https://wiki.mikrotik.com/wiki/Manual:PeripheralsDoes MikroTik hEX works with USB 3G/4G Modems?
-MikroTik hEX lite
-MikroTik hEX PoE lite
But thi won't work on https sites. I am talking about tls-host functionality. How can you block more than 1 site using this feature?matiaszon - Depends on situation. You can add domain names to address list and then drop access to specific dst-address-list.
/ip firewall filter export
/ip firewall filter add action=accept chain=input comment="ssh" connection-state=established,related,new dst-port=22 protocol=tcp
Maybe just some APs simply don't support 5 GHz (they physically don't have 5 GHz radios built-in)?Some AP I see on 5GHz, but some AP are transmitting at a forbidden frequency and I cant see on my devices. Where is wrong settings?
What crutch? Sometimes, if you have no other way to get the public IP, it's the only way.It's a crutch.The other way is to set up a VPN on remote machine (VPS), and make port forwarding to your LAN through your router. This is what I have recently done.
And then what you need is just to set up some filter rules, if you don't want all 192.168.8.0/24 users to see "Server A".This is how I woud see your network, if you want to keep separated subnet 192.168.8.0/24
Did yo uset up proxy-arp for your LAN interface?Hello, I have configured a OpenVPN server on MT and it works fine besides one thing - I'd like to see windows network neighborhood while my windows PC is connected as a client. Is it possible to see it? How should it be configured?
There are a lot of topics on the forum about port forwarding. Even google knows how to do it.Hi! Im new to microtik, and i'm trying to portforward my minecraft server. Its ip adress is 192.168.88.29 and i have a routerboard 951g 2hnd. Can someone help? (P.S., my routers ip is 192.168.88.1)
What do you actually mean "the same public IP"? Could you make a diagram or something showing what do you want to achieve?So the RT2600ac would have the same public IP (as hEX), and be aware of it.
Why it is not possible when using RB951G with Huawei E3372 modem?it is possible do using the passthrough option:
https://wiki.mikrotik.com/wiki/Manual:I ... assthrough
It should be the same on MikroTik device equiped with USB LTE modem, but it's not! Or am I missing something...?Use the Passthrough feature like matiaszon mentioned - if your provider will give the public IP you will get that IP on the RB2011.
ping remote_ip_LAN interface=your_local_LAN_interface
I have multicast helper turned on but with keep alive frames on too.try disabling multicast helper, and enabling multicast buffering
And how did you wanted to do that?That's the point I was happy with safe mode. I was never able to connect to the device with no default configuration.
/ip route add dst-address=192.168.89.0/24 gateway=bridge-LAN pref-src=192.168.88.1
/ip firewall nat add chain=dstnat protocol=tcp port=1723 in-interface=ether1 action=dst-nat to-addresses=x.x.0.20 to-ports=1723