Community discussions

MikroTik App

Search found 25 matches

by jazier
Thu Aug 29, 2013 5:04 pm
Forum: General
Topic: Problem after blackout
Replies: 0
Views: 430

Problem after blackout

Dear Mikrotik forum, I had a strange issue I would like to share with you. Well, I have a PTP link with RB435G and Compex Atheros AR9220 MINI PCIs. both nodes have a basic configuration as Bridge1 between Ether1 and Wlan1. Bridge IP is 192.168.1.1/24 in the first node and 192.168.1.2/24 in the secon...
by jazier
Fri Jun 07, 2013 7:42 pm
Forum: Wireless Networking
Topic: AP and station on single wireless adapter
Replies: 1
Views: 844

Re: AP and station on single wireless adapter

That is not possible. You can choose just one RF mode. Your wireless card will work as an AP or as a Station but not both at the same time.
by jazier
Tue Apr 30, 2013 12:53 am
Forum: Wireless Networking
Topic: 2.4GHz crowded - which channel/width to choose
Replies: 2
Views: 1165

Re: 2.4GHz crowded - which channel/width to choose

I guess, you could choose channel 3 or 4. Also you can reduce the channel width but it depends of your needs.
by jazier
Wed Apr 17, 2013 12:54 am
Forum: General
Topic: NV2 and Bonding
Replies: 0
Views: 615

NV2 and Bonding

Dear Mikrotik forum, have someone of you tested NV2 and bonding together? Currently, I have 2 RB435G with 2 Mini PCIs each one. Everything works fine when I configure NV2 and bonding, but when I enable ARP link monitoring I can not ping one Mikrotik from the other one. I mean there is not connectivi...
by jazier
Mon Mar 18, 2013 5:16 pm
Forum: Wireless Networking
Topic: 802.11ac Mini PCI
Replies: 19
Views: 10609

Re: 802.11ac Mini PCI

Thanks for your answer. At least, I know Router OS does not support this kind of Mini PCIs right now.
by jazier
Fri Mar 15, 2013 10:51 pm
Forum: Wireless Networking
Topic: 802.11ac Mini PCI
Replies: 19
Views: 10609

Re: 802.11ac Mini PCI

Dear have you tested some of these Mini PCIs? Thanks.
by jazier
Fri Mar 15, 2013 1:52 am
Forum: Wireless Networking
Topic: 802.11ac Mini PCI
Replies: 19
Views: 10609

802.11ac Mini PCI

Dear Mikrotik Forum,
do you know if Mikrotik is compatible with some 802.11ac Mini PCI?. It seems interesting not because of channel width but cause of 256QAM modulation. I checked some old post but I did not find it. Thanks a lot.
by jazier
Mon Jan 14, 2013 4:42 pm
Forum: General
Topic: PING an IP address assigned to a VLAN interface on an RB1200
Replies: 5
Views: 3860

Re: PING an IP address assigned to a VLAN interface on an RB

Hi again. PC belongs to vlan 2 and all devices have only one IP address (PC, switch, and Mikrotik). PC can ping IP address of switch vlan 2 and IP address of Mikrotik's vlan 2. Regarding to my configuration, I only created vlan 2 and I assigned IP addres to this vlan 2 on Mikrotik. Good luck.
by jazier
Sat Jan 12, 2013 1:15 am
Forum: General
Topic: PING an IP address assigned to a VLAN interface on an RB1200
Replies: 5
Views: 3860

Re: PING an IP address assigned to a VLAN interface on an RB

Hi. I have tested this scenario and it works. PC-------switch (HP)---------Mikrotik (RB435G) PC is connected to a switch through an untagged port. Switch is connected to Mikrotik via a trunk port. Mikrotik is connected to swith through a tagged port. PC is in vlan 2. Switch trunk port is tagged on v...
by jazier
Mon Dec 10, 2012 8:21 pm
Forum: Wireless Networking
Topic: Question about Nstreme
Replies: 3
Views: 1096

Re: Question about Nstreme

Thanks. I believe I understood.
by jazier
Sat Dec 08, 2012 12:18 am
Forum: Forwarding Protocols
Topic: Multicasting issue
Replies: 7
Views: 4892

Re: Multicasting issue

Hi, maybe this link can help you. I agree with you about Mikrotik multicast Wiki. I forgot, the link is http://forum.mikrotik.com/viewtopic.php?f=1&t=19359
Bye. If you success please tell me.
by jazier
Sat Dec 08, 2012 12:11 am
Forum: General
Topic: Serial port connection
Replies: 7
Views: 8585

Re: Serial port connection

Hi man. You should first look information on Internet. You can use any terminal software as Hyperterminal or Putty.
by jazier
Sat Dec 08, 2012 12:09 am
Forum: Wireless Networking
Topic: Question about Nstreme
Replies: 3
Views: 1096

Re: Question about Nstreme

Please, I need some help. Thanks.
by jazier
Thu Dec 06, 2012 7:30 pm
Forum: Wireless Networking
Topic: Question about Nstreme
Replies: 3
Views: 1096

Question about Nstreme

Dear Mikrotik Forum, I am confused about Nstreme, so I would like you answer my doubt. What the difference is when I set my wireless card as: 1. "interface wireless set wireless-protocol=nstreme 0" 2. "interface wireless nstreme set enable-nstreme=yes 0" Both command lines do the same?, Should I set...
by jazier
Thu Oct 18, 2012 5:45 pm
Forum: General
Topic: ECMP Check Gateway Problem
Replies: 1
Views: 632

Re: ECMP Check Gateway Problem

Hello, someone can suggest any idea? :(
by jazier
Tue Oct 16, 2012 2:32 am
Forum: General
Topic: ECMP Check Gateway Problem
Replies: 1
Views: 632

ECMP Check Gateway Problem

Dear Friends, I have the next scenario: 10.10.10.0/24--------R1-------------R2-----------20.20.20.0/24. The link between R1 and R2 is through Ether1 in both routers. Ether1 has two vlans: Vlan10 and Vlan20 in both routers. Vlan 10 is 30.30.30.0/24 and Vlan 20 is 40.40.40.0/24. 10.10.10.0/24--------R...
by jazier
Mon Oct 08, 2012 6:47 pm
Forum: General
Topic: can routerOS be used to detect nearby wifi devices?
Replies: 2
Views: 656

Re: can routerOS be used to detect nearby wifi devices?

Dear,
i do not understand your question at all but you can use SCANNER, FREQUENCY USAGE and WIRELESS SNOOPER tools for this purpose. All of them are in the wireless tab.
by jazier
Mon Oct 08, 2012 6:44 pm
Forum: Beginner Basics
Topic: Difference between SXT bridge and sxt station
Replies: 2
Views: 793

Re: omnitik u-5hnd

Dear, It is easy. first use MK PoE and power OmniTik via its Ethernet 1. Then connect your computer and using Winbox choose the Access Point Bridge wireless Mode (choose SSID, Frecuency, Protocol, etc). in SXT device you must do the same but the difference is that you must choose a client mode (Stat...
by jazier
Mon Oct 08, 2012 6:39 pm
Forum: Wireless Networking
Topic: SXT 5HnD link 2 km in PTP Bridge
Replies: 2
Views: 1106

Re: SXT 5HnD link 2 km in PTP Bridge

Dear,
According to datasheet you can get maximum 200Mbps real throughput. you got 20M bytes per second which is 20x8Mbps = 160Mbps; therefore, I believe you links is ok.
by jazier
Mon Oct 08, 2012 6:34 pm
Forum: Wireless Networking
Topic: Nstreme dual bandwidth test problem
Replies: 3
Views: 1349

Re: Nstreme dual bandwidth test problem

Hi,
You can measure the bandwidth using JPERF software.
by jazier
Mon Oct 08, 2012 6:28 pm
Forum: Beginner Basics
Topic: Setup AP for groove 2Hn
Replies: 3
Views: 1137

Re: Setup AP for groove 2Hn

Dear Xentra, Groove 2Hn has license level 3 so setting up the device as access point for point to multipoint scenario is not possible. However, you can set up the device as access point only for point to point scenario in which it only will accept one client or station. For building up a point to po...
by jazier
Mon Oct 08, 2012 6:18 pm
Forum: General
Topic: RouterOS for x86 board is corrupted
Replies: 2
Views: 685

Re: RouterOS for x86 board is corrupted

Thanks for your suggestions. I will contact MikroTik support ASAP.
by jazier
Wed Oct 03, 2012 5:54 pm
Forum: General
Topic: RouterOS for x86 board is corrupted
Replies: 2
Views: 685

RouterOS for x86 board is corrupted

Dear friends, I have a problem that I would like to share with you. First, as you know when there is a RouterOS problem in Mikrotik boards we can use Netinstall for reinstalling RouterOS and the License is kept. I have a x86 board with license and RouterOS is corrupted (I can not access the board vi...
by jazier
Mon Aug 13, 2012 11:43 pm
Forum: RouterBOARD hardware
Topic: Gigabit PoE Problem
Replies: 11
Views: 4954

Re: Gigabit PoE Problem

Thanks a lot, I will take that into consideration.
by jazier
Wed Aug 08, 2012 8:54 pm
Forum: RouterBOARD hardware
Topic: Gigabit PoE Problem
Replies: 11
Views: 4954

Gigabit PoE Problem

hello falks, I have a problem that I would like to discuss with you. I have a RB800 and 2 RB435G and a pair of RBGPOE. 1. When I power RB800 or RB435G via RBGPOE (Ether 1 port) the association rate with my computer is 100Mbps. 2. when I power routerboards with RBGPOE and I connect my computer to Eth...