This was the last answer that sounded like it's like that because of stability... The performance drop that you see in RouterOS 6.13 and later is because of our stability improvements over tunneling protocols which also affects SSTP performance. There were several crashes reported in v6.12 using SST...
With 6.15 now the connection is not dropped anymore when idle but as soon as the full bandwith is used for transfer the issue described here comes again. The number of times the conn timeout comes seems to be dependent on the value of "Keepalive Timeout" set on the SSTP-Server and the SSTP...
Hi, now, after having gone back to 5.26 I finally found the solution. In 5.26 I noticed if I set a rate limit for the ppp profile I never got over ~ 2mbps ... and that's was similar to the stuff above. when I set the buffer of the default small queue up to 50 (I think it was 5?) then I suddenly got ...
In general the DSL-links are quite stable and I'm not aware of retransmits issues. I tested the final 6.14, the speed is the same. So for the 10mbit link (in theory) I get about 1.4mbit transfer. That's only about 15%. If it's caused by TCP retransmits it shouldn't have such a big influence in the L...
I did, Ticket #2014060266000621. The strange thing I don't understand is that the speed measured in the LAN is higher that the speed over the DSL-Link. In my thinking, then the DSL-Link-Speed should be able to be achieved... Very weird, it looks the SSTP Link only uses a percentage of the availible ...
Since the update to 6.13 I have quite big trouble with the speed of sstp-connections. So I made several tests the last days but I can’t figure out how I could make it work and it really seams to be a correlation with the software version. http://forum.mikrotik.com/download/file.php?mode=view&id=...
Hi, since 6.13 I have a really bad sstp-throughput. I tried 6.9 - 6.12 yesterday and it's always been about 1 MB/s (that's about what the line can do). With 6.13 (inkl. the rc-versions) I get a maximum of about 200 kB/s. The setup: Lan1 Lan2 MikroTik <-> AVM Router <-> Internet <-> AVM Router <-> Mi...
SSTP problems still persist: We have SSTP server-client interconnections between 6 MT routers, all of which share *exactly* the same settings. After upgrading them to v6.12, some pairs would connect without problems, others however would disconnect after roughly one minute, mostly returning a "...
Hi, I'm using Router OS for about half a year now and used it quite a lot but I can't get a specific traffic shaping to work on a rb2011uas. (now 6.0rc4 installed) Explanation in short: Port 1 is connected to a Network 192.168.254.1 to connect to the internet. Port 2 & 3 & 4 are bridged and ...
Somehow I got confused as I searched for features that should be there ... but weren't and I thought I looked in advanced mode ... but seems I did with the older firmware.
Anyway... I thought a still missing update must be the issue...
But, found everything and now seeing clearer.
Hi, maybe someone can give me a hint how I can update the groove a-2hn to version 5.19. I tried and now in System > Packages everything is showing 5.19 but in System > Routerboard it's still showing 2.41. Transferring the 5.19 Software again does not change a thing. The System > Routerboard info is ...