I have an issue with the SSH private keys in routeros 6.4, im trying to do a login without password to a ubnt-nanostation i have already created the dsa public and private key and copy the public key to the nanostation,i can do the ssh login without password from a linux box, the problem is on the m...
Already tested for more than a week an they are wor toakwking well with the power adaptor which they come dunno what happen but they react with after i used the poe, I can't sent 15 RB to RMA I will lose my client in the time, I justuse the poe to make it react nothing more after that I'm using they...
Well we bought 17 RB751 on the company, and 9 of them were bricked, but we needed all for a project so we look for a solution, apparently when its powered for 6 mins or rebooted after configured (Mesh), something burnout (we dont open it, we smell something burned on the inside) all the leds start t...
Well we bought 17 RB751 on the company, and 9 of them are bricked, but we needed all for a project so we look for a solution, apparently when its powered for 6 mins, something burnout (we dont open it, we smell something burned on the inside) all the leds start to blink, so we have tryied another th...
i have the same problem, its kinda unstable, i use Nv2 with some clientes, its more stable but it have problems with the througput behind de wireless equipment on TCP protocol :/ but Nstreme is stable on throughput :/, i think we have to wait for some fixes about the protocols.
Hey all, i have a strange problem with the Nv2 protocol, i have the following network: LAN1___SEXTANT1-5HnD---SXTG-5Hnd___RB750___RB411 w/R52Hn&SectorAntenna---SEXTANT2-5HnD__LAN2 Legend: ---- Wireless ____Wired Between the two SEXTANT-5HnD i got a bandwidht of 30 Mbps, that is fabulous, but doi...
Doing some tests,the results on my case is noise, 00:16:00 Am the port stop flapping and start to traffic 100Mb until now 04:16:00 am, doing a bandwidth test is a 100Mbps Full duplex on UDP, so maybe its an RF noise to the cable or connector:/ FM transmissions ended at 00:00:00 on the tower, same ti...
Well, the results with an STP cable were the same :/, port flaping, so we tried to connect another omnitik to the omnitik (port 2 to all ports of the other omnitik), it works on all ports with 100 Mbps, so its a problem with the SXT an 411, the strange thing that i dont test it on the site is to con...
so we have an idea, replacing the omnitik switching ports with a TP-Link switch, i saw the port flapping stoped from the omnitik to the switch (100M connection link), So the SXT, 411, omnitik, and TP-Link is at the top of the tower? How long is the cable between the omnitik and the TP-Link? the pro...
We have the same problem here on Bolivia with SXT and 411, i tried to connect them to an omnitik on a 45m tower but start to flap the ethernet ports so i decided to test them on my office, i have test the connection from 411 to eth2 of the omnitik and from SXT-G to eth3 omnitik, and they worked like...
that rule is for external cache right? by the way are using any redirect rule to the external cache??? if you can show your mangle rules will be great. The external cache is a squid?
I think you need to configure Mikrotik webproxy and the external cache as a parent of the mikrotik webcache, and active the logging option for web-proxy.
Hmm MIMO determinates the Maximum HT-MCS index that you can use, for this case the chain represent the config of mimo 1x1, 1x2 ,2x1 , 2x2 if you have a 2x2 chain configuration your link can use a MCS 15, if you only have a 1x1 chain config , you can use only a mcs 7 as a maximum MCS. Note: MCS = Mod...
Hi all, right now im having a little problem interconecting two RB751U-2hnd via WDS, i have created two virtual AP, Venado and Venado Guest(invitado), the two SSID Venado are connected via wired LAN, but the Venado Guest is connected via WDS, the problem is the WDS link is disconnecting every minute...
I had the same problem, i have running a webproxy and usermanager+hotspot+radius, but it was a problem with the cache, i solved using a Max Cache size of none, and activating Cache on disk, for some reason with big files or too much files the flash starts to use a lot of cpu (this was happening to m...