Hi, We found a bug in recent RouterOS versions (> 6.38) where sometimes disabled objects are not found by Winbox or Scripts. As you can see in the attached print, sometimes when you try to enable a disabled tunnel you get a "object doesn't exist" message. After two or three attemps it's su...

[admin@RB2011-ESCRITORIO] /caps-man manager interface> print Flags: * - default, X - disabled, D - dynamic # INTERFACE FORBID 0 * all no If I allow connections on all interfaces it does work, still thru L3 [admin@RB2011] /caps-man remote-cap> print brief # ADDRESS NAME STATE RADIOS 0 4C:5E:0C:F2:6B...

You mean from Manager > Interfaces or Bridge > Ports? [admin@RB2011] /caps-man manager interface> print Flags: * - default, X - disabled, D - dynamic # INTERFACE FORBID 0 * all yes 1 bridge-local no the wlan interface is not assigned to the bridge-local bridge

You don't seem to have a discovery interface selected, probably because you are trying a layer3 connection. I use: /interface wireless cap set discovery-interfaces=bridge1 enabled=yes interfaces=wlan1 In your case it is probably bridge-local, and remove the capsman IP, then it will use L2 to find t...

you can add the log=yes option for the drop rules to see if the CAP connections are dropped by the firewall or not. I will add the logging, but my only drop rules are based on WAN interfaces. As you can see on the attached image, the connection is estabilished, but for some reason it's not provisio...

How do you have them provisioned? Based on mac or Default 00.00.00.00.00.00? And have you tried to reboot after changing setting? Also might want to move firewall to the top of the list. David Huizenga Provisioned with detault 00:00:00:00:00:00 mac address. Remember: I have two other RB951Ui on the...

Didn't work: [admin@RB2011] /ip firewall filter> print terse 0 comment=CAP chain=output action=accept protocol=udp src-address=127.0.0.1 dst-address=127.0.0.1 port=5246,5247 log=no log-prefix="" 1 comment=CAP chain=input action=accept protocol=udp src-address=127.0.0.1 dst-address=127.0.0....

I'm trying to setup a CAPsMAN, configured the controller (RB2011) and the first CAP client (RB951Ui) The client connects fine and is provisioned as expected 01:21:02 caps,info CAP selected CAPsMAN RB2011 (D4:CA:6D:62:FC:XX/11/0) 01:21:05 caps,info CAP connected to RB2011 (D4:CA:6D:62:FC:XX/11/0) 01:...

The DDNS feature will make my life easier, thanks.

Yes, this seems to be a bug in Mikrotik, the script runs well on scheduler but not thru the Run Script button

which ports handle the load?

If you are using ports 12 or 13 I would recommend switching to other ports, since those are connected thru a PCI-e chip that has low cpu priority.

http://i.mt.lv/routerboard/files/Block-RB1100AHx2.pdf

@rajo,

Thousands already reported this bug but Mikrotik insist in adding features instead resolving basic bugs like this.

It seems they only will listen to the community and bug reports when they start to lose customers

I'm trying to set up a basic IPSec VPN between 2 metarouters and it does not work with MODE-CFG/XAUTH/Generate Policy (Road Warrior setup with Mode Conf) I saw some reports of this problem on the forum. Did anyone experience the same problem? I followed the steps described on http://wiki.mikrotik.co...

I was wondering if is it possible to use the mode-cfg + xauth for a site-to-site tunnel when only Dynamic IP is available at the remote site? I know that it is possible to achieve such results using lots of scripts to update IPs, but using mode-cfg would make things much more simple. Did anyone try ...

Mikrotik lives in a world where everybody has static IP addresses

Use this script until they realize there are plenty of use for hostname on remote peers

http://forum.mikrotik.com/viewtopic.php?f=9&t=73888

Folks, Since RouterOS doesn't allow specifying a hostname for remote peers on VPN connections, I've made a single script that can be used for almost any type of VPN (tested with L2TP, PPTP and OVPN) Suggestions are welcome #****************************************************************************...

Don't know yours, but mine works fine and has far more features

http://forum.mikrotik.com/viewtopic.php?f=9&t=65013

In my configuration, with RouterOS v6 ipsec will not work if the first request will be made from RB1100AHx2 to any Mips router with v6, also it will not work from RB1000 to RB1100AHx2. But if the request is coming from a mips device, the RB1100AHx2 will accept it and IPSec will work. The upgrade fi...

It is planned, but I cannot give you any timeframes.

Maybe after fixing the issues with L2TP (multi wan support) and OVPN (UDP + LZO) in IPv4?

What is the error?

Run in console (/system script run script-name) and paste the output here pls

I'm sure it works, because I use this version too

+1 for this problem, Samsung Galaxy S2 (I have two devices, problem happens with both)

It is really annoying and it is impossible to keep the wifi while device is in idle mode, and it EAT all my mobile data plan.

Was on 5.2x, upgraded to 6rc7, same problem

Mate, use my script: http://forum.mikrotik.com/viewtopic.php?f=9&t=65013

It works pretty well with changeip

Any workaround for the fetch command not supportingn the HTTP METHOD?

I would like to reset my ADSL modem, but I have two choices

1) Issue a HTTP POST request
2) Issua a TELNET command

Both ways seems impossible using Mikrotik scripts. Any advise would be welcome.

Thanks

How about this script? http://forum.mikrotik.com/viewtopic.php?f=9&t=65013

How about this script? http://forum.mikrotik.com/viewtopic.php?f=9&t=65013

Hi, I see many scripts for different providers or situations. This script is aimed to work as many situations and providers as possible, no matter if you are behind a NAT or have a public IP. As a plus, you get a "Force update every X days" feature. If you think this script is useful, I ca...