I've had my Mikrotik Hap AC for a few years. Over that time I've had three Android phones. All three have experienced intermittent WiFi disconnection and re-connection every few minutes. I've narrowed it down to the following combination 1. Android phones (3 different phones). No issues with other d...
this was bugging me. i even returned a couple of android devices. I think i have found the cause, in my case i had to disable ipv6 on the mikrotik entirely... i don't know why but now my android devices stay on wifi
VPN providers are becoming more popular, and due to my countries recent data retention policies I'm considering one. I plan to have it setup on the Mikrotik to encrypt the whole subnet (a seperate VLAN in my case, really only 2-3 devices) I don't really wan't to use PPTP. Can anyone recommend one? W...
This device is just an access point. I just want to check that I have implemented my VLANS right. I've used Cisco gear in the past but I am new to Mikrotik. The bonded interface is a trunk port to my switch. My switch has a trunk connection to my router which is doing the inter-vlan routing. (Router...
what worked for me was setting the MTU and L2 MTU values on the physical interface (in my case ether1) to match the ones on the PPPoE interface. I set them at 1492 but your ISP may differ
hi I am trying to use the /system ssh client on RouterOS to access a HP switch on my LAN running Comware OS v5. When I ssh I am immediately bounced back to the cmd line on the Mikrotik [admin@Tim-HexLite] > /system ssh 192.168.0.10 user=admin port=22 Welcome back! [admin@Tim-HexLite] > I turned on S...
in case this helps, i had the same problem. i think i fixe it by setting the mtu and max mtu values on my ether1 physical wan interface to match the pppoe virtual interface (my isp advised 1492) and the problem went away
I've changed the MTU and L2 MTU settings on the ether1 interface to match the pppoe virtual interface to match and there don't seem to be anymore errors. so i'm hoping that has fixed the problem???
here is the connection details: [admin@HexLite] > /interface pppoe-client print Flags: X - disabled, R - running 0 R name="pppoe-outside" max-mtu=1492 max-mru=1492 mrru=disabled interface=ether1-gateway user="my-username@internode.on.net" password="abcdefg" profile=defa...
Good morning I have a TP-Link TD-8960N ADSL 2+ modem, in bridge mode to a Mikrotik Hex Lite. The hex lite, handles the pppoe connection to my ISP. I cannot seem to get the pppoe connection to stay up for more than a day, it runs for a few hours, then drops out and re-connects. I've checked the modem...
Did you every discover a solution to this, I am experiencing the same thing with a hex lite and a tp-link 8960N in bridge mode. 5-10 disconnections per day. Modem doesn't drop sync it's the pppoe on the router.
Hi Is it possible to set up a site to site, IPSec VPN between two routerOS devices, if only one side has a static public IP address? The other site has a dynamic address. If so, is there a guide on how to do this? If not, what would be the next best option. I don't want to use PPTP or OpenVPN. Thank...
hi i am about to switch from a billion router to routeros. most of the things i need to be able to do i am confident i can. however i can't find out how to do qos. i have a siemens gigaset a580ip ip phone that will be plugged into the router with ip 192.168.1.50. how do i setup qos in routeros to pr...