Community discussions

MikroTik App

Search found 42 matches

by Niex
Thu Mar 05, 2020 10:03 pm
Forum: RouterBOARD hardware
Topic: CCR1036 Power Supply
Replies: 62
Views: 15164

Re: CCR1036 Power Supply

Change the c10 capacitor, power supply ok now https://lh3.googleusercontent.com/sveB16Fy8Net6Nf0KlDPWhhYp9H55oMlRD8q8-S8sZaKLY2x6Hq4uSVTGsgz-khpxi_3rRL2rWOD4qk3r3qHS_vUhxE0vn7MHOtWuWkUsSJUNPn0uv5kVR-i2U6KGg3f8kDYZfFjsGSB6AKh4eNwaJOEXVQo6ynGlmtKZvt1IsqoaOgK7hGpei-MqvNR3YGUAX1xBi0jUXU0TpsDyUdnHqPOlCTK...
by Niex
Mon Jan 06, 2020 10:16 pm
Forum: General
Topic: Netinstall works with any ethernet port ?
Replies: 4
Views: 744

Re: Netinstall works with any ethernet port ?

Its a RB600A, to boot from a CF is only copy npk file into them ? Then you are really lucky. No, you can't just copy npk to card, you have to extract the netinstall kernel from netinstall.exe and directly write it to special partition on CF card. Here I documented entire process: http://www.r00t.cz...
by Niex
Mon Jan 06, 2020 8:13 pm
Forum: General
Topic: Netinstall works with any ethernet port ?
Replies: 4
Views: 744

Re: Netinstall works with any ethernet port ?

Routeboards can only netboot from network using ether1. This is limitation of board bios, not netinstall, but result is the same. You have to use ether1 and if it's defective, board is pretty much bricked. On one very specific case I manged to get around this by loading netinstall from CF card (on ...
by Niex
Mon Jan 06, 2020 7:19 pm
Forum: General
Topic: Netinstall works with any ethernet port ?
Replies: 4
Views: 744

Netinstall works with any ethernet port ?

I trying to netinstall a rb but the ether1 is defetive, is possible with ether 2 ou ether 3?
I sucessfull any other times, but using ether 1.
by Niex
Sun Dec 30, 2018 11:45 am
Forum: Wireless Networking
Topic: wAP LTE Kit International APN problem [SOLVED]
Replies: 24
Views: 7509

Re: wAP LTE Kit International APN problem [SOLVED]

Great, my LTE does not register
by Niex
Sun Dec 30, 2018 4:37 am
Forum: Wireless Networking
Topic: wAP LTE Kit International APN problem [SOLVED]
Replies: 24
Views: 7509

Re: wAP LTE Kit International APN problem [SOLVED]

Can update via Lan ??
by Niex
Thu Dec 27, 2018 11:19 pm
Forum: Wireless Networking
Topic: wAP LTE Kit International APN problem [SOLVED]
Replies: 24
Views: 7509

Re: wAP LTE Kit International APN problem [SOLVED]

My lte does not register 0:59:52 echo: lte,async,raw lte1: sent AT+CSQ 00:59:52 echo: lte,async,raw lte1: rcvd +CSQ: 99,99 [admin@MikroTik] > 00:59:55 echo: lte,async,raw lte1: sent AT+EEMGINFO? 00:59:55 echo: lte,async,raw lte1: rcvd OK 00:59:55 echo: lte,async,raw lte1: sent AT+CSQ 00:59:55 echo:...
by Niex
Wed Dec 26, 2018 8:43 pm
Forum: Wireless Networking
Topic: wAP LTE Kit International APN problem [SOLVED]
Replies: 24
Views: 7509

Re: wAP LTE Kit International APN problem [SOLVED]

My lte does not register 0:59:52 echo: lte,async,raw lte1: sent AT+CSQ 00:59:52 echo: lte,async,raw lte1: rcvd +CSQ: 99,99 [admin@MikroTik] > 00:59:55 echo: lte,async,raw lte1: sent AT+EEMGINFO? 00:59:55 echo: lte,async,raw lte1: rcvd OK 00:59:55 echo: lte,async,raw lte1: sent AT+CSQ 00:59:55 echo: ...
by Niex
Wed Dec 26, 2018 8:41 pm
Forum: Wireless Networking
Topic: wAP LTE Kit: lte1 interface does not register to austrian A1 network (static ip-APN) [SOLVED]
Replies: 13
Views: 6056

Re: wAP LTE Kit: lte1 interface does not register to austrian A1 network (static ip-APN) [SOLVED]

For the WAP LTE that needs a user authentication there is a need for a LTE firmware upgrade to v008. Please see the attachment how to do the LTE firmware upgrade. The LTE firmware upgrade can only be executed via active LTE connection as the LTE modem is connecting to the firmware server. How do th...
by Niex
Fri May 04, 2018 6:25 pm
Forum: Wireless Networking
Topic: Nv2 Security Profile Problem
Replies: 7
Views: 1787

Re: Nv2 Security Profile Problem

Same problem here.
Older versions works perfect with nv2+radius.
by Niex
Tue Apr 10, 2018 9:14 pm
Forum: Scripting
Topic: Massive update script
Replies: 1
Views: 509

Massive update script

I need a script to update to using ip range to my clients.
Cant do manual update, demands a lot of time
by Niex
Sat Sep 30, 2017 4:05 pm
Forum: General
Topic: Graphing problem
Replies: 0
Views: 454

Graphing problem

I am having problems with the mikrotik graph, whenever traffic exceeds 2gbs it bugs.
Version problem ??
by Niex
Tue Jun 13, 2017 9:30 pm
Forum: General
Topic: public btest receive problem
Replies: 3
Views: 1059

Re: public btest receive problem

Is icmp enable to 207.32.195.2 ? was timeout and back again
I also geting very slow speed on download tests, upload is around 600mb
1gbps link brazil

Image
by Niex
Sat Apr 02, 2016 2:06 pm
Forum: General
Topic: cant reset link down counter
Replies: 1
Views: 1355

cant reset link down counter

How i can reset the link down counter in the 6.33 version os ROS mikrotik CCR1016-12G
I click in the reset counter and nothing happens
by Niex
Wed Dec 09, 2015 2:49 pm
Forum: Scripting
Topic: Script for reboot based on wireless clients
Replies: 10
Views: 2735

Re: Script for reboot based on wireless clients

All clients are disconected and not concect anymore.
by Niex
Wed Dec 09, 2015 2:48 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 17346

Re: As we would like to evolve the wireless

Some news?
O would like to do a wireless scan like in nanostation, without disconnect, is that possible ?
by Niex
Fri Oct 02, 2015 11:30 pm
Forum: Scripting
Topic: Script for reboot based on wireless clients
Replies: 10
Views: 2735

Re: Script for reboot based on wireless clients

:local clientes [/interface wireless registration-table print count-only];
:local WarnAt 0

#:log info ($clientes);

:if ($clientes <= $WarnAt) do={
#:log info ($clientes);
/system reboot
}
by Niex
Mon Aug 31, 2015 2:57 pm
Forum: General
Topic: Search inside the log
Replies: 7
Views: 7276

Search inside the log

Is possible to implement a search inside de log ??
Same as "find" in the registration.
by Niex
Mon Jun 22, 2015 8:54 pm
Forum: Scripting
Topic: Script for reboot based on wireless clients
Replies: 10
Views: 2735

Script for reboot based on wireless clients

Needs a script to reboot a Omnitik when registered clients = 0 on wlan interfaces e ou virtual ssid´s.
Thanks in advance
by Niex
Fri Apr 11, 2014 5:19 pm
Forum: General
Topic: FCS error on CCR1016-12G
Replies: 0
Views: 1771

FCS error on CCR1016-12G

Hy guys i have a RB411U linked with a CCR1016-12G, i lost acess to RB411 after many fcs errors on CCR. When i plugged the cabe out the link light stays on. I reboot the CCR and link go ok. Both equipments are 6.10. All other ports on CCR are used and have no problems. The RB411 has no errors on log ...
by Niex
Thu Oct 03, 2013 8:30 pm
Forum: RouterBOARD hardware
Topic: CCR 1036 Ethernet problems
Replies: 15
Views: 4577

Re: CCR 1036 Ethernet problems

Running 6.4 problem solved
by Niex
Sat Sep 21, 2013 2:28 am
Forum: RouterBOARD hardware
Topic: CCR 1036 Ethernet problems
Replies: 15
Views: 4577

Re: CCR 1036 Ethernet problems

Its a serious problem !!!
And there is no solution.
Where is the staff or engineers os MK ?
by Niex
Mon Sep 16, 2013 2:19 pm
Forum: RouterBOARD hardware
Topic: CCR 1036 Ethernet problems
Replies: 15
Views: 4577

Re: CCR 1036 Ethernet problems

Update the CCR to 6.4, problem still
by Niex
Sat Sep 14, 2013 12:37 am
Forum: RouterBOARD hardware
Topic: CCR 1036 Ethernet problems
Replies: 15
Views: 4577

CCR 1036 Ethernet problems

Hy guys i have a CCR1036 12G board router running ospf. The ethernet ports that are in use, is going down to up and the ospf down. Before CCR we have a 1100 ah x2, this problem never happen, but with the improve of the link the 1100ah have to be replaced because cpu is 99% all the time. The CCR is r...
by Niex
Mon Aug 05, 2013 10:10 pm
Forum: RouterBOARD hardware
Topic: Omnitik UPA 4 red leds flashing
Replies: 2
Views: 914

Re: Omnitik UPA 4 red leds flashing

UP ^
no ideias ???
by Niex
Sat Aug 03, 2013 12:34 am
Forum: RouterBOARD hardware
Topic: Omnitik UPA 4 red leds flashing
Replies: 2
Views: 914

Omnitik UPA 4 red leds flashing

Hy guys sorry my english.
I have two new Omnitiks UPA 5HnD, when i power on the Omnitik on the POE port 1, the leds 2,3,4,5 stays flashing.
No beep, and the led 1 is off.
by Niex
Fri Feb 22, 2013 9:35 pm
Forum: General
Topic: Problem with license SXT
Replies: 5
Views: 1156

Re: Problem with license SXT

I receive one answer, send a supout file and still waiting.
:D
by Niex
Thu Feb 21, 2013 2:20 pm
Forum: General
Topic: Problem with license SXT
Replies: 5
Views: 1156

Re: Problem with license SXT

??????????????
:(
by Niex
Wed Feb 20, 2013 2:05 pm
Forum: General
Topic: Problem with license SXT
Replies: 5
Views: 1156

Re: Problem with license SXT

How i can solve this problem ?
Send email two days ago and no answer.
by Niex
Tue Feb 19, 2013 2:18 pm
Forum: General
Topic: Problem with license SXT
Replies: 5
Views: 1156

Problem with license SXT

Hy guys i have a sxt with problem on license, send a email ands no answer with S/N e HwID.
There is another way to the license ?
Sorry by my english.
by Niex
Fri Sep 28, 2012 4:36 pm
Forum: RouterBOARD hardware
Topic: problem with my SXT 5Hnd
Replies: 10
Views: 25931

Re: problem with my SXT 5Hnd

I release the s1400 before starts flash, not show in netinstall and no reboot.
I release the s1400 after stops flash, not show in netinstall and reboot 5 second later, its normal ?
by Niex
Fri Sep 28, 2012 2:17 pm
Forum: RouterBOARD hardware
Topic: problem with my SXT 5Hnd
Replies: 10
Views: 25931

Re: problem with my SXT 5Hnd

You may use netinstall
Not show in netinstall, its normal reboot after release de s1400 button ?
by Niex
Thu Sep 27, 2012 12:25 am
Forum: RouterBOARD hardware
Topic: problem with my SXT 5Hnd
Replies: 10
Views: 25931

Re: problem with my SXT 5Hnd

I have two sxt.
After holding reset s1400 and release after stops blinking (~20sec), 5 seconds after release, he restart and plays one beep.
Any help
by Niex
Thu Sep 27, 2012 12:16 am
Forum: RouterBOARD hardware
Topic: Recover SXT from Firmware Update Failure?
Replies: 9
Views: 8988

Re: Recover SXT from Firmware Update Failure?

I have two sxt.
After holding reset s1400 and release after stops blinking (~20sec), 5 seconds after release, he restart and plays one beep.
Any help
by Niex
Tue Jun 26, 2012 3:51 pm
Forum: RouterBOARD hardware
Topic: R52Hn heat/problems
Replies: 20
Views: 4378

Re: R52Hn heat/problems

I have a lot of this cards with problem.
Its so heat i cant touch then, signal after this is soo week.
Cooling/fan on this card is mandatory ?
I use then on a 433.
Any ideia of the cause os my problems ?
Thanks
by Niex
Mon Jun 25, 2012 3:00 pm
Forum: RouterBOARD hardware
Topic: RB 1100 AH no boot fatal error
Replies: 2
Views: 1748

Re: RB 1100 AH no boot fatal error



Fatal error 0x853
Please contact support@mikrotik.com

I would probably try contacting support. :)

The only other thing you could try is a netinstall.

http://wiki.mikrotik.com/wiki/Manual:Netinstall
Netinstall works
http://forum.mikrotik.com/viewtopic.php?f=3&t=63058
by Niex
Mon Jun 25, 2012 2:10 pm
Forum: RouterBOARD hardware
Topic: dont boot
Replies: 3
Views: 2048

Re: dont boot

Please download RouterOS v5.18 and reinstall the device with Netinstall. RouterOS v5.18 for RB1100AH: http://download2.mikrotik.com/routeros-powerpc-5.18.npk Netinstall: http://download2.mikrotik.com/netinstall-5.18.zip How to go into Netinstall mode with the RB1100AH: http://routerboard.com/pdf/35...
by Niex
Sun Jun 24, 2012 2:35 pm
Forum: RouterBOARD hardware
Topic: dont boot
Replies: 3
Views: 2048

dont boot

hy guys any help or procedure about this RB1100AH have been tested and "stocked" for 3 months, after that the problem sorry by my english RouterBOOT booter 2.37 RouterBoard 1100AH CPU frequency: 1066 MHz Memory size: 2048 MB Press any key within 2 seconds to enter setup.. trying bootp protocol.........
by Niex
Sat Jun 23, 2012 7:30 pm
Forum: RouterBOARD hardware
Topic: RB 1100 AH no boot fatal error
Replies: 0
Views: 488

RB 1100 AH no boot fatal error

hy guys sorry by my english i am from brazil. I buy one rb 1100ah 3 months ago, when comes to me i tested so far ok. After the test i not turn on anymore, now i will use the and problem appears. RouterBOOT booter 2.37 RouterBoard 1100AH CPU frequency: 1066 MHz Memory size: 2048 MB Press any key with...
by Niex
Sat Jun 23, 2012 7:25 pm
Forum: RouterBOARD hardware
Topic: RB 1100 AH no boot fatal error
Replies: 2
Views: 1748

RB 1100 AH no boot fatal error

hy guys, sorry by my english, i am from brazil. I have one RB1100 AH, i buy 3 months ago, i tested when he comes to me, its ok. After this i never turn the rb on again. Now i will use then and have a problem on boot. RouterBOOT booter 2.37 RouterBoard 1100AH CPU frequency: 1066 MHz Memory size: 2048...