There is a bug in OSPFv3, RIPng, BGP for years I guess. Please see:

http://forum.mikrotik.com/viewtopic.php?f=2&t=77371

ROS 6 supports DNS in DHCPv6. Select "Other Configuration" in ND and deselect "Advertise DNS". Then add DHCPv6 server without pool. However, unlike IPv4, you should define IPv6 DNS in "IP" -> "DNS". It can't be defined in DHCPv6 or pool.

I can confirm both RIPng and OSPFv3 have this problem in ROS 6.15.

http://forum.mikrotik.com/viewtopic.php ... 00#p432823

Only Apple IOS gets DNS advertisement in RA.
Windows gets DNS in DHCPv6. However, Mikrotik does not support it in DHCPv6 configuration.

This bug is still exist in RouterOS 6.15 both RIPng and OSPFv3.

http://forum.mikrotik.com/viewtopic.php ... 00#p432823

Problem of OSPFv3 Adjacency will not be established between two SSTP ends if two routers generate the same link-local address on interfaces. even through address is on unrelated interface. This example is fe80::14. 064.png The workaround is to delete link-local address if it is on unrelated interfac...

IPv6 BGP bug
BGP added a wrong route to route table. OSPF is correct. BGP peer with IPv4 address.

My path to make Routing Marks work.

6.14 -- work
6.14 to 6.15 -- NOT work
6.15 to 6.13 -- NOT work
6.13 to 6.14 -- NOT work
6.14 to 6.7 -- work
6.7 to 6.14 -- work

So weird

After several hours troubleshot, I found the clock problem in the RouterOS 6.8+ will cause Certificates problems. Because RouterOS will simply think remote Certificates are not valid in 1970.

Routing mark does not work again.

Log data and time does not sync to NTP server after reboot.

Verify Server Certificate on SSTP doesn't work

6.14 SSTP client to 5.26 SSTP server doesn't work.
SSTP client log: handsharke failed (6)
SSTP server log: tls shutdown

6.13 SSTP client to 5.26 SSTP server works.

Verify Server Certificate on SSTP doesn't work

6.14 SSTP client to 5.26 SSTP server doesn't work.
SSTP client log: handsharke failed (6)
SSTP server log: tls shutdown

6.13 client to 5.26 server works.

SSTP connects 6.11 and 5.26 failed with "tls shutdown". Downgrade to 6.7 solved problem.

Routing Mark problem returns on my RB2011L. Downgrade to 6.7 solved the problem.

Kernal failure on my RB951-2n days before with 6.10.

I solved problem. It's misconfiguration.

Connection mark of IP address A to B not only marks the session of A and B. besides that, connection mark also mark all related traffic. For example, ICMP control traffic from intermediate route between A and B. I missed it.

Add another screenshot.

Packet Sniffer of inside IP (traceroute) is normal.

Packets routing is normal except tracing routes an IP address outside NAT. My diagram: traceroute.png Traceroute result is normal for IP address inside NAT. But timeout two hop for IP address outside NAT: 273.png Packet Sniffer of outside IP (traceroute). I found packets was routed to wrong interfac...

just upgraded 2011UAS-2HnD to 6.10. Confirmed that mangle routing marks are working now. I had a problem with mangle rules not sending traffic to the proper routing table via "action=mark routing" in 6.9. Working now in 6.10 :). Upgraded my RB2011L to 6.10. Routing mark works. Doesn't see...

ROS 6.9 broke Routing Mark on my RB2011L. But it doesn't have same problem on my RB951-2n.

It's so weird. After I upgraded my RB2011L from 6.7 to 6.9. Routing Mark in "/ip route" doesn't work. It just like add a standby route in Main table. The color is blue in WinBox. I can't find any workaround for it, so I downgrade my RB2011L to 6.7. However, There is no problem on my RB951-...

pptp appears broke, trying to manage winbox while in the tunnel, different sections are blank, then winbox shows disconnected Same problem here! The PPTP session itself stays on, as well as a RDP session. Winbox in the RDP session is also fine, but a Winbox session through the VPN tunnel (PPTP) is ...

Issue: DNS cache does not update for static DNS name change Description: DNS cache will add new record instead of update when you change a static DNS name. Versions affected: 6.6 How to reproduce: Add a static DNS record with name "test.local" and address "192.168.8.1", then chan...

Issue: Source IP of web proxy can't be configured in WinBox and WebFig. Configure it in terminal is Ok. Description: Configure source IP address of web proxy in Web Fig will simply not show. Configure it in WinBox will course inconsistency display of WinBox and Terminal, and it does not become effec...

Source IP address of Web Proxy can't be configurated in Winbox and WebFig. but it's OK in terminal.

Port 1, Master port

I have a 2011 too. For your scenario. Hardware (Atheros8327) forwarding port 1,2,3. Port 1 as master Software bridge port 4 to port1 sub-interface VLAN 10 Software bridge port 5 to port1 sub-interface VLAN 20 Do not need to change anything within "Switch" menu. Atheros8327 unable to strip/...

When I replaced RB2100L to RB250GS, transfer speed was normal. So I know it's software bridge problem. I reconfigure it with hardware (Atheros8327) forwarding. It's OK now. However, I lost feature below. Can't monitor TX/RX speed. Can't torch traffic. Can't select VLAN to attach to interface. all br...

I think there is a bug in Bridge code. I bought a NAS, so I configured MTU size 4074 (4070 for VLAN) on RB2011L, NAS and computer to get better performance. The speed started at 45 MBps, then reduced to 5 MBps within 5 seconds. Normal speed is 35 MBps at MTU 1500. When I decreased MTU size to 3000 a...