MikroTik

sindudas

I suppose you did not think about making a supout of cap and capsman controller for further investigation ?

at this point it looks like it will be the way to go

sindudas

Making a MAC change on the LANBridge of the Router/CAPsMAN (a brief connectivity outage for the CAPs) has caused the CAP that was not working to be disconnected and re-provisioned. This might indicate that the problem lies in configuration of CAPsMAN itself, not of CAP devices. So you may want to s...

sindudas

In less than 12 hours a CAP has already failed. Now for 12 hours it has been without Wi-Fi associations. On the CAP no log messages, only the last "CAP joined <CAPsMAN NAME> (MAC/15/0). Pressing the button "PROVISION" on the Radio Tab from CAPsMAN makes no changes. Making a MAC change...

sindudas

You were told to reset to CAP mode. Then there is no need to configure anything at all Reset button The reset button has three functions: Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more ...

sindudas

This way of configuring it is from a long time ago, when it comes to avoiding problems with VLANs. Possibly some bug at that time or some problem with the configuration. Now the two cAP ac and the RB951G-2HnD factory reset and configured the minimum. Nothing in the wireless part and in the bridge on...

sindudas

Right now I have a CAP that is not working since last night. There is nothing in the CAPsMAN or CAP log, I have forced "Provision" to the radio from CAPsMAN, but nothing changes. And here the config from one CAP: /interface bridge add admin-mac=XXXX auto-mac=no name=bridge_LAN protocol-mod...

sindudas

Hi, I have a hAP ac2 as the CAPsMAN and CAP, 2 cAP ac and a RB951G-2HnD. Usually I have to press the "provision" button and many others restart the device (CAP) for the Radio to work again. I mostly have 2.4Ghz IoT devices, and I usually detect that a Radio fails because the IoT devices ha...

sindudas

webproxy on hAP lite still doesn't work. Since versions 6.45.x First try, its showed on "Web Proxy Connections" the server and client connection, but Browser never loaded the requested web. The next web requests ends with "connection timeout". Is there plans to correct that issue?

sindudas

v6.48beta48, webproxy on hAP lite still doesn't work. Since versions 6.45.x First try, its showed on "Web Proxy Connections" the server and client connection, but Browser never loaded the requested web. The next web requests ends with "connection timeout". Is there plans to corre...

sindudas

On devices with small NANDs (16 MB), /system package update download downloads files to RAM disk. Using "/tool fetch" or "/system package update download" put it on disk (NAND), I can see on "/system resources" dropping down "Free HDD Space" and not "Fre...

sindudas

I'm using "/tool fetch" to download specific firmware version on the router through a script, on a "hAP lite" But I'm getting troubles now with version 6.42.12 trying to download firmware file 6.43.13. Failing because of no space left on disk. If I download 6.43.13 (long-term) wi...

sindudas

I think there is a Bug that wasn't in 6.42.12: Running that command on 6.42.12 works: :log info ([/interface pppoe-client monitor pppoe-WAN as-value]->"status") It's not a bug it's a feature :) Now you need to add "once" after an interface name. This seems like some kind of joke...

sindudas

I think there is a Bug that wasn't in 6.42.12: Running that command on 6.42.12 works: :log info ([/interface pppoe-client monitor pppoe-WAN as-value]->"status") but when running the same on 6.43.13 it doens't end executing that command. But if you try this it works: /interface pppoe-client...

sindudas

I got a Script on some routers, with that command in it to erase all files. Its because small space on hAP lite and trying to upgrade the router. /file remove [find] It fails, mainly when exist the file "auto-before-reset.backup". Done a simple script like this other, works where the other...

sindudas

On a wAP R LTE reports:

/interface lte info number=0
rsrp: -100dBm
rsrq: -15dB
sinr: -2dB
cqi: 4

But on Winbox:
RSRQ: -1.5 dB

Before update from 6.43.7 => 6.37.8 shows:
RSRQ: -15dB

What value is correct? As in changelog tells that:
*) lte - increased reported "rsrq" precision;

sindudas

I've purchased 7 CSS326-24G-2S+ with 7 SFP+ 1m direct attach cable, for mount a ring using RSTP. Connecting on one unit, and doing PING to all units, all replies to ICMP except one unit that loses some time, some time not. Breaking the loop, it works as expected. Tried a small ring with only 3 switc...

sindudas

This issue is breaking some scripts. On terminal: /system leds set numbers=0 type= align-down align-right ap-cap flash-access interface-... modem-technology on poe-out wireless-status align-left align-up fan-fault gps-valid modem-signal off poe-fault wireless-signal-strength It show "on" a...

sindudas

Hi! I'm trying to upload a Script to be the default configuration on the Branding Maker. When the file is uploaded, "/autorun.scr" file appears on the "Uploaded Files" list. Clicking on it opens a blank web. The other files (images, html, css) shows its contents Ok, but the "...

sindudas

I use a custom default configuration script (installed with NetInstall + "Configure Script" parameter), but since v6.40.x, it stop uploading the Script. Tried a simple script: /system package disable hotspot disable mpls disable routing enable ipv6 enable dhcp enable ppp But it does nothin...

sindudas

@andirys and mikrotik

*) bridge - implemented software based MSTP;
thank you for making this happen

+1

sindudas

In such cases use something like this

while ([:len [/interface find]] < X) do={:delay 1}

Replace X with actual total number of interfaces on the router.

I'll do it that way.

Thanks!

sindudas

Something changed on 6.40.x? Maybe a bug that will be resolved? This is a bug that has existed longer than that. I encountered it long ago when trying to configure wireless routers like that. But only recently I saw it mentioned in another topic and it was explained why it fails. The problem is tha...

sindudas

Hi, Since v6.33 to 6.39.2 we put on RB941-2nD (hAP lite) our autoprovisioning script .RSC with NetInstall. Now with 6.40.1 and 6.40.2, this Script doesn't work as expected. It downloads the config from a https server, this part works. But when executes: /system reset-configuration no-default=yes run...

sindudas

Forbidden

You don't have permission to access /link/mikrotik-vlan-add.jpeg on this server.

It should work now. Sorry, it was geoip restrictions

sindudas

sindudas - You should be able to add up to 30 interfaces. Are you sure that simply menu did not go out of your computer display?

sindudas

sindudas - You should be able to add up to 30 interfaces. Are you sure that simply menu did not go out of your computer display? I'm really sure that it can't be selected more than 25. It turns the down arrow in grey, disabled. My screen is much bigger, it is not a display problem, but it does not ...

sindudas

How do i have to do to upgrade CRS326-24G-2S+ ? On tab "upgrade" it shows current version 2.0p and latest available versión 2.3, but clicking on "Download&Upgrade" tells "Could not retrieve firmware". And on downloads page, the are two files, one for new RB260GS(CSS...

sindudas

Bug on Winbox, configuring VLAN on a CRS326-24G-2S+ With firmware 6.39.2 and 6.40rc32.

If you try to set a new VLAN with all ports, on winbox you only can put 25 interfaces, but switch has 27 including CPU.
Setting via CLI its possible, but when you open on Winbox, the field Ports shows in Red.

sindudas

On RB133 (mipsle), using Check For Updates and "channel" current selected, it tells "Latest Version" is 6.35.1, but at www.mikrotik.com/download latest version for MIPSLE is 6.32.4.

sindudas

Upgrading 911G-5HPnD (QRT 5) from 6.34.2 to 6.35.1 using it as Mesh Portal. When upgraded the Mesh interface disappear from Mesh interfaces. Downgrade to 6.35 and it appear again. Other unit (RB433) connected via mesh + wds slave to the Mesh Portal board (before upgrading the QRT 5 board), upgraded ...

sindudas

sindudas, what RouterBOARD do you use? I tried the same on my CCR board, everything worked fine.

Screenshot 2015-10-23 15.27.48.png

Tested in hAP lite (smips).

Have you used the CA cert? Or have you used the Cert signed with your CA?

sindudas

Certificate got issues. Version 6.32.3, 6.33rc29 and 6.33rc30. Downgrade to 6.30.4 it works. When try to create CA and self-signed to use in www-ssl, it doesn't work. Can't open Router using www-ssl. If you create on 6.30.4, then upgrade to 6.32.3, it works, you can access to the router by www-ssl....

sindudas

Certificate got issues. Version 6.32.3, 6.33rc29 and 6.33rc30. Downgrade to 6.30.4 it works. When try to create CA and self-signed to use in www-ssl, it doesn't work. Can't open Router using www-ssl. If you create on 6.30.4, then upgrade to 6.32.3, it works, you can access to the router by www-ssl. ...

sindudas

What about the support ADSL/VDSL/... in Mikrotik?
It will be possible, Normis?

Regards

sindudas

Hi, I've been using version 3 of Winbox from Beta versions until the last RC 5. Since the RC versions I appreciated the lack of some options in RouterOS v5.x -> v2.9.x , such as : Main menu -> Wireless, PPP, IPv6, MPLS, Routing,... Sub menu -> IP/DHCP Client, IP/DHCP Relay, IP/DHCP Server, IP/HotSpo...

sindudas

What if you set it to "forced on"? "Auto on" or "Forced On" the same result. Trying to power the Rocket M4 in ether4, with "auto on" or "forced on" at ether5, makes power at ether4 reset faster. And if I unplug de RocketM5 from ether4, red light fro...

sindudas

Upgrading to the new POE firmware (previous 1.10, and new 2.0) on RB750UP got problemes on ether5 when connecting a Rocket M5 to it. With PoE firmware 1.10 it works well, but upgrading it to 2.0, it continously reboots de Rocket M5. We try it with two RB750UP units, and does the same. If set "P...

Search found 37 matches

Re: CAPsMAN v7.x CAPs Radio's stop working

Re: CAPsMAN v7.x CAPs Radio's stop working

Re: CAPsMAN v7.x CAPs Radio's stop working

Re: CAPsMAN v7.x CAPs Radio's stop working

Re: CAPsMAN v7.x CAPs Radio's stop working

Re: CAPsMAN v7.x CAPs Radio's stop working

CAPsMAN v7.x CAPs Radio's stop working

Re: v6.48.1 [stable] is released!

Re: v6.48beta [testing] is released!

Re: /tool fetch with space restrictions?

/tool fetch with space restrictions?

Re: v6.43.13 [long-term] is released!

Re: v6.43.13 [long-term] is released!

Why sometimes fails => /file remove [find]

Re: v6.43.8 [stable] is released!

CSS326-24G-2S+ RSTP Ring Doesn't work

Re: v6.42.1 [current]

Branding Maker + Default Configuration / autorun.scr

Re: v6.40.3 [current]

Re: v6.41rc [release candidate] is released! New bridge implementation!

Re: v6.40.2 [current]

Re: v6.40.2 [current]

Re: v6.40.2 [current]

Re: v6.40rc [release candidate] is released!

Re: v6.40rc [release candidate] is released!

Re: v6.40rc [release candidate] is released!

Re: SwOS version 2.3 released!

Re: v6.40rc [release candidate] is released!

Re: v6.35.1 [current] is released!

Re: v6.35.1 [current] is released!

Re: 6.32.3 [CURRENT] version released!

Re: 6.32.3 [CURRENT] version released!

Re: 6.32.3 [CURRENT] version released!

Re: SFP and DSL support

Re: Winbox 3 RC

Re: v5.20 released

Re: v5.20 released