Community discussions

MikroTik App

Search found 22 matches

by victornunes
Fri Nov 13, 2015 7:46 pm
Forum: General
Topic: Implement delay in packets.
Replies: 1
Views: 759

Implement delay in packets.

Hello,

Is there any way to implement a specific delay for a specific stream of packets?
For example, I specify a stream to a prefix as 192.168.0.0/24 and say that all packets
that are part of that prefix, implement one delay of 10 ms in the packet.
by victornunes
Mon Jan 05, 2015 3:33 pm
Forum: Forwarding Protocols
Topic: PBR and VRF
Replies: 3
Views: 1320

Re: PBR and VRF

Ok CelticComns. Thanks for reply. Sorry if I have been somewhat confused in my description. I'll try to be clearer. I own a running BGP / VRF environment. As such, The vrf prefixes learned from the VRF on an own routing table. When I create an PBR, I need to create a new routing table. So, for examp...
by victornunes
Mon Dec 29, 2014 4:19 pm
Forum: Forwarding Protocols
Topic: PBR and VRF
Replies: 3
Views: 1320

Re: PBR and VRF

Has anyone experienced a similar situation?
Someone could understand my situation?
If anyone needs, I can try to explain differently.
by victornunes
Mon Dec 15, 2014 2:21 am
Forum: Forwarding Protocols
Topic: PBR and VRF
Replies: 3
Views: 1320

PBR and VRF

gentlemen, I have the following scenario ROU1 and ROU2 not disclose routes, only a default route. ROU2 is the main, ROU1 is the secondary. So, ROU3 and ROU4 has a default route for ROU2. The Client1 e Client2 reach the ROU2 services through the default route. I need to implement a way that "client1"...
by victornunes
Wed Nov 12, 2014 3:30 am
Forum: Forwarding Protocols
Topic: stable release for BGP
Replies: 2
Views: 1438

stable release for BGP

Hello, What version of RouterOS that stable and works well bgp / vrf / mpls. I have been testing these features in version 6:21 and I have not had much success. Are default routes that mikrotik is spreading without my having explained it. VRF are having the correct routes that were configured, but n...
by victornunes
Thu Sep 25, 2014 3:17 pm
Forum: Forwarding Protocols
Topic: OSPF LSA type 10
Replies: 1
Views: 995

OSPF LSA type 10

Hello,

The mikrotik implements rfc 2370 (LSA type 10)?
I just want to confirm.
In the link below is not very clear.

http://wiki.mikrotik.com/wiki/Manual:OSPF_Case_Studies
by victornunes
Mon May 05, 2014 2:43 pm
Forum: Forwarding Protocols
Topic: MPLS latency.
Replies: 11
Views: 5067

Re: MPLS latency.

Let me update the situation In tests conducted with the goal of finding exactly the point that the latency was increased , I discovered something very interesting. The test had consisted solely using the " ping " command and wireshark software . I ran wireshark on two ubiquiti radios , and the test ...
by victornunes
Mon Feb 10, 2014 2:57 am
Forum: Wireless Networking
Topic: Bridge 802.11 problem
Replies: 0
Views: 865

Bridge 802.11 problem

Hello, I am having trouble closing a 802.11 link with two mikrotiks 411AHN. I can establish the connection wlan correctly, but when I put the wlan interface in the bridge, along with the eth1 interface, the wlan connection down This only happens when I put the wlan bridge the two radios. For example...
by victornunes
Wed Jan 15, 2014 1:13 pm
Forum: General
Topic: Tools>Profile>Networking v6
Replies: 2
Views: 1562

Re: Tools>Profile>Networking v6

Please normis, that means traffic of an interface has been placed in a queue by mistake, the RouterOS identified the error and fixed it?
by victornunes
Tue Sep 03, 2013 5:15 pm
Forum: Forwarding Protocols
Topic: OSPF stub cost
Replies: 4
Views: 1557

Re: OSPF stub cost

So, in this case the R3 is not why the ABR R3 I created two instances ospf and two loopback interfaces In one instance I put ether1 and loopback 1 and in the two instance I put ether2 and loopback 2 and instance 1 and 2 I put the network 172.30.0.0/16. I would like to force the download and upload t...
by victornunes
Mon Sep 02, 2013 11:41 pm
Forum: Forwarding Protocols
Topic: OSPF stub cost
Replies: 4
Views: 1557

Re: OSPF stub cost

Ok @ IPANetEngineer I drew the figure wrong. Follows the correct figure. see if it improves a bit. In ROU3 I have two OSPF instances, one for each area. We distribute the network 172.30.0.0/16 two areas. I can choose the upload traffic handling cost of the interface, but how can I choose the downloa...
by victornunes
Mon Sep 02, 2013 9:04 pm
Forum: Forwarding Protocols
Topic: OSPF stub cost
Replies: 4
Views: 1557

OSPF stub cost

Hello, I'm trying to check a few things in ospf, including a scenario like the figure. In ROU 3 I have a network (172.30.0.0/16) being announced through area 16 and area 17. I can force the upload traféo out the interface I want by manipulating the cost of the interface. However, I am facing difficu...
by victornunes
Mon Aug 05, 2013 2:25 pm
Forum: Forwarding Protocols
Topic: Advertise with low or high distance /OSPF and iBGP/
Replies: 3
Views: 2309

Re: Advertise with low or high distance /OSPF and iBGP/

I have a network being advertised by OSPF for two interfaces. I can handle the cost of the interface which is the output interface for traffic originating from that network, but as I do that the other router to send traffic for that network through the same interface that it came out? Is there any a...
by victornunes
Sun Feb 03, 2013 8:54 pm
Forum: Forwarding Protocols
Topic: MPLS latency.
Replies: 11
Views: 5067

Re: MPLS latency.

okay.

But remembering, excessive latency occurs with packets of 56 bytes.
by victornunes
Sun Feb 03, 2013 6:46 pm
Forum: Forwarding Protocols
Topic: MPLS latency.
Replies: 11
Views: 5067

Re: MPLS latency.

With a mtu of 1518, I can guarantee delivery of 1500 bytes without fragmentation ip.

I did this test with a bit ping with "Do not Fragment".

Remember that the above are my tests with packets of 56 bytes, ie, no need to enter (yet) the merits of mtu.
by victornunes
Sun Feb 03, 2013 5:09 pm
Forum: Forwarding Protocols
Topic: MPLS latency.
Replies: 11
Views: 5067

Re: MPLS latency.

okay. Describe the types of links between the router that I did ping to the first hop, 10.10.16.1, why the high latency jpa begins on the first jump, which means that if I find the solution, I can extend to other links rb4500 - ubiquiti(nanobridge m5) - ubiquiti(rocket m5) - rb1100(10.10.16.1). rb54...
by victornunes
Sun Feb 03, 2013 1:15 am
Forum: Forwarding Protocols
Topic: MPLS latency.
Replies: 11
Views: 5067

MPLS latency.

Hello everybody. I realized that with the use of mpls, latency with a simple ping mikrotik default of 56 bytes jiiter adds a very high combined with a high latency. see for example, results in a sequence of three consecutive traceroute mpls with and one without mpls along a sequence of pings 20 for ...
by victornunes
Mon Oct 15, 2012 5:57 pm
Forum: General
Topic: 5.21 released
Replies: 78
Views: 20999

Re: 5.21 released

*) fix MPLS MTU configuration usage;

Can anyone explain what the error was occurring with the mpls mtu?

Att,
by victornunes
Thu Sep 13, 2012 3:50 am
Forum: Forwarding Protocols
Topic: problem with ospf
Replies: 1
Views: 807

problem with ospf

I'm facing some problems with ospf itself. I configured the instance to not deliver any route (or route directly connected or anything), and configured on the "networks" networks that I want the ospf distribute. But the ospf is not distributing these routes, just learning from others. I have 2 route...
by victornunes
Mon Sep 10, 2012 4:29 pm
Forum: Forwarding Protocols
Topic: MPLS domains
Replies: 0
Views: 664

MPLS domains

Hello, in circumstances using multiple MPLS domains would be ideal?
An MPLS routing table size that could be served perfectly well by just a single MPLS domain?

What other circumstances should I consider when studying implentar a domain or multiple domains on a network?

Att,
by victornunes
Mon Aug 06, 2012 7:47 pm
Forum: Forwarding Protocols
Topic: ip/route > rules
Replies: 3
Views: 3286

Re: ip/route > rules

So if I ping 10.10.1.x having a source address 10.10.2.x,
the process adopted by MikroTik will send to the default route 10.10.2.x, not
10.10.1.x send directly through the interface, as a directly connected route?
by victornunes
Sun Aug 05, 2012 7:53 am
Forum: Forwarding Protocols
Topic: ip/route > rules
Replies: 3
Views: 3286

ip/route > rules

Hello, I created three rules in the Rules tab, adding a table to each network. 10.10.1.0 action=lookup table 200 10.10.2.0 action=lookup table 300 10.10.3.0 action=lookup table 400 So I created three routes defaults for each table created above. address1 with table 200 address2 with table 300 addres...