If you are already running RouterOS, upgrading to the latest version is simple. Just one click, and RouterOS will find the latest version, show you the changelog, and offer to upgrade. You can do this from Winbox, console, Webfig or QuickSet. Simply click “Check for updates” in QuickSet, Webfig or ...

I don't know. Tell me

Does the RB1100ahx2 need to be configured it in some way if I want to connect an access point? Or can I just plug it in?

Try 192.168.88.1 on port 1

Thanks for your reply.

I guess I do not have to worry

Router is RB1100AHx2.
RouterOS 5.22
When checking firmware my current firmware is 3.02 and upgrade firmware is 2.39.
How can this be possible?

Well finally it works. Thanks!

I set the WAN on ether 13.

There is no Quick set so I need to do it manually. 192.168.88.1 is default on ether 1 so when I set ether to that address I got same addresses on both ports? How can I get rid of it on port 1? # feb/06/2013 16:26:17 by RouterOS 5.22 # software id = TQBA-3U8S # /interface ethernet set 2 name=WAN set ...

I thought every port needed an IP?

What is wrong with this setup? I do get an IP address and the system time is updated so I know have some contact with the outside world but I cant surf the web? # feb/06/2013 15:31:33 by RouterOS 5.22 # software id = TQBA-3U8S # /interface ethernet set 2 name=WAN set 3 name=LAN set 4 master-port=LAN...

Actually mine works now, but it doesn't show any IP in this view

It seems that I have the same problem. I got mine today and it will not get an IP address, I updated to version 5.23 first thing, maybe that was a mistake? I can log in to it and do some configuration but it wont get an IP address in dynamic mode. I will bring it to my work tomorrow and try to set s...

I cant connect to internet. What is wrong with this file? # jan/02/1970 01:04:43 by RouterOS 5.22 # software id = TQBA-3U8S # /interface ethernet set 0 name=LAN set 2 name=WAN set 8 master-port=LAN name=LAN-slave set 9 master-port=LAN name=LAN-slave2 set 10 master-port=LAN name=LAN-slave3 set 11 mas...

Is DHCP confirmed broken?

Maybe it was in an earlier version.

I dont know, read it here in the forum

Try to use only port1-10. We see problems with the upper ports.

http://forum.mikrotik.com/viewtopic.php ... sh#p335676

Using the MAC address worked. Thank you so much.

Another question, can I use ether 13 for WAN?
I read somewhere before that the higher ports did not work so well.

Yes it shows when i click the dots.

I will try mac address later when I come back to my work. Do I just replace the IP-address with MAC address?

IP address

Thanks for links to information.

I had some problem with IP/Route and Firewall/Nat and now I cant log in to it.

Winbox finds the router on all ports that is configured but I cant log in, it just times out?

Can someone please provide a setup script to get this router started.

I need to set
IP from provider
dhcp server
nat wan to lan

Thanks

(missing the quick set from my 751)

Ordered one RB1100AHx2 today

Thank you!

I have an old Linksys RV082 that has become very very slow. We are 35 connected users daily and sometimes it peaks to 50. I have two 24 port switches and three Ubiquity unifi accesspoints connected. Most users connects via wifi. The wired network is all with cat 6 cables. The internet connection is ...

Update:

It seems that the DNS is stuck on the old one 192.168.88.1 and that's what's causing the problem. I changed it to 8.8.8.8 and then it works

I think it would be nice if it changed when router IP is changed or at least it could be managed on the "Quick set" page

/Buck

If I change my lan ip from
192.168.88.1/24 to 192.168.1.1/24
and dhcp range from
192.168.88.10-192.168.88.254 to 192.168.1.20-192.168.1.199
it ends up with no internet connection?

I used the quick set to make the changes version 5.19 and the device is RB751U-2HnD

Thanks

/Buck