MikroTik

lustyffh

Hi All, I've bought Audience recently. And to my surprise I realised that it didn't run from 12V power source. Although it's said to be " DC jack input Voltage - 12-57 V ". Actually, this is the first of my many Mikrotiks that doesn't want to run from 12V. Am I alone here? Tried to search ...

lustyffh

Hey, I got an Audience loaded with RC3 and WifiWave2. Wave2 package is here for about half a year. However, it seems to be very rough still. WifiWave2 doesn't seem to support clients in "station bridge" mode. I.e. proprietary extensions seem to be not in place for this driver yet - there's...

lustyffh

Hi, does anyone know what's the order of priority for Regex FWD DNS entries vs a static DNS sever lookup? I would like to foward all DNS queries to an offsite server. For that I created "catch all" static regex entry, i.e.: [admin@MikroTik] ip dns static> add regexp="(.*?)" forwa...

lustyffh

Hi All, sorry if it's noob's question. But I could findn't an answer myself. I've got IKEv2 VPN setup and running between two Mkrotiks. Client Mikrotik have dynamic NAT entries. It also has routing entry for the endpoint IP assigned by the headend Mikrotik. However, what strucks me is that there are...

lustyffh

I don't think it's doable in the way you imagined to do it. Thing is that there can only be one DHCP server in single L2 domain (there can be more than one but they need to be synchronized one way or another). But you can't divide your WiFi network to two L2 domains because you want to have single ...

lustyffh

This doesn't make much sense to me. You want to have clients separated but not separated? What do you want to achieve by using separate IP pools from same subnet on different radios? I've got two WANs (4G dongles) and I want different clients to connect to a different WAN at their discretion and no...

lustyffh

This doesn't make much sense to me. You want to have clients separated but not separated? What do you want to achieve by using separate IP pools from same subnet on different radios? I've got two WANs (4G dongles) and I want different clients to connect to a different WAN at their discretion and no...

lustyffh

It's what it says, it doesn't make sense to have DHCP only on one port, when all bridged ports are connected together. DHCP server belongs on the bridge interface itself. Good point, indeed! One can never understand why such basic things can disappear from one's mind =) @lustyffh what you expecting...

lustyffh

I wonder if mini-pcie toUSB adapter will work in this router? In such a way we could have had USB at the expense of 2ghz radio.

lustyffh

Hello, does anyone know why I can't configure DHCP if it's assigned to wireless interface? Interface is connected to the bridge. Strage thing is that sometimes I can commit changes to the dhcp server still. But most of the time it shows "DHCP server cannot run on slave interface". But at t...

lustyffh

just heads up to this thread! I need digest authentication on post/get. and seems like Mikrotik doesn't support even that thing.

lustyffh

Seems to be true based on the user feedback...

https://www.aliexpress.com/item/Wireles ... 77010.html

And Chineese folks can do the same for half the price.

lustyffh

Hi, I'm aware that Wireless Wire is to be used for line-of-sight links. However, I wonder if it's usable indoors at all? Specifically, I'd like to know if I can set it as wireless media for HDMI extender in my flat. Would it work at a distance of 5-10 meters and through a couple of brick walls? Any ...

lustyffh

Hi, pardon me if it's a noob question but anyway.... With regards to the new SXTsq series. The datasheet has wireless specificaitons. Are these the output figures at wireless chip or the overall device, i.e. including antenna gain?

lustyffh

There will never be a spectral scan for AC radio unless Mikrotik changes its business positioning. Don't you understand that spectral scan is a premium licensed feature from Qualcomm. If Mikrotik acquires such license it will no longer be competitive on the market. So far Mikrotiks are ~20% cheaper ...

lustyffh

Hi, just want to resurrect this thread. Can anyone confirm that fastpath is working with VLANs? I have plain wireless bridge which moves traffic to a software VLAN interface as on the picture. However, Fastpath doesn't pick up my multicast stream from WDS interface. At the same time unicast traffic ...

lustyffh

OK, seems like this was a one-person show =) I found the root cause of the problem. Fortunately for the Mikrotik community - it wasn't been a Mikrotik issue. The real issue is that Ligowave Propeller doesn't work properly with STP. RSTP was enabled on the Mikrotik bridge. Everything started to work ...

lustyffh

Any Mikrotik support here? In the meanwhile I did a fresh packet capture. During packet capture I did ARP ping which failed. Refer to the screenshot. However, packet capture clearly says that Propeller sends back ARP replies to Mikrotik. For some strange reason Mikrotik doesn't want to accept this A...

lustyffh

Hello, I have Ligowave Propeller 2 which is set to AP bridge. One wireless client is connected to this Propeller (another Propeller in station mode, i.e.P2P link). If I plug Propeller AP to Mikrotik bridged port then I cannot ping my Propeller anymore. However, if no wireless clients are connected t...

lustyffh

Hello, I've got mangle matcher to assign packet mark "bulk_traffic" to all packets that are not being marked as voip (do not shown). The matcher works fine but what surprises me is why I have much smaller packet counter on the queue tree that should match bulk_traffic. Refer to the screens...

lustyffh

You should use queue tree don't touch the interface queue for lte, this is dynamic and cannot be changed. http://mum.mikrotik.com/presentations/CZ09/QoS_Megis.pdf Look at page 27 Right your are! Thank you. I realised that "queue type" is just an idication of the deafult hardware queue whi...

lustyffh

Good morning, I am new with respect to Mikrotik, and bought a HAP-2nd RB941-TC Lite and I've tried everything to make it work with 2 Wan ports and a Lan and Wifi. Follow various procedures router configuration-OS and everything seems ok, but does not work the 2 wan ports. Someone with this model ma...

lustyffh

Hi Folks, I wanted to implement some sort of prioritisation for voip traffic. I connect to the Internet via 3G/4G modem. Modem is in hilink mode and so Mikrotik uses LTE interface for that. What I realised is that one cannot change queue type on the LTE interface. Which is set to "no-queue"...

lustyffh

Try 6.35.4 I see a change in the changelog in that area I know what that change means. It's just the fact that Mirkotik decided to stick just to one AT command to gather cell info. That confirms Mikrotik does use serial connection to the modem apart from NDIS or whatever driver they use in hilink m...

lustyffh

The signal's weakness between the WDS slave and AP is a big factor. Thank you, ZeroByte, for the exhaustive explanation. It all sounds familiar to me but I couldn't beleive speed degradation may be so drastic. Now, I see this looks normal and not a software glitch. In the meanwhile I tried switchin...

lustyffh

What MikroTik router do you use and what RouterOS version? I have used both HiLink and "ppp" modems from Huawei with good results, but not all RouterOS versions work. 6.35.2 is OK. Hi, I use RB751G-2hnd with v6.35.1 As I say hilink works just fine but what puzzles me is why I can't read ...

lustyffh

Hi, what throughput can I expect between the two RB751U-2hnD in the following setup? ap bridge -- wds slave wireless clients on both sides but they normally don't generate much traffic. These two boxes make seamless wifi between the two buildings in my country house. I tried running mikrotik bandwid...

lustyffh

Hi mates, I have Huawei E3372h 4G modem with modified firmware that allows one to open additional ports when using Hilink setup. The modem works fine in Mikrotik in Hilink mode, however I cannot get interface info. It says modem doesn't have serial interface. At the same time I can telnet to the mod...

lustyffh

Hi Folks,

an original script posted on Mikrotik wiki was based on comparing interface IP.
The new scripts posted above rely on web services. This new method doesn't work if one have multiple ISPs.
Can anyone share a script that works for specific WAN interface for multiple ISP environment?

lustyffh

Please note that RB912G-5HPND has no space to connect 3rd pigtail for an extension card. AUX2 almost sticks to the motherboard leaving no room for external pigtail.

lustyffh

....continued Next, I connected one client(laptop) to default-51. Tests are performed on the PC connected to default-5 still. Homedale [1.33]_2013-11-15_11-59-24.png Finally, I decided to run the test from the laptop connected to default-51. In parallel, PC runs it's own test and still shows diagram...

lustyffh

even if you set a higher tx-power than card supports it will not use that - it will automatically use the max supported power of the wireless cards. At what times are you monitoring the signal? When the signal drops - did you send more traffic? What tool are you using for monitoring the signal? I a...

lustyffh

Hi Mikrotik team,

there are quite a few 802.11ac pci-e cards available on sale already which a based on QCA chips. For example, Compex and SparkLan based on QCA9880.
When will Mikrotik start to support them?

lustyffh

Hi, what's the FCC-ID for R11e-5HnD? Anyone got the card already? Or better can anyone let me know if 500mw is a per channel or cumulative TX power? ////// upd 15-nov-2013 Looks like no FCC authorization been granted yet. Searched all Mikrotik authorizations and the latest one (Groove A-52HPn) is da...

lustyffh

please describe more detailed your problem. Also please note that tx-power-mode=card-rates are not working with AR93xx wireless chipset. If you want to lower the output power you need to use tx-power-mode=all-rates-fixed. Hello, thank you for your feedback! What other details do you need? The reaso...

lustyffh

doesn't anyone have a clue to this?

In the meanwhile, I have also tried a test by sitting closer to the AP. However, the result is similar:

lustyffh

dont use rb912 with any type of omini antenna ...use it just with dual chain sector antenna..... why? I have main card with omni antennas as well. Moreover, I've tried to swap first card antennas (5ghz only) with secondary card to no avail. I use RB912 as a home AP because of its power, robustness ...

lustyffh

Hi Folks, I've bought Atheros AR5BXB112 (AR9380) off eBay, installed it on my RB912UAG-5HPnD. Then I connected it via two additional pigtails to dual-band omni 5dbi antennas. It was recognized correctly and seems to be running fine. Logs are crystal clear as well. However, the gain seems to be spora...

lustyffh

Hello folks, i'm trying to setup load balancing with two ISP providers. ISP1 over Eth1 is using DHCP-assigned public IP. ISP1-default-route is from DHCP client. ISP2 over Eth2 is using L2TP connection. ISP2-default-route is from L2TP session. I have setup static /32 route for ISP2 L2TP gateway to po...

Search found 39 matches

Audience and 12V power

Re: v7.1rc3 [development] is released!

prefer static "catch all" Regex DNS over dynamic DNS lookup [SOLVED]

IKEv2 IPSec - no dynamic route entries

Re: DHCP server cannot run on slave interface

Re: DHCP server cannot run on slave interface

Re: DHCP server cannot run on slave interface

Re: DHCP server cannot run on slave interface

Re: RB4011

DHCP server cannot run on slave interface

Re: POST Request with fetch

Re: Wireless wire indoor use

[Solved] Wireless wire indoor use

Re: Newsletter 79 (MUM EUROPE ANNOUNCED!)

Re: AC equipment and spectral scan problem

Re: Fastpath on vlan interface.

Re: unable to ping Ligowave AP connected to Mikrotik RB951

Re: unable to ping Ligowave AP connected to Mikrotik RB951

[Resolved] unable to ping Ligowave AP connected to Mikrotik RB951

queue tree - missing marked traffic

Re: QoS on LTE interface

Re: HELP!!!! Re: hAP lite

[Solved] QoS on LTE interface

Re: LTE info - modem doesn't have serial interface

Re: wds slave - performance

Re: LTE info - modem doesn't have serial interface

[Solved] wds slave - performance

LTE info - modem doesn't have serial interface

Re: DDNS script for no-ip dyndns ipchange

Re: RB912UAG-5HPnD-OUT - how to open the case

Re: RB912UAG-5HPnD and additional AR9380 - intermittent gain

Re: RB912UAG-5HPnD and additional AR9380 - intermittent gain

802.11ac - Qualcomm Atheros 98xx support

Re: MikroTik News October 2013 (Issue #52)

Re: RB912UAG-5HPnD and additional AR9380 - intermittent gain

Re: RB912UAG-5HPnD and additional AR9380 - intermittent gain

Re: RB912UAG-5HPnD and additional AR9380 - intermittent gain

RB912UAG-5HPnD and additional AR9380 - intermittent gain

L2TP tunnel and load balancing