnowiec,&t=h&mra=l...

elmer

Great luck and congrats on the clean up job but PLEASE record videos in horizontal orientation, plus whatever compression you are using is baaaad, 63mb for a 30 sec video.
Quote...

No compression, it is direct from my dropbox folder...
Fast recording with iPhone 4s

elmer

Please test scheduler for me :) IMO don`t work with new 6.3 rOS... /file remove email /system backup save name=email /tool e-mail send server=173.194.70.16 port=587 user=me@gmail.com password=mypass start-tls=yes to=me@gmail.com from=Router subject=Backup body="copy config router" file=ema...

elmer

After update to 6.3 does not work manual setting of speed interface ethernet

Works for me on RB433, why you dont write on which RB or x86 platform...? More info plz

elmer

SXT lite comes to Poland few days ago, these RB2011 not ;( I want 2 of them... Please...

elmer

In connection manager set firewall zone as trusted

Works perfect!

elmer

Yesterday i was travelling with my wife and son near watergate. After few days of raining water was down and what i find - check this! Original movie is here: https://www.dropbox.com/s/cxz9c7r09nq5u50/2013-06-17%2009.56.50.mov Or watch in YT here: https://www.youtube.com/watch?v=5nt5TvL_8DY RB HW i ...

elmer

Same here on CCR1036 only appear if the server restarts It's happening on my CCR1036 too. I know queues are working - I see it from the interface statistics, but all counters in the Queue Tree (when queues are showing, of course) are stuck. "/queue tree print rate" doesn't work either. P....

elmer

After the installing my RB is rebooting everytime. He never came up.
with hard reset it doesnt work.. every time a reboot in 60seconds..
help me!

Watchdog?

elmer

My RB435G after firmware update and reboot is unaccessible on all protocol

Internet works for now, but dhcp-server not! Must go reboot via power...

Problem resolved, CPU settings gone to 100Mhz... Disable WLAN`s set to normal 680Mhz
then reboot and enable WLAN resolved problem

elmer

After system / reset with one wlan card i have off course

one wlan1 interface.
When i plugged another card i have another wlan1... ALIX 1D with RB14 card, license LVL5.

elmer

Dynamic WDS after reconnect station WDS creates new, no replacement free# of them.
Routerboard upgrade won`t work on all RB from winbox, only terminal.
Wireless works super! Good work MT team!

elmer

Thanks, i will try

elmer

Have you tried to load secondary bootloader?

No response 4 all procedures described here

Without problem i`ll
replace all the chips - show me these chips please...

elmer

Just dead... After nothing...

I have other for parts, and hotair for removal part by part.
Which chip replace to have bootloader working? RS-232 show nothing because RB not booting!
https://www.dropbox.com/s/rvfmwmsn8p9rc ... .59.43.mov

elmer

What about wireless testing?

elmer

Got my 951G-2HnD yesterday, upgraded to 6r12 today. When doing a frequency scan, the device resets itself. Log entry: system,error,critical router was rebooted without proper shutdown by watchdog timer Upgrade firmware from menu System -> Routerboard -> Upgrade :) Restore to factory defaults, then ...

elmer

Another strange issue. In one point of my network i have RB-Groove as WAN (transparent) to Omnitik on ether5. ether5 is bridged with wlan1 and works as AP. Bridge has IP addres 10.1.1.x and on ether5 runs DHCP client from subnet which have access to internet. On ether1 ip 192.168.x.x/24 and dhcp-ser...

elmer

Something wrong in WDS-dynamic on AP and client?

elmer

For me v5.24 with all upgraded firmwares on all boards works for now excellent :) First day was strange, but after week i don`t see reboots or disconnects. On few routers i make reset-configuration then setup from zero - works fine! Good job! For now i testing v6rc11 on few boards and works too... W...

elmer

In RB2011 i have bios 3.04 where is upgrade for older boards?

elmer

5.24 + FW 3.02 + RB435G - when i change from wireless 802.11 to nv2 router reboots...
After reboot in log i see "kernel failure" - something wrong... RB433 in other place too

Changing "other things" like channel, and preamble or something makes reboot too...

elmer

After update to 5.23 on my x86 machine, dude server works but i cannot move devices over the map :/
Bug, or what?
This happened with our x86 router when we upgraded to 5.22.

Downgrade not works - any ideas?

elmer

After update to 5.23 on my x86 machine, dude server works but i cannot move devices over the map :/
Bug, or what?

elmer

I want to connect more of this devices, test was on two only...

elmer

Today i tried connect two OmniTik`s with MESH, and i am not satisfied...
550 meters (with google maps), dual chain A/N 20/40mhz and only !ONE! Mbit works.
Signal on both of them is about -72 - this is normal?
Devices on this same height, clean terrain / visibility 100%

elmer

Hello all
I have question about USB WLAN card in new RoS, why my card stop working
with Omnitik? Card have atheros chipset and works fine as HotSpot in 5.21

What about this? Please answer and delete duplicate post...

elmer

Hello all

I have question about USB WLAN card in new RoS, why my card stop working
with Omnitik? Card have atheros chipset and works fine as HotSpot in 5.21

elmer

When you set identity of router, and change it after - in neighboors stays old

elmer

This kinda problem has happened after a good downpour on my Grooves. have mailed with supout.rif to support & waiting for reply. I tried to reset & upgrade rOs but didnt help. Replacing them with fresh pieces did help. I have three groove`s with broken transmitter, how to send them on RMA? ...

elmer

HI ghassan, This is a very interesting mod. Do you think it will work with a RB751G-2HnD ? Would you mind sharing some upclose photos of the internals of your mod and how you soldered the SMA pigtails to the board ? I would also like to do it to increase my Client AP transmit/receive capability. Th...

elmer

My problem is the same on Omnitik + RB711GA-5HnD i station WDS mode.
Signal on chains is about 66-68 per each. How to solve this? RoS 5.17

elmer

Hello! After repair LAN of RB333 i want to update firmware / software, but after install RB won`t boot :( In console i`ll see this: MikroTik 5.17 MikroTik Login: Oops: Kernel access of bad area, sig: 11 [#1] RB333/RB600 last sysfs file: /sys/bus/spi/uevent NIP: 85366ae8 LR: 85366cf0 CTR: 801c387c RE...

Search found 40 matches