"so it can be surmised that C1442 and C1443 are in charge of the temperature monitoring of the CCR." Capacitors block DC, let AC pass and store energy. They would not be able to be in charge of temperature monitoring. Capacitors of that size are electrolytic (contain a paste) and if they ...

I have a CCR1009-8G-1S-1S+PC - https://mikrotik.com/product/CCR1009-8G-1S-1SplusPC that is overheating and rebooting with the following in the log: "Number of temperature exceptions: 122" I saw this post - https://www.reddit.com/r/mikrotik/comments/e2xxa0/ccr1036_overheating_anything_i_can...

The wireless-fp package v6.35.2 is still there after upgrading to 6.37rc.
Trying to uninstall it doesn't work.

Implementing RFC3021 is long overdue. I for one simply do not use the Mikrotik /32 method because IP designs should avoid depending on proprietary features when a perfectly good RFC is available, suitable and supported by multiple vendors. I second the feature request and would add that any mention...

Agreed that it would be useful to have especially when peering in IXes so as not to propagate route flaps to other peers.

+2

I am currently on ROS 6.28 RC20. I am having an issue when upgrading to ROS 6.28 that my connectivity totally breaks. Let me describe the issue I am having. Currently I am using a CCR1036-8G-2S+ with a bonded link using 2 1 Gbps ports using LACP to my switch. Over the bonded link, I have 3 VLANs, V...

I am currently on ROS 6.28 RC20. I am having an issue when upgrading to ROS 6.28 that my connectivity totally breaks. Let me describe the issue I am having. Currently I am using a CCR1036-8G-2S+ with a bonded link using 2 1 Gbps ports using LACP to my switch. Over the bonded link, I have 3 VLANs, VL...

Issue: Commenting BGP peer when BGP session is established causes BGP to reconnect. Description: When I have a BGP peer that is established. And I put a comment in BGP peer. BGP session with peers reconnects. Versions affected: MikroTik RouterOS 6.27, 6.28rc11 How to reproduce: 1) Login to WinBox. 2...

next RotuerOS should have this issue resolved. Hi janisk, Thanks for the reply. Just to enquire about something. I was just trying 6.23rc2, and although I see that the GRE tunnels are in running (R) status. But no connections are establishing over the GRE tunnels. So I guess it's still a work in pr...

Hi all, I am currently having an issue with GRE tunnels on 6.22. I have around 20 GRE tunnels on it. On 6.21.1, the GRE tunnels were running fine, in the interface lists, it states the GRE status is running "R", but when I upgraded to 6.22, most of my tunnels are not running, doesn't have ...

Hi,

I would like to inquire if anything has changed for IPSec between 6.20rc7 and 6.20rc16?
It seems that when I upgrade to 6.20rc16 from 6.20rc7, using the same config. None of my IPSec sessions are establishing

Sorry but I'm out of ideas here without looking at it myself. I hope you get something from file submissions. Hi joshaven, thanks for your ideas previously. :D Just to update this thread with the response that I got form a MikroTik staff from the support email I sent. Hello, /31 addresses are not s...

Have you tried nexthop-choice=propagate which will: "try to propagate further the nexthop received; i.e. if the route has BGP NEXT_HOP attribute, then use it as the nexthop, otherwise fall back to the default case"? "set-in-nexthop (IP address;) set gateway value to the specific IP a...

Thanks, looking into it. Hi normis, just an update. I have just added another peer using the following commands below. And the routes announced by the peer have the correct gateway of 172.22.41.232, but nexthop recursive via my WAN gateway - ether1-gateway. /ip address add address=172.22.41.233/31 ...

Hi all, By the way, just got a CloudCoreRouter 1036-8G-2S+ to handle my home's multiple 2x 1 Gbps lines, everything's mostly working fine. With the exception of some minor issues with RouterOS and then some slightly more troublesome issues. I'm running RouterOS 6.10 and on the newest firmware. 1) I...

Here's the snippets of configuration for the BGP peer. The other endpoint is not controlled by me, and is not a Routerboard / RouterOS, but if I remember correctly, either a Quagga / BIRD server. /ip address add address=172.23.253.1/32 interface=gre-tunnel3-siska network=172.23.253.1 /ip route add d...

Hi all, By the way, just got a CloudCoreRouter 1036-8G-2S+ to handle my home's multiple 2x 1 Gbps lines, everything's mostly working fine. With the exception of some minor issues with RouterOS and then some slightly more troublesome issues. I'm running RouterOS 6.10 and on the newest firmware. 1) I ...

Just to further elaborate the situation.

When I connect to the VPN on my RB2011LS on the 172.16.1.0 segment. When I ping my computers e.g. 192.168.88.11 and 192.168.88.12, I cannot ping them and also cannot access them.

Only when disabling Port 2, does the connecting and pinging work.

Hi, I have a setup of a Mikrotik RB2011LS at home. WAN / Port 1 is connected to my Main Fiber line, while WAN / Port 2 is connected to my US VPN line for watching Netflix and Hulu. I have setup pre routing rules to forward Netflix and Hulu traffic to WAN 2. I have also setup a VPN for connecting to ...

Figured it out,
In. interface had to be filled in for the WAN interface.

Hi all, Just a question. How do I do double port forwarding? I currently have 2 routers, the RouterBoard is behind my main router, the main router has all ports forwarded to the RouterBoard, and I have a server behind the RouterBoard, for example if I wanted to forward Port 22 for SSH? It will go th...

Hello you can do this with one mikrotik my friend.if you need help for configuration we are here... Good Luck Hi hassibi. Thanks for the reply. Just curious, which RB would you get if you could? RB450G, RB750GL or RB2011LS? Just looking around to see before I put the money down for a purchase of a ...

Hi all, haven't bought a Mikrotik, but planning to do so soon. I'm thinking of getting a Mikrotik for setting up both a VPN server and VPN Client on 1 Mikrotik itself. I'm thinking to set up a PPTP / L2TP VPN server behind another router on a Mikrotik so that I could connect back to my home network ...